From cbefd6e1e05a2d55a97c053601dccf114d1eab02 Mon Sep 17 00:00:00 2001 From: HyungKyu Song Date: Thu, 14 Feb 2013 22:11:08 +0900 Subject: [PATCH] Tizen 2.0 Release --- AUTHORS | 25 + COPYING | 676 +++++++++++++++++++++++ ChangeLog | 146 +++++ INSTALL | 56 ++ Makefile.in | 113 ++++ NEWS | 12 + README | 152 ++++++ TODO | 15 + buffer.c | 622 +++++++++++++++++++++ carg_parser.c | 275 ++++++++++ carg_parser.h | 85 +++ configure | 220 ++++++++ doc/ed.1 | 1045 +++++++++++++++++++++++++++++++++++ doc/ed.info | 1417 ++++++++++++++++++++++++++++++++++++++++++++++++ doc/ed.texinfo | 982 +++++++++++++++++++++++++++++++++ doc/fdl.texinfo | 506 +++++++++++++++++ ed.h | 142 +++++ global.c | 88 +++ io.c | 312 +++++++++++ main.c | 199 +++++++ main_loop.c | 730 +++++++++++++++++++++++++ packaging/ed.changes | 165 ++++++ packaging/ed.spec | 59 ++ regex.c | 392 ++++++++++++++ signal.c | 259 +++++++++ testsuite/=.err.posix | 1 + testsuite/a.d | 5 + testsuite/a.r | 8 + testsuite/a.t | 9 + testsuite/a1.err.posix | 3 + testsuite/a2.err | 3 + testsuite/a2.pr | 3 + testsuite/addr.d | 9 + testsuite/addr.r | 2 + testsuite/addr.t | 5 + testsuite/addr1.err | 1 + testsuite/addr1.pr | 1 + testsuite/addr2.err | 1 + testsuite/addr2.pr | 1 + testsuite/ascii.d | Bin 0 -> 256 bytes testsuite/ascii.r | Bin 0 -> 256 bytes testsuite/ascii.t | 0 testsuite/bang1.d | 0 testsuite/bang1.err | 1 + testsuite/bang1.pr | 1 + testsuite/bang1.r | 1 + testsuite/bang1.t | 5 + testsuite/bang2.err | 1 + testsuite/bang2.pr | 1 + testsuite/c.d | 5 + testsuite/c.r | 4 + testsuite/c.t | 12 + testsuite/c1.err | 3 + testsuite/c1.pr | 3 + testsuite/check.sh | 104 ++++ testsuite/comment.d | 6 + testsuite/comment.r | 6 + testsuite/comment.t | 5 + testsuite/d.d | 5 + testsuite/d.err | 1 + testsuite/d.pr | 1 + testsuite/d.r | 1 + testsuite/d.t | 3 + testsuite/e1.d | 5 + testsuite/e1.err | 1 + testsuite/e1.pr | 1 + testsuite/e1.r | 4 + testsuite/e1.t | 2 + testsuite/e2.d | 1 + testsuite/e2.err | 1 + testsuite/e2.pr | 1 + testsuite/e2.r | 1 + testsuite/e2.t | 1 + testsuite/e3.d | 1 + testsuite/e3.err | 1 + testsuite/e3.pr | 1 + testsuite/e3.r | 1 + testsuite/e3.t | 1 + testsuite/e4.d | 1 + testsuite/e4.r | 1 + testsuite/e4.t | 1 + testsuite/f1.err | 1 + testsuite/f1.pr | 1 + testsuite/f2.err | 1 + testsuite/f2.pr | 1 + testsuite/g1.d | 5 + testsuite/g1.err | 1 + testsuite/g1.pr | 1 + testsuite/g1.r | 15 + testsuite/g1.t | 6 + testsuite/g2.d | 5 + testsuite/g2.err | 1 + testsuite/g2.pr | 1 + testsuite/g2.r | 1 + testsuite/g2.t | 2 + testsuite/g3.d | 5 + testsuite/g3.err | 1 + testsuite/g3.pr | 1 + testsuite/g3.r | 5 + testsuite/g3.t | 4 + testsuite/g4.d | 5 + testsuite/g4.r | 7 + testsuite/g4.t | 13 + testsuite/g5.d | 3 + testsuite/g5.r | 9 + testsuite/g5.t | 2 + testsuite/h.err | 1 + testsuite/h.pr | 1 + testsuite/i.d | 5 + testsuite/i.r | 8 + testsuite/i.t | 9 + testsuite/i1.err.posix | 3 + testsuite/i2.err | 3 + testsuite/i2.pr | 3 + testsuite/j.d | 5 + testsuite/j.r | 4 + testsuite/j.t | 2 + testsuite/k.d | 5 + testsuite/k.r | 5 + testsuite/k.t | 10 + testsuite/k1.err.posix | 1 + testsuite/k2.err | 1 + testsuite/k2.pr | 1 + testsuite/k3.err | 1 + testsuite/k3.pr | 1 + testsuite/k4.err | 6 + testsuite/k4.pr | 6 + testsuite/l.d | 0 testsuite/l.r | 0 testsuite/l.t | 0 testsuite/m.d | 5 + testsuite/m.err | 4 + testsuite/m.pr | 5 + testsuite/m.r | 5 + testsuite/m.t | 7 + testsuite/n.d | 0 testsuite/n.r | 0 testsuite/n.t | 0 testsuite/nl.err | 1 + testsuite/nl.pr | 1 + testsuite/nl1.d | 5 + testsuite/nl1.r | 8 + testsuite/nl1.t | 8 + testsuite/nl2.d | 5 + testsuite/nl2.r | 6 + testsuite/nl2.t | 4 + testsuite/p.d | 0 testsuite/p.r | 0 testsuite/p.t | 0 testsuite/q.d | 0 testsuite/q.r | 0 testsuite/q.t | 5 + testsuite/q1.err | 1 + testsuite/q1.pr | 1 + testsuite/r1.d | 5 + testsuite/r1.err.posix | 1 + testsuite/r1.r | 7 + testsuite/r1.t | 3 + testsuite/r2.d | 5 + testsuite/r2.err | 1 + testsuite/r2.pr | 1 + testsuite/r2.r | 10 + testsuite/r2.t | 1 + testsuite/r3.d | 5 + testsuite/r3.r | 4 + testsuite/r3.t | 2 + testsuite/s1.d | 5 + testsuite/s1.err | 1 + testsuite/s1.pr | 1 + testsuite/s1.r | 5 + testsuite/s1.t | 6 + testsuite/s10.err | 4 + testsuite/s10.pr | 5 + testsuite/s2.d | 5 + testsuite/s2.err | 4 + testsuite/s2.pr | 5 + testsuite/s2.r | 5 + testsuite/s2.t | 4 + testsuite/s3.d | 0 testsuite/s3.err | 1 + testsuite/s3.pr | 1 + testsuite/s3.r | 1 + testsuite/s3.t | 6 + testsuite/s4.err | 1 + testsuite/s4.pr | 1 + testsuite/s5.err | 1 + testsuite/s5.pr | 1 + testsuite/s6.err | 1 + testsuite/s6.pr | 1 + testsuite/s7.err | 5 + testsuite/s7.pr | 6 + testsuite/s8.err | 4 + testsuite/s8.pr | 5 + testsuite/s9.err | 4 + testsuite/s9.pr | 5 + testsuite/t.d | 5 + testsuite/t.r | 16 + testsuite/t1.d | 5 + testsuite/t1.err | 1 + testsuite/t1.pr | 1 + testsuite/t1.r | 16 + testsuite/t1.t | 3 + testsuite/t2.d | 5 + testsuite/t2.err | 1 + testsuite/t2.pr | 1 + testsuite/t2.r | 6 + testsuite/t2.t | 1 + testsuite/u.d | 5 + testsuite/u.err | 1 + testsuite/u.pr | 1 + testsuite/u.r | 9 + testsuite/u.t | 31 ++ testsuite/v.d | 5 + testsuite/v.r | 11 + testsuite/v.t | 6 + testsuite/w.d | 5 + testsuite/w.r | 10 + testsuite/w.t | 2 + testsuite/w1.err | 1 + testsuite/w1.pr | 1 + testsuite/w2.err | 1 + testsuite/w2.pr | 1 + testsuite/w3.err | 1 + testsuite/w3.pr | 1 + testsuite/x.d | 5 + testsuite/x.err | 10 + testsuite/x.pr | 1 + testsuite/x.r | 19 + testsuite/x.t | 8 + testsuite/z.err | 2 + testsuite/z.pr | 2 + 231 files changed, 9528 insertions(+) create mode 100644 AUTHORS create mode 100644 COPYING create mode 100644 ChangeLog create mode 100644 INSTALL create mode 100644 Makefile.in create mode 100644 NEWS create mode 100644 README create mode 100644 TODO create mode 100644 buffer.c create mode 100644 carg_parser.c create mode 100644 carg_parser.h create mode 100755 configure create mode 100644 doc/ed.1 create mode 100644 doc/ed.info create mode 100644 doc/ed.texinfo create mode 100644 doc/fdl.texinfo create mode 100644 ed.h create mode 100644 global.c create mode 100644 io.c create mode 100644 main.c create mode 100644 main_loop.c create mode 100644 packaging/ed.changes create mode 100644 packaging/ed.spec create mode 100644 regex.c create mode 100644 signal.c create mode 100644 testsuite/=.err.posix create mode 100644 testsuite/a.d create mode 100644 testsuite/a.r create mode 100644 testsuite/a.t create mode 100644 testsuite/a1.err.posix create mode 100644 testsuite/a2.err create mode 100644 testsuite/a2.pr create mode 100644 testsuite/addr.d create mode 100644 testsuite/addr.r create mode 100644 testsuite/addr.t create mode 100644 testsuite/addr1.err create mode 100644 testsuite/addr1.pr create mode 100644 testsuite/addr2.err create mode 100644 testsuite/addr2.pr create mode 100644 testsuite/ascii.d create mode 100644 testsuite/ascii.r create mode 100644 testsuite/ascii.t create mode 100644 testsuite/bang1.d create mode 100644 testsuite/bang1.err create mode 100644 testsuite/bang1.pr create mode 100644 testsuite/bang1.r create mode 100644 testsuite/bang1.t create mode 100644 testsuite/bang2.err create mode 100644 testsuite/bang2.pr create mode 100644 testsuite/c.d create mode 100644 testsuite/c.r create mode 100644 testsuite/c.t create mode 100644 testsuite/c1.err create mode 100644 testsuite/c1.pr create mode 100755 testsuite/check.sh create mode 100644 testsuite/comment.d create mode 100644 testsuite/comment.r create mode 100644 testsuite/comment.t create mode 100644 testsuite/d.d create mode 100644 testsuite/d.err create mode 100644 testsuite/d.pr create mode 100644 testsuite/d.r create mode 100644 testsuite/d.t create mode 100644 testsuite/e1.d create mode 100644 testsuite/e1.err create mode 100644 testsuite/e1.pr create mode 100644 testsuite/e1.r create mode 100644 testsuite/e1.t create mode 100644 testsuite/e2.d create mode 100644 testsuite/e2.err create mode 100644 testsuite/e2.pr create mode 100644 testsuite/e2.r create mode 100644 testsuite/e2.t create mode 100644 testsuite/e3.d create mode 100644 testsuite/e3.err create mode 100644 testsuite/e3.pr create mode 100644 testsuite/e3.r create mode 100644 testsuite/e3.t create mode 100644 testsuite/e4.d create mode 100644 testsuite/e4.r create mode 100644 testsuite/e4.t create mode 100644 testsuite/f1.err create mode 100644 testsuite/f1.pr create mode 100644 testsuite/f2.err create mode 100644 testsuite/f2.pr create mode 100644 testsuite/g1.d create mode 100644 testsuite/g1.err create mode 100644 testsuite/g1.pr create mode 100644 testsuite/g1.r create mode 100644 testsuite/g1.t create mode 100644 testsuite/g2.d create mode 100644 testsuite/g2.err create mode 100644 testsuite/g2.pr create mode 100644 testsuite/g2.r create mode 100644 testsuite/g2.t create mode 100644 testsuite/g3.d create mode 100644 testsuite/g3.err create mode 100644 testsuite/g3.pr create mode 100644 testsuite/g3.r create mode 100644 testsuite/g3.t create mode 100644 testsuite/g4.d create mode 100644 testsuite/g4.r create mode 100644 testsuite/g4.t create mode 100644 testsuite/g5.d create mode 100644 testsuite/g5.r create mode 100644 testsuite/g5.t create mode 100644 testsuite/h.err create mode 100644 testsuite/h.pr create mode 100644 testsuite/i.d create mode 100644 testsuite/i.r create mode 100644 testsuite/i.t create mode 100644 testsuite/i1.err.posix create mode 100644 testsuite/i2.err create mode 100644 testsuite/i2.pr create mode 100644 testsuite/j.d create mode 100644 testsuite/j.r create mode 100644 testsuite/j.t create mode 100644 testsuite/k.d create mode 100644 testsuite/k.r create mode 100644 testsuite/k.t create mode 100644 testsuite/k1.err.posix create mode 100644 testsuite/k2.err create mode 100644 testsuite/k2.pr create mode 100644 testsuite/k3.err create mode 100644 testsuite/k3.pr create mode 100644 testsuite/k4.err create mode 100644 testsuite/k4.pr create mode 100644 testsuite/l.d create mode 100644 testsuite/l.r create mode 100644 testsuite/l.t create mode 100644 testsuite/m.d create mode 100644 testsuite/m.err create mode 100644 testsuite/m.pr create mode 100644 testsuite/m.r create mode 100644 testsuite/m.t create mode 100644 testsuite/n.d create mode 100644 testsuite/n.r create mode 100644 testsuite/n.t create mode 100644 testsuite/nl.err create mode 100644 testsuite/nl.pr create mode 100644 testsuite/nl1.d create mode 100644 testsuite/nl1.r create mode 100644 testsuite/nl1.t create mode 100644 testsuite/nl2.d create mode 100644 testsuite/nl2.r create mode 100644 testsuite/nl2.t create mode 100644 testsuite/p.d create mode 100644 testsuite/p.r create mode 100644 testsuite/p.t create mode 100644 testsuite/q.d create mode 100644 testsuite/q.r create mode 100644 testsuite/q.t create mode 100644 testsuite/q1.err create mode 100644 testsuite/q1.pr create mode 100644 testsuite/r1.d create mode 100644 testsuite/r1.err.posix create mode 100644 testsuite/r1.r create mode 100644 testsuite/r1.t create mode 100644 testsuite/r2.d create mode 100644 testsuite/r2.err create mode 100644 testsuite/r2.pr create mode 100644 testsuite/r2.r create mode 100644 testsuite/r2.t create mode 100644 testsuite/r3.d create mode 100644 testsuite/r3.r create mode 100644 testsuite/r3.t create mode 100644 testsuite/s1.d create mode 100644 testsuite/s1.err create mode 100644 testsuite/s1.pr create mode 100644 testsuite/s1.r create mode 100644 testsuite/s1.t create mode 100644 testsuite/s10.err create mode 100644 testsuite/s10.pr create mode 100644 testsuite/s2.d create mode 100644 testsuite/s2.err create mode 100644 testsuite/s2.pr create mode 100644 testsuite/s2.r create mode 100644 testsuite/s2.t create mode 100644 testsuite/s3.d create mode 100644 testsuite/s3.err create mode 100644 testsuite/s3.pr create mode 100644 testsuite/s3.r create mode 100644 testsuite/s3.t create mode 100644 testsuite/s4.err create mode 100644 testsuite/s4.pr create mode 100644 testsuite/s5.err create mode 100644 testsuite/s5.pr create mode 100644 testsuite/s6.err create mode 100644 testsuite/s6.pr create mode 100644 testsuite/s7.err create mode 100644 testsuite/s7.pr create mode 100644 testsuite/s8.err create mode 100644 testsuite/s8.pr create mode 100644 testsuite/s9.err create mode 100644 testsuite/s9.pr create mode 100644 testsuite/t.d create mode 100644 testsuite/t.r create mode 100644 testsuite/t1.d create mode 100644 testsuite/t1.err create mode 100644 testsuite/t1.pr create mode 100644 testsuite/t1.r create mode 100644 testsuite/t1.t create mode 100644 testsuite/t2.d create mode 100644 testsuite/t2.err create mode 100644 testsuite/t2.pr create mode 100644 testsuite/t2.r create mode 100644 testsuite/t2.t create mode 100644 testsuite/u.d create mode 100644 testsuite/u.err create mode 100644 testsuite/u.pr create mode 100644 testsuite/u.r create mode 100644 testsuite/u.t create mode 100644 testsuite/v.d create mode 100644 testsuite/v.r create mode 100644 testsuite/v.t create mode 100644 testsuite/w.d create mode 100644 testsuite/w.r create mode 100644 testsuite/w.t create mode 100644 testsuite/w1.err create mode 100644 testsuite/w1.pr create mode 100644 testsuite/w2.err create mode 100644 testsuite/w2.pr create mode 100644 testsuite/w3.err create mode 100644 testsuite/w3.pr create mode 100644 testsuite/x.d create mode 100644 testsuite/x.err create mode 100644 testsuite/x.pr create mode 100644 testsuite/x.r create mode 100644 testsuite/x.t create mode 100644 testsuite/z.err create mode 100644 testsuite/z.pr diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..068a449 --- /dev/null +++ b/AUTHORS @@ -0,0 +1,25 @@ +GNU ed is maintained by Antonio Diaz Diaz. + +Before version 0.3, GNU ed and its man page were written and maintained +(sic) by Andrew L. Moore. + +The original info page and GNUification of the code were graciously +provided by François Pinard. + +------------------- + +GNU ed THANKS file - last updated on 15 November 1994. + +GNU ed originated with the editor algorithm from Brian W. Kernighan & +P. J. Plauger's wonderful book "Software Tools in Pascal," Addison-Wesley, +1981. GNU ed has also benefitted from the contributions of numerous people +who reported problems, suggested various improvements or submitted actual +code. Among these are the following: + +Eric Backus +Karl Berry +Theo Deraadt +Kaveh R. Ghazi +Mike Haertel +François Pinard +Rodney Ruddock diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..4432540 --- /dev/null +++ b/COPYING @@ -0,0 +1,676 @@ + + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. + diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..c11f22e --- /dev/null +++ b/ChangeLog @@ -0,0 +1,146 @@ +2009-07-10 Antonio Diaz Diaz + + * Version 1.4 released. + * buffer.c, main_loop.c: Undo now restores the modified status. + * regex.c (search_and_replace): Fixed a race condition with user + interrupt. + * signal.c: Added functions resize_line_buffer and + resize_undo_buffer to definitively fix the aliasing warnings. + * Some minor corrections have been made to the manual. + +2009-05-24 Antonio Diaz Diaz + + * Version 1.3 released. + * carg_parser.c (ap_resize_buffer): An aliasing related segfault + that only occurs when overoptimizing with GCC on some + architectures (alpha, sparc) has been (hopefully) fixed. + * signal.c (resize_buffer): Likewise. + +2009-01-31 Antonio Diaz Diaz + + * Version 1.2 released. + * configure: Locale has been fixed to "C". + * Makefile.in: Man page is now installed by default. + * "make install-info" should now work on Debian and OS X. + * ed.texinfo: License updated to GFDL version 1.3 or later. + +2008-10-14 Antonio Diaz Diaz + + * Version 1.1 released. + * configure: Quote arguments stored in config.status. + +2008-08-21 Antonio Diaz Diaz + + * Version 1.0 released. + * configure: Added option `--program-prefix'. + * signal.c (strip_escapes): Buffer overflow fixed. + * signal.c (resize_buffer): Pointer aliasing warning fixed. + +2008-02-24 Antonio Diaz Diaz + + * Version 0.9 released. + * signal.c (sighup_handler): Return 0 if no error. + * Arg_parser updated to 1.1. + +2007-08-18 Antonio Diaz Diaz + + * Version 0.8 released. + * check.sh: Testsuite exits unsuccesfully in case of error. + * ed.1: Fixed some minor problems in the manual page. + * ed.texinfo: Added 21kB of legalese (fdl.texinfo). + +2007-07-18 Antonio Diaz Diaz + + * Version 0.7 released. + * buffer.c (dec_addr): Now returns correct address when wrapping. + +2007-06-29 Antonio Diaz Diaz + + * Version 0.6 released. + * License updated to GPL version 3 or later. + * signal.c (sigwinch_handler, set_signal): + Fixed two minor compatibility problems. + * main_loop.c (main_loop): + Fixed an infinite loop when reading an empty script. + +2007-03-09 Antonio Diaz Diaz + + * Version 0.5 released. + * main_loop.c (next_addr): '%' reimplemented as it was in ed 0.2. + +2007-01-15 Antonio Diaz Diaz + + * Version 0.4 released. + * Fixed some minor problems in the testsuite. + +2006-11-11 Antonio Diaz Diaz + + * Version 0.3 released. + * buffer.c (open_sbuf): Fixed symlink vulnerability using `tmpfile'. + * signal.c: Fixed signal handling for SIGINT. + * main_loop.c (exec_command): Fixed `c' and `i' commands with + address 0. + * The pause mode has been removed. + * main.c: Added new options `--loose-exit-status' and `--verbose'. + * carg_parser.c: New argument parser that replaces `getopt_long'. + * `configure' and `Makefile.in' have been replaced. + * Removed recursive make for testsuite. + * Created directory `doc'. + * Removed all pre ISO C89 code. + * Removed all global variables. + * ed.texinfo: Added the changes from Andrew and some mine. + +Sun Jun 26 22:21:59 1994 Andrew Moore + + * GNU ed 0.2 release. + + * main.c (yank_lines): Added yank buffer. + A range of lines may be cut ('d') to or yanked ('y') from + a yank buffer. Lines in the buffer may be put ('x') + after the addressed line (. by default). + + * main.c (display_lines): Page output of listed ('l') lines + if isatty(0). + + * main.c (main): Replaced isatty(0) with is_regular_file(). + Errors in piped scripts, as opposed to regular scripts or + here documents, do not force ed to exit. + + * Capitilize error messages per the standard. + +Wed Jun 22 01:06:11 1994 Andrew Moore + + * ed.h: Generic definition of INT_MAX + + * signal.c: Added #ifndef SIG_ERR + +Tue Apr 19 10:52:51 1994 Andrew Moore + + * Version 0.1. Initial release for GNU. + + * main.c (exec_command): Add comment command `#'. + +Mon Mar 21 21:58:11 PST 1994 Andrew Moore + + * Use umask 077 to open buffer file. + +Sat Mar 19 14:06:52 PST 1994 Andrew Moore + + * Removed problematic DES and insque support. + +Wed Jan 19 20:42:50 PST 1994 Andrew Moore + + * Added reliable signal(2) for SysV. + +Dec 1993 François Pinard + + * GNUified ed. + + +Copyright (C) 1993 François Pinard +Copyright (C) 1994 Andrew Moore +Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + +This file is a collection of facts, and thus it is not copyrightable, +but just in case, I give you unlimited permission to copy, distribute +and modify it. diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..3661149 --- /dev/null +++ b/INSTALL @@ -0,0 +1,56 @@ +Requirements +------------ +You'll need a C compiler and a C library compatible with GNU libc. +I use gcc 4.3.3 and 3.3.6, but the code should compile with any +standards compliant compiler. +Gcc is available at http://gcc.gnu.org. + + +Procedure +--------- +1. Unpack the archive if you have not done so already: + + lzip -cd ed[version].tar.lz | tar -xf - +or + gzip -cd ed[version].tar.gz | tar -xf - + +This creates the directory ./ed[version] containing the source from +the main archive. + +2. Change to ed directory and run configure. + (Try `configure --help' for usage instructions). + + cd ed[version] + ./configure + +3. Run make. + + make + +4. Optionally, type `make check' to run the tests that come with ed. + +5. Type `make install' to install the program and any data files and + documentation. + + +Another way +----------- +You can also compile ed into a separate directory. To do this, you +must use a version of `make' that supports the `VPATH' variable, such +as GNU `make'. `cd' to the directory where you want the object files +and executables to go and run the `configure' script. `configure' +automatically checks for the source code in `.', in `..' and in the +directory that `configure' is in. + +`configure' recognizes the option `--srcdir=DIR' to control where to +look for the sources. Usually `configure' can determine that directory +automatically. + +After running `configure', you can run `make' and `make install' as +explained above. + + +Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + +This file is free documentation: you have unlimited permission to copy, +distribute and modify it. diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..551784d --- /dev/null +++ b/Makefile.in @@ -0,0 +1,113 @@ + +DISTNAME = $(progname)-$(progversion) +INSTALL = install +INSTALL_PROGRAM = $(INSTALL) -p -m 755 +INSTALL_DATA = $(INSTALL) -p -m 644 +INSTALL_DIR = $(INSTALL) -d -m 755 +SHELL = /bin/sh + +objs = buffer.o carg_parser.o global.o io.o \ + main.o main_loop.o regex.o signal.o + + +.PHONY : all install install-info install-man install-strip \ + uninstall uninstall-info uninstall-man \ + doc info man check dist clean distclean + +all : $(progname) + +$(progname) : $(objs) + $(CC) $(LDFLAGS) -o $(progname) $(objs) + +$(progname)_profiled : $(objs) + $(CC) $(LDFLAGS) -pg -o $(progname)_profiled $(objs) + +main.o : main.c + $(CC) $(CPPFLAGS) $(CFLAGS) -DPROGVERSION=\"$(progversion)\" -c -o $@ $< + +%.o : %.c + $(CC) $(CPPFLAGS) $(CFLAGS) -c -o $@ $< + +$(objs) : Makefile ed.h +carg_parser.o : carg_parser.h +main.o : carg_parser.h + + +doc : info + +info : $(VPATH)/doc/$(progname).info + +$(VPATH)/doc/$(progname).info : $(VPATH)/doc/$(progname).texinfo + cd $(VPATH)/doc && makeinfo $(progname).texinfo + +Makefile : $(VPATH)/configure $(VPATH)/Makefile.in + ./config.status + +check : all $(VPATH)/testsuite/check.sh + @$(VPATH)/testsuite/check.sh $(VPATH)/testsuite + +install : all install-info install-man + if test ! -d $(DESTDIR)$(bindir) ; then $(INSTALL_DIR) $(DESTDIR)$(bindir) ; fi + $(INSTALL_PROGRAM) ./$(progname) $(DESTDIR)$(bindir)/$(program_prefix)$(progname) + -rm -f $(DESTDIR)$(bindir)/$(program_prefix)r$(progname) + cd $(DESTDIR)$(bindir) && ln -s $(program_prefix)$(progname) $(program_prefix)r$(progname) + +install-info : + if test ! -d $(DESTDIR)$(infodir) ; then $(INSTALL_DIR) $(DESTDIR)$(infodir) ; fi + $(INSTALL_DATA) $(VPATH)/doc/$(progname).info $(DESTDIR)$(infodir)/$(program_prefix)$(progname).info + -install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$(program_prefix)$(progname).info + +install-man : + if test ! -d $(DESTDIR)$(mandir)/man1 ; then $(INSTALL_DIR) $(DESTDIR)$(mandir)/man1 ; fi + $(INSTALL_DATA) $(VPATH)/doc/$(progname).1 $(DESTDIR)$(mandir)/man1/$(program_prefix)$(progname).1 + -rm -f $(DESTDIR)$(mandir)/man1/$(program_prefix)r$(progname).1 + cd $(DESTDIR)$(mandir)/man1 && ln -s $(program_prefix)$(progname).1 $(program_prefix)r$(progname).1 + +install-strip : all + $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install + +uninstall : uninstall-info uninstall-man + -rm -f $(DESTDIR)$(bindir)/$(program_prefix)$(progname) + -rm -f $(DESTDIR)$(bindir)/$(program_prefix)r$(progname) + +uninstall-info : + -install-info --remove $(DESTDIR)$(infodir)/$(program_prefix)$(progname).info $(DESTDIR)$(infodir)/dir + -rm -f $(DESTDIR)$(infodir)/$(program_prefix)$(progname).info + +uninstall-man : + -rm -f $(DESTDIR)$(mandir)/man1/$(program_prefix)$(progname).1 + -rm -f $(DESTDIR)$(mandir)/man1/$(program_prefix)r$(progname).1 + +dist : + ln -sf $(VPATH) $(DISTNAME) + tar -cvf $(DISTNAME).tar \ + $(DISTNAME)/AUTHORS \ + $(DISTNAME)/COPYING \ + $(DISTNAME)/ChangeLog \ + $(DISTNAME)/INSTALL \ + $(DISTNAME)/Makefile.in \ + $(DISTNAME)/NEWS \ + $(DISTNAME)/README \ + $(DISTNAME)/TODO \ + $(DISTNAME)/configure \ + $(DISTNAME)/doc/$(progname).1 \ + $(DISTNAME)/doc/$(progname).info \ + $(DISTNAME)/doc/$(progname).texinfo \ + $(DISTNAME)/doc/fdl.texinfo \ + $(DISTNAME)/testsuite/check.sh \ + $(DISTNAME)/testsuite/*.t \ + $(DISTNAME)/testsuite/*.d \ + $(DISTNAME)/testsuite/*.r \ + $(DISTNAME)/testsuite/*.pr \ + $(DISTNAME)/testsuite/*.err \ + $(DISTNAME)/testsuite/*.posix \ + $(DISTNAME)/*.h \ + $(DISTNAME)/*.c + rm -f $(DISTNAME) + lzip -v -9 $(DISTNAME).tar + +clean : + -rm -f $(progname) r$(progname) $(progname)_profiled $(objs) + +distclean : clean + -rm -f Makefile config.status *.tar *.tar.lz diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..bfb09e2 --- /dev/null +++ b/NEWS @@ -0,0 +1,12 @@ +Changes in version 1.4: + +The undo command has been fixed to restore the modified status of the +buffer being edited. + +A race condition with user interrupt has been fixed in +search_and_replace. + +The functions resize_line_buffer and resize_undo_buffer have been added +to definitively fix the aliasing warnings. + +Some minor corrections have been made to the manual. diff --git a/README b/README new file mode 100644 index 0000000..086e7db --- /dev/null +++ b/README @@ -0,0 +1,152 @@ +GNU ed is an 8-bit clean, more or less POSIX-compliant implementation of +the standard Unix line editor. These days, full-screen editors have +rendered `ed' mostly of historical interest. Nonetheless, it appeals to +a handful of aging programmers who still believe that "Small is Beautiful". + +Extensions to and deviations from the POSIX standard are described below. + +See the file INSTALL for compilation and installation instructions. + +Try "ed --help" for usage instructions. + +Report bugs to . + +Ed home page: http://www.gnu.org/software/ed/ed.html + +For a description of the ed algorithm, see Kernighan and Plauger's book +"Software Tools in Pascal," Addison-Wesley, 1981. + + +GNU ed(1) is not strictly POSIX compliant, as described in the +POSIX 1003.1-2004 document. The following is a summary of omissions +and extensions to, and deviations from, the POSIX standard. + +OMISSIONS +--------- + * Locale(3) is not supported. + +EXTENSIONS +---------- + * Though GNU ed is not a stream editor, it can be used to edit binary files. + To assist in binary editing, when a file containing at least one ASCII + NUL character is written, a newline is not appended if it did not + already contain one upon reading. In particular, reading /dev/null + prior to writing prevents appending a newline to a binary file. + + For example, to create a file with GNU ed containing a single NUL character: + $ ed file + a + ^@ + . + r /dev/null + wq + + Similarly, to remove a newline from the end of binary `file': + $ ed file + r /dev/null + wq + + * BSD commands have been implemented wherever they do not conflict with + the POSIX standard. The BSD-ism's included are: + * `s' (i.e., s[n][rgp]*) to repeat a previous substitution, + * `W' for appending text to an existing file, + * `wq' for exiting after a write, and + * `z' for scrolling through the buffer. + + * The POSIX interactive global commands `G' and `V' are extended to + support multiple commands, including `a', `i' and `c'. The command + format is the same as for the global commands `g' and `v', i.e., one + command per line with each line, except for the last, ending in a + backslash (\). + + * The file commands `E', `e', `r', `W' and `w' process a + argument for backslash escapes; i.e., any character preceded by a + backslash is interpreted literally. If the first unescaped character + of a argument is a bang (!), then the rest of the line is + interpreted as a shell command, and no escape processing is performed + by GNU ed. + + * For SunOS ed(1) compatibility, GNU ed runs in restricted mode if invoked + as red. This limits editing of files in the local directory only and + prohibits shell commands. + +DEVIATIONS +---------- + * For backwards compatibility, the POSIX rule that says a range of + addresses cannot be used where only a single address is expected has + been relaxed. + + * To support the BSD `s' command (see EXTENSIONS above), + substitution patterns cannot be delimited by numbers or the characters + `r', `g' and `p'. In contrast, POSIX specifies any character expect + space or newline can used as a delimiter. + + * Since the behavior of `u' (undo) within a `g' (global) command list is + not specified by POSIX, GNU ed follows the behavior of the SunOS ed: + undo forces a global command list to be executed only once, rather than + for each line matching a global pattern. In addtion, each instance of + `u' within a global command undoes all previous commands (including + undo's) in the command list. This seems the best way, since the + alternatives are either too complicated to implement or too confusing + to use. + + * The `m' (move) command within a `g' command list also follows the SunOS + ed implementation: any moved lines are removed from the global command's + `active' list. + + * If GNU ed is invoked with a name argument prefixed by a bang (!), then + the remainder of the argument is interpreted as a shell command. To invoke + ed on a file whose name starts with bang, prefix the name with a + (quoted) backslash. + + * For backwards compatibility, errors in piped scripts do not force ed + to exit. POSIX only specifies ed's response for input via regular + files (including here documents) or tty's. + + +TESTSUITE +--------- +The files in the `testsuite' directory with suffixes `.t', `.d', `.r', +`.pr' and `.err' are used for testing ed. To run the tests, configure +the package and type `make check' from the build directory. The tests do +not exhaustively verify POSIX compliance nor do they verify correct +8-bit or long line support. + +The test file suffixes have the following meanings: +.t Template - a list of ed commands from which an ed script is + constructed +.d Data - read by an ed script +.r Result - the expected output after processing data via an ed + script. +.pr Result from a piped ed script. +.err Error - invalid ed commands that should generate an error + +The output of the tests is written to the files errs.ck, pipes.ck and +scripts.ck. At the end of the tests, these files are grep'ed for error +messages, which look like: + + *** The script u.ed exited abnormally *** +or: + *** Output u.o of script u.ed is incorrect *** + +The POSIX requirement that an address range not be used where at most +a single address is expected has been relaxed in this version of ed. +Therefore, the following script templates are disabled: +=-err.t.posix +a1-err.posix +i1-err.posix +k1-err.posix +r1-err.posix + +To use these, remove the .posix suffix and run the tests as described +above. + + +Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + +This file is free documentation: you have unlimited permission to copy, +distribute and modify it. + +The file Makefile.in is a data file used by configure to produce the +Makefile. It has the same copyright owner and permissions that this +file. diff --git a/TODO b/TODO new file mode 100644 index 0000000..7a4b74f --- /dev/null +++ b/TODO @@ -0,0 +1,15 @@ +Some missing tests: +0) g/./s^@^@ - okay: NULs in commands +1) g/./s/^@/ - okay: NULs in patterns +2) a + hello^V^Jworld + . - okay: embedded newlines in insert mode +3) ed "" - error: invalid filename +4) red .. - error: restricted +5) red / - error: restricted +5) red !xx - error: restricted +6) ed -x - verify: 8-bit clean +7) ed - verify: long-line support +8) ed - verify: interactive/help mode +9) G/pat/ - verify: global interactive command +10) V/pat/ - verify: global interactive command diff --git a/buffer.c b/buffer.c new file mode 100644 index 0000000..fbb1cfc --- /dev/null +++ b/buffer.c @@ -0,0 +1,622 @@ +/* buffer.c: scratch-file buffer routines for the ed line editor. */ +/* GNU ed - The GNU line editor. + Copyright (C) 1993, 1994 Andrew Moore, Talke Studio + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ed.h" + + +static int current_addr_ = 0; /* current address in editor buffer */ +static int last_addr_ = 0; /* last address in editor buffer */ +static char isbinary_ = 0; /* if set, buffer contains ASCII NULs */ +static char modified_ = 0; /* if set, buffer modified since last write */ +static char newline_added_ = 0; /* if set, newline appended to input file */ + +static int seek_write = 0; /* seek before writing */ +static FILE *sfp = 0; /* scratch file pointer */ +static long sfpos = 0; /* scratch file position */ +static line_t buffer_head; /* editor buffer ( linked list of line_t )*/ +static line_t yank_buffer_head; + + +int current_addr( void ) { return current_addr_; } +int inc_current_addr( void ) + { if( ++current_addr_ > last_addr_ ) current_addr_ = last_addr_; + return current_addr_; } +void set_current_addr( const int addr ) { current_addr_ = addr; } + +int last_addr( void ) { return last_addr_; } + +char isbinary( void ) { return isbinary_; } +void set_binary( void ) { isbinary_ = 1; } + +char modified( void ) { return modified_; } +void set_modified( const char m ) { modified_ = m; } + +char newline_added( void ) { return newline_added_; } +void set_newline_added( void ) { newline_added_ = 1; } + + +int inc_addr( int addr ) + { if( ++addr > last_addr_ ) addr = 0; return addr; } + +int dec_addr( int addr ) + { if( --addr < 0 ) addr = last_addr_; return addr; } + + +/* link next and previous nodes */ +static void link_nodes( line_t *prev, line_t *next ) + { prev->q_forw = next; next->q_back = prev; } + + +/* insert node into circular queue after previous */ +static void insert_node( line_t *node, line_t *prev ) + { + link_nodes( node, prev->q_forw ); + link_nodes( prev, node ); + } + + +/* remove node from circular queue */ +//static void remove_node( const line_t *node ) +// { link_nodes( node->q_back, node->q_forw ); } + + +/* add a line node in the editor buffer after the given line */ +static void add_line_node( line_t *lp, const int addr ) + { + line_t *p = search_line_node( addr ); + insert_node( lp, p ); + ++last_addr_; + } + + +/* return a pointer to a copy of a line node, or to a new node if lp == 0 */ +static line_t *dup_line_node( line_t *lp ) + { + line_t *p = ( line_t *) malloc( sizeof( line_t ) ); + if( !p ) + { + show_strerror( 0, errno ); + set_error_msg( "Memory exhausted" ); + return 0; + } + if( lp ) { p->pos = lp->pos; p->len = lp->len; } + return p; + } + + +/* insert text from stdin to after line n; stop when either a single + period is read or EOF */ +char append_lines( const char *ibufp, const int addr, const char isglobal ) + { + int len; + undo_t *up = 0; + current_addr_ = addr; + + while( 1 ) + { + if( !isglobal ) + { + ibufp = get_tty_line( &len ); + if( !ibufp ) return 0; + if( !len || ibufp[len-1] != '\n' ) { clearerr( stdin ); return !len; } + } + else + { + if( !*ibufp ) return 1; + for( len = 0; ibufp[len++] != '\n'; ) ; + } + if( len == 2 && ibufp[0] == '.' ) return 1; + disable_interrupts(); + if( !put_sbuf_line( ibufp, current_addr_ ) ) + { enable_interrupts(); return 0; } + if( up ) up->tail = search_line_node( current_addr_ ); + else if( !( up = push_undo_atom( UADD, -1, -1 ) ) ) + { enable_interrupts(); return 0; } + ibufp += len; + modified_ = 1; + enable_interrupts(); + } + } + + +static void clear_yank_buffer( void ) + { + line_t *lp = yank_buffer_head.q_forw; + + disable_interrupts(); + while( lp != &yank_buffer_head ) + { + line_t *cp = lp->q_forw; + link_nodes( lp->q_back, lp->q_forw ); + free( lp ); + lp = cp; + } + enable_interrupts(); + } + + +/* close scratch file */ +char close_sbuf( void ) + { + clear_yank_buffer(); + clear_undo_stack(); + if( sfp ) + { + if( fclose( sfp ) < 0 ) + { + show_strerror( 0, errno ); + set_error_msg( "Cannot close temp file" ); + return 0; + } + sfp = 0; + } + sfpos = 0; seek_write = 0; + return 1; + } + + +/* copy a range of lines; return false if error */ +char copy_lines( const int first_addr, const int second_addr, const int addr ) + { + line_t *lp, *np = search_line_node( first_addr ); + undo_t *up = 0; + int n = second_addr - first_addr + 1; + int m = 0; + + current_addr_ = addr; + if( addr >= first_addr && addr < second_addr ) + { + n = addr - first_addr + 1; + m = second_addr - addr; + } + for( ; n > 0; n = m, m = 0, np = search_line_node( current_addr_ + 1 ) ) + for( ; n-- > 0; np = np->q_forw ) + { + disable_interrupts(); + lp = dup_line_node( np ); + if( !lp ) { enable_interrupts(); return 0; } + add_line_node( lp, current_addr_++ ); + if( up ) up->tail = lp; + else if( !( up = push_undo_atom( UADD, -1, -1 ) ) ) + { enable_interrupts(); return 0; } + modified_ = 1; + enable_interrupts(); + } + return 1; + } + + +/* delete a range of lines */ +char delete_lines( const int from, const int to, const char isglobal ) + { + line_t *n, *p; + + if( !yank_lines( from, to ) ) return 0; + disable_interrupts(); + if( !push_undo_atom( UDEL, from, to ) ) + { enable_interrupts(); return 0; } + n = search_line_node( inc_addr( to ) ); + p = search_line_node( from - 1 ); /* this search_line_node last! */ + if( isglobal ) unset_active_nodes( p->q_forw, n ); + link_nodes( p, n ); + last_addr_ -= to - from + 1; + current_addr_ = from - 1; + modified_ = 1; + enable_interrupts(); + return 1; + } + + +/* return line number of pointer */ +int get_line_node_addr( const line_t *lp ) + { + const line_t *cp = &buffer_head; + int addr = 0; + + while( cp != lp && ( cp = cp->q_forw ) != &buffer_head ) ++addr; + if( addr && cp == &buffer_head ) + { set_error_msg( "Invalid address" ); return -1; } + return addr; + } + + +/* get a line of text from the scratch file; return pointer to the text */ +char *get_sbuf_line( const line_t *lp ) + { + static char *buf = 0; + static int bufsz = 0; + int len, ct; + + if( lp == &buffer_head ) return 0; + seek_write = 1; /* force seek on write */ + /* out of position */ + if( sfpos != lp->pos ) + { + sfpos = lp->pos; + if( fseek( sfp, sfpos, SEEK_SET ) < 0 ) + { + show_strerror( 0, errno ); + set_error_msg( "Cannot seek temp file" ); + return 0; + } + } + len = lp->len; + if( !resize_buffer( &buf, &bufsz, len + 1 ) ) return 0; + ct = fread( buf, 1, len, sfp ); + if( ct < 0 || ct != len ) + { + show_strerror( 0, errno ); + set_error_msg( "Cannot read temp file" ); + return 0; + } + sfpos += len; /* update file position */ + buf[len] = 0; + return buf; + } + + +/* open scratch buffer; initialize line queue */ +char init_buffers( void ) + { + /* Read stdin one character at a time to avoid i/o contention + with shell escapes invoked by nonterminal input, e.g., + ed - <len ) ) return 0; + memcpy( buf + size, s, bp->len ); + size += bp->len; + bp = bp->q_forw; + } + if( !resize_buffer( &buf, &bufsz, size + 2 ) ) return 0; + memcpy( buf + size, "\n", 2 ); + if( !delete_lines( from, to, isglobal ) ) return 0; + current_addr_ = from - 1; + disable_interrupts(); + if( !put_sbuf_line( buf, current_addr_ ) || + !push_undo_atom( UADD, -1, -1 ) ) { enable_interrupts(); return 0; } + modified_ = 1; + enable_interrupts(); + return 1; + } + + +/* move a range of lines */ +char move_lines( const int first_addr, const int second_addr, const int addr, + const char isglobal ) + { + line_t *b1, *a1, *b2, *a2; + int n = inc_addr( second_addr ); + int p = first_addr - 1; + + disable_interrupts(); + if( addr == first_addr - 1 || addr == second_addr ) + { + a2 = search_line_node( n ); + b2 = search_line_node( p ); + current_addr_ = second_addr; + } + else if( !push_undo_atom( UMOV, p, n ) || + !push_undo_atom( UMOV, addr, inc_addr( addr ) ) ) + { enable_interrupts(); return 0; } + else + { + a1 = search_line_node( n ); + if( addr < first_addr ) + { + b1 = search_line_node( p ); + b2 = search_line_node( addr ); /* this search_line_node last! */ + } + else + { + b2 = search_line_node( addr ); + b1 = search_line_node( p ); /* this search_line_node last! */ + } + a2 = b2->q_forw; + link_nodes( b2, b1->q_forw ); + link_nodes( a1->q_back, a2 ); + link_nodes( b1, a1 ); + current_addr_ = addr + ( ( addr < first_addr ) ? + second_addr - first_addr + 1 : 0 ); + } + if( isglobal ) unset_active_nodes( b2->q_forw, a2 ); + modified_ = 1; + enable_interrupts(); + return 1; + } + + +/* open scratch file */ +char open_sbuf( void ) + { + isbinary_ = newline_added_ = 0; + sfp = tmpfile(); + if( !sfp ) + { + show_strerror( 0, errno ); + set_error_msg( "Cannot open temp file" ); + return 0; + } + return 1; + } + + +int path_max( const char *filename ) + { + long result; + if( !filename ) filename = "/"; + errno = 0; + result = pathconf( filename, _PC_PATH_MAX ); + if( result < 0 ) { if( errno ) result = 256; else result = 1024; } + else if( result < 256 ) result = 256; + return result; + } + + +/* append lines from the yank buffer */ +char put_lines( const int addr ) + { + undo_t *up = 0; + line_t *lp = yank_buffer_head.q_forw, *cp; + + if( lp == &yank_buffer_head ) { set_error_msg( "Nothing to put" ); return 0; } + current_addr_ = addr; + while( lp != &yank_buffer_head ) + { + disable_interrupts(); + if( !( cp = dup_line_node( lp ) ) ) { enable_interrupts(); return 0; } + add_line_node( cp, current_addr_++ ); + if( up ) up->tail = cp; + else if( !( up = push_undo_atom( UADD, -1, -1 ) ) ) + { enable_interrupts(); return 0; } + modified_ = 1; + lp = lp->q_forw; + enable_interrupts(); + } + return 1; + } + + +/* write a line of text to the scratch file and add a line node to the + editor buffer; return a pointer to the end of the text */ +const char *put_sbuf_line( const char *cs, const int addr ) + { + line_t *lp = dup_line_node( 0 ); + int len, ct; + const char *s = cs; + + if( !lp ) return 0; + while( *s != '\n' ) ++s; /* assert: cs is '\n' terminated */ + if( s - cs >= INT_MAX ) /* max chars per line */ + { set_error_msg( "Line too long" ); return 0; } + len = s - cs; + /* out of position */ + if( seek_write ) + { + if( fseek( sfp, 0L, SEEK_END ) < 0 ) + { + show_strerror( 0, errno ); + set_error_msg( "Cannot seek temp file" ); + return 0; + } + sfpos = ftell( sfp ); + seek_write = 0; + } + ct = fwrite( cs, 1, len, sfp ); /* assert: interrupts disabled */ + if( ct < 0 || ct != len ) + { + sfpos = -1; + show_strerror( 0, errno ); + set_error_msg( "Cannot write temp file" ); + return 0; + } + lp->len = len; lp->pos = sfpos; + add_line_node( lp, addr ); + ++current_addr_; + sfpos += len; /* update file position */ + return ++s; + } + + +/* return pointer to a line node in the editor buffer */ +line_t *search_line_node( const int addr ) + { + static line_t *lp = &buffer_head; + static int o_addr = 0; + + disable_interrupts(); + if( o_addr < addr ) + { + if( o_addr + last_addr_ >= 2 * addr ) + while( o_addr < addr ) { ++o_addr; lp = lp->q_forw; } + else + { + lp = buffer_head.q_back; o_addr = last_addr_; + while( o_addr > addr ) { --o_addr; lp = lp->q_back; } + } + } + else if( o_addr <= 2 * addr ) + while( o_addr > addr ) { --o_addr; lp = lp->q_back; } + else + { lp = &buffer_head; o_addr = 0; + while( o_addr < addr ) { ++o_addr; lp = lp->q_forw; } } + enable_interrupts(); + return lp; + } + + +/* copy a range of lines to the cut buffer */ +char yank_lines( const int from, const int to ) + { + line_t *ep = search_line_node( inc_addr( to ) ); + line_t *bp = search_line_node( from ); + line_t *lp = &yank_buffer_head; + line_t *cp; + + clear_yank_buffer(); + while( bp != ep ) + { + disable_interrupts(); + cp = dup_line_node( bp ); + if( !cp ) { enable_interrupts(); return 0; } + insert_node( cp, lp ); + bp = bp->q_forw; lp = cp; + enable_interrupts(); + } + return 1; + } + + +static undo_t *ustack = 0; /* undo stack */ +static int usize = 0; /* ustack size (in bytes) */ +static int u_ptr = 0; /* undo stack pointer */ +static int u_current_addr = -1; /* if < 0, undo disabled */ +static int u_addr_last = -1; /* if < 0, undo disabled */ +static char u_modified = 0; + + +void clear_undo_stack( void ) + { + while( u_ptr-- ) + if( ustack[u_ptr].type == UDEL ) + { + line_t *ep = ustack[u_ptr].tail->q_forw; + line_t *lp = ustack[u_ptr].head; + while( lp != ep ) + { + line_t *tl = lp->q_forw; + unmark_line_node( lp ); + free( lp ); + lp = tl; + } + } + u_ptr = 0; + u_current_addr = current_addr_; + u_addr_last = last_addr_; + u_modified = modified_; + } + + +void reset_undo_state( void ) + { + clear_undo_stack(); + u_current_addr = u_addr_last = -1; + u_modified = 0; + } + + +/* return pointer to intialized undo node */ +undo_t *push_undo_atom( const int type, const int from, const int to ) + { + disable_interrupts(); + if( !resize_undo_buffer( &ustack, &usize, ( u_ptr + 1 ) * sizeof( undo_t ) ) ) + { + show_strerror( 0, errno ); + set_error_msg( "Memory exhausted" ); + if( ustack ) + { + clear_undo_stack(); + free( ustack ); + ustack = 0; + usize = u_ptr = 0; + u_current_addr = u_addr_last = -1; + } + enable_interrupts(); + return 0; + } + enable_interrupts(); + ustack[u_ptr].type = type; + ustack[u_ptr].tail = search_line_node( ( to >= 0 ) ? to : current_addr_ ); + ustack[u_ptr].head = search_line_node( ( from >= 0 ) ? from : current_addr_ ); + return ustack + u_ptr++; + } + + +/* undo last change to the editor buffer */ +char undo( const char isglobal ) + { + int n; + const int o_current_addr = current_addr_; + const int o_addr_last = last_addr_; + const char o_modified = modified_; + + if( u_ptr <= 0 || u_current_addr < 0 || u_addr_last < 0 ) + { set_error_msg( "Nothing to undo" ); return 0; } + search_line_node( 0 ); /* reset cached value */ + disable_interrupts(); + for( n = u_ptr - 1; n >= 0; --n ) + { + switch( ustack[n].type ) + { + case UADD: link_nodes( ustack[n].head->q_back, ustack[n].tail->q_forw ); + break; + case UDEL: link_nodes( ustack[n].head->q_back, ustack[n].head ); + link_nodes( ustack[n].tail, ustack[n].tail->q_forw ); + break; + case UMOV: + case VMOV: link_nodes( ustack[n-1].head, ustack[n].head->q_forw ); + link_nodes( ustack[n].tail->q_back, ustack[n-1].tail ); + link_nodes( ustack[n].head, ustack[n].tail ); --n; + break; + } + ustack[n].type ^= 1; + } + /* reverse undo stack order */ + for( n = 0; 2 * n < u_ptr - 1; ++n ) + { + undo_t tmp = ustack[n]; + ustack[n] = ustack[u_ptr-1-n]; ustack[u_ptr-1-n] = tmp; + } + if( isglobal ) clear_active_list(); + current_addr_ = u_current_addr; u_current_addr = o_current_addr; + last_addr_ = u_addr_last; u_addr_last = o_addr_last; + modified_ = u_modified; u_modified = o_modified; + enable_interrupts(); + return 1; + } diff --git a/carg_parser.c b/carg_parser.c new file mode 100644 index 0000000..6b5cf55 --- /dev/null +++ b/carg_parser.c @@ -0,0 +1,275 @@ +/* Arg_parser - A POSIX/GNU command line argument parser. C version + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include + +#include "carg_parser.h" + + +/* assure at least a minimum size for buffer `buf' */ +void * ap_resize_buffer( void *buf, const int min_size ) + { + if( buf ) buf = realloc( buf, min_size ); + else buf = malloc( min_size ); + return buf; + } + + +char push_back_record( Arg_parser * ap, const int code, const char * argument ) + { + const int len = strlen( argument ); + ap_Record *p; + void * tmp = ap_resize_buffer( ap->data, ( ap->data_size + 1 ) * sizeof( ap_Record ) ); + if( !tmp ) return 0; + ap->data = (ap_Record *)tmp; + p = &(ap->data[ap->data_size]); + p->code = code; + p->argument = 0; + tmp = ap_resize_buffer( p->argument, len + 1 ); + if( !tmp ) return 0; + p->argument = (char *)tmp; + strncpy( p->argument, argument, len + 1 ); + ++ap->data_size; + return 1; + } + + +char add_error( Arg_parser * ap, const char * msg ) + { + const int len = strlen( msg ); + void * tmp = ap_resize_buffer( ap->error, ap->error_size + len + 1 ); + if( !tmp ) return 0; + ap->error = (char *)tmp; + strncpy( ap->error + ap->error_size, msg, len + 1 ); + ap->error_size += len; + return 1; + } + + +void free_data( Arg_parser * ap ) + { + int i; + for( i = 0; i < ap->data_size; ++i ) free( ap->data[i].argument ); + if( ap->data ) { free( ap->data ); ap->data = 0; } + ap->data_size = 0; + } + + +char parse_long_option( Arg_parser * ap, + const char * const opt, const char * const arg, + const ap_Option options[], int * argindp ) + { + unsigned int len; + int index = -1; + int i; + char exact = 0, ambig = 0; + + for( len = 0; opt[len+2] && opt[len+2] != '='; ++len ) ; + + // Test all long options for either exact match or abbreviated matches. + for( i = 0; options[i].code != 0; ++i ) + if( options[i].name && !strncmp( options[i].name, &opt[2], len ) ) + { + if( strlen( options[i].name ) == len ) // Exact match found + { index = i; exact = 1; break; } + else if( index < 0 ) index = i; // First nonexact match found + else if( options[index].code != options[i].code || + options[index].has_arg != options[i].has_arg ) + ambig = 1; // Second or later nonexact match found + } + + if( ambig && !exact ) + { + add_error( ap, "option `" ); add_error( ap, opt ); + add_error( ap, "' is ambiguous" ); + return 1; + } + + if( index < 0 ) // nothing found + { + add_error( ap, "unrecognized option `" ); add_error( ap, opt ); + add_error( ap, "'" ); + return 1; + } + + ++*argindp; + + if( opt[len+2] ) // `--=' syntax + { + if( options[index].has_arg == ap_no ) + { + add_error( ap, "option `--" ); add_error( ap, options[index].name ); + add_error( ap, "' doesn't allow an argument" ); + return 1; + } + if( options[index].has_arg == ap_yes && !opt[len+3] ) + { + add_error( ap, "option `--" ); add_error( ap, options[index].name ); + add_error( ap, "' requires an argument" ); + return 1; + } + return push_back_record( ap, options[index].code, &opt[len+3] ); + } + + if( options[index].has_arg == ap_yes ) + { + if( !arg || !arg[0] ) + { + add_error( ap, "option `--" ); add_error( ap, options[index].name ); + add_error( ap, "' requires an argument" ); + return 1; + } + ++*argindp; + return push_back_record( ap, options[index].code, arg ); + } + + return push_back_record( ap, options[index].code, "" ); + } + + +char parse_short_option( Arg_parser * ap, + const char * const opt, const char * const arg, + const ap_Option options[], int * argindp ) + { + int cind = 1; // character index in opt + + while( cind > 0 ) + { + int index = -1; + int i; + const unsigned char code = opt[cind]; + const char code_str[2] = { code, 0 }; + + if( code != 0 ) + for( i = 0; options[i].code; ++i ) + if( code == options[i].code ) + { index = i; break; } + + if( index < 0 ) + { + add_error( ap, "invalid option -- " ); add_error( ap, code_str ); + return 1; + } + + if( opt[++cind] == 0 ) { ++*argindp; cind = 0; } // opt finished + + if( options[index].has_arg != ap_no && cind > 0 && opt[cind] ) + { + if( !push_back_record( ap, code, &opt[cind] ) ) return 0; + ++*argindp; cind = 0; + } + else if( options[index].has_arg == ap_yes ) + { + if( !arg || !arg[0] ) + { + add_error( ap, "option requires an argument -- " ); + add_error( ap, code_str ); + return 1; + } + ++*argindp; cind = 0; + if( !push_back_record( ap, code, arg ) ) return 0; + } + else if( !push_back_record( ap, code, "" ) ) return 0; + } + return 1; + } + + +char ap_init( Arg_parser * ap, const int argc, const char * const argv[], + const ap_Option options[], const char in_order ) + { + const char ** non_options = 0; // skipped non-options + int non_options_size = 0; // number of skipped non-options + int argind = 1; // index in argv + int i; + + ap->data = 0; + ap->error = 0; + ap->data_size = 0; + ap->error_size = 0; + if( argc < 2 || !argv || !options ) return 1; + + while( argind < argc ) + { + const unsigned char ch1 = argv[argind][0]; + const unsigned char ch2 = ( ch1 ? argv[argind][1] : 0 ); + + if( ch1 == '-' && ch2 ) // we found an option + { + const char * const opt = argv[argind]; + const char * const arg = (argind + 1 < argc) ? argv[argind+1] : 0; + if( ch2 == '-' ) + { + if( !argv[argind][2] ) { ++argind; break; } // we found "--" + else if( !parse_long_option( ap, opt, arg, options, &argind ) ) return 0; + } + else if( !parse_short_option( ap, opt, arg, options, &argind ) ) return 0; + if( ap->error ) break; + } + else + { + if( !in_order ) + { + void * tmp = ap_resize_buffer( non_options, + ( non_options_size + 1 ) * sizeof( *non_options ) ); + if( !tmp ) return 0; + non_options = (const char **)tmp; + non_options[non_options_size++] = argv[argind++]; + } + else if( !push_back_record( ap, 0, argv[argind++] ) ) return 0; + } + } + if( ap->error ) free_data( ap ); + else + { + for( i = 0; i < non_options_size; ++i ) + if( !push_back_record( ap, 0, non_options[i] ) ) return 0; + while( argind < argc ) + if( !push_back_record( ap, 0, argv[argind++] ) ) return 0; + } + if( non_options ) free( non_options ); + return 1; + } + + +void ap_free( Arg_parser * ap ) + { + free_data( ap ); + if( ap->error ) { free( ap->error ); ap->error = 0; } + ap->error_size = 0; + } + + +const char * ap_error( const Arg_parser * ap ) { return ap->error; } + + +int ap_arguments( const Arg_parser * ap ) { return ap->data_size; } + + +int ap_code( const Arg_parser * ap, const int i ) + { + if( i >= 0 && i < ap_arguments( ap ) ) return ap->data[i].code; + else return 0; + } + + +const char * ap_argument( const Arg_parser * ap, const int i ) + { + if( i >= 0 && i < ap_arguments( ap ) ) return ap->data[i].argument; + else return ""; + } diff --git a/carg_parser.h b/carg_parser.h new file mode 100644 index 0000000..d343c3c --- /dev/null +++ b/carg_parser.h @@ -0,0 +1,85 @@ +/* Arg_parser - A POSIX/GNU command line argument parser. C version + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* Arg_parser reads the arguments in `argv' and creates a number of + option codes, option arguments and non-option arguments. + + In case of error, `ap_error' returns a non-null pointer to an error + message. + + `options' is an array of `struct ap_Option' terminated by an element + containing a code which is zero. A null name means a short-only + option. A code value outside the unsigned char range means a + long-only option. + + Arg_parser normally makes it appear as if all the option arguments + were specified before all the non-option arguments for the purposes + of parsing, even if the user of your program intermixed option and + non-option arguments. If you want the arguments in the exact order + the user typed them, call `ap_init' with `in_order' = true. + + The argument `--' terminates all options; any following arguments are + treated as non-option arguments, even if they begin with a hyphen. + + The syntax for optional option arguments is `-' + (without whitespace), or `--='. +*/ + +typedef enum { ap_no, ap_yes, ap_maybe } ap_Has_arg; + +typedef struct + { + int code; // Short option letter or code ( code != 0 ) + const char * name; // Long option name (maybe null) + ap_Has_arg has_arg; + } +ap_Option; + + +typedef struct + { + int code; + char * argument; + } +ap_Record; + + +typedef struct + { + ap_Record * data; + char * error; + int data_size; + int error_size; + } +Arg_parser; + + +char ap_init( Arg_parser * ap, const int argc, const char * const argv[], + const ap_Option options[], const char in_order ); + +void ap_free( Arg_parser * ap ); + +const char * ap_error( const Arg_parser * ap ); + + // The number of arguments parsed (may be different from argc) +int ap_arguments( const Arg_parser * ap ); + + // If ap_code( i ) is 0, ap_argument( i ) is a non-option. + // Else ap_argument( i ) is the option's argument (or empty). +int ap_code( const Arg_parser * ap, const int i ); + +const char * ap_argument( const Arg_parser * ap, const int i ); diff --git a/configure b/configure new file mode 100755 index 0000000..b9d4d3f --- /dev/null +++ b/configure @@ -0,0 +1,220 @@ +#! /bin/sh +# configure script for GNU ed - The GNU line editor +# Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. +# +# This configure script is free software: you have unlimited permission +# to copy, distribute and modify it. +# +# Date of this version: 2009-07-10 + +invocation_name=$0 +args= +no_create= +progname=ed +progversion=1.4 +srctrigger=ed.h + +# clear some things potentially inherited from environment. +LC_ALL=C +export LC_ALL +srcdir= +prefix=/usr/local +exec_prefix='$(prefix)' +bindir='$(exec_prefix)/bin' +datadir='$(prefix)/share' +infodir='$(datadir)/info' +mandir='$(datadir)/man' +sysconfdir='$(prefix)/etc' +program_prefix= +CC= +CXX= +CPPFLAGS= +CFLAGS='-Wall -W -O2' +CXXFLAGS='-Wall -W -O2' +LDFLAGS= + +# Loop over all args +while [ x"$1" != x ] ; do + + # Get the first arg, and shuffle + option=$1 + shift + + # Add the argument quoted to args + args="${args} \"${option}\"" + + # Split out the argument for options that take them + case ${option} in + *=*) optarg=`echo ${option} | sed -e 's,^[^=]*=,,'` ;; + esac + + # Process the options + case ${option} in + --help | --he* | -h) + echo "Usage: configure [options]" + echo + echo "Options: [defaults in brackets]" + echo " -h, --help display this help and exit" + echo " -V, --version output version information and exit" + echo " --srcdir=DIR find the sources in DIR [. or ..]" + echo " --prefix=DIR install into DIR [${prefix}]" + echo " --exec-prefix=DIR base directory for arch-dependent files [${exec_prefix}]" + echo " --bindir=DIR user executables directory [${bindir}]" + echo " --datadir=DIR base directory for doc and data [${datadir}]" + echo " --infodir=DIR info files directory [${infodir}]" + echo " --mandir=DIR man pages directory [${mandir}]" + echo " --sysconfdir=DIR read-only single-machine data directory [${sysconfdir}]" + echo " --program-prefix=NAME install program and documentation prefixed with NAME" + echo " CC=COMPILER C compiler to use [gcc]" + echo " CXX=COMPILER C++ compiler to use [g++]" + echo " CPPFLAGS=OPTIONS command line options for the preprocessor [${CPPFLAGS}]" + echo " CFLAGS=OPTIONS command line options for the C compiler [${CFLAGS}]" + echo " CXXFLAGS=OPTIONS command line options for the C++ compiler [${CXXFLAGS}]" + echo " LDFLAGS=OPTIONS command line options for the linker [${LDFLAGS}]" + echo + exit 0 ;; + --version | --ve* | -V) + echo "Configure script for GNU ${progname} version ${progversion}" + exit 0 ;; + --srcdir* | --sr*) + srcdir=`echo ${optarg} | sed -e 's,/$,,'` ;; + --prefix* | --pre*) + prefix=`echo ${optarg} | sed -e 's,/$,,'` ;; + --exec-prefix* | --ex*) + exec_prefix=`echo ${optarg} | sed -e 's,/$,,'` ;; + --bindir* | --bi*) + bindir=`echo ${optarg} | sed -e 's,/$,,'` ;; + --datadir* | --da*) + datadir=`echo ${optarg} | sed -e 's,/$,,'` ;; + --infodir* | --in*) + infodir=`echo ${optarg} | sed -e 's,/$,,'` ;; + --mandir* | --ma*) + mandir=`echo ${optarg} | sed -e 's,/$,,'` ;; + --sysconfdir* | --sy*) + sysconfdir=`echo ${optarg} | sed -e 's,/$,,'` ;; + --program-prefix* | --pro*) + program_prefix=`echo ${optarg} | sed -e 's,/$,,'` ;; + --no-create | --no-c*) + no_create=yes ;; + + CC=*) CC=${optarg} ;; + CXX=*) CXX=${optarg} ;; + CPPFLAGS=*) CPPFLAGS=${optarg} ;; + CFLAGS=*) CFLAGS=${optarg} ;; + CXXFLAGS=*) CXXFLAGS=${optarg} ;; + LDFLAGS=*) LDFLAGS=${optarg} ;; + + --* | *=* | *-*-*) ;; + *) + echo "configure: Unrecognized option: \"${option}\"; use --help for usage." 1>&2 + exit 1 ;; + esac +done + +# Find the source files, if location was not specified. +srcdirtext= +if [ x"${srcdir}" = x ] ; then + srcdirtext="or . or .." ; srcdir=. + if [ ! -r ${srcdir}/${srctrigger} ] ; then srcdir=.. ; fi + if [ ! -r ${srcdir}/${srctrigger} ] ; then + ## the sed command below emulates the dirname command + srcdir=`echo ${invocation_name} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + fi +fi + +if [ ! -r ${srcdir}/${srctrigger} ] ; then + exec 1>&2 + echo + echo "configure: Can't find sources in ${srcdir} ${srcdirtext}" + echo "configure: (At least ${srctrigger} is missing)." + exit 1 +fi + +# Set srcdir to . if that's what it is. +if [ "`pwd`" = "`cd ${srcdir} ; pwd`" ] ; then srcdir=. ; fi + +# checking whether we are using GNU C. +if [ x"${CC}" = x ] ; then # Let the user override the test. + if [ -x /bin/gcc ] || + [ -x /usr/bin/gcc ] || + [ -x /usr/local/bin/gcc ] ; then + CC="gcc" + else + CC="cc" + fi +fi + +# checking whether we are using GNU C++. +if [ x"${CXX}" = x ] ; then # Let the user override the test. + if [ -x /bin/g++ ] || + [ -x /usr/bin/g++ ] || + [ -x /usr/local/bin/g++ ] ; then + CXX="g++" + else + CXX="c++" + fi +fi + +echo +if [ x${no_create} = x ] ; then + echo "creating config.status" + rm -f config.status + cat > config.status << EOF +#! /bin/sh +# This file was generated automatically by configure. Do not edit. +# Run this file to recreate the current configuration. +# +# This script is free software: you have unlimited permission +# to copy, distribute and modify it. + +exec /bin/sh ${invocation_name} ${args} --no-create +EOF + chmod +x config.status +fi + +echo "creating Makefile" +echo "VPATH = ${srcdir}" +echo "prefix = ${prefix}" +echo "exec_prefix = ${exec_prefix}" +echo "bindir = ${bindir}" +echo "datadir = ${datadir}" +echo "infodir = ${infodir}" +echo "mandir = ${mandir}" +echo "sysconfdir = ${sysconfdir}" +echo "program_prefix = ${program_prefix}" +echo "CC = ${CC}" +echo "CXX = ${CXX}" +echo "CPPFLAGS = ${CPPFLAGS}" +echo "CFLAGS = ${CFLAGS}" +echo "CXXFLAGS = ${CXXFLAGS}" +echo "LDFLAGS = ${LDFLAGS}" +rm -f Makefile +cat > Makefile << EOF +# Makefile for GNU ed - The GNU line editor +# Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. +# This file was generated automatically by configure. Do not edit. +# +# This Makefile is free software: you have unlimited permission +# to copy, distribute and modify it. + +progname = ${progname} +progversion = ${progversion} +VPATH = ${srcdir} +prefix = ${prefix} +exec_prefix = ${exec_prefix} +bindir = ${bindir} +datadir = ${datadir} +infodir = ${infodir} +mandir = ${mandir} +sysconfdir = ${sysconfdir} +program_prefix = ${program_prefix} +CC = ${CC} +CXX = ${CXX} +CPPFLAGS = ${CPPFLAGS} +CFLAGS = ${CFLAGS} +CXXFLAGS = ${CXXFLAGS} +LDFLAGS = ${LDFLAGS} +EOF +cat ${srcdir}/Makefile.in >> Makefile + +echo "OK. Now you can run make." diff --git a/doc/ed.1 b/doc/ed.1 new file mode 100644 index 0000000..4a3e81e --- /dev/null +++ b/doc/ed.1 @@ -0,0 +1,1045 @@ +.TH ED 1 "13 June 2009" +.SH NAME +ed, red \- text editor +.SH SYNOPSIS +ed [-GVhs] [-p \fIstring\fR] [\fIfile\fR] +.LP +red [-GVhs] [-p \fIstring\fR] [\fIfile\fR] +.SH DESCRIPTION +.B ed +is a line-oriented text editor. +It is used to create, display, modify and otherwise manipulate text +files. +.B red +is a restricted +.BR ed : +it can only edit files in the current +directory and cannot execute shell commands. + +If invoked with a +.I file +argument, then a copy of +.I file +is read into the editor's buffer. +Changes are made to this copy and not directly to +.I file +itself. +Upon quitting +.BR ed , +any changes not explicitly saved with a +.I `w' +command are lost. + +Editing is done in two distinct modes: +.I command +and +.IR input . +When first invoked, +.B ed +is in command mode. +In this mode commands are read from the standard input and +executed to manipulate the contents of the editor buffer. +A typical command might look like: +.sp +.RS +,s/\fIold\fR/\fInew\fR/g +.RE +.sp +which replaces all occurrences of the string +.I old +with +.IR new . + +When an input command, such as +.I `a' +(append), +.I `i' +(insert) or +.I `c' +(change), is given, +.B ed +enters input mode. This is the primary means +of adding text to a file. +In this mode, no commands are available; +instead, the standard input is written +directly to the editor buffer. Lines consist of text up to and +including a +.IR newline +character. +Input mode is terminated by +entering a single period (\fI.\fR) on a line. + +All +.B ed +commands operate on whole lines or ranges of lines; e.g., +the +.I `d' +command deletes lines; the +.I `m' +command moves lines, and so on. +It is possible to modify only a portion of a line by means of replacement, +as in the example above. However even here, the +.I `s' +command is applied to whole lines at a time. + +In general, +.B ed +commands consist of zero or more line addresses, followed by a single +character command and possibly additional parameters; i.e., +commands have the structure: +.sp +.RS +.I [address [,address]]command[parameters] +.RE +.sp +The address(es) indicate the line or range of lines to be affected by the +command. If fewer addresses are given than the command accepts, then +default addresses are supplied. + +.SS OPTIONS +.TP 8 +-G +Forces backwards compatibility. Affects the commands +.IR `G' , +.IR `V' , +.IR `f' , +.IR `l' , +.IR `m' , +.IR `t' , +and +.IR `!!' . +.TP 8 +-s +Suppresses diagnostics. This should be used if +.BR ed 's +standard input is from a script. + +.TP 8 +.RI \-p \ string +Specifies a command prompt. This may be toggled on and off with the +.I `P' +command. + +.TP 8 +.I file +Specifies the name of a file to read. If +.I file +is prefixed with a +bang (!), then it is interpreted as a shell command. In this case, +what is read is +the standard output of +.I file +executed via +.IR sh (1). +To read a file whose name begins with a bang, prefix the +name with a backslash (\e). +The default filename is set to +.I file +only if it is not prefixed with a bang. + +.SS LINE ADDRESSING +An address represents the number of a line in the buffer. +.B ed +maintains a +.I current address +which is +typically supplied to commands as the default address when none is specified. +When a file is first read, the current address is set to the last line +of the file. In general, the current address is set to the last line +affected by a command. + +A line address is +constructed from one of the bases in the list below, optionally followed +by a numeric offset. The offset may include any combination +of digits, operators (i.e. +.IR + +and +.IR - ) +and whitespace. +Addresses are read from left to right, and their values are computed +relative to the current address. + +One exception to the rule that addresses represent line numbers is the +address +.I 0 +(zero). +This means "before the first line," +and is legal wherever it makes sense. + +An address range is two addresses separated either by a comma or +semicolon. The value of the first address in a range cannot exceed the +value of the second. If only one address is given in a range, then +the second address is set to the given address. If an +.IR n- tuple +of addresses is given where +.I n > 2, +then the corresponding range is determined by the last two addresses in +the +.IR n- tuple. +If only one address is expected, then the last address is used. + +Each address in a comma-delimited range is interpreted relative to the +current address. In a semicolon-delimited range, the first address is +used to set the current address, and the second address is interpreted +relative to the first. + + +The following address symbols are recognized. + +.TP 8 +\&. +The current line (address) in the buffer. + +.TP 8 +$ +The last line in the buffer. + +.TP 8 +.I n +The +.IR n th, +line in the buffer +where +.I n +is a number in the range +.IR [0,$] . + +.TP 8 +- +The previous line. +This is equivalent to +.I -1 +and may be repeated with cumulative effect. + +.TP 8 +^\fIn\fR +The +.IR n th +previous line, where +.I n +is a non-negative number. + +.TP 8 ++ +The +next line. +This is equivalent to +.I +1 +and may be repeated with cumulative effect. + +.HP +.I whitespace n +.TP 8 ++\fIn\fR +The +.IR n th +next line, where +.I n +is a non-negative number. +.I Whitespace +followed by a number +.I n +is interpreted as +.IR +n . + +.TP 8 +, +The first through last lines in the buffer. This is equivalent to +the address range +.IR 1,$ . + +.TP 8 +; +The current through last lines in the buffer. This is equivalent to +the address range +.IR .,$ . + +.TP 8 +.RI / re / +The +next line containing the regular expression +.IR re . +The search wraps to the beginning of the buffer and continues down to the +current line, if necessary. +// repeats the last search. + +.TP 8 +.RI ? re ? +The +previous line containing the regular expression +.IR re . +The search wraps to the end of the buffer and continues up to the +current line, if necessary. +?? repeats the last search. + +.TP 8 +.RI ' lc +The +line previously marked by a +.I `k' +(mark) command, where +.I lc +is a lower case letter. + +.SS REGULAR EXPRESSIONS +Regular expressions are patterns used in selecting text. +For example, the +.B ed +command +.sp +.RS +g/\fIstring\fR/ +.RE +.sp +prints all lines containing +.IR string . +Regular expressions are also +used by the +.I `s' +command for selecting old text to be replaced with new. + +In addition to a specifying string literals, regular expressions can +represent +classes of strings. Strings thus represented are said to be matched +by the corresponding regular expression. +If it is possible for a regular expression +to match several strings in a line, then the left-most longest match is +the one selected. + +The following symbols are used in constructing regular expressions: + +.TP 8 +c +Any character +.I c +not listed below, including `{', '}', `(', `)', `<' and `>', +matches itself. + +.TP 8 +\e\fIc\fR +A backslash-escaped character +.IR c +other than `{', '}', `(', `)', `<', `>', +`b', 'B', `w', `W', `+', and `?' +matches itself. + +.TP 8 +\&. +Matches any single character. + +.TP 8 +.I [char-class] +Matches any single character in +.IR char-class . +To include a `]' +in +.IR char-class , +it must be the first character. +A range of characters may be specified by separating the end characters +of the range with a `-', e.g., `a-z' specifies the lower case characters. +The following literal expressions can also be used in +.I char-class +to specify sets of characters: +.sp +.nf +\ \ [:alnum:]\ \ [:cntrl:]\ \ [:lower:]\ \ [:space:] +.PD 0 +\ \ [:alpha:]\ \ [:digit:]\ \ [:print:]\ \ [:upper:] +.PD 0 +\ \ [:blank:]\ \ [:graph:]\ \ [:punct:]\ \ [:xdigit:] +.fi +.sp +If `-' appears as the first or last +character of +.IR char-class , +then it matches itself. +All other characters in +.I char-class +match themselves. +.sp +Patterns in +.I char-class +of the form: +.sp +\ \ [.\fIcol-elm\fR.] or, +.PD 0 +\ \ [=\fIcol-elm\fR=] +.sp +where +.I col-elm +is a +.I collating element +are interpreted according to +.IR locale (5) +(not currently supported). +See +.IR regex (3) +for an explanation of these constructs. + +.TP 8 +[^\fIchar-class\fR] +Matches any single character, other than newline, not in +.IR char-class . +.IR char-class +is defined +as above. + +.TP 8 +^ +If `^' is the first character of a regular expression, then it +anchors the regular expression to the beginning of a line. +Otherwise, it matches itself. + +.TP 8 +$ +If `$' is the last character of a regular expression, it +anchors the regular expression to the end of a line. +Otherwise, it matches itself. + +.TP 8 +\e(\fIre\fR\e) +Defines a (possibly null) subexpression +.IR re . +Subexpressions may be nested. +A subsequent backreference of the form `\e\fIn\fR', where +.I n +is a number in the range [1,9], expands to the text matched by the +.IR n th +subexpression. +For example, the regular expression `\e(a.c\e)\e1' matches the +string `abcabc', but not `abcadc'. +Subexpressions are ordered relative to +their left delimiter. + +.TP 8 +* +Matches the single character regular expression or subexpression +immediately preceding it zero or more times. If '*' is the first +character of a regular expression or subexpression, then it matches +itself. The `*' operator sometimes yields unexpected results. +For example, the regular expression `b*' matches the beginning of +the string `abbb', as opposed to the substring `bbb', since a null match +is the only left-most match. + +.HP +\fR\e{\fIn,m\fR\e}\fR +.HP +\fR\e{\fIn,\fR\e}\fR +.TP 8 +\fR\e{\fIn\fR\e}\fR +Matches the single character regular expression or subexpression +immediately preceding it at least +.I n +and at most +.I m +times. +If +.I m +is omitted, then it matches at least +.I n +times. +If the comma is also omitted, then it matches exactly +.I n +times. If any of these forms occurs first in a regular expression or +subexpression, then it is interpreted literally (i.e., the regular +expression `\e{2\e}' matches the string `{2}', and so on). + +.HP +\e< +.TP 8 +\fR\e>\fR +Anchors the single character regular expression or subexpression +immediately following it to the beginning (\e<) or ending +(\e>) of a \fIword\fR, i.e., in ASCII, a maximal string of alphanumeric +characters, including the underscore (_). + + +.LP +The following extended operators are preceded by a backslash (\e) to +distinguish them from traditional +.B ed +syntax. + +.HP +\fR\e\`\fR +.TP 8 +\fR\e\'\fR +Unconditionally matches the beginning (\e\`) or ending (\e\') of a line. + +.TP 8 +\fR\e?\fR +Optionally matches the single character regular expression or subexpression +immediately preceding it. For example, the regular expression `a[bd]\e?c' +matches the strings `abc', `adc' and `ac'. If \e? occurs at the beginning +of a regular expressions or subexpression, then it matches a literal `?'