From ccb81601acc092711bfb75787bce467b7dbef4b2 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 4 Oct 2021 11:29:11 +0200 Subject: [PATCH] ARM: memmove: use frame pointer as unwind anchor The memmove routine is a bit unusual in the way it manages the stack pointer: depending on the execution path through the function, the SP assumes different values as different subsets of the register file are preserved and restored again. This is problematic when it comes to EHABI unwind info, as it is not instruction accurate, and does not allow tracking the SP value as it changes. Commit 207a6cb06990c ("ARM: 8224/1: Add unwinding support for memmove function") addressed this by carving up the function in different chunks as far as the unwinder is concerned, and keeping a set of unwind directives for each of them, each corresponding with the state of the stack pointer during execution of the chunk in question. This not only duplicates unwind info unnecessarily, but it also complicates unwinding the stack upon overflow. Instead, let's do what the compiler does when the SP is updated halfway through a function, which is to use a frame pointer and emit the appropriate unwind directives to communicate this to the unwinder. Note that Thumb-2 uses R7 for this, while ARM uses R11 aka FP. So let's avoid touching R7 in the body of the function, so that Thumb-2 can use it as the frame pointer. R11 was not modified in the first place. Signed-off-by: Ard Biesheuvel Tested-by: Keith Packard Tested-by: Marc Zyngier Tested-by: Vladimir Murzin # ARMv7M --- arch/arm/lib/memmove.S | 60 +++++++++++++++++--------------------------------- 1 file changed, 20 insertions(+), 40 deletions(-) diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 6fecc12..64105540 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -31,12 +31,13 @@ WEAK(memmove) subs ip, r0, r1 cmphi r2, ip bls __memcpy - - stmfd sp!, {r0, r4, lr} UNWIND( .fnend ) UNWIND( .fnstart ) - UNWIND( .save {r0, r4, lr} ) @ in first stmfd block + UNWIND( .save {r0, r4, fpreg, lr} ) + stmfd sp!, {r0, r4, UNWIND(fpreg,) lr} + UNWIND( .setfp fpreg, sp ) + UNWIND( mov fpreg, sp ) add r1, r1, r2 add r0, r0, r2 subs r2, r2, #4 @@ -48,12 +49,7 @@ WEAK(memmove) bne 10f 1: subs r2, r2, #(28) - stmfd sp!, {r5 - r8} - UNWIND( .fnend ) - - UNWIND( .fnstart ) - UNWIND( .save {r0, r4, lr} ) - UNWIND( .save {r5 - r8} ) @ in second stmfd block + stmfd sp!, {r5, r6, r8, r9} blt 5f CALGN( ands ip, r0, #31 ) @@ -72,9 +68,9 @@ WEAK(memmove) PLD( pld [r1, #-96] ) 3: PLD( pld [r1, #-128] ) -4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr} +4: ldmdb r1!, {r3, r4, r5, r6, r8, r9, ip, lr} subs r2, r2, #32 - stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr} + stmdb r0!, {r3, r4, r5, r6, r8, r9, ip, lr} bge 3b PLD( cmn r2, #96 ) PLD( bge 4b ) @@ -88,8 +84,8 @@ WEAK(memmove) W(ldr) r4, [r1, #-4]! W(ldr) r5, [r1, #-4]! W(ldr) r6, [r1, #-4]! - W(ldr) r7, [r1, #-4]! W(ldr) r8, [r1, #-4]! + W(ldr) r9, [r1, #-4]! W(ldr) lr, [r1, #-4]! add pc, pc, ip @@ -99,17 +95,13 @@ WEAK(memmove) W(str) r4, [r0, #-4]! W(str) r5, [r0, #-4]! W(str) r6, [r0, #-4]! - W(str) r7, [r0, #-4]! W(str) r8, [r0, #-4]! + W(str) r9, [r0, #-4]! W(str) lr, [r0, #-4]! CALGN( bcs 2b ) -7: ldmfd sp!, {r5 - r8} - UNWIND( .fnend ) @ end of second stmfd block - - UNWIND( .fnstart ) - UNWIND( .save {r0, r4, lr} ) @ still in first stmfd block +7: ldmfd sp!, {r5, r6, r8, r9} 8: movs r2, r2, lsl #31 ldrbne r3, [r1, #-1]! @@ -118,7 +110,7 @@ WEAK(memmove) strbne r3, [r0, #-1]! strbcs r4, [r0, #-1]! strbcs ip, [r0, #-1] - ldmfd sp!, {r0, r4, pc} + ldmfd sp!, {r0, r4, UNWIND(fpreg,) pc} 9: cmp ip, #2 ldrbgt r3, [r1, #-1]! @@ -137,13 +129,10 @@ WEAK(memmove) ldr r3, [r1, #0] beq 17f blt 18f - UNWIND( .fnend ) .macro backward_copy_shift push pull - UNWIND( .fnstart ) - UNWIND( .save {r0, r4, lr} ) @ still in first stmfd block subs r2, r2, #28 blt 14f @@ -152,12 +141,7 @@ WEAK(memmove) CALGN( subcc r2, r2, ip ) CALGN( bcc 15f ) -11: stmfd sp!, {r5 - r9} - UNWIND( .fnend ) - - UNWIND( .fnstart ) - UNWIND( .save {r0, r4, lr} ) - UNWIND( .save {r5 - r9} ) @ in new second stmfd block +11: stmfd sp!, {r5, r6, r8 - r10} PLD( pld [r1, #-4] ) PLD( subs r2, r2, #96 ) @@ -167,35 +151,31 @@ WEAK(memmove) PLD( pld [r1, #-96] ) 12: PLD( pld [r1, #-128] ) -13: ldmdb r1!, {r7, r8, r9, ip} +13: ldmdb r1!, {r8, r9, r10, ip} mov lr, r3, lspush #\push subs r2, r2, #32 ldmdb r1!, {r3, r4, r5, r6} orr lr, lr, ip, lspull #\pull mov ip, ip, lspush #\push - orr ip, ip, r9, lspull #\pull + orr ip, ip, r10, lspull #\pull + mov r10, r10, lspush #\push + orr r10, r10, r9, lspull #\pull mov r9, r9, lspush #\push orr r9, r9, r8, lspull #\pull mov r8, r8, lspush #\push - orr r8, r8, r7, lspull #\pull - mov r7, r7, lspush #\push - orr r7, r7, r6, lspull #\pull + orr r8, r8, r6, lspull #\pull mov r6, r6, lspush #\push orr r6, r6, r5, lspull #\pull mov r5, r5, lspush #\push orr r5, r5, r4, lspull #\pull mov r4, r4, lspush #\push orr r4, r4, r3, lspull #\pull - stmdb r0!, {r4 - r9, ip, lr} + stmdb r0!, {r4 - r6, r8 - r10, ip, lr} bge 12b PLD( cmn r2, #96 ) PLD( bge 13b ) - ldmfd sp!, {r5 - r9} - UNWIND( .fnend ) @ end of the second stmfd block - - UNWIND( .fnstart ) - UNWIND( .save {r0, r4, lr} ) @ still in first stmfd block + ldmfd sp!, {r5, r6, r8 - r10} 14: ands ip, r2, #28 beq 16f @@ -211,7 +191,6 @@ WEAK(memmove) 16: add r1, r1, #(\pull / 8) b 8b - UNWIND( .fnend ) .endm @@ -222,5 +201,6 @@ WEAK(memmove) 18: backward_copy_shift push=24 pull=8 + UNWIND( .fnend ) ENDPROC(memmove) ENDPROC(__memmove) -- 2.7.4