From ccf68e59e93181df9353c0cc721459d18ff200b6 Mon Sep 17 00:00:00 2001 From: sonic zhang Date: Wed, 9 Dec 2009 12:31:28 -0800 Subject: [PATCH] serial: fit blackfin uart over sport driver into common uart infrastructure Fit blackfin uart over sport driver into common uart inftrastructure. It is based on the early platform interfaces to get the platform data early when the console is initilized. 1. Enable sport uart driver to change uart baud, data bit, stop bit at runtime. Bind the index of uart device nodes to physical index of sports. 2. Move all platform data into arch specific board files. Register and probe platform device data in both early and normal stages. 3. Console is registered in sport uart driver as well. 4. Remove 500 us block waiting in sport tx stop code by putting a dummy data into tx fifo to make sure the sport tx stops when all bytes are shifted out except for the dummy data. 5. clean up a bit and fix up coding style. Signed-off-by: Sonic Zhang Cc: Alan Cox Cc: Mike Frysinger Cc: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/Kconfig | 52 ++- drivers/serial/bfin_sport_uart.c | 701 ++++++++++++++++++++++++++------------- drivers/serial/bfin_sport_uart.h | 38 +-- 3 files changed, 511 insertions(+), 280 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 888a0ce..cb935b1 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1418,38 +1418,34 @@ config SERIAL_BFIN_SPORT To compile this driver as a module, choose M here: the module will be called bfin_sport_uart. -choice - prompt "Baud rate for Blackfin SPORT UART" - depends on SERIAL_BFIN_SPORT - default SERIAL_SPORT_BAUD_RATE_57600 - help - Choose a baud rate for the SPORT UART, other uart settings are - 8 bit, 1 stop bit, no parity, no flow control. - -config SERIAL_SPORT_BAUD_RATE_115200 - bool "115200" - -config SERIAL_SPORT_BAUD_RATE_57600 - bool "57600" +config SERIAL_BFIN_SPORT_CONSOLE + bool "Console on Blackfin sport emulated uart" + depends on SERIAL_BFIN_SPORT=y + select SERIAL_CORE_CONSOLE -config SERIAL_SPORT_BAUD_RATE_38400 - bool "38400" +config SERIAL_BFIN_SPORT0_UART + bool "Enable UART over SPORT0" + depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M) + help + Enable UART over SPORT0 -config SERIAL_SPORT_BAUD_RATE_19200 - bool "19200" +config SERIAL_BFIN_SPORT1_UART + bool "Enable UART over SPORT1" + depends on SERIAL_BFIN_SPORT + help + Enable UART over SPORT1 -config SERIAL_SPORT_BAUD_RATE_9600 - bool "9600" -endchoice +config SERIAL_BFIN_SPORT2_UART + bool "Enable UART over SPORT2" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT2 -config SPORT_BAUD_RATE - int - depends on SERIAL_BFIN_SPORT - default 115200 if (SERIAL_SPORT_BAUD_RATE_115200) - default 57600 if (SERIAL_SPORT_BAUD_RATE_57600) - default 38400 if (SERIAL_SPORT_BAUD_RATE_38400) - default 19200 if (SERIAL_SPORT_BAUD_RATE_19200) - default 9600 if (SERIAL_SPORT_BAUD_RATE_9600) +config SERIAL_BFIN_SPORT3_UART + bool "Enable UART over SPORT3" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT3 config SERIAL_TIMBERDALE tristate "Support for timberdale UART" diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 088bb35..7c72888 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -1,27 +1,11 @@ /* - * File: linux/drivers/serial/bfin_sport_uart.c + * Blackfin On-Chip Sport Emulated UART Driver * - * Based on: drivers/serial/bfin_5xx.c by Aubrey Li. - * Author: Roy Huang + * Copyright 2006-2009 Analog Devices Inc. * - * Created: Nov 22, 2006 - * Copyright: (c) 2006-2007 Analog Devices Inc. - * Description: this driver enable SPORTs on Blackfin emulate UART. + * Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ /* @@ -29,39 +13,18 @@ * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. */ -/* After reset, there is a prelude of low level pulse when transmit data first - * time. No addtional pulse in following transmit. - * According to document: - * The SPORTs are ready to start transmitting or receiving data no later than - * three serial clock cycles after they are enabled in the SPORTx_TCR1 or - * SPORTx_RCR1 register. No serial clock cycles are lost from this point on. - * The first internal frame sync will occur one frame sync delay after the - * SPORTs are ready. External frame syncs can occur as soon as the SPORT is - * ready. - */ +/* #define DEBUG */ -/* Thanks to Axel Alatalo for fixing sport rx bug. Sometimes - * sport receives data incorrectly. The following is Axel's