From d31e53b42c35a9285c1e688733ceaa995689418b Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 23 Oct 2012 09:40:22 +0000 Subject: [PATCH] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board The P5040DS reference board (a.k.a "Superhydra") is an enhanced version of P3041DS/P5020DS ("Hydra") reference board. Signed-off-by: Timur Tabi Signed-off-by: Shaohui Xie Signed-off-by: Andy Fleming --- board/freescale/common/Makefile | 2 + board/freescale/common/ngpixis.h | 2 +- board/freescale/corenet_ds/Makefile | 2 + board/freescale/corenet_ds/corenet_ds.c | 22 +- board/freescale/corenet_ds/eth_superhydra.c | 722 ++++++++++++++++++++++++++++ board/freescale/corenet_ds/p5040ds_ddr.c | 18 + boards.cfg | 1 + drivers/net/fm/Makefile | 1 + drivers/net/fm/p5040.c | 113 +++++ include/configs/P5040DS.h | 40 ++ 10 files changed, 916 insertions(+), 7 deletions(-) create mode 100644 board/freescale/corenet_ds/eth_superhydra.c create mode 100644 board/freescale/corenet_ds/p5040ds_ddr.c create mode 100644 drivers/net/fm/p5040.c create mode 100644 include/configs/P5040DS.h diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 36f7c4f..75725b4 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o +COBJS-$(CONFIG_P5040DS) += ics307_clk.o COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o # deal with common files for P-series corenet based devices @@ -60,6 +61,7 @@ SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P3041DS) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o +SUBLIB-$(CONFIG_P5040DS) += p_corenet/libp_corenet.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h index 1d4483d..a239ee3 100644 --- a/board/freescale/common/ngpixis.h +++ b/board/freescale/common/ngpixis.h @@ -45,7 +45,7 @@ typedef struct ngpixis { struct { u8 sw; u8 en; - } s[8]; + } s[9]; /* s[0]..s[7] is SW1..SW8, and s[8] is SW11 */ } __attribute__ ((packed)) ngpixis_t; /* Pointer to the PIXIS register set */ diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile index 1fdf8b7..d79193a 100644 --- a/board/freescale/corenet_ds/Makefile +++ b/board/freescale/corenet_ds/Makefile @@ -31,9 +31,11 @@ COBJS-y += ddr.o COBJS-$(CONFIG_P3041DS) += eth_hydra.o COBJS-$(CONFIG_P4080DS) += eth_p4080.o COBJS-$(CONFIG_P5020DS) += eth_hydra.o +COBJS-$(CONFIG_P5040DS) += eth_superhydra.o COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o +COBJS-$(CONFIG_P5040DS) += p5040ds_ddr.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index a33c936..21428e3 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -45,6 +45,7 @@ int checkboard (void) struct cpu_type *cpu = gd->cpu; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; + static const char * const freq[] = {"100", "125", "156.25", "212.5" }; printf("Board: %sDS, ", cpu->name); printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", @@ -83,20 +84,28 @@ int checkboard (void) * don't match. */ puts("SERDES Reference Clocks: "); -#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \ + || defined(CONFIG_P5040DS) sw = in_8(&PIXIS_SW(5)); for (i = 0; i < 3; i++) { - static const char *freq[] = {"100", "125", "156.25", "212.5" }; unsigned int clock = (sw >> (6 - (2 * i))) & 3; printf("Bank%u=%sMhz ", i+1, freq[clock]); } +#ifdef CONFIG_P5040DS + /* On P5040DS, SW11[7:8] determines the Bank 4 frequency */ + sw = in_8(&PIXIS_SW(9)); + printf("Bank4=%sMhz ", freq[sw & 3]); +#endif puts("\n"); #else sw = in_8(&PIXIS_SW(3)); - printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100); - printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125"); - printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125"); + /* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */ + /* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */ + /* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */ + printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]); + printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]); + printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]); #endif return 0; @@ -168,7 +177,8 @@ int misc_init_r(void) unsigned int i; u8 sw; -#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \ + || defined(CONFIG_P5040DS) sw = in_8(&PIXIS_SW(5)); for (i = 0; i < 3; i++) { unsigned int clock = (sw >> (6 - (2 * i))) & 3; diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c new file mode 100644 index 0000000..ef9de25 --- /dev/null +++ b/board/freescale/corenet_ds/eth_superhydra.c @@ -0,0 +1,722 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Author: Srikanth Srinivasan + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file handles the board muxing between the Fman Ethernet MACs and + * the RGMII/SGMII/XGMII PHYs on a Freescale P5040 "Super Hydra" reference + * board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are + * provided by the standard Freescale four-port SGMII riser card. The 10Gb + * XGMII PHYs are provided via the XAUI riser card. The P5040 has 2 FMans + * and 5 1G interfaces and 10G interface per FMan. Based on the options in + * the RCW, we could have upto 3 SGMII cards and 1 XAUI card at a time. + * + * Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control + * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is + * always the same (0). The value for SGMII depends on which slot the riser is + * inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII, + * the value is based on which slot the XAUI is inserted in. + * + * The SERDES configuration is used to determine where the SGMII and XAUI cards + * exist, and also which Fman's MACs are routed to which PHYs. So for a given + * Fman MAC, there is one and only PHY it connects to. MACs cannot be routed + * to PHYs dynamically. + * + * + * This file also updates the device tree in three ways: + * + * 1) The status of each virtual MDIO node that is referenced by an Ethernet + * node is set to "okay". + * + * 2) The phy-handle property of each active Ethernet MAC node is set to the + * appropriate PHY node. + * + * 3) The "mux value" for each virtual MDIO node is set to the correct value, + * if necessary. Some virtual MDIO nodes do not have configurable mux + * values, so those values are hard-coded in the DTS. On the HYDRA board, + * the virtual MDIO node for the SGMII card needs to be updated. + * + * For all this to work, the device tree needs to have the following: + * + * 1) An alias for each PHY node that an Ethernet node could be routed to. + * + * 2) An alias for each real and virtual MDIO node that is disabled by default + * and might need to be enabled, and also might need to have its mux-value + * updated. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/ngpixis.h" +#include "../common/fman.h" + +#ifdef CONFIG_FMAN_ENET + +#define BRDCFG1_EMI1_SEL_MASK 0x70 +#define BRDCFG1_EMI1_SEL_SLOT1 0x10 +#define BRDCFG1_EMI1_SEL_SLOT2 0x20 +#define BRDCFG1_EMI1_SEL_SLOT5 0x30 +#define BRDCFG1_EMI1_SEL_SLOT6 0x40 +#define BRDCFG1_EMI1_SEL_SLOT7 0x50 +#define BRDCFG1_EMI1_SEL_SLOT3 0x60 +#define BRDCFG1_EMI1_SEL_RGMII 0x00 +#define BRDCFG1_EMI1_EN 0x08 +#define BRDCFG1_EMI2_SEL_MASK 0x06 +#define BRDCFG1_EMI2_SEL_SLOT1 0x00 +#define BRDCFG1_EMI2_SEL_SLOT2 0x02 + +#define BRDCFG2_REG_GPIO_SEL 0x20 + +/* + * BRDCFG1 mask and value for each MAC + * + * This array contains the BRDCFG1 values (in mask/val format) that route the + * MDIO bus to a particular RGMII or SGMII PHY. + */ +static struct { + u8 mask; + u8 val; +} mdio_mux[NUM_FM_PORTS]; + +/* + * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means + * that the mapping must be determined dynamically, or that the lane maps to + * something other than a board slot + */ +static u8 lane_to_slot[] = { + 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0, 0, 0 +}; + +/* + * Set the board muxing for a given MAC + * + * The MDIO layer calls this function every time it wants to talk to a PHY. + */ +void super_hydra_mux_mdio(u8 mask, u8 val) +{ + clrsetbits_8(&pixis->brdcfg1, mask, val); +} + +struct super_hydra_mdio { + u8 mask; + u8 val; + struct mii_dev *realbus; +}; + +static int super_hydra_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct super_hydra_mdio *priv = bus->priv; + + super_hydra_mux_mdio(priv->mask, priv->val); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int super_hydra_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct super_hydra_mdio *priv = bus->priv; + + super_hydra_mux_mdio(priv->mask, priv->val); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int super_hydra_mdio_reset(struct mii_dev *bus) +{ + struct