From ce43a2168c59bc47b5f0c1825fd5f9a2a9e3b447 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 20 Feb 2013 04:06:32 +0000 Subject: [PATCH] e1000e: cleanup USLEEP_RANGE checkpatch checks Resolve strict checkpatch USLEEP_RANGE checks by converting delays and sleeps as described in ./Documentation/timers/timers-howto.txt. Three other violations of the text have also been fixed. CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/80003es2lan.c | 12 ++++++------ drivers/net/ethernet/intel/e1000e/82571.c | 12 ++++++------ drivers/net/ethernet/intel/e1000e/e1000.h | 2 +- drivers/net/ethernet/intel/e1000e/ethtool.c | 10 +++++----- drivers/net/ethernet/intel/e1000e/ich8lan.c | 16 ++++++++-------- drivers/net/ethernet/intel/e1000e/mac.c | 10 +++++----- drivers/net/ethernet/intel/e1000e/nvm.c | 2 +- drivers/net/ethernet/intel/e1000e/phy.c | 12 ++++++------ 8 files changed, 38 insertions(+), 38 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 30cf42c..b71c850 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -395,7 +395,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, * before the device has completed the "Page Select" MDI * transaction. So we wait 200us after each MDI command... */ - udelay(200); + usleep_range(200, 400); /* ...and verify the command was successful. */ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp); @@ -405,13 +405,13 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, return -E1000_ERR_PHY; } - udelay(200); + usleep_range(200, 400); ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - udelay(200); + usleep_range(200, 400); } else { ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, @@ -464,7 +464,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, * before the device has completed the "Page Select" MDI * transaction. So we wait 200us after each MDI command... */ - udelay(200); + usleep_range(200, 400); /* ...and verify the command was successful. */ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp); @@ -474,13 +474,13 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, return -E1000_ERR_PHY; } - udelay(200); + usleep_range(200, 400); ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - udelay(200); + usleep_range(200, 400); } else { ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index c0477fb..7380442 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -437,7 +437,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) return ret_val; phy->id = (u32)(phy_id << 16); - udelay(20); + usleep_range(20, 40); ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; @@ -482,7 +482,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) if (!(swsm & E1000_SWSM_SMBI)) break; - udelay(50); + usleep_range(50, 100); i++; } @@ -499,7 +499,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) if (er32(SWSM) & E1000_SWSM_SWESMBI) break; - udelay(50); + usleep_range(50, 100); } if (i == fw_timeout) { @@ -1022,7 +1022,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) } if (hw->nvm.type == e1000_nvm_flash_hw) { - udelay(10); + usleep_range(10, 20); ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; ew32(CTRL_EXT, ctrl_ext); @@ -1529,7 +1529,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) status = er32(STATUS); er32(RXCW); /* SYNCH bit and IV bit are sticky */ - udelay(10); + usleep_range(10, 20); rxcw = er32(RXCW); if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { @@ -1632,7 +1632,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) * the IV bit and restart Autoneg */ for (i = 0; i < AN_RETRY_COUNT; i++) { - udelay(10); + usleep_range(10, 20); rxcw = er32(RXCW); if ((rxcw & E1000_RXCW_SYNCH) && (rxcw & E1000_RXCW_C)) diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 6ba1149..e371f77 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -597,7 +597,7 @@ static inline s32 __ew32_prepare(struct e1000_hw *hw) s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT; while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i) - udelay(50); + usleep_range(50, 100); return i; } diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index e43c944..23d5d90 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1297,7 +1297,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) ew32(CTRL, ctrl_reg); e1e_flush(); - udelay(500); + usleep_range(500, 1000); return 0; } @@ -1323,7 +1323,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) e1e_wphy(hw, PHY_REG(2, 21), phy_reg); /* Assert SW reset for above settings to take effect */ hw->phy.ops.commit(hw); - mdelay(1); + usleep_range(1000, 2000); /* Force Full Duplex */ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C); @@ -1364,7 +1364,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* force 1000, set loopback */ e1e_wphy(hw, MII_BMCR, 0x4140); - mdelay(250); + msleep(250); /* Now set up the MAC to the same speed/duplex as the PHY. */ ctrl_reg = er32(CTRL); @@ -1396,7 +1396,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) if (hw->phy.type == e1000_phy_m88) e1000_phy_disable_receiver(adapter); - udelay(500); + usleep_range(500, 1000); return 0; } @@ -1704,7 +1704,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) /* On some Phy/switch combinations, link establishment * can take a few seconds more than expected. */ - msleep(5000); + msleep_interruptible(5000); if (!