. + +.TP 8 +\fR\e+\fR +Matches the single character regular expression or subexpression +immediately preceding it one or more times. So the regular expression +`a\e+' is shorthand for `aa*'. If \e+ occurs at the beginning of a +regular expression or subexpression, then it matches a literal `+'. + + +.TP 8 +\fR\eb\fR +Matches the beginning or ending (null string) of a word. Thus the regular +expression `\ebhello\eb' is equivalent to `\e'. However, `\eb\eb' +is a valid regular expression whereas `\e<\e>' is not. + +.TP 8 +\fR\eB\fR +Matches (a null string) inside a word. + +.TP 8 +\fR\ew\fR +Matches any character in a word. + +.TP 8 +\fR\eW\fR +Matches any character not in a word. + +.SS COMMANDS +All +.B ed +commands are single characters, though some require additional parameters. +If a command's parameters extend over several lines, then +each line except for the last +must be terminated with a backslash (\e). + +In general, at most one command is allowed per line. +However, most commands accept a print suffix, which is any of +.I `p' +(print), +.I `l' +(list) , +or +.I `n' +(enumerate), +to print the last line affected by the command. + +An interrupt (typically ^C) has the effect of aborting the current command +and returning the editor to command mode. + +.B ed +recognizes the following commands. The commands are shown together with +the default address or address range supplied if none is +specified (in parenthesis). + +.TP 8 +(.)a +Appends text to the buffer after the addressed line, which may be the +address 0 (zero). Text is entered in input mode. The current address is +set to last line entered. + +.TP 8 +(.,.)c +Changes lines in the buffer. The addressed lines are deleted +from the buffer, and text is appended in their place. +Text is entered in input mode. +The current address is set to last line entered. + +.TP 8 +(.,.)d +Deletes the addressed lines from the buffer. +If there is a line after the deleted range, then the current address is set +to this line. Otherwise the current address is set to the line +before the deleted range. + +.TP 8 +.RI e \ file +Edits +.IR file , +and sets the default filename. +If +.I file +is not specified, then the default filename is used. +Any lines in the buffer are deleted before +the new file is read. +The current address is set to the last line read. + +.TP 8 +e !\fIcommand\fR +Edits the standard output of +.IR `!command' , +(see +.RI ! command +below). +The default filename is unchanged. +Any lines in the buffer are deleted before the output of +.I command +is read. +The current address is set to the last line read. + +.TP 8 +.RI E \ file +Edits +.I file +unconditionally. +This is similar to the +.I e +command, +except that unwritten changes are discarded without warning. +The current address is set to the last line read. + +.TP 8 +.RI f \ file +Sets the default filename to +.IR file . +If +.I file +is not specified, then the default unescaped filename is printed. + +.TP 8 +.RI (1,$)g /re/command-list +Applies +.I command-list +to each of the addressed lines matching a regular expression +.IR re . +The current address is set to the +line currently matched before +.I command-list +is executed. +At the end of the +.I `g' +command, the current address is set to the last line affected by +.IR command-list . + +Each command in +.I command-list +must be on a separate line, +and every line except for the last must be terminated by a backslash +(\e). +Any commands are allowed, except for +.IR `g' , +.IR `G' , +.IR `v' , +and +.IR `V' . +A newline alone in +.I command-list +is equivalent to a +.I `p' +command. + +.TP 8 +.RI (1,$)G /re/ +Interactively edits the addressed lines matching a regular expression +.IR re. +For each matching line, +the line is printed, +the current address is set, +and the user is prompted to enter a +.IR command-list . +At the end of the +.I `G' +command, the current address +is set to the last line affected by (the last) +.IR command-list . + +The format of +.I command-list +is the same as that of the +.I `g' +command. A newline alone acts as a null command list. +A single `&' repeats the last non-null command list. + +.TP 8 +H +Toggles the printing of error explanations. +By default, explanations are not printed. +It is recommended that ed scripts begin with this command to +aid in debugging. + +.TP 8 +h +Prints an explanation of the last error. + +.TP 8 +(.)i +Inserts text in the buffer before the current line. +Text is entered in input mode. +The current address is set to the last line entered. + +.TP 8 +(.,.+1)j +Joins the addressed lines. The addressed lines are +deleted from the buffer and replaced by a single +line containing their joined text. +The current address is set to the resultant line. + +.TP 8 +.RI (.)k lc +Marks a line with a lower case letter +.IR lc . +The line can then be addressed as +.I 'lc +(i.e., a single quote followed by +.I lc +) in subsequent commands. The mark is not cleared until the line is +deleted or otherwise modified. + +.TP 8 +(.,.)l +Prints the addressed lines unambiguously. If invoked from a terminal, +.B ed +pauses at the end of each page until a newline is entered. +The current address is set to the last line printed. + +.TP 8 +(.,.)m(.) +Moves lines in the buffer. The addressed lines are moved to after the +right-hand destination address, which may be the address +.IR 0 +(zero). +The current address is set to the new address of the last line moved. + +.TP 8 +(.,.)n +Prints the addressed lines along with +their line numbers. The current address is set to the last line +printed. + +.TP 8 +(.,.)p +Prints the addressed lines. If invoked from a terminal, +.B ed +pauses at the end of each page until a newline is entered. +The current address is set to the last line +printed. + +.TP 8 +P +Toggles the command prompt on and off. +Unless a prompt was specified by with command-line option +\fI-p string\fR, the command prompt is by default turned off. + +.TP 8 +q +Quits ed. + +.TP 8 +Q +Quits ed unconditionally. +This is similar to the +.I q +command, +except that unwritten changes are discarded without warning. + +.TP 8 +.RI ($)r \ file +Reads +.I file +to after the addressed line. If +.I file +is not specified, then the default +filename is used. If there was no default filename prior to the command, +then the default filename is set to +.IR file . +Otherwise, the default filename is unchanged. +The current address is set to the last line read. + +.TP 8 +($)r !\fIcommand\fR +Reads +to after the addressed line +the standard output of +.IR `!command' , +(see the +.RI ! command +below). +The default filename is unchanged. +The current address is set to the last line read. + +.HP +.RI (.,.)s /re/replacement/ +.HP +.RI (.,.)s /re/replacement/\fRg\fR +.HP +.RI (.,.)s /re/replacement/n +.br +Replaces text in the addressed lines +matching a regular expression +.I re +with +.IR replacement . +By default, only the first match in each line is replaced. +If the +.I `g' +(global) suffix is given, then every match to be replaced. +The +.I `n' +suffix, where +.I n +is a positive number, causes only the +.IR n th +match to be replaced. +It is an error if no substitutions are performed on any of the addressed +lines. +The current address is set to the last line affected. + +.I re +and +.I replacement +may be delimited by any character other than space, newline and the +characters used by the form of the +.I `s' +command shown below. +If one or two of the last delimiters is omitted, then the last line +affected is printed as though the print suffix +.I `p' +were specified. + + +An unescaped `&' in +.I replacement +is replaced by the currently matched text. +The character sequence +\fI`\em'\fR, +where +.I m +is a number in the range [1,9], is replaced by the +.IR m th +backreference expression of the matched text. +If +.I replacement +consists of a single `%', then +.I replacement +from the last substitution is used. +Newlines may be embedded in +.I replacement +if they are escaped with a backslash (\e). + +.TP 8 +(.,.)s +Repeats the last substitution. +This form of the +.I `s' +command accepts a count suffix +.IR `n' , +and any combination of the characters +.IR `r' , +.IR `g' , +and +.IR `p' . +If a count suffix +.I `n' +is given, then only the +.IR n th +match is replaced. +The +.I `r' +suffix causes +the regular expression of the last search to be used instead of the +that of the last substitution. +The +.I `g' +suffix toggles the global suffix of the last substitution. +The +.I `p' +suffix toggles the print suffix of the last substitution. +The current address is set to the last line affected. + +.TP 8 +(.,.)t(.) +Copies (i.e., transfers) the addressed lines to after the right-hand +destination address, which may be the address +.IR 0 +(zero). +The current address is set to the last line +copied. + +.TP 8 +u +Undoes the last command and restores the current address +to what it was before the command. +The global commands +.IR `g' , +.IR `G' , +.IR `v' , +and +.IR `V' . +are treated as a single command by undo. +.I `u' +is its own inverse. + +.TP 8 +.RI (1,$)v /re/command-list +Applies +.I command-list +to each of the addressed lines not matching a regular expression +.IR re . +This is similar to the +.I `g' +command. + +.TP 8 +.RI (1,$)V /re/ +Interactively edits the addressed lines not matching a regular expression +.IR re. +This is similar to the +.I `G' +command. + +.TP 8 +.RI (1,$)w \ file +Writes the addressed lines to +.IR file . +Any previous contents of +.I file +is lost without warning. +If there is no default filename, then the default filename is set to +.IR file, +otherwise it is unchanged. If no filename is specified, then the default +filename is used. +The current address is unchanged. + +.TP 8 +.RI (1,$)wq \ file +Writes the addressed lines to +.IR file , +and then executes a +.I `q' +command. + +.TP 8 +(1,$)w !\fIcommand\fR +Writes the addressed lines to the standard input of +.IR `!command' , +(see the +.RI ! command +below). +The default filename and current address are unchanged. + +.TP 8 +.RI (1,$)W \ file +Appends the addressed lines to the end of +.IR file . +This is similar to the +.I `w' +command, expect that the previous contents of file is not clobbered. +The current address is unchanged. + +.TP 8 +(.)x +Copies (puts) the contents of the cut buffer to after the addressed line. +The current address is set to the last line copied. + +.TP 8 +(.,.)y +Copies (yanks) the addressed lines to the cut buffer. +The cut buffer is overwritten by subsequent +.IR `y' , +.IR `s' , +.IR `j' , +.IR `d' , +or +.I `c' +commands. +The current address is unchanged. + +.TP 8 +.RI (.+1)z n +Scrolls +.I n +lines at a time starting at addressed line. If +.I n +is not specified, then the current window size is used. +The current address is set to the last line printed. + +.TP 8 +.RI ! command +Executes +.I command +via +.IR sh (1). +If the first character of +.I command +is `!', then it is replaced by text of the +previous +.IR `!command' . +.B ed +does not process +.I command +for backslash (\e) escapes. +However, an unescaped +.I `%' +is replaced by the default filename. +When the shell returns from execution, a `!' +is printed to the standard output. +The current line is unchanged. + +.TP 8 +(.,.)# +Begins a comment; the rest of the line, up to a newline, is ignored. +If a line address followed by a semicolon is given, then the +current address is set to that address. Otherwise, the current address +is unchanged. + +.TP 8 +($)= +Prints the line number of the addressed line. + +.TP 8 +(.+1)newline +Prints the addressed line, and sets the current address to +that line. + +.SH FILES +.TP 8 +ed.hup +The file to which +.B ed +attempts to write the buffer if the terminal hangs up. + +.SH SEE ALSO + +.IR vi (1), +.IR sed (1), +.IR regex (3), +.IR sh (1). + +USD:12-13 + +B. W. Kernighan and P. J. Plauger, +.I Software Tools in Pascal , +Addison-Wesley, 1981. + +.SH LIMITATIONS +.B ed +processes +.I file +arguments for backslash escapes, i.e., in a filename, +any characters preceded by a backslash (\e) are +interpreted literally. + +If a text (non-binary) file is not terminated by a newline character, +then +.B ed +appends one on reading/writing it. In the case of a binary file, +.B ed +does not append a newline on reading/writing. + +per line overhead: 4 ints + +.SH DIAGNOSTICS +When an error occurs, +if +.BR ed 's +input is from a regular file or here document, then it +exits, otherwise it +prints a `?' and returns to command mode. +An explanation of the last error can be +printed with the +.I `h' +(help) command. + +Attempting to quit +.B ed +or edit another file before writing a modified buffer +results in an error. +If the command is entered a second time, it succeeds, +but any changes to the buffer are lost. + +.B ed +exits with 0 if no errors occurred; otherwise >0. diff --git a/doc/ed.info b/doc/ed.info new file mode 100644 index 0000000..de0f728 --- /dev/null +++ b/doc/ed.info @@ -0,0 +1,1417 @@ +This is ed.info, produced by makeinfo version 4.13 from ed.texinfo. + +INFO-DIR-SECTION Basics +START-INFO-DIR-ENTRY +* Ed: (ed). The GNU line editor +END-INFO-DIR-ENTRY + + Copyright (C) 1993, 2006, 2007, 2008, 2009 Free Software Foundation, +Inc. + + Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. + + +File: ed.info, Node: Top, Next: Overview, Up: (dir) + +The GNU ed line editor +********************** + +This manual is for GNU ed (version 1.4, 10 July 2009). + + + GNU ed is an 8-bit clean, more or less POSIX-compliant +implementation of the standard Unix line editor. These days, +full-screen editors have rendered `ed' mostly of historical interest. +Nonetheless, it appeals to a handful of aging programmers who still +believe that "Small is Beautiful". + +* Menu: + +* Overview:: Overview of the `ed' command +* Introduction to Line Editing:: Getting started with GNU `ed' +* Invoking Ed:: Command line interface +* Line Addressing:: Specifying lines/ranges in the buffer +* Regular Expressions:: Patterns for selecting text +* Commands:: Commands recognized by GNU `ed' +* Limitations:: Intrinsic limits of GNU `ed' +* Diagnostics:: GNU `ed' error handling +* Problems:: Reporting bugs +* GNU Free Documentation License:: How you can copy and share this manual + + + Copyright (C) 1993, 2006, 2007, 2008, 2009 Free Software Foundation, +Inc. + + Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. + + +File: ed.info, Node: Overview, Next: Introduction to Line Editing, Prev: Top, Up: Top + +1 Overview +********** + +`ed' is a line-oriented text editor. It is used to create, display, +modify and otherwise manipulate text files. `red' is a restricted `ed': +it can only edit files in the current directory and cannot execute +shell commands. + + If invoked with a FILE argument, then a copy of FILE is read into +the editor's buffer. Changes are made to this copy and not directly to +FILE itself. Upon quitting `ed', any changes not explicitly saved with +a `w' command are lost. + + Editing is done in two distinct modes: "command" and "input". When +first invoked, `ed' is in command mode. In this mode commands are read +from the standard input and executed to manipulate the contents of the +editor buffer. A typical command might look like: + + ,s/OLD/NEW/g + + which replaces all occurences of the string OLD with NEW. + + When an input command, such as `a' (append), `i' (insert) or `c' +(change), is given, `ed' enters input mode. This is the primary means +of adding text to a file. In this mode, no commands are available; +instead, the standard input is written directly to the editor buffer. A +"line" consists of the text up to and including a character. +Input mode is terminated by entering a single period (`.') on a line. + + All `ed' commands operate on whole lines or ranges of lines; e.g., +the `d' command deletes lines; the `m' command moves lines, and so on. +It is possible to modify only a portion of a line by means of +replacement, as in the example above. However even here, the `s' +command is applied to whole lines at a time. + + In general, `ed' commands consist of zero or more line addresses, +followed by a single character command and possibly additional +parameters; i.e., commands have the structure: + + [ADDRESS [,ADDRESS]]COMMAND[PARAMETERS] + + The ADDRESSes indicate the line or range of lines to be affected by +the command. If fewer addresses are given than the command accepts, +then default addresses are supplied. + + +File: ed.info, Node: Introduction to Line Editing, Next: Invoking Ed, Prev: Overview, Up: Top + +2 Introduction to Line Editing +****************************** + +`ed' was created, along with the Unix operating system, by Ken Thompson +and Dennis Ritchie. It is the refinement of its more complex, +programmable predecessor, `QED', to which Thompson and Ritchie had +already added pattern matching capabilities (*note Regular +Expressions::). + + For the purposes of this tutorial, a working knowledge of the Unix +shell `sh' (*note Bash: (bash)Bash.) and the Unix file system is +recommended, since `ed' is designed to interact closely with them. + + The principal difference between line editors and display editors is +that display editors provide instant feedback to user commands, whereas +line editors require sometimes lengthy input before any effects are +seen. The advantage of instant feedback, of course, is that if a mistake +is made, it can be corrected immediately, before more damage is done. +Editing in `ed' requires more strategy and forethought; but if you are +up to the task, it can be quite efficient. + + Much of the `ed' command syntax is shared with other Unix utilities. + + As with the shell, (the carriage-return key) enters a line +of input. So when we speak of "entering" a command or some text in +`ed', is implied at the end of each line. Prior to typing +, corrections to the line may be made by typing either + (sometimes labeled or ) to erase characters +backwards, or -u (i.e., hold the CONTROL key and type u) to +erase the whole line. + + When `ed' first opens, it expects to be told what to do but doesn't +prompt us like the shell. So let's begin by telling `ed' to do so with +the

("prompt") command: + + $ ed + P + * + + By default, `ed' uses asterisk (`*') as command prompt to avoid +confusion with the shell command prompt (`$'). + + We can run Unix shell (`sh') commands from inside `ed' by prefixing +them with (exclamation mark, aka "bang"). For example: + + *!date + Mon Jun 26 10:08:41 PDT 2006 + ! + *!for s in hello world; do echo $s; done + hello + world + ! + * + + So far, this is no different from running commands in the Unix shell. +But let's say we want to edit the output of a command, or save it to a +file. First we must capture the command output to a temporary location +called a "buffer" where `ed' can access it. This is done with `ed''s + command (mnemonic: "read"): + + *r !cal + 143 + * + + Here `ed' is telling us that it has just read 143 characters into +the editor buffer - i.e., the output of the `cal' command, which prints +a simple ASCII calendar. To display the buffer contents we issue the +

("print") command (not to be confused with the prompt command, +which is uppercase!). To indicate the range of lines in the buffer that +should be printed, we prefix the command with <,> (comma) which is +shorthand for "the whole buffer": + + *,p + September 2006 + Mo Tu We Th Fr Sa Su + 1 2 3 + 4 5 6 7 8 9 10 + 11 12 13 14 15 16 17 + 18 19 20 21 22 23 24 + 25 26 27 28 29 30 + + * + + Now let's write the buffer contents to a file named `junk' with the + ("write") command. Again, we use the <,> prefix to indicate that +it's the whole buffer we want: + + *,w junk + 143 + * + + Need we say? It's good practice to frequently write the buffer +contents, since unwritten changes to the buffer will be lost when we +exit `ed'. + + The sample sessions below illustrate some basic concepts of line +editing with `ed'. We begin by creating a file, `sonnet', with some +help from Shakespeare. As with the shell, all input to `ed' must be +followed by a character. Comments begin with a `#'. + + $ ed + # The `a' command is for appending text to the editor buffer. + a + No more be grieved at that which thou hast done. + Roses have thorns, and filvers foutians mud. + Clouds and eclipses stain both moon and sun, + And loathsome canker lives in sweetest bud. + . + # Entering a single period on a line returns `ed' to command mode. + # Now write the buffer to the file `sonnet' and quit: + w sonnet + 183 + # `ed' reports the number of characters written. + q + $ ls -l + total 2 + -rw-rw-r-- 1 alm 183 Nov 10 01:16 sonnet + $ + + In the next example, some typos are corrected in the file `sonnet'. + + $ ed sonnet + 183 + # Begin by printing the buffer to the terminal with the `p' command. + # The `,' means ``all lines.'' + ,p + No more be grieved at that which thou hast done. + Roses have thorns, and filvers foutians mud. + Clouds and eclipses stain both moon and sun, + And loathsome canker lives in sweetest bud. + # Select line 2 for editing. + 2 + Roses have thorns, and filvers foutians mud. + # Use the substitute command, `s', to replace `filvers' with `silver', + # and print the result. + s/filvers/silver/p + Roses have thorns, and silver foutians mud. + # And correct the spelling of `fountains'. + s/utia/untai/p + Roses have thorns, and silver fountains mud. + w sonnet + 183 + q + $ + + Since `ed' is line-oriented, we have to tell it which line, or range +of lines we want to edit. In the above example, we do this by +specifying the line's number, or sequence in the buffer. Alternatively, +we could have specified a unique string in the line, e.g., `/filvers/', +where the `/'s delimit the string in question. Subsequent commands +affect only the selected line, a.k.a. the "current" line. Portions of +that line are then replaced with the substitute command, whose syntax +is `s/OLD/NEW/'. + + Although `ed' accepts only one command per line, the print command +`p' is an exception, and may be appended to the end of most commands. + + In the next example, a title is added to our sonnet. + + $ ed sonnet + 183 + a + Sonnet #50 + . + ,p + No more be grieved at that which thou hast done. + Roses have thorns, and silver fountains mud. + Clouds and eclipses stain both moon and sun, + And loathsome canker lives in sweetest bud. + Sonnet #50 + # The title got appended to the end; we should have used `0a' + # to append ``before the first line.'' + # Move the title to its proper place. + 5m0p + Sonnet #50 + # The title is now the first line, and the current line has been + # set to this line as well. + ,p + Sonnet #50 + No more be grieved at that which thou hast done. + Roses have thorns, and silver fountains mud. + Clouds and eclipses stain both moon and sun, + And loathsome canker lives in sweetest bud. + wq sonnet + 195 + $ + + When `ed' opens a file, the current line is initially set to the +last line of that file. Similarly, the move command `m' sets the +current line to the last line moved. + + In summary: + + Structurally, Related programs or routines are `vi (1)', `sed (1)', +`regex (3)', `sh (1)'. Relevant documents are: + + Unix User's Manual Supplementary Documents: 12 -- 13 + + B. W. Kernighan and P. J. Plauger: "Software Tools in Pascal", + Addison-Wesley, 1981. + + +File: ed.info, Node: Invoking Ed, Next: Line Addressing, Prev: Introduction to Line Editing, Up: Top + +3 Invoking Ed +************* + +The format for running `ed' is: + + ed [OPTIONS] [FILE] + red [OPTIONS] [FILE] + + FILE specifies the name of a file to read. If FILE is prefixed with +a bang (!), then it is interpreted as a shell command. In this case, +what is read is the standard output of FILE executed via `sh (1)'. To +read a file whose name begins with a bang, prefix the name with a +backslash (`\'). The default filename is set to FILE only if it is not +prefixed with a bang. + + `ed' supports the following options: + +`--help' +`-h' + Print an informative help message describing the options and exit. + +`--version' +`-V' + Print the version number of `ed' on the standard output and exit. + +`--loose-exit-status' +`-l' + Do not exit with bad status if a command happens to "fail" (for + example if a substitution command finds nothing to replace). This + can be useful when `ed' is invoked as the editor for crontab. + +`--prompt=STRING' +`-p STRING' + Specifies a command prompt. This may be toggled on and off with the + `P' command. + +`--quiet' +`--silent' +`-s' + Suppresses diagnostics. This should be used if `ed''s standard + input is from a script. + +`--traditional' +`-G' + Forces backwards compatibility. This affects the behavior of the + `ed' commands `G', `V', `f', `l', `m', `t' and `!!'