From cdf0b86b250fd3c1c3e120c86583ea510c52e4ce Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Mon, 18 Jul 2022 16:21:20 +0800 Subject: [PATCH] r8152: fix a WOL issue This fixes that the platform is waked by an unexpected packet. The size and range of FIFO is different when the device enters S3 state, so it is necessary to correct some settings when suspending. Regardless of jumbo frame, set RMS to 1522 and MTPS to MTPS_DEFAULT. Besides, enable MCU_BORW_EN to update the method of calculating the pointer of data. Then, the hardware could get the correct data. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang Link: https://lore.kernel.org/r/20220718082120.10957-391-nic_swsd@realtek.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/r8152.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index b082819..0f6efaa 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -32,7 +32,7 @@ #define NETNEXT_VERSION "12" /* Information for net */ -#define NET_VERSION "12" +#define NET_VERSION "13" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -5917,7 +5917,8 @@ static void r8153_enter_oob(struct r8152 *tp) wait_oob_link_list_ready(tp); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, 1522); + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_DEFAULT); switch (tp->version) { case RTL_VER_03: @@ -5953,6 +5954,10 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data |= MCU_BORW_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + rxdy_gated_en(tp, false); ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); @@ -6555,6 +6560,9 @@ static void rtl8156_down(struct r8152 *tp) rtl_disable(tp); rtl_reset_bmu(tp); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, 1522); + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_DEFAULT); + /* Clear teredo wake event. bit[15:8] is the teredo wakeup * type. Set it to zero. bits[7:0] are the W1C bits about * the events. Set them to all 1 to clear them. @@ -6565,6 +6573,10 @@ static void rtl8156_down(struct r8152 *tp) ocp_data |= NOW_IS_OOB; ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data |= MCU_BORW_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + rtl_rx_vlan_en(tp, true); rxdy_gated_en(tp, false); -- 2.7.4