super_hydra_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static void super_hydra_mdio_set_mux(char *name, u8 mask, u8 val) +{ + struct mii_dev *bus = miiphy_get_dev_by_name(name); + struct super_hydra_mdio *priv = bus->priv; + + priv->mask = mask; + priv->val = val; +} + +static int super_hydra_mdio_init(char *realbusname, char *fakebusname) +{ + struct super_hydra_mdio *hmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate Hydra MDIO bus\n"); + return -1; + } + + hmdio = malloc(sizeof(*hmdio)); + if (!hmdio) { + printf("Failed to allocate Hydra private data\n"); + free(bus); + return -1; + } + + bus->read = super_hydra_mdio_read; + bus->write = super_hydra_mdio_write; + bus->reset = super_hydra_mdio_reset; + sprintf(bus->name, fakebusname); + + hmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!hmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(hmdio); + return -1; + } + + bus->priv = hmdio; + + return mdio_register(bus); +} + +/* + * Given the following ... + * + * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' + * compatible string and 'addr' physical address) + * + * 2) An Fman port + * + * ... update the phy-handle property of the Ethernet node to point to the + * right PHY. This assumes that we already know the PHY for each port. That + * information is stored in mdio_mux[]. + * + * The offset of the Fman Ethernet node is also passed in for convenience, but + * it is not used. + * + * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. + * Inside the Fman, "ports" are things that connect to MACs. We only call them + * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs + * and ports are the same thing. + */ +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + enum srds_prtcl device; + int lane, slot, phy; + char alias[32]; + + /* RGMII and XGMII are already mapped correctly in the DTS */ + + if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + device = serdes_device_from_fm_port(port); + lane = serdes_get_first_lane(device); + slot = lane_to_slot[lane]; + phy = fm_info_get_phy_address(port); + + sprintf(alias, "phy_sgmii_slot%u_%x", slot, phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + } +} + +#define PIXIS_SW2_LANE_23_SEL 0x80 +#define PIXIS_SW2_LANE_45_SEL 0x40 +#define PIXIS_SW2_LANE_67_SEL_MASK 0x30 +#define PIXIS_SW2_LANE_67_SEL_5 0x00 +#define PIXIS_SW2_LANE_67_SEL_6 0x20 +#define PIXIS_SW2_LANE_67_SEL_7 0x10 +#define PIXIS_SW2_LANE_8_SEL 0x08 +#define PIXIS_SW2_LANE_1617_SEL 0x04 +#define PIXIS_SW11_LANE_9_SEL 0x04 +/* + * Initialize the lane_to_slot[] array. + * + * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board + * slots is hard-coded. On the Hydra board, however, the mapping is controlled + * by board switch SW2, so the lane_to_slot[] array needs to be dynamically + * initialized. + */ +static void initialize_lane_to_slot(void) +{ + u8 sw2 = in_8(&PIXIS_SW(2)); + /* SW11 appears in the programming model as SW9 */ + u8 sw11 = in_8(&PIXIS_SW(9)); + + lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4; + lane_to_slot[3] = lane_to_slot[2]; + + lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6; + lane_to_slot[5] = lane_to_slot[4]; + + switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) { + case PIXIS_SW2_LANE_67_SEL_5: + lane_to_slot[6] = 5; + break; + case PIXIS_SW2_LANE_67_SEL_6: + lane_to_slot[6] = 6; + break; + case PIXIS_SW2_LANE_67_SEL_7: + lane_to_slot[6] = 7; + break; + } + lane_to_slot[7] = lane_to_slot[6]; + + lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0; + lane_to_slot[9] = (sw11 & PIXIS_SW11_LANE_9_SEL) ? 0 : 3; + + lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0; + lane_to_slot[17] = lane_to_slot[16]; +} + +#endif /* #ifdef CONFIG_FMAN_ENET */ + +/* + * Configure the status for the virtual MDIO nodes + * + * Rather than create the virtual MDIO nodes from scratch for each active + * virtual MDIO, we expect the DTS to have the nodes defined already, and we + * only enable the ones that are actually active. + * + * We assume that the DTS already hard-codes the status for all the + * virtual MDIO nodes to "disabled", so all we need to do is enable the + * active ones. + */ +void fdt_fixup_board_enet(void *fdt) +{ +#ifdef CONFIG_FMAN_ENET + enum fm_port i; + int