. If the + default behavior of these commands does not seem familiar, then + try invoking `ed' with this switch. + +`--verbose' +`-v' + Verbose mode. This may be toggled on and off with the `H' command. + + + +File: ed.info, Node: Line Addressing, Next: Regular Expressions, Prev: Invoking Ed, Up: Top + +4 Line Addressing +***************** + +An address represents the number of a line in the buffer. `ed' +maintains a "current address" which is typically supplied to commands +as the default address when none is specified. When a file is first +read, the current address is set to the last line of the file. In +general, the current address is set to the last line affected by a +command. + + A line address is constructed from one of the bases in the list +below, optionally followed by a numeric offset. The offset may include +any combination of digits, operators (i.e., `+' and `-') and +whitespace. Addresses are read from left to right, and their values may +be absolute or relative to the current address. + + One exception to the rule that addresses represent line numbers is +the address `0' (zero). This means "before the first line," and is +valid wherever it makes sense. + + An address range is two addresses separated either by a comma or +semicolon. The value of the first address in a range cannot exceed the +value of the second. If only one address is given in a range, then the +second address is set to the given address. If an N-tuple of addresses +is given where N > 2, then the corresponding range is determined by the +last two addresses in the N-tuple. If only one address is expected, +then the last address is used. + + Each address in a comma-delimited range is interpreted relative to +the current address. In a semicolon-delimited range, the first address +is used to set the current address, and the second address is +interpreted relative to the first. + + The following address symbols are recognized. + +`.' + The current line (address) in the buffer. + +`$' + The last line in the buffer. + +`N' + The Nth, line in the buffer where N is a number in the range `0,$'. + +`+' + The next line. This is equivalent to `+1' and may be repeated with + cumulative effect. + +`-' + The previous line. This is equivalent to `-1' and may be repeated + with cumulative effect. + +`+N' +`WHITESPACE N' + The Nth next line, where N is a non-negative number. Whitespace + followed by a number N is interpreted as `+N'. + +`-N' + The Nth previous line, where N is a non-negative number. + +`,' + The first through last lines in the buffer. This is equivalent to + the address range `1,$'. + +`;' + The current through last lines in the buffer. This is equivalent + to the address range `.,$'. + +`/RE/' + The next line containing the regular expression RE. The search + wraps to the beginning of the buffer and continues down to the + current line, if necessary. `//' repeats the last search. + +`?RE?' + The previous line containing the regular expression RE. The search + wraps to the end of the buffer and continues up to the current + line, if necessary. `??' repeats the last search. + +`'x' + The apostrophe-x character pair addresses the line previously + marked by a `k' (mark) command, where `x' is a lower case letter + from the portable character set. + + + +File: ed.info, Node: Regular Expressions, Next: Commands, Prev: Line Addressing, Up: Top + +5 Regular Expressions +********************* + +Regular expressions are patterns used in selecting text. For example, +the `ed' command + + g/STRING/ + +prints all lines containing STRING. Regular expressions are also used +by the `s' command for selecting old text to be replaced with new text. + + In addition to a specifying string literals, regular expressions can +represent classes of strings. Strings thus represented are said to be +matched by the corresponding regular expression. If it is possible for a +regular expression to match several strings in a line, then the +left-most longest match is the one selected. + + The following symbols are used in constructing regular expressions: + +`C' + Any character C not listed below, including `{', `}', `(', `)', + `<' and `>', matches itself. + +`\C' + Any backslash-escaped character C, other than `{', ``}', `(', `)', + `<', `>', `b', `B', `w', `W', `+' and `?', matches itself. + +`.' + Matches any single character. + +`[CHAR-CLASS]' + Matches any single character in CHAR-CLASS. To include a `]' in + CHAR-CLASS, it must be the first character. A range of characters + may be specified by separating the end characters of the range + with a `-', e.g., `a-z' specifies the lower case characters. The + following literal expressions can also be used in CHAR-CLASS to + specify sets of characters: + + [:alnum:] [:cntrl:] [:lower:] [:space:] + [:alpha:] [:digit:] [:print:] [:upper:] + [:blank:] [:graph:] [:punct:] [:xdigit:] + + If `-' appears as the first or last character of CHAR-CLASS, then + it matches itself. All other characters in CHAR-CLASS match + themselves. + + Patterns in CHAR-CLASS of the form: + [.COL-ELM.] + [=COL-ELM=] + + where COL-ELM is a "collating element" are interpreted according + to `locale (5)'. See `regex (3)' for an explanation of these + constructs. + +`[^CHAR-CLASS]' + Matches any single character, other than newline, not in + CHAR-CLASS. CHAR-CLASS is defined as above. + +`^' + If `^' is the first character of a regular expression, then it + anchors the regular expression to the beginning of a line. + Otherwise, it matches itself. + +`$' + If `$' is the last character of a regular expression, it anchors + the regular expression to the end of a line. Otherwise, it matches + itself. + +`\(RE\)' + Defines a (possibly null) subexpression RE. Subexpressions may be + nested. A subsequent backreference of the form `\N', where N is a + number in the range [1,9], expands to the text matched by the Nth + subexpression. For example, the regular expression `\(a.c\)\1' + matches the string `abcabc', but not `abcadc'. Subexpressions are + ordered relative to their left delimiter. + +`*' + Matches the single character regular expression or subexpression + immediately preceding it zero or more times. If `*' is the first + character of a regular expression or subexpression, then it matches + itself. The `*' operator sometimes yields unexpected results. For + example, the regular expression `b*' matches the beginning of the + string `abbb', as opposed to the substring `bbb', since a null + match is the only left-most match. + +`\{N,M\}' +`\{N,\}' +`\{N\}' + Matches the single character regular expression or subexpression + immediately preceding it at least N and at most M times. If M is + omitted, then it matches at least N times. If the comma is also + omitted, then it matches exactly N times. If any of these forms + occurs first in a regular expression or subexpression, then it is + interpreted literally (i.e., the regular expression `\{2\}' + matches the string `{2}', and so on). + +`\<' +`\>' + Anchors the single character regular expression or subexpression + immediately following it to the beginning (in the case of `\<') or + ending (in the case of `\>') of a "word", i.e., in ASCII, a + maximal string of alphanumeric characters, including the + underscore (_). + + + The following extended operators are preceded by a backslash `\' to +distinguish them from traditional `ed' syntax. + +`\`' +`\'' + Unconditionally matches the beginning `\`' or ending `\'' of a + line. + +`\?' + Optionally matches the single character regular expression or + subexpression immediately preceding it. For example, the regular + expression `a[bd]\?c' matches the strings `abc', `adc' and `ac'. + If `\?' occurs at the beginning of a regular expressions or + subexpression, then it matches a literal `?'. + +`\+' + Matches the single character regular expression or subexpression + immediately preceding it one or more times. So the regular + expression `a+' is shorthand for `aa*'. If `\+' occurs at the + beginning of a regular expression or subexpression, then it + matches a literal `+'. + +`\b' + Matches the beginning or ending (null string) of a word. Thus the + regular expression `\bhello\b' is equivalent to `\'. + However, `\b\b' is a valid regular expression whereas `\<\>' is + not. + +`\B' + Matches (a null string) inside a word. + +`\w' + Matches any character in a word. + +`\W' + Matches any character not in a word. + + + +File: ed.info, Node: Commands, Next: Limitations, Prev: Regular Expressions, Up: Top + +6 Commands +********** + +All `ed' commands are single characters, though some require additonal +parameters. If a command's parameters extend over several lines, then +each line except for the last must be terminated with a backslash (`\'). + + In general, at most one command is allowed per line. However, most +commands accept a print suffix, which is any of `p' (print), `l' +(list), or `n' (enumerate), to print the last line affected by the +command. + + An interrupt (typically ) has the effect of aborting the +current command and returning the editor to command mode. + + `ed' recognizes the following commands. The commands are shown +together with the default address or address range supplied if none is +specified (in parenthesis). + +`(.)a' + Appends text to the buffer after the addressed line, which may be + the address `0' (zero). Text is entered in input mode. The current + address is set to last line entered. + +`(.,.)c' + Changes lines in the buffer. The addressed lines are deleted from + the buffer, and text is appended in their place. Text is entered + in input mode. The current address is set to last line entered. + +`(.,.)d' + Deletes the addressed lines from the buffer. If there is a line + after the deleted range, then the current address is set to this + line. Otherwise the current address is set to the line before the + deleted range. + +`e FILE' + Edits FILE, and sets the default filename. If FILE is not + specified, then the default filename is used. Any lines in the + buffer are deleted before the new file is read. The current + address is set to the last line read. + +`e !COMMAND' + Edits the standard output of `!COMMAND', (see the `!' command + below). The default filename is unchanged. Any lines in the buffer + are deleted before the output of COMMAND is read. The current + address is set to the last line read. + +`E FILE' + Edits FILE unconditionally. This is similar to the `e' command, + except that unwritten changes are discarded without warning. The + current address is set to the last line read. + +`f FILE' + Sets the default filename to FILE. If FILE is not specified, then + the default unescaped filename is printed. + +`(1,$)g /RE/COMMAND-LIST' + Global command. Applies COMMAND-LIST to each of the addressed + lines matching a regular expression RE. The current address is set + to the line currently matched before COMMAND-LIST is executed. At + the end of the `g' command, the current address is set to the last + line affected by COMMAND-LIST. + + At least the first command of COMMAND-LIST must appear on the same + line as the `g' command. All lines of a multi-line COMMAND-LIST + except the last line must be terminated with a backslash (`\'). + Any commands are allowed, except for `g', `G', `v', and `V'. By + default, a newline alone in COMMAND-LIST is equivalent to a `p' + command. If `ed' is invoked with the command-line option `-G', + then a newline in COMMAND-LIST is equivalent to a `.+1p' command. + +`(1,$)G /RE/' + Interactive global command. Interactively edits the addressed lines + matching a regular expression RE. For each matching line, the line + is printed, the current address is set, and the user is prompted to + enter a COMMAND-LIST. At the end of the `G' command, the current + address is set to the last line affected by (the last) + COMMAND-LIST. + + The format of COMMAND-LIST is the same as that of the `g' command. + A newline alone acts as a null command list. A single `&' repeats + the last non-null command list. + +`H' + Toggles the printing of error explanations. By default, + explanations are not printed. It is recommended that ed scripts + begin with this command to aid in debugging. + +`h' + Prints an explanation of the last error. + +`(.)i' + Inserts text in the buffer before the current line. The address `0' + (zero) is valid for this command; it is equivalent to address `1'. + Text is entered in input mode. The current address is set to the + last line entered. + +`(.,.+1)j' + Joins the addressed lines. The addressed lines are deleted from the + buffer and replaced by a single line containing their joined text. + The current address is set to the resultant line. + +`(.)kx' + Marks a line with a lower case letter `x'. The line can then be + addressed as `'x' (i.e., a single quote followed by `x') in + subsequent commands. The mark is not cleared until the line is + deleted or otherwise modified. + +`(.,.)l' + Prints the addressed lines unambiguously. The end of each line is + marked with a `$', and every `$' character within the text is + printed with a preceding backslash. The current address is set to + the last line printed. + +`(.,.)m(.)' + Moves lines in the buffer. The addressed lines are moved to after + the right-hand destination address, which may be the address `0' + (zero). The current address is set to the new address of the last + line moved. + +`(.,.)n' + Prints the addressed lines, preceding each line by its line number + and a . The current address is set to the last line printed. + +`(.,.)p' + Prints the addressed lines. The current address is set to the last + line printed. + +`P' + Toggles the command prompt on and off. Unless a prompt is + specified with command-line option `-p', the command prompt is by + default turned off. + +`q' + Quits `ed'. + +`Q' + Quits `ed' unconditionally. This is similar to the `q' command, + except that unwritten changes are discarded without warning. + +`($)r FILE' + Reads FILE to after the addressed line. If FILE is not specified, + then the default filename is used. If there is no default filename + prior to the command, then the default filename is set to FILE. + Otherwise, the default filename is unchanged. The current address + is set to the last line read. + +`($)r !COMMAND' + Reads to after the addressed line the standard output of + `!command', (see the `!' command below). The default filename is + unchanged. The current address is set to the last line read. + +`(.,.)s /RE/REPLACEMENT/' +`(.,.)s /RE/REPLACEMENT/g' +`(.,.)s /RE/REPLACEMENT/N' + Replaces text in the addressed lines matching a regular expression + RE with REPLACEMENT. By default, only the first match in each line + is replaced. If the `g' (global) suffix is given, then every match + is replaced. The N suffix, where N is a postive number, causes + only the Nth match to be replaced. It is an error if no + substitutions are performed on any of the addressed lines. The + current address is set to the last line affected. + + RE and REPLACEMENT may be delimited by any character other than + , and the characters used by the form of the `s' + command shown below. If one or two of the last delimiters is + omitted, then the last line affected is printed as if the print + suffix `p' were specified. + + An unescaped `&' in REPLACEMENT is replaced by the currently + matched text. The character sequence `\M' where M is a number in + the range [1,9], is replaced by the Mth backreference expression + of the matched text. If REPLACEMENT consists of a single `%', then + REPLACEMENT from the last substitution is used. Newlines may be + embedded in REPLACEMENT if they are escaped with a backslash (`\'). + +`(.,.)s' + Repeats the last substitution. This form of the `s' command accepts + a count suffix N, and any combination of the characters `r', `g', + and `p'. If a count suffix N is given, then only the Nth match is + replaced. The `r' suffix causes the regular expression of the last + search to be used instead of the that of the last substitution. + The `g' suffix toggles the global suffix of the last substitution. + The `p' suffix toggles the print suffix of the last substitution. + The current address is set to the last line affected. + +`(.,.)t(.)' + Copies (i.e., transfers) the addressed lines to after the + right-hand destination address, which may be the address `0' + (zero). The current address is set to the last line copied. + +`u' + Undoes the last command and restores the current address to what + it was before the command. The global commands `g', `G', `v', and + `V' are treated as a single command by undo. `u' is its own + inverse. + +`(1,$)v /RE/COMMAND-LIST' + This is similar to the `g' command except that it applies + COMMAND-LIST to each of the addressed lines not matching the + regular expression RE. + +`(1,$)V /RE/' + This is similar to the `G' command except that it interactively + edits the addressed lines not matching the regular expression RE. + +`(1,$)w FILE' + Writes the addressed lines to FILE. Any previous contents of FILE + is lost without warning. If there is no default filename, then the + default filename is set to FILE, otherwise it is unchanged. If no + filename is specified, then the default filename is used. The + current address is unchanged. + +`(1,$)w !COMMAND' + Writes the addressed lines to the standard input of `!COMMAND', + (see the `!' command below). The default filename and current + address are unchanged. + +`(1,$)wq FILE' + Writes the addressed lines to FILE, and then executes a `q' + command. + +`(1,$)W FILE' + Appends the addressed lines to the end of FILE. This is similar to + the `w' command, expect that the previous contents of file is not + clobbered. The current address is unchanged. + +`(.)x' + Copies (puts) the contents of the cut buffer to after the addressed + line. The current address is set to the last line copied. + +`(.,.)y' + Copies (yanks) the addressed lines to the cut buffer. The cut + buffer is overwritten by subsequent `y', `s', `j', `d', or `c' + commands. The current address is unchanged. + +`(.+1)z N' + Scrolls N lines at a time starting at addressed line. If N is not + specified, then the current window size is used. The current + address is set to the last line printed. + +`!COMMAND' + Executes COMMAND via `sh (1)'. If the first character of COMMAND + is `!', then it is replaced by text of the previous `!COMMAND'. + `ed' does not process COMMAND for backslash (`\') escapes. + However, an unescaped `%' is replaced by the default filename. + When the shell returns from execution, a `!' is printed to the + standard output. The current line is unchanged. + +`(.,.)#' + Begins a comment; the rest of the line, up to a newline, is + ignored. If a line address followed by a semicolon is given, then + the current address is set to that address. Otherwise, the current + address is unchanged. + +`($)=' + Prints the line number of the addressed line. + +`(.+1)' + An address alone prints the addressed line. A alone is + equivalent to `+1p'. the current address is set to the address of + the printed line. + + + +File: ed.info, Node: Limitations, Next: Diagnostics, Prev: Commands, Up: Top + +7 Limitations +************* + +If the terminal hangs up, `ed' attempts to write the buffer to file +`ed.hup'. + + `ed' processes FILE arguments for backslash escapes, i.e., in a +filename, any characters preceded by a backslash (`\') are interpreted +literally. + + If a text (non-binary) file is not terminated by a newline character, +then `ed' appends one on reading/writing it. In the case of a binary +file, `ed' does not append a newline on reading/writing. + + Per line overhead: 4 `int's. + + +File: ed.info, Node: Diagnostics, Next: Problems, Prev: Limitations, Up: Top + +8 Diagnostics +************* + +When an error occurs, if `ed''s input is from a regular file or here +document, then it exits, otherwise it prints a `?' and returns to +command mode. An explanation of the last error can be printed with the +`h' (help) command. + + If the `u' (undo) command occurs in a global command list, then the +command list is executed only once. + + Attempting to quit `ed' or edit another file before writing a +modified buffer results in an error. If the command is entered a second +time, it succeeds, but any changes to the buffer are lost. + + `ed' exits with 0 if no errors occurred; otherwise >0. + + +File: ed.info, Node: Problems, Next: GNU Free Documentation License, Prev: Diagnostics, Up: Top + +9 Reporting Bugs +**************** + +There are probably bugs in `ed'. There are certainly errors and +omissions in this manual. If you report them, they will get fixed. If +you don't, no one will ever know about them and they will remain unfixed +for all eternity, if not longer. + + If you find a bug in `ed', please send electronic mail to +. Include the version number, which you can find by +running ``ed' --version'. + + +File: ed.info, Node: GNU Free Documentation License, Prev: Problems, Up: Top + +10 GNU Free Documentation License +********************************* + + Version 1.3, 3 November 2008 + + Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. + `http://fsf.org/' + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + 0. PREAMBLE + + The purpose of this License is to make a manual, textbook, or other + functional and useful document "free" in the sense of freedom: to + assure everyone the effective freedom to copy and redistribute it, + with or without modifying it, either commercially or + noncommercially. Secondarily, this License preserves for the + author and publisher a way to get credit for their work, while not + being considered responsible for modifications made by others. + + This License is a kind of "copyleft", which means that derivative + works of the document must themselves be free in the same sense. + It complements the GNU General Public License, which is a copyleft + license designed for free software. + + We have designed this License in order to use it for manuals for + free software, because free software needs free documentation: a + free program should come with manuals providing the same freedoms + that the software does. But this License is not limited to + software manuals; it can be used for any textual work, regardless + of subject matter or whether it is published as a printed book. + We recommend this License principally for works whose purpose is + instruction or reference. + + 1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work, in any medium, + that contains a notice placed by the copyright holder saying it + can be distributed under the terms of this License. Such a notice + grants a world-wide, royalty-free license, unlimited in duration, + to use that work under the conditions stated herein. The + "Document", below, refers to any such manual or work. Any member + of the public is a licensee, and is addressed as "you". You + accept the license if you copy, modify or distribute the work in a + way requiring permission under copyright law. + + A "Modified Version" of the Document means any work containing the + Document or a portion of it, either copied verbatim, or with + modifications and/or translated into another language. + + A "Secondary Section" is a named appendix or a front-matter section + of the Document that deals exclusively with the relationship of the + publishers or authors of the Document to the Document's overall + subject (or to related matters) and contains nothing that could + fall directly within that overall