(er32(STATUS) & E1000_STATUS_LU)) *data = 1; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 0ed04fc..382813d 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -312,7 +312,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; ew32(CTRL, mac_reg); e1e_flush(); - udelay(10); + usleep_range(10, 20); mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; ew32(CTRL, mac_reg); e1e_flush(); @@ -1517,7 +1517,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) if (ret_val) return ret_val; - udelay(20); + usleep_range(20, 40); ctrl_ext = er32(CTRL_EXT); ctrl_reg = er32(CTRL); @@ -1527,11 +1527,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); e1e_flush(); - udelay(20); + usleep_range(20, 40); ew32(CTRL, ctrl_reg); ew32(CTRL_EXT, ctrl_ext); e1e_flush(); - udelay(20); + usleep_range(20, 40); return 0; } @@ -2037,7 +2037,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) do { data = er32(STATUS); data &= E1000_STATUS_LAN_INIT_DONE; - udelay(100); + usleep_range(100, 200); } while ((!data) && --loop); /* If basic configuration is incomplete before the above loop @@ -2801,7 +2801,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) /* Convert offset to bytes. */ act_offset = (i + new_bank_offset) << 1; - udelay(100); + usleep_range(100, 200); /* Write the bytes to the new bank. */ ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, @@ -2809,7 +2809,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) break; - udelay(100); + usleep_range(100, 200); ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset + 1, (u8)(data >> 8)); @@ -3077,7 +3077,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, for (program_retries = 0; program_retries < 100; program_retries++) { e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset); - udelay(100); + usleep_range(100, 200); ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); if (!ret_val) break; diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index b78e021..b25cc43 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -596,7 +596,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) * serdes media type. */ /* SYNCH bit and IV bit are sticky. */ - udelay(10); + usleep_range(10, 20); rxcw = er32(RXCW); if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { @@ -613,7 +613,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) status = er32(STATUS); if (status & E1000_STATUS_LU) { /* SYNCH bit and IV bit are sticky, so reread rxcw. */ - udelay(10); + usleep_range(10, 20); rxcw = er32(RXCW); if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { @@ -1382,7 +1382,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) if (!(swsm & E1000_SWSM_SMBI)) break; - udelay(50); + usleep_range(50, 100); i++; } @@ -1400,7 +1400,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) if (er32(SWSM) & E1000_SWSM_SWESMBI) break; - udelay(50); + usleep_range(50, 100); } if (i == timeout) { @@ -1712,7 +1712,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw) while (timeout) { if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) break; - udelay(100); + usleep_range(100, 200); timeout--; } diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index 84fecc2..44ddc0a 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -630,7 +630,7 @@ void e1000e_reload_nvm_generic(struct e1000_hw *hw) { u32 ctrl_ext; - udelay(10); + usleep_range(10, 20); ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; ew32(CTRL_EXT, ctrl_ext); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 9b3d167..60dbf02 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -97,7 +97,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) return ret_val; phy->id = (u32)(phy_id << 16); - udelay(20); + usleep_range(20, 40); ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; @@ -165,7 +165,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) * the lower time out */ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - udelay(50); + usleep_range(50, 100); mdic = er32(MDIC); if (mdic & E1000_MDIC_READY) break; @@ -184,7 +184,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) * reading duplicate data in the next MDIC transaction. */ if (hw->mac.type == e1000_pch2lan) - udelay(100); + usleep_range(100, 200); return 0; } @@ -223,7 +223,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) * the lower time out */ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - udelay(50); + usleep_range(50, 100); mdic = er32(MDIC); if (mdic & E1000_MDIC_READY) break; @@ -241,7 +241,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) * reading duplicate data in the next MDIC transaction. */ if (hw->mac.type == e1000_pch2lan) - udelay(100); + usleep_range(100, 200); return 0; } @@ -2120,7 +2120,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) ew32(CTRL, ctrl); e1e_flush(); - udelay(150); + usleep_range(150, 300); phy->ops.release(hw); -- 2.7.4