words. - * As EE-191, sport rx samples 3 times of the UART baudrate and takes the - * middle smaple of every 3 samples as the data bit. For a 8-N-1 UART setting, - * 30 samples will be required for a byte. If transmitter sends a 1/3 bit short - * byte due to buadrate drift, then the 30th sample of a byte, this sample is - * also the third sample of the stop bit, will happens on the immediately - * following start bit which will be thrown away and missed. Thus since parts - * of the startbit will be missed and the receiver will begin to drift, the - * effect accumulates over time until synchronization is lost. - * If only require 2 samples of the stopbit (by sampling in total 29 samples), - * then a to short byte as in the case above will be tolerated. Then the 1/3 - * early startbit will trigger a framesync since the last read is complete - * after only 2/3 stopbit and framesync is active during the last 1/3 looking - * for a possible early startbit. */ - -//#define DEBUG +#define DRV_NAME "bfin-sport-uart" +#define DEVICE_NAME "ttySS" +#define pr_fmt(fmt) DRV_NAME ": " fmt #include #include +#include #include #include #include @@ -75,23 +38,36 @@ #include "bfin_sport_uart.h" +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART unsigned short bfin_uart_pin_req_sport0[] = {P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0}; - +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART unsigned short bfin_uart_pin_req_sport1[] = {P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0}; - -#define DRV_NAME "bfin-sport-uart" +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +unsigned short bfin_uart_pin_req_sport2[] = + {P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, \ + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +unsigned short bfin_uart_pin_req_sport3[] = + {P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, \ + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0}; +#endif struct sport_uart_port { struct uart_port port; - char *name; - - int tx_irq; - int rx_irq; int err_irq; + unsigned short csize; + unsigned short rxmask; + unsigned short txmask1; + unsigned short txmask2; + unsigned char stopb; +/* unsigned char parib; */ }; static void sport_uart_tx_chars(struct sport_uart_port *up); @@ -99,36 +75,42 @@ static void sport_stop_tx(struct uart_port *port); static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) { - pr_debug("%s value:%x\n", __func__, value); - /* Place a Start and Stop bit */ + pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, + up->txmask1, up->txmask2); + + /* Place Start and Stop bits */ __asm__ __volatile__ ( - "R2 = b#01111111100;" - "R3 = b#10000000001;" - "%0 <<= 2;" - "%0 = %0 & R2;" - "%0 = %0 | R3;" - : "=d"(value) - : "d"(value) - : "ASTAT", "R2", "R3" + "%[val] <<= 1;" + "%[val] = %[val] & %[mask1];" + "%[val] = %[val] | %[mask2];" + : [val]"+d"(value) + : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) + : "ASTAT" ); pr_debug("%s value:%x\n", __func__, value); SPORT_PUT_TX(up, value); } -static inline unsigned int rx_one_byte(struct sport_uart_port *up) +static inline unsigned char rx_one_byte(struct sport_uart_port *up) { - unsigned int value, extract; + unsigned int value; + unsigned char extract; u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; - value = SPORT_GET_RX32(up); - pr_debug("%s value:%x\n", __func__, value); + if ((up->csize + up->stopb) > 7) + value = SPORT_GET_RX32(up); + else + value = SPORT_GET_RX(up); + + pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, + up->csize, up->rxmask); - /* Extract 8 bits data */ + /* Extract data */ __asm__ __volatile__ ( "%[extr] = 0;" - "%[mask1] = 0x1801(Z);" - "%[mask2] = 0x0300(Z);" + "%[mask1] = %[rxmask];" + "%[mask2] = 0x0200(Z);" "%[shift] = 0;" "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" ".Lloop_s:" @@ -138,9 +120,9 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up) "%[mask1] = %[mask1] - %[mask2];" ".Lloop_e:" "%[shift] += 1;" - : [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp), - [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2) - : "d"(value), [lc]"a"(8) + : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), + [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) + : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) : "ASTAT", "LB0", "LC0", "LT0" ); @@ -148,29 +130,28 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up) return