From cc30d60e4ca0b68e7e3f906eddd1e5b995d349f8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 4 Jan 2009 15:18:54 +0100 Subject: [PATCH] mmci: Add support for ST Micro derivate This patch adds support for the ST Microelectronics version of the PL180 PrimeCell. They use designer ID 0x80 and have a few alterations/bugfixes related to open drain and HW flow control. They also add some SDIO registers, I am unsure if these are in ST HW only or if this is things also added in later ARM revisions, but they are included in the mmci.h file for completeness. Signed-off-by: Linus Walleij Signed-off-by: Pierre Ossman --- drivers/mmc/host/mmci.c | 37 +++++++++++++++++++++++++++++++++---- drivers/mmc/host/mmci.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 1bcbdd6..2909bbc 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } + if (host->hw_designer == 0x80) + clk |= MCI_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; } @@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: break; case MMC_POWER_UP: - pwr |= MCI_PWR_UP; - break; + /* The ST version does not have this, fall through to POWER_ON */ + if (host->hw_designer != 0x80) { + pwr |= MCI_PWR_UP; + break; + } case MMC_POWER_ON: pwr |= MCI_PWR_ON; break; } - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - pwr |= MCI_ROD; + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { + if (host->hw_designer != 0x80) + pwr |= MCI_ROD; + else { + /* + * The ST Micro variant use the ROD bit for something + * else and only has OD (Open Drain). + */ + pwr |= MCI_OD; + } + } writel(clk, host->base + MMCICLOCK); @@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + /* Bits 12 thru 19 is the designer */ + host->hw_designer = (dev->periphid >> 12) & 0xff; + /* Bits 20 thru 23 is the revison */ + host->hw_revision = (dev->periphid >> 20) & 0xf; + DBG(host, "designer ID = 0x%02x\n", host->hw_designer); + DBG(host, "revision = 0x%01x\n", host->hw_revision); host->clk = clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); @@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = { .id = 0x00041181, .mask = 0x000fffff, }, + /* ST Micro variants */ + { + .id = 0x00180180, + .mask = 0x00ffffff, + }, + { + .id = 0x00280180, + .mask = 0x00ffffff, + }, { 0, 0 }, }; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 0f39c49..0441bac 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -11,13 +11,23 @@ #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 +#define MCI_DATA2DIREN (1 << 2) +#define MCI_CMDDIREN (1 << 3) +#define MCI_DATA0DIREN (1 << 4) +#define MCI_DATA31DIREN (1 << 5) #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) +/* The ST Micro version does not have ROD */ +#define MCI_FBCLKEN (1 << 7) +#define MCI_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) +#define MCI_WIDE_BUS (1 << 11) +/* HW flow control on the ST Micro version */ +#define MCI_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -26,6 +36,10 @@ #define MCI_CPSM_INTERRUPT (1 << 8) #define MCI_CPSM_PENDING (1 << 9) #define MCI_CPSM_ENABLE (1 << 10) +#define MCI_SDIO_SUSP (1 << 11) +#define MCI_ENCMD_COMPL (1 << 12) +#define MCI_NIEN (1 << 13) +#define MCI_CE_ATACMD (1 << 14) #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 @@ -39,6 +53,11 @@ #define MCI_DPSM_DIRECTION (1 << 1) #define MCI_DPSM_MODE (1 << 2) #define MCI_DPSM_DMAENABLE (1 << 3) +#define MCI_DPSM_BLOCKSIZE (1 << 4) +#define MCI_DPSM_RWSTART (1 << 8) +#define MCI_DPSM_RWSTOP (1 << 9) +#define MCI_DPSM_RWMOD (1 << 10) +#define MCI_DPSM_SDIOEN (1 << 11) #define MMCIDATACNT 0x030 #define MMCISTATUS 0x034 @@ -63,6 +82,8 @@ #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) +#define MCI_SDIOIT (1 << 22) +#define MCI_CEATAEND (1 << 23) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -75,6 +96,8 @@ #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) #define MCI_DATABLOCKENDCLR (1 << 10) +#define MCI_SDIOITC (1 << 22) +#define MCI_CEATAENDC (1 << 23) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) @@ -98,6 +121,8 @@ #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) +#define MCI_SDIOITMASK (1 << 22) +#define MCI_CEATAENDMASK (1 << 23) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 @@ -136,6 +161,9 @@ struct mmci_host { u32 pwr; struct mmc_platform_data *plat; + u8 hw_designer; + u8 hw_revision:4; + struct timer_list timer; unsigned int oldstat; -- 2.7.4