From ced07371d931884c9c89b66bfe951ea0148a8d08 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 2 Nov 2008 10:59:04 -0300 Subject: [PATCH] V4L/DVB (9512): cx18: Fix write retries for registers that always change - part 3. cx18: Fix write retries for registers that always change - part 3. Fix the io for the rest of the registers that will often not read back the value just written. Modified register readback checks to make sure the intended effect was achieved without constantly rewriting the registers. The one outstanding register remaining is 0xc72014 CX18_AUDIO_ENABLE, whose behavior on writes I have yet to determine. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-av-audio.c | 41 +++++++++---- drivers/media/video/cx18/cx18-av-core.c | 95 +++++++++++++++++++++-------- drivers/media/video/cx18/cx18-av-core.h | 3 + drivers/media/video/cx18/cx18-av-firmware.c | 18 +++--- drivers/media/video/cx18/cx18-firmware.c | 60 ++++++++++++------ drivers/media/video/cx18/cx18-gpio.c | 24 +++++--- drivers/media/video/cx18/cx18-i2c.c | 24 +++++--- 7 files changed, 185 insertions(+), 80 deletions(-) diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c index 0b55837..486cad0 100644 --- a/drivers/media/video/cx18/cx18-av-audio.c +++ b/drivers/media/video/cx18/cx18-av-audio.c @@ -215,12 +215,15 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq) void cx18_av_audio_set_path(struct cx18 *cx) { struct cx18_av_state *state = &cx->av_state; + u8 v; /* stop microcontroller */ - cx18_av_and_or(cx, 0x803, ~0x10, 0); + v = cx18_av_read(cx, 0x803) & ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); /* assert soft reset */ - cx18_av_and_or(cx, 0x810, ~0x1, 0x01); + v = cx18_av_read(cx, 0x810) | 0x01; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); /* Mute everything to prevent the PFFT! */ cx18_av_write(cx, 0x8d3, 0x1f); @@ -240,12 +243,14 @@ void cx18_av_audio_set_path(struct cx18 *cx) set_audclk_freq(cx, state->audclk_freq); /* deassert soft reset */ - cx18_av_and_or(cx, 0x810, ~0x1, 0x00); + v = cx18_av_read(cx, 0x810) & ~0x01; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { /* When the microcontroller detects the * audio format, it will unmute the lines */ - cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + v = cx18_av_read(cx, 0x803) | 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); } } @@ -347,19 +352,23 @@ static int get_mute(struct cx18 *cx) static void set_mute(struct cx18 *cx, int mute) { struct cx18_av_state *state = &cx->av_state; + u8 v; if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { /* Must turn off microcontroller in order to mute sound. * Not sure if this is the best method, but it does work. * If the microcontroller is running, then it will undo any * changes to the mute register. */ + v = cx18_av_read(cx, 0x803); if (mute) { /* disable microcontroller */ - cx18_av_and_or(cx, 0x803, ~0x10, 0x00); + v &= ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); cx18_av_write(cx, 0x8d3, 0x1f); } else { /* enable microcontroller */ - cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + v |= 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); } } else { /* SRC1_MUTE_EN */ @@ -375,16 +384,26 @@ int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg) switch (cmd) { case VIDIOC_INT_AUDIO_CLOCK_FREQ: + { + u8 v; if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { - cx18_av_and_or(cx, 0x803, ~0x10, 0); + v = cx18_av_read(cx, 0x803) & ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); cx18_av_write(cx, 0x8d3, 0x1f); } - cx18_av_and_or(cx, 0x810, ~0x1, 1); + v = cx18_av_read(cx, 0x810) | 0x1; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); + retval = set_audclk_freq(cx, *(u32 *)arg); - cx18_av_and_or(cx, 0x810, ~0x1, 0); - if (state->aud_input > CX18_AV_AUDIO_SERIAL2) - cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + + v = cx18_av_read(cx, 0x810) & ~0x1; + cx18_av_write_expect(cx, 0x810, v, v, 0x0f); + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { + v = cx18_av_read(cx, 0x803) | 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + } return retval; + } case VIDIOC_G_CTRL: switch (ctrl->id) { diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 73f5141..5c079e3 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -36,12 +36,31 @@ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value) return 0; } +int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask) +{ + u32 reg = 0xc40000 + (addr & ~3); + int shift = (addr & 3) * 8; + u32 x = cx18_read_reg(cx, reg); + + x = (x & ~((u32)0xff << shift)) | ((u32)value << shift); + cx18_write_reg_expect(cx, x, reg, + ((u32)eval << shift), ((u32)mask << shift)); + return 0; +} + int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value) { cx18_write_reg(cx, value, 0xc40000 + addr); return 0; } +int +cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, u32 mask) +{ + cx18_write_reg_expect(cx, value, 0xc40000 + addr, eval, mask); + return 0; +} + int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value) { cx18_write_reg_noretry(cx, value, 0xc40000 + addr); @@ -98,14 +117,16 @@ static void cx18_av_initialize(struct cx18 *cx) cx18_av_loadfw(cx); /* Stop 8051 code execution */ - cx18_av_write4(cx, CXADEC_DL_CTL, 0x03000000); + cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x03000000, + 0x03000000, 0x13000000); /* initallize the PLL by toggling sleep bit */ v = cx18_av_read4(cx, CXADEC_HOST_REG1); - /* enable sleep mode */ - cx18_av_write4(cx, CXADEC_HOST_REG1, v | 1); + /* enable sleep mode - register appears to be read only... */ + cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v | 1, v, 0xfffe); /* disable sleep mode */ - cx18_av_write4(cx, CXADEC_HOST_REG1, v & 0xfffe); + cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v & 0xfffe, + v & 0xfffe, 0xffff); /* initialize DLLs */ v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF; @@ -125,9 +146,10 @@ static void cx18_av_initialize(struct cx18 *cx) v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1; /* enable TUNE_FIL_RST */ - cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL3, v); + cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, v, v, 0x03009F0F); /* disable TUNE_FIL_RST */ - cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL3, v & 0xFFFFFFFE); + cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, + v & 0xFFFFFFFE, v & 0xFFFFFFFE, 0x03009F0F); /* enable 656 output */ cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00); @@ -324,6 +346,7 @@ static void input_change(struct cx18 *cx) { struct cx18_av_state *state = &cx->av_state; v4l2_std_id std = state->std; + u8 v; /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */ cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); @@ -333,31 +356,34 @@ static void input_change(struct cx18 *cx) if (std & V4L2_STD_525_60) { if (std == V4L2_STD_NTSC_M_JP) { /* Japan uses EIAJ audio standard */ - cx18_av_write(cx, 0x808, 0xf7); - cx18_av_write(cx, 0x80b, 0x02); + cx18_av_write_expect(cx, 0x808, 0xf7, 0xf7, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x02, 0x02, 0x3f); } else if (std == V4L2_STD_NTSC_M_KR) { /* South Korea uses A2 audio standard */ - cx18_av_write(cx, 0x808, 0xf8); - cx18_av_write(cx, 0x80b, 0x03); + cx18_av_write_expect(cx, 0x808, 0xf8, 0xf8, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); } else { /* Others use the BTSC audio standard */ - cx18_av_write(cx, 0x808, 0xf6); - cx18_av_write(cx, 0x80b, 0x01); + cx18_av_write_expect(cx, 0x808, 0xf6, 0xf6, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x01, 0x01, 0x3f); } } else if (std & V4L2_STD_PAL) { /* Follow tuner change procedure for PAL */ - cx18_av_write(cx, 0x808, 0xff); - cx18_av_write(cx, 0x80b, 0x03); + cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); } else if (std & V4L2_STD_SECAM) { /* Select autodetect for SECAM */ - cx18_av_write(cx, 0x808, 0xff); - cx18_av_write(cx, 0x80b, 0x03); + cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff); + cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); } - if (cx18_av_read(cx, 0x803) & 0x10) { + v = cx18_av_read(cx, 0x803); + if (v & 0x10) { /* restart audio decoder microcontroller */ - cx18_av_and_or(cx, 0x803, ~0x10, 0x00); - cx18_av_and_or(cx, 0x803, ~0x10, 0x10); + v &= ~0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); + v |= 0x10; + cx18_av_write_expect(cx, 0x803, v, v, 0x1f); } } @@ -368,6 +394,7 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, u8 is_composite = (vid_input >= CX18_AV_COMPOSITE1 && vid_input <= CX18_AV_COMPOSITE8); u8 reg; + u8 v; CX18_DEBUG_INFO("decoder set video input %d, audio input %d\n", vid_input, aud_input); @@ -413,16 +440,23 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, return -EINVAL; } - cx18_av_write(cx, 0x103, reg); + cx18_av_write_expect(cx, 0x103, reg, reg, 0xf7); /* Set INPUT_MODE to Composite (0) or S-Video (1) */ cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02); + /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ - cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); + v = cx18_av_read(cx, 0x102); + if (reg & 0x80) + v &= ~0x2; + else + v |= 0x2; /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) - cx18_av_and_or(cx, 0x102, ~0x4, 4); + v |= 0x4; else - cx18_av_and_or(cx, 0x102, ~0x4, 0); + v &= ~0x4; + cx18_av_write_expect(cx, 0x102, v, v, 0x17); + /*cx18_av_and_or4(cx, 0x104, ~0x001b4180, 0x00004180);*/ state->vid_input = vid_input; @@ -799,40 +833,47 @@ int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg) } case VIDIOC_S_TUNER: + { + u8 v; + if (state->radio) break; + v = cx18_av_read(cx, 0x809); + v &= ~0xf; + switch (vt->audmode) { case V4L2_TUNER_MODE_MONO: /* mono -> mono stereo -> mono bilingual -> lang1 */ - cx18_av_and_or(cx, 0x809, ~0xf, 0x00); break; case V4L2_TUNER_MODE_STEREO: case V4L2_TUNER_MODE_LANG1: /* mono -> mono stereo -> stereo bilingual -> lang1 */ - cx18_av_and_or(cx, 0x809, ~0xf, 0x04); + v |= 0x4; break; case V4L2_TUNER_MODE_LANG1_LANG2: /* mono -> mono stereo -> stereo bilingual -> lang1/lang2 */ - cx18_av_and_or(cx, 0x809, ~0xf, 0x07); + v |= 0x7; break; case V4L2_TUNER_MODE_LANG2: /* mono -> mono stereo -> stereo bilingual -> lang2 */ - cx18_av_and_or(cx, 0x809, ~0xf, 0x01); + v |= 0x1; break; default: return -EINVAL; } + cx18_av_write_expect(cx, 0x809, v, v, 0xff); state->audmode = vt->audmode; break; + } case VIDIOC_G_FMT: return get_v4lfmt(cx, (struct v4l2_format *)arg); diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index b67d8df..a07988c 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -302,6 +302,9 @@ struct cx18_av_state { int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value); int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask); +int cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, + u32 mask); u8 cx18_av_read(struct cx18 *cx, u16 addr); u32 cx18_av_read4(struct cx18 *cx, u16 addr); u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr); diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c index 522a035..caa748a 100644 --- a/drivers/media/video/cx18/cx18-av-firmware.c +++ b/drivers/media/video/cx18/cx18-av-firmware.c @@ -43,11 +43,13 @@ int cx18_av_loadfw(struct cx18 *cx) /* The firmware load often has byte errors, so allow for several retries, both at byte level and at the firmware load level. */ while (retries1 < 5) { - cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000); - cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6); + cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000, + 0x00008430, 0xffffffff); /* cx25843 */ + cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff); - /* Reset the Mako core (Register is undocumented.) */ - cx18_av_write4(cx, 0x8100, 0x00010000); + /* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */ + cx18_av_write4_expect(cx, 0x8100, 0x00010000, + 0x00008430, 0xffffffff); /* cx25843 */ /* Put the 8051 in reset and enable firmware upload */ cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000); @@ -93,7 +95,8 @@ int cx18_av_loadfw(struct cx18 *cx) return -EIO; } - cx18_av_write4(cx, CXADEC_DL_CTL, 0x13000000 | fw->size); + cx18_av_write4_expect(cx, CXADEC_DL_CTL, + 0x13000000 | fw->size, 0x13000000, 0x13000000); /* Output to the 416 */ cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000); @@ -118,7 +121,8 @@ int cx18_av_loadfw(struct cx18 *cx) passthrough */ cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5000B687); - cx18_av_write4(cx, CXADEC_STD_DET_CTL, 0x000000F6); + cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6, + 0x3F00FFFF); /* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */ /* Set bit 0 in register 0x9CC to signify that this is MiniMe. */ @@ -136,7 +140,7 @@ int cx18_av_loadfw(struct cx18 *cx) v |= 0xFF; /* Auto by default */ v |= 0x400; /* Stereo by default */ v |= 0x14000000; - cx18_av_write4(cx, CXADEC_STD_DET_CTL, v); + cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF); release_firmware(fw); diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c index 5153442..7a7c890 100644 --- a/drivers/media/video/cx18/cx18-firmware.c +++ b/drivers/media/video/cx18/cx18-firmware.c @@ -200,8 +200,10 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx) void cx18_halt_firmware(struct cx18 *cx) { CX18_DEBUG_INFO("Preparing for firmware halt.\n"); - cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ - cx18_write_reg(cx, 0x00020002, CX18_ADEC_CONTROL); + cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET, + 0x0000000F, 0x000F000F); + cx18_write_reg_expect(cx, 0x00020002, CX18_ADEC_CONTROL, + 0x00000002, 0x00020002); } void cx18_init_power(struct cx18 *cx, int lowpwr) @@ -211,7 +213,8 @@ void cx18_init_power(struct cx18 *cx, int lowpwr) cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN); /* ADEC out of sleep */ - cx18_write_reg(cx, 0x00020000, CX18_ADEC_CONTROL); + cx18_write_reg_expect(cx, 0x00020000, CX18_ADEC_CONTROL, + 0x00000000, 0x00020002); /* The fast clock is at 200/245 MHz */ cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT); @@ -248,22 +251,34 @@ void cx18_init_power(struct cx18 *cx, int lowpwr) /* VFC = disabled */ /* USB = disabled */ - cx18_write_reg(cx, lowpwr ? 0xFFFF0020 : 0x00060004, - CX18_CLOCK_SELECT1); - cx18_write_reg(cx, lowpwr ? 0xFFFF0004 : 0x00060006, - CX18_CLOCK_SELECT2); - - cx18_write_reg(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1); - cx18_write_reg(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2); + if (lowpwr) { + cx18_write_reg_expect(cx, 0xFFFF0020, CX18_CLOCK_SELECT1, + 0x00000020, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF0004, CX18_CLOCK_SELECT2, + 0x00000004, 0xFFFFFFFF); + } else { + /* This doesn't explicitly set every clock select */ + cx18_write_reg_expect(cx, 0x00060004, CX18_CLOCK_SELECT1, + 0x00000004, 0x00060006); + cx18_write_reg_expect(cx, 0x00060006, CX18_CLOCK_SELECT2, + 0x00000006, 0x00060006); + } - cx18_write_reg(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1); - cx18_write_reg(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2); + cx18_write_reg_expect(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1, + 0x00000002, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2, + 0x00000104, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1, + 0x00009026, 0xFFFFFFFF); + cx18_write_reg_expect(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2, + 0x00003105, 0xFFFFFFFF); } void cx18_init_memory(struct cx18 *cx) { cx18_msleep_timeout(10, 0); - cx18_write_reg(cx, 0x10000, CX18_DDR_SOFT_RESET); + cx18_write_reg_expect(cx, 0x00010000, CX18_DDR_SOFT_RESET, + 0x00000000, 0x00010001); cx18_msleep_timeout(10, 0); cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG); @@ -282,13 +297,15 @@ void cx18_init_memory(struct cx18 *cx) cx18_msleep_timeout(10, 0); - cx18_write_reg(cx, 0x20000, CX18_DDR_SOFT_RESET); + cx18_write_reg_expect(cx, 0x00020000, CX18_DDR_SOFT_RESET, + 0x00000000, 0x00020002); cx18_msleep_timeout(10, 0); /* use power-down mode when idle */ cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG); - cx18_write_reg(cx, 0x10001, CX18_REG_BUS_TIMEOUT_EN); + cx18_write_reg_expect(cx, 0x00010001, CX18_REG_BUS_TIMEOUT_EN, + 0x00000001, 0x00010001); cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7); cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR); @@ -310,7 +327,9 @@ int cx18_firmware_init(struct cx18 *cx) /* Allow chip to control CLKRUN */ cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK); - cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ + /* Stop the firmware */ + cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET, + 0x0000000F, 0x000F000F); cx18_msleep_timeout(1, 0); @@ -325,7 +344,8 @@ int cx18_firmware_init(struct cx18 *cx) cx18_write_enc(cx, 0xE51FF004, 0); cx18_write_enc(cx, 0xa00000, 4); /* todo: not hardcoded */ /* Start APU */ - cx18_write_reg(cx, 0x00010000, CX18_PROC_SOFT_RESET); + cx18_write_reg_expect(cx, 0x00010000, CX18_PROC_SOFT_RESET, + 0x00000000, 0x00010001); cx18_msleep_timeout(500, 0); sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw", @@ -335,7 +355,9 @@ int cx18_firmware_init(struct cx18 *cx) int retries = 0; /* start the CPU */ - cx18_write_reg(cx, 0x00080000, CX18_PROC_SOFT_RESET); + cx18_write_reg_expect(cx, + 0x00080000, CX18_PROC_SOFT_RESET, + 0x00000000, 0x00080008); while (retries++ < 50) { /* Loop for max 500mS */ if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 1) == 0) @@ -352,6 +374,6 @@ int cx18_firmware_init(struct cx18 *cx) return -EIO; } /* initialize GPIO */ - cx18_write_reg(cx, 0x14001400, 0xC78110); + cx18_write_reg_expect(cx, 0x14001400, 0xc78110, 0x00001400, 0x14001400); return 0; } diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 0e56042..17b7a32 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -47,15 +47,21 @@ static void gpio_write(struct cx18 *cx) { - u32 dir = cx->gpio_dir; - u32 val = cx->gpio_val; - - cx18_write_reg(cx, (dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); - cx18_write_reg(cx, ((dir & 0xffff) << 16) | (val & 0xffff), - CX18_REG_GPIO_OUT1); - cx18_write_reg(cx, dir & 0xffff0000, CX18_REG_GPIO_DIR2); - cx18_write_reg_sync(cx, (dir & 0xffff0000) | ((val & 0xffff0000) >> 16), - CX18_REG_GPIO_OUT2); + u32 dir_lo = cx->gpio_dir & 0xffff; + u32 val_lo = cx->gpio_val & 0xffff; + u32 dir_hi = cx->gpio_dir >> 16; + u32 val_hi = cx->gpio_val >> 16; + + cx18_write_reg_expect(cx, dir_lo << 16, + CX18_REG_GPIO_DIR1, ~dir_lo, dir_lo); + cx18_write_reg_expect(cx, (dir_lo << 16) | val_lo, + CX18_REG_GPIO_OUT1, val_lo, dir_lo); + cx18_write_reg_expect(cx, dir_hi << 16, + CX18_REG_GPIO_DIR2, ~dir_hi, dir_hi); + cx18_write_reg_expect(cx, (dir_hi << 16) | val_hi, + CX18_REG_GPIO_OUT2, val_hi, dir_hi); + if (!cx18_retry_mmio) + (void) cx18_read_reg(cx, CX18_REG_GPIO_OUT2); /* sync */ } void cx18_reset_i2c_slaves_gpio(struct cx18 *cx) diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index aa09e55..824efbe 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -27,6 +27,7 @@ #include "cx18-gpio.h" #include "cx18-av-core.h" #include "cx18-i2c.h" +#include "cx18-irq.h" #define CX18_REG_I2C_1_WR 0xf15000 #define CX18_REG_I2C_1_RD 0xf15008 @@ -396,22 +397,31 @@ int init_cx18_i2c(struct cx18 *cx) if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) { /* Reset/Unreset I2C hardware block */ /* Clock select 220MHz */ - cx18_write_reg(cx, 0x10000000, 0xc71004); + cx18_write_reg_expect(cx, 0x10000000, 0xc71004, + 0x00000000, 0x10001000); /* Clock Enable */ - cx18_write_reg_sync(cx, 0x10001000, 0xc71024); + cx18_write_reg_expect(cx, 0x10001000, 0xc71024, + 0x00001000, 0x10001000); } /* courtesy of Steven Toth */ - cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c); + cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0); + if (!cx18_retry_mmio) + (void) cx18_read_reg(cx, 0xc7001c); /* sync */ mdelay(10); - cx18_write_reg_sync(cx, 0x00c000c0, 0xc7001c); + cx18_write_reg_expect(cx, 0x00c000c0, 0xc7001c, 0x000000c0, 0x00c000c0); + if (!cx18_retry_mmio) + (void) cx18_read_reg(cx, 0xc7001c); /* sync */ mdelay(10); - cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c); + cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0); + if (!cx18_retry_mmio) + (void) cx18_read_reg(cx, 0xc7001c); /* sync */ mdelay(10); /* Set to edge-triggered intrs. */ - cx18_write_reg_sync(cx, 0x00c00000, 0xc730c8); + cx18_write_reg(cx, 0x00c00000, 0xc730c8); /* Clear any stale intrs */ - cx18_write_reg_sync(cx, 0x00c00000, 0xc730c4); + cx18_write_reg_expect(cx, HW2_I2C1_INT|HW2_I2C2_INT, HW2_INT_CLR_STATUS, + ~(HW2_I2C1_INT|HW2_I2C2_INT), HW2_I2C1_INT|HW2_I2C2_INT); /* Hw I2C1 Clock Freq ~100kHz */ cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR); -- 2.7.4