lane, slot; + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_sg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", + alias, slot); + } + break; + case PHY_INTERFACE_MODE_RGMII: + fdt_status_okay_by_alias(fdt, "hydra_rg"); + debug("Enabled MDIO node hydra_rg\n"); + break; + default: + break; + } + } + + lane = serdes_get_first_lane(XAUI_FM1); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_xg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", alias, slot); + } + +#if CONFIG_SYS_NUM_FMAN == 2 + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + int idx = i - FM2_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_sg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", + alias, slot); + } + break; + case PHY_INTERFACE_MODE_RGMII: + fdt_status_okay_by_alias(fdt, "hydra_rg"); + debug("Enabled MDIO node hydra_rg\n"); + break; + default: + break; + } + } + + lane = serdes_get_first_lane(XAUI_FM2); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_xg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", alias, slot); + } +#endif /* CONFIG_SYS_NUM_FMAN == 2 */ +#endif /* CONFIG_FMAN_ENET */ +} + +/* + * Mapping of SerDes Protocol to MDIO MUX value and PHY address. + * + * Fman 1: + * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4 + * Mux Phy | Mux Phy | Mux Phy | Mux Phy + * Value Addr | Value Addr | Value Addr | Value Addr + * 0x00 2 1c | 2 1d | 2 1e | 2 1f + * 0x01 | | 6 1c | + * 0x02 | | 3 1c | 3 1d + * 0x03 2 1c | 2 1d | 2 1e | 2 1f + * 0x04 2 1c | 2 1d | 2 1e | 2 1f + * 0x05 | | 3 1c | 3 1d + * 0x06 2 1c | 2 1d | 2 1e | 2 1f + * 0x07 | | 6 1c | + * 0x11 2 1c | 2 1d | 2 1e | 2 1f + * 0x2a 2 | | 2 1e | 2 1f + * 0x34 6 1c | 6 1d | 4 1e | 4 1f + * 0x35 | | 3 1c | 3 1d + * 0x36 6 1c | 6 1d | 4 1e | 4 1f + * | | | + * Fman 2: | | | + * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4 + * EMI1 | EMI1 | EMI1 | EMI1 + * Mux Phy | Mux Phy | Mux Phy | Mux Phy + * Value Addr | Value Addr | Value Addr | Value Addr + * 0x00 | | 6 1c | 6 1d + * 0x01 | | | + * 0x02 | | 6 1c | 6 1d + * 0x03 3 1c | 3 1d | 6 1c | 6 1d + * 0x04 3 1c | 3 1d | 6 1c | 6 1d + * 0x05 | | 6 1c | 6 1d + * 0x06 | | 6 1c | 6 1d + * 0x07 | | | + * 0x11 | | | + * 0x2a | | | + * 0x34 | | | + * 0x35 | | | + * 0x36 | | | + */ + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct fsl_pq_mdio_info dtsec_mdio_info; + struct tgec_mdio_info tgec_mdio_info; + unsigned int i, slot; + int lane; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int srds_prtcl = (in_be32(&gur->rcwsr[4]) & + FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; + + printf("Initializing Fman\n"); + + initialize_lane_to_slot(); + + /* We want to use the PIXIS to configure MUX routing, not GPIOs. */ + setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL); + + memset(mdio_mux, 0, sizeof(mdio_mux)); + + dtsec_mdio_info.regs = + (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fsl_pq_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the real 10G MDIO bus */ + fm_tgec_mdio_init(bis, &tgec_mdio_info); + + /* Register the three virtual MDIO front-ends */ + super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, + "SUPER_HYDRA_RGMII_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, + "SUPER_HYDRA_FM1_SGMII_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, + "SUPER_HYDRA_FM2_SGMII_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, + "SUPER_HYDRA_FM1_TGEC_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, + "SUPER_HYDRA_FM2_TGEC_MDIO"); + + /* + * Program the DTSEC PHY addresses assuming that they are all SGMII. + * For any DTSEC that's RGMII, we'll override its PHY address later. + * We assume that DTSEC5 is only used for RGMII. + */ + fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR); + +#if (CONFIG_SYS_NUM_FMAN == 2) + fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR); +#endif + + switch (srds_prtcl) { + case 0: + case 3: + case 4: + case 6: + case 0x11: + case 0x2a: + case 0x34: + case 0x36: + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, + CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + break; + case 1: + case 2: + case 5: + case 7: + case 0x35: + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, + CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); + break; + default: + printf("Fman: Unsupport SerDes Protocol 0x%02x\n", srds_prtcl); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot[lane]; + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + switch (slot) { + case 1: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 | + BRDCFG1_EMI1_EN; + break; + case 2: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 | + BRDCFG1_EMI1_EN; + break; + case 3: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 | + BRDCFG1_EMI1_EN; + break; + case 5: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 | + BRDCFG1_EMI1_EN; + break; + case 6: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 | + BRDCFG1_EMI1_EN; + break; + case 7: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 | + BRDCFG1_EMI1_EN; + break; + }; + + super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_SGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_RGMII: + /* + * FM1 DTSEC5 is routed via EC1 to the first on-board + * RGMII port. FM2 DTSEC5 is routed via EC2 to the + * second on-board RGMII port. The other DTSECs cannot + * be routed to RGMII. + */ + debug("FM1@DTSEC%u is RGMII at address %u\n", + idx + 1, 0); + fm_info_set_phy_address(i, 0); + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII | + BRDCFG1_EMI1_EN; + super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + } + + /* + * For 10G, we only support one XAUI card per Fman. If present, then we + * force its routing and never touch those bits again, which removes the + * need for Linux to do any muxing. This works because of the way + * BRDCFG1 is defined, but it's a bit hackish. + * + * The PHY address for the XAUI card depends on which slot it's in. The + * macros we use imply that the PHY address is based on which FM, but + * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5, + * and FM2 could only use a XAUI in slot 4. On the Hydra board, we + * check the actual slot and just use the macros as-is, even though + * the P3041 and P5020 only have one Fman. + */ + lane = serdes_get_first_lane(XAUI_FM1); + if (lane >= 0) { + debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); + mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2; + super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + } + + fm_info_set_mdio(FM1_10GEC1, + miiphy_get_dev_by_name("SUPER_HYDRA_FM1_TGEC_MDIO")); + +#if (CONFIG_SYS_NUM_FMAN == 2) + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + int idx = i - FM2_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot[lane]; + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + debug("FM2@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + switch (slot) { + case 1: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 | + BRDCFG1_EMI1_EN; + break; + case 2: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 | + BRDCFG1_EMI1_EN; + break; + case 3: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 | + BRDCFG1_EMI1_EN; + break; + case 5: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 | + BRDCFG1_EMI1_EN; + break; + case 6: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 | + BRDCFG1_EMI1_EN; + break; + case 7: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 | + BRDCFG1_EMI1_EN; + break; + }; + + super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_SGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_RGMII: + /* + * FM1 DTSEC5 is routed via EC1 to the first on-board + * RGMII port. FM2 DTSEC5 is routed via EC2 to the + * second on-board RGMII port. The other DTSECs cannot + * be routed to RGMII. + */ + debug("FM2@DTSEC%u is RGMII at address %u\n", + idx + 1, 1); + fm_info_set_phy_address(i, 1); + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII | + BRDCFG1_EMI1_EN; + super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman2: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + } + + /* + * For 10G, we only support one XAUI card per Fman. If present, then we + * force its routing and never touch those bits again, which removes the + * need for Linux to do any muxing. This works because of the way + * BRDCFG1 is defined, but it's a bit hackish. + * + * The PHY address for the XAUI card depends on which slot it's in. The + * macros we use imply that the PHY address is based on which FM, but + * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5, + * and