extract; } -static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate) +static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) { - int tclkdiv, tfsdiv, rclkdiv; + int tclkdiv, rclkdiv; + unsigned int sclk = get_sclk(); - /* Set TCR1 and TCR2 */ - SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); - SPORT_PUT_TCR2(up, 10); + /* Set TCR1 and TCR2, TFSR is not enabled for uart */ + SPORT_PUT_TCR1(up, (ITFS | TLSBIT | ITCLK)); + SPORT_PUT_TCR2(up, size + 1); pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); /* Set RCR1 and RCR2 */ SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); - SPORT_PUT_RCR2(up, 28); + SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); - tclkdiv = sclk/(2 * baud_rate) - 1; - tfsdiv = 12; - rclkdiv = sclk/(2 * baud_rate * 3) - 1; + tclkdiv = sclk / (2 * baud_rate) - 1; + rclkdiv = sclk / (2 * baud_rate * 2) - 1; SPORT_PUT_TCLKDIV(up, tclkdiv); - SPORT_PUT_TFSDIV(up, tfsdiv); SPORT_PUT_RCLKDIV(up, rclkdiv); SSYNC(); - pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n", - __func__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv); + pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", + __func__, sclk, baud_rate, tclkdiv, rclkdiv); return 0; } @@ -181,23 +162,29 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) struct tty_struct *tty = up->port.state->port.tty; unsigned int ch; - do { + spin_lock(&up->port.lock); + + while (SPORT_GET_STAT(up) & RXNE) { ch = rx_one_byte(up); up->port.icount.rx++; - if (uart_handle_sysrq_char(&up->port, ch)) - ; - else + if (!uart_handle_sysrq_char(&up->port, ch)) tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (SPORT_GET_STAT(up) & RXNE); + } tty_flip_buffer_push(tty); + spin_unlock(&up->port.lock); + return IRQ_HANDLED; } static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) { - sport_uart_tx_chars(dev_id); + struct sport_uart_port *up = dev_id; + + spin_lock(&up->port.lock); + sport_uart_tx_chars(up); + spin_unlock(&up->port.lock); return IRQ_HANDLED; } @@ -208,6 +195,8 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) struct tty_struct *tty = up->port.state->port.tty; unsigned int stat = SPORT_GET_STAT(up); + spin_lock(&up->port.lock); + /* Overflow in RX FIFO */ if (stat & ROVF) { up->port.icount.overrun++; @@ -216,15 +205,16 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) } /* These should not happen */ if (stat & (TOVF | TUVF | RUVF)) { - printk(KERN_ERR "SPORT Error:%s %s %s\n", - (stat & TOVF)?"TX overflow":"", - (stat & TUVF)?"TX underflow":"", - (stat & RUVF)?"RX underflow":""); + pr_err("SPORT Error:%s %s %s\n", + (stat & TOVF) ? "TX overflow" : "", + (stat & TUVF) ? "TX underflow" : "", + (stat & RUVF) ? "RX underflow" : ""); SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); } SSYNC(); + spin_unlock(&up->port.lock); return IRQ_HANDLED; } @@ -232,60 +222,37 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) static int sport_startup(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - char buffer[20]; - int retval; + int ret; pr_debug("%s enter\n", __func__); - snprintf(buffer, 20, "%s rx", up->name); - retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); - return retval; + ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, + "SPORT_UART_RX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT RX interrupt\n"); + return ret; } - snprintf(buffer, 20, "%s tx", up->name); - retval = request_irq(up->tx_irq, sport_uart_tx_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); + ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, + "SPORT_UART_TX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT TX interrupt\n"); goto fail1; } - snprintf(buffer, 20, "%s err", up->name); - retval = request_irq(up->err_irq, sport_uart_err_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); + ret = request_irq(up->err_irq, sport_uart_err_irq, 0, + "SPORT_UART_STATUS", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT status interrupt\n"); goto fail2; } - if (port->line) { - if (peripheral_request_list(bfin_uart_pin_req_sport1, DRV_NAME)) - goto fail3; - } else { - if (peripheral_request_list(bfin_uart_pin_req_sport0, DRV_NAME)) - goto fail3; - } - - sport_uart_setup(up, get_sclk(), port->uartclk); - - /* Enable receive interrupt */ - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) | RSPEN)); - SSYNC(); - return 0; + fail2: + free_irq(up->port.irq+1, up); + fail1: + free_irq(up->port.irq, up); - -fail3: - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); - - free_irq(up->err_irq, up); -fail2: - free_irq(up->tx_irq, up); -fail1: - free_irq(up->rx_irq, up); - - return retval; - + return ret; } static void sport_uart_tx_chars(struct sport_uart_port *up) @@ -344,20 +311,17 @@ static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) static void sport_stop_tx(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned int stat; pr_debug("%s enter\n", __func__); - stat = SPORT_GET_STAT(up); - while(!