subject. (Thus, if the Document + is in part a textbook of mathematics, a Secondary Section may not + explain any mathematics.) The relationship could be a matter of + historical connection with the subject or with related matters, or + of legal, commercial, philosophical, ethical or political position + regarding them. + + The "Invariant Sections" are certain Secondary Sections whose + titles are designated, as being those of Invariant Sections, in + the notice that says that the Document is released under this + License. If a section does not fit the above definition of + Secondary then it is not allowed to be designated as Invariant. + The Document may contain zero Invariant Sections. If the Document + does not identify any Invariant Sections then there are none. + + The "Cover Texts" are certain short passages of text that are + listed, as Front-Cover Texts or Back-Cover Texts, in the notice + that says that the Document is released under this License. A + Front-Cover Text may be at most 5 words, and a Back-Cover Text may + be at most 25 words. + + A "Transparent" copy of the Document means a machine-readable copy, + represented in a format whose specification is available to the + general public, that is suitable for revising the document + straightforwardly with generic text editors or (for images + composed of pixels) generic paint programs or (for drawings) some + widely available drawing editor, and that is suitable for input to + text formatters or for automatic translation to a variety of + formats suitable for input to text formatters. A copy made in an + otherwise Transparent file format whose markup, or absence of + markup, has been arranged to thwart or discourage subsequent + modification by readers is not Transparent. An image format is + not Transparent if used for any substantial amount of text. A + copy that is not "Transparent" is called "Opaque". + + Examples of suitable formats for Transparent copies include plain + ASCII without markup, Texinfo input format, LaTeX input format, + SGML or XML using a publicly available DTD, and + standard-conforming simple HTML, PostScript or PDF designed for + human modification. Examples of transparent image formats include + PNG, XCF and JPG. Opaque formats include proprietary formats that + can be read and edited only by proprietary word processors, SGML or + XML for which the DTD and/or processing tools are not generally + available, and the machine-generated HTML, PostScript or PDF + produced by some word processors for output purposes only. + + The "Title Page" means, for a printed book, the title page itself, + plus such following pages as are needed to hold, legibly, the + material this License requires to appear in the title page. For + works in formats which do not have any title page as such, "Title + Page" means the text near the most prominent appearance of the + work's title, preceding the beginning of the body of the text. + + The "publisher" means any person or entity that distributes copies + of the Document to the public. + + A section "Entitled XYZ" means a named subunit of the Document + whose title either is precisely XYZ or contains XYZ in parentheses + following text that translates XYZ in another language. (Here XYZ + stands for a specific section name mentioned below, such as + "Acknowledgements", "Dedications", "Endorsements", or "History".) + To "Preserve the Title" of such a section when you modify the + Document means that it remains a section "Entitled XYZ" according + to this definition. + + The Document may include Warranty Disclaimers next to the notice + which states that this License applies to the Document. These + Warranty Disclaimers are considered to be included by reference in + this License, but only as regards disclaiming warranties: any other + implication that these Warranty Disclaimers may have is void and + has no effect on the meaning of this License. + + 2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License + applies to the Document are reproduced in all copies, and that you + add no other conditions whatsoever to those of this License. You + may not use technical measures to obstruct or control the reading + or further copying of the copies you make or distribute. However, + you may accept compensation in exchange for copies. If you + distribute a large enough number of copies you must also follow + the conditions in section 3. + + You may also lend copies, under the same conditions stated above, + and you may publicly display copies. + + 3. COPYING IN QUANTITY + + If you publish printed copies (or copies in media that commonly + have printed covers) of the Document, numbering more than 100, and + the Document's license notice requires Cover Texts, you must + enclose the copies in covers that carry, clearly and legibly, all + these Cover Texts: Front-Cover Texts on the front cover, and + Back-Cover Texts on the back cover. Both covers must also clearly + and legibly identify you as the publisher of these copies. The + front cover must present the full title with all words of the + title equally prominent and visible. You may add other material + on the covers in addition. Copying with changes limited to the + covers, as long as they preserve the title of the Document and + satisfy these conditions, can be treated as verbatim copying in + other respects. + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto + adjacent pages. + + If you publish or distribute Opaque copies of the Document + numbering more than 100, you must either include a + machine-readable Transparent copy along with each Opaque copy, or + state in or with each Opaque copy a computer-network location from + which the general network-using public has access to download + using public-standard network protocols a complete Transparent + copy of the Document, free of added material. If you use the + latter option, you must take reasonably prudent steps, when you + begin distribution of Opaque copies in quantity, to ensure that + this Transparent copy will remain thus accessible at the stated + location until at least one year after the last time you + distribute an Opaque copy (directly or through your agents or + retailers) of that edition to the public. + + It is requested, but not required, that you contact the authors of + the Document well before redistributing any large number of + copies, to give them a chance to provide you with an updated + version of the Document. + + 4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document + under the conditions of sections 2 and 3 above, provided that you + release the Modified Version under precisely this License, with + the Modified Version filling the role of the Document, thus + licensing distribution and modification of the Modified Version to + whoever possesses a copy of it. In addition, you must do these + things in the Modified Version: + + A. Use in the Title Page (and on the covers, if any) a title + distinct from that of the Document, and from those of + previous versions (which should, if there were any, be listed + in the History section of the Document). You may use the + same title as a previous version if the original publisher of + that version gives permission. + + B. List on the Title Page, as authors, one or more persons or + entities responsible for authorship of the modifications in + the Modified Version, together with at least five of the + principal authors of the Document (all of its principal + authors, if it has fewer than five), unless they release you + from this requirement. + + C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. + + D. Preserve all the copyright notices of the Document. + + E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + + F. Include, immediately after the copyright notices, a license + notice giving the public permission to use the Modified + Version under the terms of this License, in the form shown in + the Addendum below. + + G. Preserve in that license notice the full lists of Invariant + Sections and required Cover Texts given in the Document's + license notice. + + H. Include an unaltered copy of this License. + + I. Preserve the section Entitled "History", Preserve its Title, + and add to it an item stating at least the title, year, new + authors, and publisher of the Modified Version as given on + the Title Page. If there is no section Entitled "History" in + the Document, create one stating the title, year, authors, + and publisher of the Document as given on its Title Page, + then add an item describing the Modified Version as stated in + the previous sentence. + + J. Preserve the network location, if any, given in the Document + for public access to a Transparent copy of the Document, and + likewise the network locations given in the Document for + previous versions it was based on. These may be placed in + the "History" section. You may omit a network location for a + work that was published at least four years before the + Document itself, or if the original publisher of the version + it refers to gives permission. + + K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the + section all the substance and tone of each of the contributor + acknowledgements and/or dedications given therein. + + L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section + titles. + + M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. + + N. Do not retitle any existing section to be Entitled + "Endorsements" or to conflict in title with any Invariant + Section. + + O. Preserve any Warranty Disclaimers. + + If the Modified Version includes new front-matter sections or + appendices that qualify as Secondary Sections and contain no + material copied from the Document, you may at your option + designate some or all of these sections as invariant. To do this, + add their titles to the list of Invariant Sections in the Modified + Version's license notice. These titles must be distinct from any + other section titles. + + You may add a section Entitled "Endorsements", provided it contains + nothing but endorsements of your Modified Version by various + parties--for example, statements of peer review or that the text + has been approved by an organization as the authoritative + definition of a standard. + + You may add a passage of up to five words as a Front-Cover Text, + and a passage of up to 25 words as a Back-Cover Text, to the end + of the list of Cover Texts in the Modified Version. Only one + passage of Front-Cover Text and one of Back-Cover Text may be + added by (or through arrangements made by) any one entity. If the + Document already includes a cover text for the same cover, + previously added by you or by arrangement made by the same entity + you are acting on behalf of, you may not add another; but you may + replace the old one, on explicit permission from the previous + publisher that added the old one. + + The author(s) and publisher(s) of the Document do not by this + License give permission to use their names for publicity for or to + assert or imply endorsement of any Modified Version. + + 5. COMBINING DOCUMENTS + + You may combine the Document with other documents released under + this License, under the terms defined in section 4 above for + modified versions, provided that you include in the combination + all of the Invariant Sections of all of the original documents, + unmodified, and list them all as Invariant Sections of your + combined work in its license notice, and that you preserve all + their Warranty Disclaimers. + + The combined work need only contain one copy of this License, and + multiple identical Invariant Sections may be replaced with a single + copy. If there are multiple Invariant Sections with the same name + but different contents, make the title of each such section unique + by adding at the end of it, in parentheses, the name of the + original author or publisher of that section if known, or else a + unique number. Make the same adjustment to the section titles in + the list of Invariant Sections in the license notice of the + combined work. + + In the combination, you must combine any sections Entitled + "History" in the various original documents, forming one section + Entitled "History"; likewise combine any sections Entitled + "Acknowledgements", and any sections Entitled "Dedications". You + must delete all sections Entitled "Endorsements." + + 6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other + documents released under this License, and replace the individual + copies of this License in the various documents with a single copy + that is included in the collection, provided that you follow the + rules of this License for verbatim copying of each of the + documents in all other respects. + + You may extract a single document from such a collection, and + distribute it individually under this License, provided you insert + a copy of this License into the extracted document, and follow + this License in all other respects regarding verbatim copying of + that document. + + 7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with other + separate and independent documents or works, in or on a volume of + a storage or distribution medium, is called an "aggregate" if the + copyright resulting from the compilation is not used to limit the + legal rights of the compilation's users beyond what the individual + works permit. When the Document is included in an aggregate, this + License does not apply to the other works in the aggregate which + are not themselves derivative works of the Document. + + If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one half + of the entire aggregate, the Document's Cover Texts may be placed + on covers that bracket the Document within the aggregate, or the + electronic equivalent of covers if the Document is in electronic + form. Otherwise they must appear on printed covers that bracket + the whole aggregate. + + 8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of section + 4. Replacing Invariant Sections with translations requires special + permission from their copyright holders, but you may include + translations of some or all Invariant Sections in addition to the + original versions of these Invariant Sections. You may include a + translation of this License, and all the license notices in the + Document, and any Warranty Disclaimers, provided that you also + include the original English version of this License and the + original versions of those notices and disclaimers. In case of a + disagreement between the translation and the original version of + this License or a notice or disclaimer, the original version will + prevail. + + If a section in the Document is Entitled "Acknowledgements", + "Dedications", or "History", the requirement (section 4) to + Preserve its Title (section 1) will typically require changing the + actual title. + + 9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document + except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense, or distribute it is void, + and will automatically terminate your rights under this License. + + However, if you cease all violation of this License, then your + license from a particular copyright holder is reinstated (a) + provisionally, unless and until the copyright holder explicitly + and finally terminates your license, and (b) permanently, if the + copyright holder fails to notify you of the violation by some + reasonable means prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from + that copyright holder, and you cure the violation prior to 30 days + after your receipt of the notice. + + Termination of your rights under this section does not terminate + the licenses of parties who have received copies or rights from + you under this License. If your rights have been terminated and + not permanently reinstated, receipt of a copy of some or all of + the same material does not give you any rights to use it. + + 10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software Foundation may publish new, revised versions of + the GNU Free Documentation License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. See + `http://www.gnu.org/copyleft/'. + + Each version of the License is given a distinguishing version + number. If the Document specifies that a particular numbered + version of this License "or any later version" applies to it, you + have the option of following the terms and conditions either of + that specified version or of any later version that has been + published (not as a draft) by the Free Software Foundation. If + the Document does not specify a version number of this License, + you may choose any version ever published (not as a draft) by the + Free Software Foundation. If the Document specifies that a proxy + can decide which future versions of this License can be used, that + proxy's public statement of acceptance of a version permanently + authorizes you to choose that version for the Document. + + 11. RELICENSING + + "Massive Multiauthor Collaboration Site" (or "MMC Site") means any + World Wide Web server that publishes copyrightable works and also + provides prominent facilities for anybody to edit those works. A + public wiki that anybody can edit is an example of such a server. + A "Massive Multiauthor Collaboration" (or "MMC") contained in the + site means any set of copyrightable works thus published on the MMC + site. + + "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 + license published by Creative Commons Corporation, a not-for-profit + corporation with a principal place of business in San Francisco, + California, as well as future copyleft versions of that license + published by that same organization. + + "Incorporate" means to publish or republish a Document, in whole or + in part, as part of another Document. + + An MMC is "eligible for relicensing" if it is licensed under this + License, and if all works that were first published under this + License somewhere other than this MMC, and subsequently + incorporated in whole or in part into the MMC, (1) had no cover + texts or invariant sections, and (2) were thus incorporated prior + to November 1, 2008. + + The operator of an MMC Site may republish an MMC contained in the + site under CC-BY-SA on the same site at any time before August 1, + 2009, provided the MMC is eligible for relicensing. + + +ADDENDUM: How to use this License for your documents +==================================================== + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and license +notices just after the title page: + + Copyright (C) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. + + If you have Invariant Sections, Front-Cover Texts and Back-Cover +Texts, replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with + the Front-Cover Texts being LIST, and with the Back-Cover Texts + being LIST. + + If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + + If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, to +permit their use in free software. + + + +Tag Table: +Node: Top544 +Node: Overview2005 +Node: Introduction to Line Editing4062 +Node: Invoking Ed11305 +Node: Line Addressing12953 +Node: Regular Expressions16056 +Node: Commands21401 +Node: Limitations32546 +Node: Diagnostics33121 +Node: Problems33825 +Node: GNU Free Documentation License34360 + +End Tag Table diff --git a/doc/ed.texinfo b/doc/ed.texinfo new file mode 100644 index 0000000..5b77d4d --- /dev/null +++ b/doc/ed.texinfo @@ -0,0 +1,982 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename ed.info +@settitle GNU @command{ed} Manual +@finalout +@c %**end of header + +@set UPDATED 10 July 2009 +@set VERSION 1.4 + +@dircategory Basics +@direntry +* Ed: (ed). The GNU line editor +@end direntry + +@copying +Copyright @copyright{} 1993, 2006, 2007, 2008, 2009 +Free Software Foundation, Inc. + +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. +@end copying + +@titlepage +@title GNU ed +@subtitle The GNU line editor +@subtitle for GNU ed version @value{VERSION}, @value{UPDATED} +@author by Andrew L. Moore and Antonio Diaz Diaz +@page +@vskip 0pt plus 1filll +@insertcopying +@end titlepage + +@contents + +@ifnottex +@node Top +@top The GNU ed line editor + +This manual is for GNU ed (version @value{VERSION}, @value{UPDATED}). + +@sp 1 +GNU ed is an 8-bit clean, more or less POSIX-compliant implementation of +the standard Unix line editor. These days, full-screen editors have +rendered @command{ed} mostly of historical interest. Nonetheless, it +appeals to a handful of aging programmers who still believe that ``Small +is Beautiful''. +@end ifnottex + +@menu +* Overview:: Overview of the @command{ed} command +* Introduction to Line Editing:: Getting started with GNU @command{ed} +* Invoking Ed:: Command line interface +* Line Addressing:: Specifying lines/ranges in the buffer +* Regular Expressions:: Patterns for selecting text +* Commands:: Commands recognized by GNU @command{ed} +* Limitations:: Intrinsic limits of GNU @command{ed} +* Diagnostics:: GNU @command{ed} error handling +* Problems:: Reporting bugs +* GNU Free Documentation License:: How you can copy and share this manual + +@end menu + +@sp 1 +@insertcopying + + +@node Overview +@chapter Overview + +@command{ed} is a line-oriented text editor. It is used to create, +display, modify and otherwise manipulate text files. @command{red} is a +restricted @command{ed}: it can only edit files in the current directory +and cannot execute shell commands. + +If invoked with a @var{file} argument, then a copy of @var{file} is read +into the editor's buffer. Changes are made to this copy and not directly +to @var{file} itself. Upon quitting @command{ed}, any changes not +explicitly saved with a @samp{w} command are lost. + +Editing is done in two distinct modes: @dfn{command} and @dfn{input}. +When first invoked, @command{ed} is in command mode. In this mode +commands are read from the standard input and executed to manipulate the +contents of the editor buffer. A typical command might look like: + +@example +,s/@var{old}/@var{new}/g +@end example + +which replaces all occurences of the string @var{old} with @var{new}. + +When an input command, such as @samp{a} (append), @samp{i} (insert) or +@samp{c} (change), is given, @command{ed} enters input mode. This is the +primary means of adding text to a file. In this mode, no commands are +available; instead, the standard input is written directly to the editor +buffer. A @dfn{line} consists of the text up to and including a +@key{newline} character. Input mode is terminated by entering a single +period (@samp{.}) on a line. + +All @command{ed} commands operate on whole lines or ranges of lines; +e.g., the @samp{d} command deletes lines; the @samp{m} command moves +lines, and so on. It is possible to modify only a portion of a line by +means of replacement, as in the example above. However even here, the +@samp{s} command is applied to whole lines at a time. + +In general, @command{ed} commands consist of zero or more line +addresses, followed by a single character command and possibly +additional parameters; i.e., commands have the structure: + +@example +[@var{address} [,@var{address}]]@var{command}[@var{parameters}] +@end example + +The @var{address}es indicate the line or range of lines to be affected +by the command. If fewer addresses are given than the command accepts, +then default addresses are supplied. + + +@node Introduction to Line Editing +@chapter Introduction to Line Editing + +@command{ed} was created, along with the Unix operating system, by Ken +Thompson and Dennis Ritchie. It is the refinement of its more complex, +programmable predecessor, @cite{QED}, to which Thompson and Ritchie had +already added pattern matching capabilities (@pxref{Regular +Expressions}). + +For the purposes of this tutorial, a working knowledge of the Unix shell +@command{sh} (@pxref{Bash,,, bash, The GNU Bash Reference Manual}) and +the Unix file system is recommended, since @command{ed} is designed to +interact closely with them. + +The principal difference between line editors and display editors is +that display editors provide instant feedback to user commands, whereas +line editors require sometimes lengthy input before any effects are +seen. The advantage of instant feedback, of course, is that if a mistake +is made, it can be corrected immediately, before more damage is done. +Editing in @command{ed} requires more strategy and forethought; but if +you are up to the task, it can be quite efficient. + +Much of the @command{ed} command syntax is shared with other Unix +utilities. + +As with the shell, @key{RETURN} (the carriage-return key) enters a line +of input. So when we speak of ``entering'' a command or some text in +@command{ed}, @key{RETURN} is implied at the end of each line. Prior to +typing @key{RETURN}, corrections to the line may be made by typing +either @key{BACKSPACE} (sometimes labeled @key{DELETE} or @key{DEL}) to +erase characters backwards, or @key{CONTROL}-u (i.e., hold the CONTROL +key and type u) to erase the whole line. + +When @command{ed} first opens, it expects to be told what to do but +doesn't prompt us like the shell. So let's begin by telling @command{ed} +to do so with the @key{P} (@dfn{prompt}) command: + +@example +$ ed +P +* +@end example + +By default, @command{ed} uses asterisk (@samp{*}) as command prompt to +avoid confusion with the shell command prompt (@samp{$}). + +We can run Unix shell (@command{sh}) commands from inside @command{ed} +by prefixing them with @key{!