From d3691813b05c654342fd01dfe3fff9a72828ebe7 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 18 Jul 2018 09:04:12 +0200 Subject: [PATCH] mtd: rawnand: fix indentation in Kconfig Rules about Kconfig are simple but in the raw NAND directory indentation is somehow archaic. Fix the indentation in the whole file. Signed-off-by: Miquel Raynal --- drivers/mtd/nand/raw/Kconfig | 94 ++++++++++++++++++++++---------------------- 1 file changed, 47 insertions(+), 47 deletions(-) diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 1488ad0..2460fc1 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -44,12 +44,12 @@ config MTD_NAND_DENALI tristate config MTD_NAND_DENALI_PCI - tristate "Support Denali NAND controller on Intel Moorestown" + tristate "Support Denali NAND controller on Intel Moorestown" select MTD_NAND_DENALI depends on PCI - help - Enable the driver for NAND flash on Intel Moorestown, using the - Denali NAND controller core. + help + Enable the driver for NAND flash on Intel Moorestown, using the + Denali NAND controller core. config MTD_NAND_DENALI_DT tristate "Support Denali NAND controller as a DT device" @@ -80,7 +80,7 @@ config MTD_NAND_OMAP2 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST depends on HAS_IOMEM help - Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 + Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 and Keystone platforms. config MTD_NAND_OMAP_BCH @@ -138,7 +138,7 @@ config MTD_NAND_NDFC depends on 4xx select MTD_NAND_ECC_SMC help - NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs + NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs config MTD_NAND_S3C2410_CLKSTOP bool "Samsung S3C NAND IDLE clock stop" @@ -170,40 +170,40 @@ config MTD_NAND_DISKONCHIP these devices. config MTD_NAND_DISKONCHIP_PROBE_ADVANCED - bool "Advanced detection options for DiskOnChip" - depends on MTD_NAND_DISKONCHIP - help - This option allows you to specify nonstandard address at which to - probe for a DiskOnChip, or to change the detection options. You - are unlikely to need any of this unless you are using LinuxBIOS. - Say 'N'. + bool "Advanced detection options for DiskOnChip" + depends on MTD_NAND_DISKONCHIP + help + This option allows you to specify nonstandard address at which to + probe for a DiskOnChip, or to change the detection options. You + are unlikely to need any of this unless you are using LinuxBIOS. + Say 'N'. config MTD_NAND_DISKONCHIP_PROBE_ADDRESS - hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED - depends on MTD_NAND_DISKONCHIP - default "0" - ---help--- - By default, the probe for DiskOnChip devices will look for a - DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. - This option allows you to specify a single address at which to probe - for the device, which is useful if you have other devices in that - range which get upset when they are probed. - - (Note that on PowerPC, the normal probe will only check at - 0xE4000000.) - - Normally, you should leave this set to zero, to allow the probe at - the normal addresses. + hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED + depends on MTD_NAND_DISKONCHIP + default "0" + help + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option allows you to specify a single address at which to probe + for the device, which is useful if you have other devices in that + range which get upset when they are probed. + + (Note that on PowerPC, the normal probe will only check at + 0xE4000000.) + + Normally, you should leave this set to zero, to allow the probe at + the normal addresses. config MTD_NAND_DISKONCHIP_PROBE_HIGH - bool "Probe high addresses" - depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED - help - By default, the probe for DiskOnChip devices will look for a - DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. - This option changes to make it probe between 0xFFFC8000 and - 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be - useful to you. Say 'N'. + bool "Probe high addresses" + depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED + help + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option changes to make it probe between 0xFFFC8000 and + 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be + useful to you. Say 'N'. config MTD_NAND_DISKONCHIP_BBTWRITE bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP" @@ -345,13 +345,13 @@ config MTD_NAND_NANDSIM MTD nand layer. config MTD_NAND_GPMI_NAND - tristate "GPMI NAND Flash Controller driver" - depends on MXS_DMA - help - Enables NAND Flash support for IMX23, IMX28 or IMX6. - The GPMI controller is very powerful, with the help of BCH - module, it can do the hardware ECC. The GPMI supports several - NAND flashs at the same time. + tristate "GPMI NAND Flash Controller driver" + depends on MXS_DMA + help + Enables NAND Flash support for IMX23, IMX28 or IMX6. + The GPMI controller is very powerful, with the help of BCH + module, it can do the hardware ECC. The GPMI supports several + NAND flashs at the same time. config MTD_NAND_BRCMNAND tristate "Broadcom STB NAND controller" @@ -459,9 +459,9 @@ config MTD_NAND_SH_FLCTL for NAND Flash using FLCTL. config MTD_NAND_DAVINCI - tristate "Support NAND on DaVinci/Keystone SoC" - depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) - help + tristate "Support NAND on DaVinci/Keystone SoC" + depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) + help Enable the driver for NAND flash chips on Texas Instruments DaVinci/Keystone processors. @@ -489,7 +489,7 @@ config MTD_NAND_JZ4740 tristate "Support for JZ4740 SoC NAND controller" depends on MACH_JZ4740 help - Enables support for NAND Flash on JZ4740 SoC based boards. + Enables support for NAND Flash on JZ4740 SoC based boards. config MTD_NAND_JZ4780 tristate "Support for NAND on JZ4780 SoC" -- 2.7.4