(stat & TXHRE)) { - udelay(1); - stat = SPORT_GET_STAT(up); - } /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. If baud rate is lower than default, - * delay should be longer. For example, if the baud rate is 9600, - * the delay must be at least 2ms by experience */ - udelay(500); + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); SSYNC(); @@ -370,6 +334,7 @@ static void sport_start_tx(struct uart_port *port) struct sport_uart_port *up = (struct sport_uart_port *)port; pr_debug("%s enter\n", __func__); + /* Write data into SPORT FIFO before enable SPROT to transmit */ sport_uart_tx_chars(up); @@ -403,37 +368,24 @@ static void sport_shutdown(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __func__); + dev_dbg(port->dev, "%s enter\n", __func__); /* Disable sport */ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); SSYNC(); - if (port->line) { - peripheral_free_list(bfin_uart_pin_req_sport1); - } else { - peripheral_free_list(bfin_uart_pin_req_sport0); - } - - free_irq(up->rx_irq, up); - free_irq(up->tx_irq, up); + free_irq(up->port.irq, up); + free_irq(up->port.irq+1, up); free_irq(up->err_irq, up); } -static void sport_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); - uart_update_timeout(port, CS8 ,port->uartclk); -} - static const char *sport_type(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; pr_debug("%s enter\n", __func__); - return up->name; + return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; } static void sport_release_port(struct uart_port *port) @@ -461,6 +413,110 @@ static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) return 0; } +static void sport_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + unsigned long flags; + int i; + + pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); + + switch (termios->c_cflag & CSIZE) { + case CS8: + up->csize = 8; + break; + case CS7: + up->csize = 7; + break; + case CS6: + up->csize = 6; + break; + case CS5: + up->csize = 5; + break; + default: + pr_warning("requested word length not supported\n"); + } + + if (termios->c_cflag & CSTOPB) { + up->stopb = 1; + } + if (termios->c_cflag & PARENB) { + pr_warning("PAREN bits is not supported yet\n"); + /* up->parib = 1; */ + } + + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } + + /* RX extract mask */ + up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); + /* TX masks, 8 bit data and 1 bit stop for example: + * mask1 = b#0111111110 + * mask2 = b#1000000000 + */ + for (i = 0, up->txmask1 = 0; i < up->csize; i++) + up->txmask1 |= (1<txmask2 = (1<stopb) { + ++i; + up->txmask2 |= (1<txmask1 <<= 1; + up->txmask2 <<= 1; + /* uart baud rate */ + port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); + + spin_lock_irqsave(&up->port.lock, flags); + + /* Disable UART */ + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); + + sport_uart_setup(up, up->csize + up->stopb, port->uartclk); + + /* driver TX line high after config, one dummy data is + * necessary to stop sport after shift one byte + */ + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SSYNC(); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, port->uartclk); + + /* Enable sport rx */ + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); + SSYNC(); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + struct uart_ops sport_uart_ops = { .tx_empty = sport_tx_empty, .set_mctrl = sport_set_mctrl, @@ -480,138 +536,319 @@ struct uart_ops sport_uart_ops = { .verify_port = sport_verify_port, }; -static struct sport_uart_port sport_uart_ports[] = { - { /* SPORT 0 */ - .name = "SPORT0", - .tx_irq = IRQ_SPORT0_TX, - .rx_irq = IRQ_SPORT0_RX, - .err_irq= IRQ_SPORT0_ERROR, - .port = { - .type = PORT_BFIN_SPORT, - .iotype = UPIO_MEM, - .membase = (void __iomem *)SPORT0_TCR1, - .mapbase = SPORT0_TCR1, - .irq = IRQ_SPORT0_RX, - .uartclk = CONFIG_SPORT_BAUD_RATE, - .fifosize = 8, - .ops = &sport_uart_ops, - .line = 0, - }, - }, { /* SPORT 