} (exclamation mark, aka ``bang''). For +example: + +@example +*!date +Mon Jun 26 10:08:41 PDT 2006 +! +*!for s in hello world; do echo $s; done +hello +world +! +* +@end example + +So far, this is no different from running commands in the Unix shell. +But let's say we want to edit the output of a command, or save it to a +file. First we must capture the command output to a temporary location +called a @dfn{buffer} where @command{ed} can access it. This is done +with @command{ed}'s @key{r} command (mnemonic: @dfn{read}): + +@example +*r !cal +143 +* +@end example + +Here @command{ed} is telling us that it has just read 143 characters +into the editor buffer - i.e., the output of the @command{cal} command, +which prints a simple ASCII calendar. To display the buffer contents we +issue the @key{p} (@dfn{print}) command (not to be confused with the +prompt command, which is uppercase!). To indicate the range of lines in +the buffer that should be printed, we prefix the command with @key{,} +(comma) which is shorthand for ``the whole buffer'': + +@example +*,p + September 2006 +Mo Tu We Th Fr Sa Su + 1 2 3 + 4 5 6 7 8 9 10 +11 12 13 14 15 16 17 +18 19 20 21 22 23 24 +25 26 27 28 29 30 + +* +@end example + +Now let's write the buffer contents to a file named @code{junk} with the +@key{w} (@dfn{write}) command. Again, we use the @key{,} prefix to +indicate that it's the whole buffer we want: + +@example +*,w junk +143 +* +@end example + +Need we say? It's good practice to frequently write the buffer contents, +since unwritten changes to the buffer will be lost when we exit +@command{ed}. + +The sample sessions below illustrate some basic concepts of line editing +with @command{ed}. We begin by creating a file, @samp{sonnet}, with some +help from Shakespeare. As with the shell, all input to @command{ed} must +be followed by a @key{newline} character. Comments begin with a @samp{#}. + +@example +$ ed +# The `a' command is for appending text to the editor buffer. +a +No more be grieved at that which thou hast done. +Roses have thorns, and filvers foutians mud. +Clouds and eclipses stain both moon and sun, +And loathsome canker lives in sweetest bud. +. +# Entering a single period on a line returns @command{ed} to command mode. +# Now write the buffer to the file @samp{sonnet} and quit: +w sonnet +183 +# @command{ed} reports the number of characters written. +q +$ ls -l +total 2 +-rw-rw-r-- 1 alm 183 Nov 10 01:16 sonnet +$ +@end example + +In the next example, some typos are corrected in the file @samp{sonnet}. + +@example +$ ed sonnet +183 +# Begin by printing the buffer to the terminal with the @samp{p} command. +# The `,' means ``all lines.'' +,p +No more be grieved at that which thou hast done. +Roses have thorns, and filvers foutians mud. +Clouds and eclipses stain both moon and sun, +And loathsome canker lives in sweetest bud. +# Select line 2 for editing. +2 +Roses have thorns, and filvers foutians mud. +# Use the substitute command, @samp{s}, to replace `filvers' with `silver', +# and print the result. +s/filvers/silver/p +Roses have thorns, and silver foutians mud. +# And correct the spelling of `fountains'. +s/utia/untai/p +Roses have thorns, and silver fountains mud. +w sonnet +183 +q +$ +@end example + +Since @command{ed} is line-oriented, we have to tell it which line, or +range of lines we want to edit. In the above example, we do this by +specifying the line's number, or sequence in the buffer. Alternatively, +we could have specified a unique string in the line, e.g., +@samp{/filvers/}, where the @samp{/}s delimit the string in question. +Subsequent commands affect only the selected line, a.k.a. the +@dfn{current} line. Portions of that line are then replaced with the +substitute command, whose syntax is @samp{s/@var{old}/@var{new}/}. + +Although @command{ed} accepts only one command per line, the print +command @samp{p} is an exception, and may be appended to the end of most +commands. + +In the next example, a title is added to our sonnet. + +@example +$ ed sonnet +183 +a + Sonnet #50 +. +,p +No more be grieved at that which thou hast done. +Roses have thorns, and silver fountains mud. +Clouds and eclipses stain both moon and sun, +And loathsome canker lives in sweetest bud. + Sonnet #50 +# The title got appended to the end; we should have used `0a' +# to append ``before the first line.'' +# Move the title to its proper place. +5m0p + Sonnet #50 +# The title is now the first line, and the current line has been +# set to this line as well. +,p + Sonnet #50 +No more be grieved at that which thou hast done. +Roses have thorns, and silver fountains mud. +Clouds and eclipses stain both moon and sun, +And loathsome canker lives in sweetest bud. +wq sonnet +195 +$ +@end example + +When @command{ed} opens a file, the current line is initially set to the +last line of that file. Similarly, the move command @samp{m} sets the +current line to the last line moved. + +In summary: + +Structurally, +Related programs or routines are @command{vi (1)}, @command{sed (1)}, +@command{regex (3)}, @command{sh (1)}. Relevant documents +are: + +@quotation +Unix User's Manual Supplementary Documents: 12 --- 13 +@end quotation + +@quotation +B. W. Kernighan and P. J. Plauger: ``Software Tools in Pascal'', +Addison-Wesley, 1981. +@end quotation + + +@node Invoking Ed +@chapter Invoking Ed + +The format for running @command{ed} is: + +@example +ed [@var{options}] [@var{file}] +red [@var{options}] [@var{file}] +@end example + +@var{file} specifies the name of a file to read. If @var{file} is +prefixed with a bang (!), then it is interpreted as a shell command. In +this case, what is read is the standard output of @var{file} executed +via @command{sh (1)}. To read a file whose name begins with a bang, +prefix the name with a backslash (@kbd{\}). The default filename is set +to @var{file} only if it is not prefixed with a bang. + +@command{ed} supports the following options: + +@table @code +@item --help +@itemx -h +Print an informative help message describing the options and exit. + +@item --version +@itemx -V +Print the version number of @command{ed} on the standard output and exit. + +@item --loose-exit-status +@itemx -l +Do not exit with bad status if a command happens to "fail" (for example +if a substitution command finds nothing to replace). This can be useful +when @command{ed} is invoked as the editor for crontab. + +@item --prompt=@var{string} +@itemx -p @var{string} +Specifies a command prompt. This may be toggled on and off with the +@samp{P} command. + +@item --quiet +@itemx --silent +@itemx -s +Suppresses diagnostics. This should be used if @command{ed}'s standard +input is from a script. + +@item --traditional +@itemx -G +Forces backwards compatibility. This affects the behavior of the +@command{ed} commands @samp{G}, @samp{V}, @samp{f}, @samp{l}, @samp{m}, +@samp{t} and @samp{!!}. If the default behavior of these commands does +not seem familiar, then try invoking @command{ed} with this switch. + +@item --verbose +@itemx -v +Verbose mode. This may be toggled on and off with the @samp{H} command. + +@end table + + +@node Line Addressing +@chapter Line Addressing + +An address represents the number of a line in the buffer. @command{ed} +maintains a @dfn{current address} which is typically supplied to +commands as the default address when none is specified. When a file is +first read, the current address is set to the last line of the file. In +general, the current address is set to the last line affected by a +command. + +A line address is constructed from one of the bases in the list below, +optionally followed by a numeric offset. The offset may include any +combination of digits, operators (i.e., @samp{+} and @samp{-}) and +whitespace. Addresses are read from left to right, and their values may +be absolute or relative to the current address. + +One exception to the rule that addresses represent line numbers is the +address @samp{0} (zero). This means ``before the first line,'' and is +valid wherever it makes sense. + +An address range is two addresses separated either by a comma or +semicolon. The value of the first address in a range cannot exceed the +value of the second. If only one address is given in a range, then the +second address is set to the given address. If an @var{n}-tuple of +addresses is given where @var{n} > 2, then the corresponding range is +determined by the last two addresses in the @var{n}-tuple. If only one +address is expected, then the last address is used. + +Each address in a comma-delimited range is interpreted relative to the +current address. In a semicolon-delimited range, the first address is +used to set the current address, and the second address is interpreted +relative to the first. + +The following address symbols are recognized. + +@table @code +@item . +The current line (address) in the buffer. + +@item $ +The last line in the buffer. + +@item @var{n} +The @var{n}th, line in the buffer where @var{n} is a number in the range +@samp{0,$}. + +@item + +The next line. This is equivalent to @samp{+1} and may be repeated with +cumulative effect. + +@item - +The previous line. This is equivalent to @samp{-1} and may be repeated +with cumulative effect. + +@item +@var{n} +@itemx @var{whitespace} @var{n} +The @var{n}th next line, where @var{n} is a non-negative number. +Whitespace followed by a number @var{n} is interpreted as +@samp{+@var{n}}. + +@item -@var{n} +The @var{n}th previous line, where @var{n} is a non-negative number. + +@item , +The first through last lines in the buffer. This is equivalent to the +address range @samp{1,$}. + +@item ; +The current through last lines in the buffer. This is equivalent to the +address range @samp{.,$}. + +@item /@var{re}/ +The next line containing the regular expression @var{re}. The search +wraps to the beginning of the buffer and continues down to the current +line, if necessary. @samp{//} repeats the last search. + +@item ?@var{re}? +The previous line containing the regular expression @var{re}. The search +wraps to the end of the buffer and continues up to the current line, if +necessary. @samp{??} repeats the last search. + +@item 'x +The apostrophe-x character pair addresses the line previously marked by +a @samp{k} (mark) command, where @samp{x} is a lower case letter from +the portable character set. + +@end table + + +@node Regular Expressions +@chapter Regular Expressions + +Regular expressions are patterns used in selecting text. For example, +the @command{ed} command + +@example +g/@var{string}/ +@end example + +@noindent +prints all lines containing @var{string}. Regular expressions are also +used by the @samp{s} command for selecting old text to be replaced with +new text. + +In addition to a specifying string literals, regular expressions can +represent classes of strings. Strings thus represented are said to be +matched by the corresponding regular expression. If it is possible for a +regular expression to match several strings in a line, then the +left-most longest match is the one selected. + +The following symbols are used in constructing regular expressions: + +@table @code + +@item @var{c} +Any character @var{c} not listed below, including @samp{@{}, @samp{@}}, +@samp{(}, @samp{)}, @samp{<} and @samp{>}, matches itself. + +@item \@var{c} +Any backslash-escaped character @var{c}, other than @samp{@{}, +`@samp{@}}, @samp{(}, @samp{)}, @samp{<}, @samp{>}, @samp{b}, @samp{B}, +@samp{w}, @samp{W}, @samp{+} and @samp{?}, matches itself. + +@item . +Matches any single character. + +@item [@var{char-class}] +Matches any single character in @var{char-class}. To include a @samp{]} +in @var{char-class}, it must be the first character. A range of +characters may be specified by separating the end characters of the +range with a @samp{-}, e.g., @samp{a-z} specifies the lower case +characters. The following literal expressions can also be used in +@var{char-class} to specify sets of characters: + +@example +[:alnum:] [:cntrl:] [:lower:] [:space:] +[:alpha:] [:digit:] [:print:] [:upper:] +[:blank:] [:graph:] [:punct:] [:xdigit:] +@end example + +If @samp{-} appears as the first or last character of @var{char-class}, +then it matches itself. All other characters in @var{char-class} match +themselves. + +Patterns in +@var{char-class} +of the form: +@example +[.@var{col-elm}.] +[=@var{col-elm}=] +@end example + +@noindent +where @var{col-elm} is a @dfn{collating element} are interpreted +according to @code{locale (5)}. See +@code{regex (3)} for an explanation of these constructs. + +@item [^@var{char-class}] +Matches any single character, other than newline, not in +@var{char-class}. @var{char-class} is defined as above. + +@item ^ +If @samp{^} is the first character of a regular expression, then it +anchors the regular expression to the beginning of a line. Otherwise, +it matches itself. + +@item $ +If @samp{$} is the last character of a regular expression, it anchors +the regular expression to the end of a line. Otherwise, it matches +itself. + +@item \(@var{re}\) +Defines a (possibly null) subexpression @var{re}. Subexpressions may be +nested. A subsequent backreference of the form @samp{\@var{n}}, where +@var{n} is a number in the range [1,9], expands to the text matched by +the @var{n}th subexpression. For example, the regular expression +@samp{\(a.c\)\1} matches the string @samp{abcabc}, but not +@samp{abcadc}. Subexpressions are ordered relative to their left +delimiter. + +@item * +Matches the single character regular expression or subexpression +immediately preceding it zero or more times. If @samp{*} is the first +character of a regular expression or subexpression, then it matches +itself. The @samp{*} operator sometimes yields unexpected results. For +example, the regular expression @samp{b*} matches the beginning of the +string @samp{abbb}, as opposed to the substring @samp{bbb}, since a null +match is the only left-most match. + +@item \@{@var{n},@var{m}\@} +@itemx \@{@var{n},\@} +@itemx \@{@var{n}\@} +Matches the single character regular expression or subexpression +immediately preceding it at least @var{n} and at most @var{m} times. If +@var{m} is omitted, then it matches at least @var{n} times. If the comma +is also omitted, then it matches exactly @var{n} times. If any of these +forms occurs first in a regular expression or subexpression, then it is +interpreted literally (i.e., the regular expression @samp{\@{2\@}} +matches the string @samp{@{2@}}, and so on). + +@item \< +@itemx \> +Anchors the single character regular expression or subexpression +immediately following it to the beginning (in the case of @samp{\<}) or +ending (in the case of @samp{\>}) of a @dfn{word}, i.e., in ASCII, a +maximal string of alphanumeric characters, including the underscore (_). + +@end table + +The following extended operators are preceded by a backslash @samp{\} to +distinguish them from traditional @command{ed} syntax. + +@table @code + +@item \` +@itemx \' +Unconditionally matches the beginning @samp{\`} or ending @samp{\'} of a line. + +@item \? +Optionally matches the single character regular expression or +subexpression immediately preceding it. For example, the regular +expression @samp{a[bd]\?c} matches the strings @samp{abc}, @samp{adc} +and @samp{ac}. If @samp{\?} occurs at the beginning of a regular +expressions or subexpression, then it matches a literal @samp{?}. + +@item \+ +Matches the single character regular expression or subexpression +immediately preceding it one or more times. So the regular expression +@samp{a+} is shorthand for @samp{aa*}. If @samp{\+} occurs at the +beginning of a regular expression or subexpression, then it matches a +literal @samp{+}. + +@item \b +Matches the beginning or ending (null string) of a word. Thus the +regular expression @samp{\bhello\b} is equivalent to @samp{\}. +However, @samp{\b\b} is a valid regular expression whereas @samp{\<\>} +is not. + +@item \B +Matches (a null string) inside a word. + +@item \w +Matches any character in a word. + +@item \W +Matches any character not in a word. + +@end table + + +@node Commands +@chapter Commands + +All @command{ed} commands are single characters, though some require +additonal parameters. If a command's parameters extend over several +lines, then each line except for the last must be terminated with a +backslash (@samp{\}). + +In general, at most one command is allowed per line. However, most +commands accept a print suffix, which is any of @samp{p} (print), +@samp{l} (list), or @samp{n} (enumerate), to print the last line +affected by the command. + +An interrupt (typically @key{Control-C}) has the effect of aborting the +current command and returning the editor to command mode. + +@command{ed} recognizes the following commands. The commands are shown +together with the default address or address range supplied if none is +specified (in parenthesis). + +@table @code + +@item (.)a +Appends text to the buffer after the addressed line, which may be the +address @samp{0} (zero). Text is entered in input mode. The current +address is set to last line entered. + +@item (.,.)c +Changes lines in the buffer. The addressed lines are deleted from the +buffer, and text is appended in their place. Text is entered in input +mode. The current address is set to last line entered. + +@item (.,.)d +Deletes the addressed lines from the buffer. If there is a line after +the deleted range, then the current address is set to this line. +Otherwise the current address is set to the line before the deleted +range. + +@item e @var{file} +Edits @var{file}, and sets the default filename. If @var{file} is not +specified, then the default filename is used. Any lines in the buffer +are deleted before the new file is read. The current address is set to +the last line read. + +@item e !@var{command} +Edits the standard output of @samp{!@var{command}}, (see the @samp{!} +command below). The default filename is unchanged. Any lines in the +buffer are deleted before the output of @var{command} is read. The +current address is set to the last line read. + +@item E @var{file} +Edits @var{file} unconditionally. This is similar to the @samp{e} +command, except that unwritten changes are discarded without warning. +The current address is set to the last line read. + +@item f @var{file} +Sets the default filename to @var{file}. If @var{file} is not specified, +then the default unescaped filename is printed. + +@item (1,$)g /@var{re}/@var{command-list} +Global command. Applies @var{command-list} to each of the addressed +lines matching a regular expression @var{re}. The current address is set +to the line currently matched before @var{command-list} is executed. At +the end of the @samp{g} command, the current address is set to the last +line affected by @var{command-list}. + +At least the first command of @var{command-list} must appear on the same +line as the @samp{g} command. All lines of a multi-line +@var{command-list} except the last line must be terminated with a +backslash (@samp{\}). Any commands are allowed, except for @samp{g}, +@samp{G}, @samp{v}, and @samp{V}. By default, a newline alone in +@var{command-list} is equivalent to a @samp{p} command. If @command{ed} +is invoked with the command-line option @samp{-G}, then a newline in +@var{command-list} is equivalent to a @samp{.+1p} command. + +@item (1,$)G /@var{re}/ +Interactive global command. Interactively edits the addressed lines +matching a regular expression @var{re}. For each matching line, the line +is printed, the current address is set, and the user is prompted to +enter a @var{command-list}. At the end of the @samp{G} command, the +current address is set to the last line affected by (the last) +@var{command-list}. + +The format of @var{command-list} is the same as that of the @samp{g} +command. A newline alone acts as a null command list. A single @samp{&} +repeats the last non-null command list. + +@item H +Toggles the printing of error explanations. By default, explanations are +not printed. It is recommended that ed scripts begin with this command +to aid in debugging. + +@item h +Prints an explanation of the last error. + +@item (.)i +Inserts text in the buffer before the current line. The address @samp{0} +(zero) is valid for this command; it is equivalent to address @samp{1}. +Text is entered in input mode. The current address is set to the last +line entered. + +@item (.,.+1)j +Joins the addressed lines. The addressed lines are deleted from the +buffer and replaced by a single line containing their joined text. The +current address is set to the resultant line. + +@item (.)kx +Marks a line with a lower case letter @samp{x}. The line can then be +addressed as @samp{'x} (i.e., a single quote followed by @samp{x}) in +subsequent commands. The mark is not cleared until the line is deleted +or otherwise modified. + +@item (.,.)l +Prints the addressed lines unambiguously. The end of each line is marked +with a @samp{$}, and every @samp{$} character within the text is printed +with a preceding backslash. The current address is set to the last line +printed. + +@item (.,.)m(.) +Moves lines in the buffer. The addressed lines are moved to after the +right-hand destination address, which may be the address @samp{0} +(zero). The current address is set to the new address of the last line +moved. + +@item (.,.)n +Prints the addressed lines, preceding each line by its line number and a +@key{tab}. The current address is set to the last line printed. + +@item (.,.)p +Prints the addressed lines. The current address is set to the last line +printed. + +@item P +Toggles the command prompt on and off. Unless a prompt is specified with +command-line option @samp{-p}, the command prompt is by default turned +off. + +@item q +Quits @command{ed}. + +@item Q +Quits @command{ed} unconditionally. This is similar to the @code{q} +command, except that unwritten changes are discarded without warning. + +@item ($)r @var{file} +Reads @var{file} to after the addressed line. If @var{file} is not +specified, then the default filename is used. If there is no default +filename prior to the command, then the default filename is set to +@var{file}. Otherwise, the default filename is unchanged. The current +address is set to the last line read. + +@item ($)r !@var{command} +Reads to after the addressed line the standard output of +@samp{!command}, (see the @samp{!