From ccdf90878b8ba53ebd7236e2edf363ae30847a4c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 8 Jan 2022 11:37:19 -0800 Subject: [PATCH] hwmon: (lm90) Re-enable interrupts after alert clears [ Upstream commit bc341a1a98827925082e95db174734fc8bd68af6 ] If alert handling is broken, interrupts are disabled after an alert and re-enabled after the alert clears. However, if there is an interrupt handler, this does not apply if alerts were originally disabled and enabled when the driver was loaded. In that case, interrupts will stay disabled after an alert was handled though the alert handler even after the alert condition clears. Address the situation by always re-enabling interrupts after the alert condition clears if there is an interrupt handler. Fixes: 2abdc357c55d9 ("hwmon: (lm90) Unmask hardware interrupt") Cc: Dmitry Osipenko Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin --- drivers/hwmon/lm90.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 12a8af3..09efdc4 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -848,7 +848,7 @@ static int lm90_update_device(struct device *dev) * Re-enable ALERT# output if it was originally enabled and * relevant alarms are all clear */ - if (!(data->config_orig & 0x80) && + if ((client->irq || !(data->config_orig & 0x80)) && !(data->alarms & data->alert_alarms)) { if (data->config & 0x80) { dev_dbg(&client->dev, "Re-enabling ALERT#\n"); -- 2.7.4