1 */ - .name = "SPORT1", - .tx_irq = IRQ_SPORT1_TX, - .rx_irq = IRQ_SPORT1_RX, - .err_irq= IRQ_SPORT1_ERROR, - .port = { - .type = PORT_BFIN_SPORT, - .iotype = UPIO_MEM, - .membase = (void __iomem *)SPORT1_TCR1, - .mapbase = SPORT1_TCR1, - .irq = IRQ_SPORT1_RX, - .uartclk = CONFIG_SPORT_BAUD_RATE, - .fifosize = 8, - .ops = &sport_uart_ops, - .line = 1, - }, +#define BFIN_SPORT_UART_MAX_PORTS 4 + +static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static int __init +sport_uart_console_setup(struct console *co, char *options) +{ + struct sport_uart_port *up; + int baud = 57600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* Check whether an invalid uart number has been specified */ + if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) + return -ENODEV; + + up = bfin_sport_uart_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static void sport_uart_console_putchar(struct uart_port *port, int ch) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + while (SPORT_GET_STAT(up) & TXF) + barrier(); + + tx_one_byte(up, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sport_uart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + if (SPORT_GET_TCR1(up) & TSPEN) + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + else { + /* dummy data to start sport */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + /* Enable transmit, then an interrupt will generated */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + + /* Although the hold register is empty, last byte is still in shift + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + barrier(); + + /* Stop sport tx transfer */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SSYNC(); } + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sport_uart_reg; + +static struct console sport_uart_console = { + .name = DEVICE_NAME, + .write = sport_uart_console_write, + .device = uart_console_device, + .setup = sport_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sport_uart_reg, }; +#define SPORT_UART_CONSOLE (&sport_uart_console) +#else +#define SPORT_UART_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ + + static struct uart_driver sport_uart_reg = { .owner = THIS_MODULE, - .driver_name = "SPORT-UART", - .dev_name = "ttySS", + .driver_name = DRV_NAME, + .dev_name = DEVICE_NAME, .major = 204, .minor = 84, - .nr = ARRAY_SIZE(sport_uart_ports), - .cons = NULL, + .nr = BFIN_SPORT_UART_MAX_PORTS, + .cons = SPORT_UART_CONSOLE, }; -static int sport_uart_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM +static int sport_uart_suspend(struct device *dev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = dev_get_drvdata(dev); - pr_debug("%s enter\n", __func__); + dev_dbg(dev, "%s enter\n", __func__); if (sport) uart_suspend_port(&sport_uart_reg, &sport->port); return 0; } -static int sport_uart_resume(struct platform_device *dev) +static int sport_uart_resume(struct device *dev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = dev_get_drvdata(dev); - pr_debug("%s enter\n", __func__); + dev_dbg(dev, "%s enter\n", __func__); if (sport) uart_resume_port(&sport_uart_reg, &sport->port); return 0; } -static int sport_uart_probe(struct platform_device *dev) +static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { + .suspend = sport_uart_suspend, + .resume = sport_uart_resume, +}; +#endif + +static int __devinit sport_uart_probe(struct platform_device *pdev) { - pr_debug("%s enter\n", __func__); - sport_uart_ports[dev->id].port.dev = &dev->dev; - uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port); - platform_set_drvdata(dev, &sport_uart_ports[dev->id]); + struct resource *res; + struct sport_uart_port *sport; + int ret = 0; - return 0; + dev_dbg(&pdev->dev, "%s enter\n", __func__); + + if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { + dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_sport_uart_ports[pdev->id] == NULL) { + bfin_sport_uart_ports[pdev->id] = + kmalloc(sizeof(struct sport_uart_port), GFP_KERNEL); + sport = bfin_sport_uart_ports[pdev->id]; + if (!sport) { + dev_err(&pdev->dev, + "Fail to kmalloc sport_uart_port\n"); + return -ENOMEM; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, + "Fail to request SPORT peripherals\n"); + goto out_error_free_mem; + } + + spin_lock_init(&sport->port.lock); + sport->port.fifosize = SPORT_TX_FIFO_SIZE, + sport->port.ops = &sport_uart_ops; + sport->port.line = pdev->id; + sport->port.iotype = UPIO_MEM; + sport->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + sport->port.membase = ioremap(res->start, + res->end - res->start); + if (!sport->port.membase) { + dev_err(&pdev->dev, "Cannot map sport IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + + sport->port.irq = platform_get_irq(pdev, 0); + if (sport->port.irq < 0) { + dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + sport->err_irq = platform_get_irq(pdev, 1); + if (sport->err_irq < 0) { + dev_err(&pdev->dev, "No sport status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + } + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + sport = bfin_sport_uart_ports[pdev->id]; + sport->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, sport); + ret = uart_add_one_port(&sport_uart_reg, &sport->port); +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + } +#endif + if (!ret) + return 0; + + if (sport) { +out_error_unmap: + iounmap(sport->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } + + return ret; } -static int sport_uart_remove(struct platform_device *dev) +static int __devexit sport_uart_remove(struct platform_device *pdev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = platform_get_drvdata(pdev); - pr_debug("%s enter\n", __func__); - platform_set_drvdata(dev, NULL); + dev_dbg(&pdev->dev, "%s enter\n", __func__); + dev_set_drvdata(&pdev->dev, NULL); - if (sport) + if (sport) { uart_remove_one_port(&sport_uart_reg, &sport->port); + iounmap(sport->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } return 0; } static struct platform_driver sport_uart_driver = { .probe = sport_uart_probe, - .remove = sport_uart_remove, - .suspend = sport_uart_suspend, - .resume = sport_uart_resume, + .remove = __devexit_p(sport_uart_remove), .driver = { .name = DRV_NAME, +#ifdef CONFIG_PM + .pm = &bfin_sport_uart_dev_pm_ops, +#endif }, }; +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static __initdata struct early_platform_driver early_sport_uart_driver = { + .class_str = DRV_NAME, + .pdrv = &sport_uart_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init sport_uart_rs_console_init(void) +{ + early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); + + early_platform_driver_probe(DRV_NAME, BFIN_SPORT_UART_MAX_PORTS, 0); + + register_console(&sport_uart_console); + + return 0; +} +console_initcall(sport_uart_rs_console_init); +#endif + static int __init sport_uart_init(void) { int ret; - pr_debug("%s enter\n", __func__); + pr_info("Serial: Blackfin uart over sport driver\n"); + ret = uart_register_driver(&sport_uart_reg); - if (ret != 0) { - printk(KERN_ERR "Failed to register %s:%d\n", + if (ret) { + pr_err("failed to register %s:%d\n", sport_uart_reg.driver_name, ret); return ret; } ret = platform_driver_register(&sport_uart_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register sport uart driver:%d\n", ret); + if (ret) { + pr_err("failed to register sport uart driver:%d\n", ret); uart_unregister_driver(&sport_uart_reg); } - - pr_debug("%s exit\n", __func__); return ret; } +module_init(sport_uart_init); static void __exit sport_uart_exit(void) { - pr_debug("%s enter\n", __func__); platform_driver_unregister(&sport_uart_driver); uart_unregister_driver(&sport_uart_reg); } - -module_init(sport_uart_init); module_exit(sport_uart_exit); +MODULE_AUTHOR("Sonic Zhang, Roy Huang"); +MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h index 671d41c..abe0361 100644 --- a/drivers/serial/bfin_sport_uart.h +++ b/drivers/serial/bfin_sport_uart.h @@ -1,29 +1,23 @@ /* - * File: linux/drivers/serial/bfin_sport_uart.h + * Blackfin On-Chip Sport Emulated UART Driver * - * Based on: include/asm-blackfin/mach-533/bfin_serial_5xx.h - * Author: Roy Huang analog.com> + * Copyright 2006-2008 Analog Devices Inc. * - * Created: Nov 22, 2006 - * Copyright: (C) Analog Device Inc. - * Description: this driver enable SPORTs on Blackfin emulate UART. + * Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +#ifndef _BFIN_SPORT_UART_H +#define _BFIN_SPORT_UART_H #define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ #define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ @@ -61,3 +55,7 @@ #define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) #define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) #define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) + +#define SPORT_TX_FIFO_SIZE 8 + +#endif /* _BFIN_SPORT_UART_H */ -- 2.7.4