From d0367098dc1e925d22a6706e358636d12371116c Mon Sep 17 00:00:00 2001 From: Kathiravan T Date: Mon, 20 Mar 2023 16:15:30 +0530 Subject: [PATCH] arm64: dts: qcom: ipq5332: add few device nodes Add the nodes for QUP peripheral, PRNG and WDOG. While at it, enable the I2C device for MI01.2 board. Signed-off-by: Kathiravan T Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230320104530.30411-3-quic_kathirav@quicinc.com --- arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 14 ++++++ arch/arm64/boot/dts/qcom/ipq5332.dtsi | 67 +++++++++++++++++++++++++++++ 2 files changed, 81 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts index 702013b..3af1d55 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts @@ -28,6 +28,13 @@ status = "okay"; }; +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &sdhc { bus-width = <4>; max-frequency = <192000000>; @@ -50,6 +57,13 @@ /* PINCTRL */ &tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + sdc_default_state: sdc-default-state { clk-pins { pins = "gpio13"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 04ef80f..12e0e17 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -134,6 +134,13 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5332-tlmm"; reg = <0x01000000 0x300000>; @@ -191,6 +198,16 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + blsp1_uart0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -201,6 +218,48 @@ status = "disabled"; }; + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ @@ -233,6 +292,14 @@ }; }; + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = ; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + apcs_glb: mailbox@b111000 { compatible = "qcom,ipq5332-apcs-apps-global", "qcom,ipq6018-apcs-apps-global"; -- 2.7.4