FM2 could only use a XAUI in slot 4. On the Hydra board, we + * check the actual slot and just use the macros as-is, even though + * the P3041 and P5020 only have one Fman. + */ + lane = serdes_get_first_lane(XAUI_FM2); + if (lane >= 0) { + debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); + mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1; + super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + } + + fm_info_set_mdio(FM2_10GEC1, + miiphy_get_dev_by_name("SUPER_HYDRA_FM2_TGEC_MDIO")); + +#endif + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/corenet_ds/p5040ds_ddr.c b/board/freescale/corenet_ds/p5040ds_ddr.c new file mode 100644 index 0000000..e65de36 --- /dev/null +++ b/board/freescale/corenet_ds/p5040ds_ddr.c @@ -0,0 +1,18 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include +#include + +fixed_ddr_parm_t fixed_ddr_parm_0[] = { + {0, 0, NULL} +}; + +fixed_ddr_parm_t fixed_ddr_parm_1[] = { + {0, 0, NULL} +}; diff --git a/boards.cfg b/boards.cfg index 7ae663c..1f49b48 100644 --- a/boards.cfg +++ b/boards.cfg @@ -848,6 +848,7 @@ P5020DS_SDCARD powerpc mpc85xx corenet_ds freescale P5020DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SECURE_BOOT P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 P5020DS_SRIO_PCIE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 +P5040DS powerpc mpc85xx corenet_ds freescale BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,SPIFLASH stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index 7a1fcdd..7fbb50a 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o COBJS-$(CONFIG_PPC_P3041) += p5020.o COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o +COBJS-$(CONFIG_PPC_P5040) += p5040.o COBJS-$(CONFIG_PPC_T4240) += t4240.o COBJS-$(CONFIG_PPC_B4860) += b4860.o endif diff --git a/drivers/net/fm/p5040.c b/drivers/net/fm/p5040.c new file mode 100644 index 0000000..bc6b4ba --- /dev/null +++ b/drivers/net/fm/p5040.c @@ -0,0 +1,113 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5, + [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1, + [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1, + [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2, + [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3, + [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4, + [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5, + [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2, +}; + +static int is_device_disabled(enum fm_port port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* don't allow disabling of DTSEC1 as its needed for MDIO */ + if (port == FM1_DTSEC1) + return; + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr11 = in_be32(&gur->rcwsr[11]); + + if (is_device_disabled(port)) + return PHY_INTERFACE_MODE_NONE; + + if ((port == FM1_10GEC1) && (is_serdes_configured(XAUI_FM1))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM2_10GEC1) && (is_serdes_configured(XAUI_FM2))) + return PHY_INTERFACE_MODE_XGMII; + + /* handle RGMII first */ + if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) == + FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) == + FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII)) + return PHY_INTERFACE_MODE_MII; + + if ((port == FM2_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == + FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM2_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == + FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII)) + return PHY_INTERFACE_MODE_MII; + + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + case FM2_DTSEC1: + case FM2_DTSEC2: + case FM2_DTSEC3: + case FM2_DTSEC4: + case FM2_DTSEC5: + if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h new file mode 100644 index 0000000..50d9e541 --- /dev/null +++ b/include/configs/P5040DS.h @@ -0,0 +1,40 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P5040 DS board configuration file + * + */ +#define CONFIG_P5040DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P5040 + +#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ + +#define CONFIG_MMC +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_PCIE3 +#define CONFIG_SYS_FSL_RAID_ENGINE + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "corenet_ds.h" -- 2.7.4