} command below). The default filename +is unchanged. The current address is set to the last line read. + +@item (.,.)s /@var{re}/@var{replacement}/ +@itemx (.,.)s /@var{re}/@var{replacement}/g +@itemx (.,.)s /@var{re}/@var{replacement}/@var{n} +Replaces text in the addressed lines matching a regular expression +@var{re} with @var{replacement}. By default, only the first match in +each line is replaced. If the @samp{g} (global) suffix is given, then +every match is replaced. The @var{n} suffix, where @var{n} is a postive +number, causes only the @var{n}th match to be replaced. It is an error +if no substitutions are performed on any of the addressed lines. The +current address is set to the last line affected. + +@var{re} and @var{replacement} may be delimited by any character other +than @key{space}, @key{newline} and the characters used by the form of +the @samp{s} command shown below. If one or two of the last delimiters +is omitted, then the last line affected is printed as if the print +suffix @samp{p} were specified. + +An unescaped @samp{&} in @var{replacement} is replaced by the currently +matched text. The character sequence @samp{\@var{m}} where @var{m} is a +number in the range [1,9], is replaced by the @var{m}th backreference +expression of the matched text. If @var{replacement} consists of a +single @samp{%}, then @var{replacement} from the last substitution is +used. Newlines may be embedded in @var{replacement} if they are escaped +with a backslash (@samp{\}). + +@item (.,.)s +Repeats the last substitution. This form of the @samp{s} command accepts +a count suffix @var{n}, and any combination of the characters @samp{r}, +@samp{g}, and @samp{p}. If a count suffix @var{n} is given, then only +the @var{n}th match is replaced. The @samp{r} suffix causes the regular +expression of the last search to be used instead of the that of the last +substitution. The @samp{g} suffix toggles the global suffix of the last +substitution. The @samp{p} suffix toggles the print suffix of the last +substitution. The current address is set to the last line affected. + +@item (.,.)t(.) +Copies (i.e., transfers) the addressed lines to after the right-hand +destination address, which may be the address @samp{0} (zero). The +current address is set to the last line copied. + +@item u +Undoes the last command and restores the current address to what it was +before the command. The global commands @samp{g}, @samp{G}, @samp{v}, +and @samp{V} are treated as a single command by undo. @samp{u} is its +own inverse. + +@item (1,$)v /@var{re}/@var{command-list} +This is similar to the @samp{g} command except that it applies +@var{command-list} to each of the addressed lines not matching the +regular expression @var{re}. + +@item (1,$)V /@var{re}/ +This is similar to the @samp{G} command except that it interactively +edits the addressed lines not matching the regular expression @var{re}. + +@item (1,$)w @var{file} +Writes the addressed lines to @var{file}. Any previous contents of +@var{file} is lost without warning. If there is no default filename, +then the default filename is set to @var{file}, otherwise it is +unchanged. If no filename is specified, then the default filename is +used. The current address is unchanged. + +@item (1,$)w !@var{command} +Writes the addressed lines to the standard input of +@samp{!@var{command}}, (see the @samp{!} command below). The default +filename and current address are unchanged. + +@item (1,$)wq @var{file} +Writes the addressed lines to @var{file}, and then executes a @samp{q} +command. + +@item (1,$)W @var{file} +Appends the addressed lines to the end of @var{file}. This is similar to +the @samp{w} command, expect that the previous contents of file is not +clobbered. The current address is unchanged. + +@item (.)x +Copies (puts) the contents of the cut buffer to after the addressed +line. The current address is set to the last line copied. + +@item (.,.)y +Copies (yanks) the addressed lines to the cut buffer. The cut buffer is +overwritten by subsequent @samp{y}, @samp{s}, @samp{j}, @samp{d}, or +@samp{c} commands. The current address is unchanged. + +@item (.+1)z @var{n} +Scrolls @var{n} lines at a time starting at addressed line. If @var{n} +is not specified, then the current window size is used. The current +address is set to the last line printed. + +@item !@var{command} +Executes @var{command} via @command{sh (1)}. If the first character of +@var{command} is @samp{!}, then it is replaced by text of the previous +@samp{!@var{command}}. @command{ed} does not process @var{command} for +backslash (@samp{\}) escapes. However, an unescaped @samp{%} is replaced +by the default filename. When the shell returns from execution, a +@samp{!} is printed to the standard output. The current line is +unchanged. + +@item (.,.)# +Begins a comment; the rest of the line, up to a newline, is ignored. If +a line address followed by a semicolon is given, then the current +address is set to that address. Otherwise, the current address is +unchanged. + +@item ($)= +Prints the line number of the addressed line. + +@item (.+1)@key{newline} +An address alone prints the addressed line. A @key{newline} alone is +equivalent to @samp{+1p}. the current address is set to the address of +the printed line. + +@end table + + +@node Limitations +@chapter Limitations + +If the terminal hangs up, @command{ed} attempts to write the buffer to +file @file{ed.hup}. + +@command{ed} processes @var{file} arguments for backslash escapes, i.e., +in a filename, any characters preceded by a backslash (@samp{\}) are +interpreted literally. + +If a text (non-binary) file is not terminated by a newline character, +then @command{ed} appends one on reading/writing it. In the case of a +binary file, @command{ed} does not append a newline on reading/writing. + +Per line overhead: 4 @code{int}s. + + +@node Diagnostics +@chapter Diagnostics + +When an error occurs, if @command{ed}'s input is from a regular file or +here document, then it exits, otherwise it prints a @samp{?} and returns +to command mode. An explanation of the last error can be printed with +the @samp{h} (help) command. + +If the @samp{u} (undo) command occurs in a global command list, then the +command list is executed only once. + +Attempting to quit @command{ed} or edit another file before writing a +modified buffer results in an error. If the command is entered a second +time, it succeeds, but any changes to the buffer are lost. + +@command{ed} exits with 0 if no errors occurred; otherwise >0. + + +@node Problems +@chapter Reporting Bugs + +There are probably bugs in @command{ed}. There are certainly errors and +omissions in this manual. If you report them, they will get fixed. If +you don't, no one will ever know about them and they will remain unfixed +for all eternity, if not longer. + +If you find a bug in @command{ed}, please send electronic mail to +@email{bug-ed@@gnu.org}. Include the version number, which you can +find by running @w{@samp{@command{ed} --version}}. + + +@node GNU Free Documentation License +@chapter GNU Free Documentation License +@include fdl.texinfo + +@bye diff --git a/doc/fdl.texinfo b/doc/fdl.texinfo new file mode 100644 index 0000000..8805f1a --- /dev/null +++ b/doc/fdl.texinfo @@ -0,0 +1,506 @@ +@c The GNU Free Documentation License. +@center Version 1.3, 3 November 2008 + +@c This file is intended to be included within another document, +@c hence no sectioning command or @node. + +@display +Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. +@uref{http://fsf.org/} + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. +@end display + +@enumerate 0 +@item +PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document @dfn{free} in the sense of freedom: to +assure everyone the effective freedom to copy and redistribute it, +with or without modifying it, either commercially or noncommercially. +Secondarily, this License preserves for the author and publisher a way +to get credit for their work, while not being considered responsible +for modifications made by others. + +This License is a kind of ``copyleft'', which means that derivative +works of the document must themselves be free in the same sense. It +complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for free +software, because free software needs free documentation: a free +program should come with manuals providing the same freedoms that the +software does. But this License is not limited to software manuals; +it can be used for any textual work, regardless of subject matter or +whether it is published as a printed book. We recommend this License +principally for works whose purpose is instruction or reference. + +@item +APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, that +contains a notice placed by the copyright holder saying it can be +distributed under the terms of this License. Such a notice grants a +world-wide, royalty-free license, unlimited in duration, to use that +work under the conditions stated herein. The ``Document'', below, +refers to any such manual or work. Any member of the public is a +licensee, and is addressed as ``you''. You accept the license if you +copy, modify or distribute the work in a way requiring permission +under copyright law. + +A ``Modified Version'' of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A ``Secondary Section'' is a named appendix or a front-matter section +of the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall +subject (or to related matters) and contains nothing that could fall +directly within that overall subject. (Thus, if the Document is in +part a textbook of mathematics, a Secondary Section may not explain +any mathematics.) The relationship could be a matter of historical +connection with the subject or with related matters, or of legal, +commercial, philosophical, ethical or political position regarding +them. + +The ``Invariant Sections'' are certain Secondary Sections whose titles +are designated, as being those of Invariant Sections, in the notice +that says that the Document is released under this License. If a +section does not fit the above definition of Secondary then it is not +allowed to be designated as Invariant. The Document may contain zero +Invariant Sections. If the Document does not identify any Invariant +Sections then there are none. + +The ``Cover Texts'' are certain short passages of text that are listed, +as Front-Cover Texts or Back-Cover Texts, in the notice that says that +the Document is released under this License. A Front-Cover Text may +be at most 5 words, and a Back-Cover Text may be at most 25 words. + +A ``Transparent'' copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed of +pixels) generic paint programs or (for drawings) some widely available +drawing editor, and that is suitable for input to text formatters or +for automatic translation to a variety of formats suitable for input +to text formatters. A copy made in an otherwise Transparent file +format whose markup, or absence of markup, has been arranged to thwart +or discourage subsequent modification by readers is not Transparent. +An image format is not Transparent if used for any substantial amount +of text. A copy that is not ``Transparent'' is called ``Opaque''. + +Examples of suitable formats for Transparent copies include plain +@sc{ascii} without markup, Texinfo input format, La@TeX{} input +format, @acronym{SGML} or @acronym{XML} using a publicly available +@acronym{DTD}, and standard-conforming simple @acronym{HTML}, +PostScript or @acronym{PDF} designed for human modification. Examples +of transparent image formats include @acronym{PNG}, @acronym{XCF} and +@acronym{JPG}. Opaque formats include proprietary formats that can be +read and edited only by proprietary word processors, @acronym{SGML} or +@acronym{XML} for which the @acronym{DTD} and/or processing tools are +not generally available, and the machine-generated @acronym{HTML}, +PostScript or @acronym{PDF} produced by some word processors for +output purposes only. + +The ``Title Page'' means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the material +this License requires to appear in the title page. For works in +formats which do not have any title page as such, ``Title Page'' means +the text near the most prominent appearance of the work's title, +preceding the beginning of the body of the text. + +The ``publisher'' means any person or entity that distributes copies +of the Document to the public. + +A section ``Entitled XYZ'' means a named subunit of the Document whose +title either is precisely XYZ or contains XYZ in parentheses following +text that translates XYZ in another language. (Here XYZ stands for a +specific section name mentioned below, such as ``Acknowledgements'', +``Dedications'', ``Endorsements'', or ``History''.) To ``Preserve the Title'' +of such a section when you modify the Document means that it remains a +section ``Entitled XYZ'' according to this definition. + +The Document may include Warranty Disclaimers next to the notice which +states that this License applies to the Document. These Warranty +Disclaimers are considered to be included by reference in this +License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and has +no effect on the meaning of this License. + +@item +VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License applies +to the Document are reproduced in all copies, and that you add no other +conditions whatsoever to those of this License. You may not use +technical measures to obstruct or control the reading or further +copying of the copies you make or distribute. However, you may accept +compensation in exchange for copies. If you distribute a large enough +number of copies you must also follow the conditions in section 3. + +You may also lend copies, under the same conditions stated above, and +you may publicly display copies. + +@item +COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly have +printed covers) of the Document, numbering more than 100, and the +Document's license notice requires Cover Texts, you must enclose the +copies in covers that carry, clearly and legibly, all these Cover +Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on +the back cover. Both covers must also clearly and legibly identify +you as the publisher of these copies. The front cover must present +the full title with all words of the title equally prominent and +visible. You may add other material on the covers in addition. +Copying with changes limited to the covers, as long as they preserve +the title of the Document and satisfy these conditions, can be treated +as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto adjacent +pages. + +If you publish or distribute Opaque copies of the Document numbering +more than 100, you must either include a machine-readable Transparent +copy along with each Opaque copy, or state in or with each Opaque copy +a computer-network location from which the general network-using +public has access to download using public-standard network protocols +a complete Transparent copy of the Document, free of added material. +If you use the latter option, you must take reasonably prudent steps, +when you begin distribution of Opaque copies in quantity, to ensure +that this Transparent copy will remain thus accessible at the stated +location until at least one year after the last time you distribute an +Opaque copy (directly or through your agents or retailers) of that +edition to the public. + +It is requested, but not required, that you contact the authors of the +Document well before redistributing any large number of copies, to give +them a chance to provide you with an updated version of the Document. + +@item +MODIFICATIONS + +You may copy and distribute a Modified Version of the Document under +the conditions of sections 2 and 3 above, provided that you release +the Modified Version under precisely this License, with the Modified +Version filling the role of the Document, thus licensing distribution +and modification of the Modified Version to whoever possesses a copy +of it. In addition, you must do these things in the Modified Version: + +@enumerate A +@item +Use in the Title Page (and on the covers, if any) a title distinct +from that of the Document, and from those of previous versions +(which should, if there were any, be listed in the History section +of the Document). You may use the same title as a previous version +if the original publisher of that version gives permission. + +@item +List on the Title Page, as authors, one or more persons or entities +responsible for authorship of the modifications in the Modified +Version, together with at least five of the principal authors of the +Document (all of its principal authors, if it has fewer than five), +unless they release you from this requirement. + +@item +State on the Title page the name of the publisher of the +Modified Version, as the publisher. + +@item +Preserve all the copyright notices of the Document. + +@item +Add an appropriate copyright notice for your modifications +adjacent to the other copyright notices. + +@item +Include, immediately after the copyright notices, a license notice +giving the public permission to use the Modified Version under the +terms of this License, in the form shown in the Addendum below. + +@item +Preserve in that license notice the full lists of Invariant Sections +and required Cover Texts given in the Document's license notice. + +@item +Include an unaltered copy of this License. + +@item +Preserve the section Entitled ``History'', Preserve its Title, and add +to it an item stating at least the title, year, new authors, and +publisher of the Modified Version as given on the Title Page. If +there is no section Entitled ``History'' in the Document, create one +stating the title, year, authors, and publisher of the Document as +given on its Title Page, then add an item describing the Modified +Version as stated in the previous sentence. + +@item +Preserve the network location, if any, given in the Document for +public access to a Transparent copy of the Document, and likewise +the network locations given in the Document for previous versions +it was based on. These may be placed in the ``History'' section. +You may omit a network location for a work that was published at +least four years before the Document itself, or if the original +publisher of the version it refers to gives permission. + +@item +For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve +the Title of the section, and preserve in the section all the +substance and tone of each of the contributor acknowledgements and/or +dedications given therein. + +@item +Preserve all the Invariant Sections of the Document, +unaltered in their text and in their titles. Section numbers +or the equivalent are not considered part of the section titles. + +@item +Delete any section Entitled ``Endorsements''. Such a section +may not be included in the Modified Version. + +@item +Do not retitle any existing section to be Entitled ``Endorsements'' or +to conflict in title with any Invariant Section. + +@item +Preserve any Warranty Disclaimers. +@end enumerate + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled ``Endorsements'', provided it contains +nothing but endorsements of your Modified Version by various +parties---for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + +@item +COMBINING DOCUMENTS + +You may combine the Document with other documents released under this +License, under the terms defined in section 4 above for modified +versions, provided that you include in the combination all of the +Invariant Sections of all of the original documents, unmodified, and +list them all as Invariant Sections of your combined work in its +license notice, and that you preserve all their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name but +different contents, make the title of each such section unique by +adding at the end of it, in parentheses, the name of the original +author or publisher of that section if known, or else a unique number. +Make the same adjustment to the section titles in the list of +Invariant Sections in the license notice of the combined work. + +In the combination, you must combine any sections Entitled ``History'' +in the various original documents, forming one section Entitled +``History''; likewise combine any sections Entitled ``Acknowledgements'', +and any sections Entitled ``Dedications''. You must delete all +sections Entitled ``Endorsements.'' + +@item +COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other documents +released under this License, and replace the individual copies of this +License in the various documents with a single copy that is included in +the collection, provided that you follow the rules of this License for +verbatim copying of each of the documents in all other respects. + +You may extract a single document from such a collection, and distribute +it individually under this License, provided you insert a copy of this +License into the extracted document, and follow this License in all +other respects regarding verbatim copying of that document. + +@item +AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other separate +and independent documents or works, in or on a volume of a storage or +distribution medium, is called an ``aggregate'' if the copyright +resulting from the compilation is not used to limit the legal rights +of the compilation's users beyond what the individual works permit. +When the Document is included in an aggregate, this License does not +apply to the other works in the aggregate which are not themselves +derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half of +the entire aggregate, the Document's Cover Texts may be placed on +covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic form. +Otherwise they must appear on printed covers that bracket the whole +aggregate. + +@item +TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of section 4. +Replacing Invariant Sections with translations requires special +permission from their copyright holders, but you may include +translations of some or all Invariant Sections in addition to the +original versions of these Invariant Sections. You may include a +translation of this License, and all the license notices in the +Document, and any Warranty Disclaimers, provided that you also include +the original English version of this License and the original versions +of those notices and disclaimers. In case of a disagreement between +the translation and the original version of this License or a notice +or disclaimer, the original version will prevail. + +If a section in the Document is Entitled ``Acknowledgements'', +``Dedications'', or ``History'', the requirement (section 4) to Preserve +its Title (section 1) will typically require changing the actual +title. + +@item +TERMINATION + +You may not copy, modify, sublicense, or distribute the Document +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense, or distribute it is void, and +will automatically terminate your rights under this License. + +However, if you cease all violation of this License, then your license +from a particular copyright holder is reinstated (a) provisionally, +unless and until the copyright holder explicitly and finally +terminates your license, and (b) permanently, if the copyright holder +fails to notify you of the violation by some reasonable means prior to +60 days after the cessation. + +Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + +Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, receipt of a copy of some or all of the same material does +not give you any rights to use it. + +@item +FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions +of the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +@uref{http://www.gnu.org/copyleft/}. + +Each version of the License is given a distinguishing version number. +If the Document specifies that a particular numbered version of this +License ``or any later version'' applies to it, you have the option of +following the terms and conditions either of that specified version or +of any later version that has been published (not as a draft) by the +Free Software Foundation. If the Document does not specify a version +number of this License, you may choose any version ever published (not +as a draft) by the Free Software Foundation. If the Document +specifies that a proxy can decide which future versions of this +License can be used, that proxy's public statement of acceptance of a +version permanently authorizes you to choose that version for the +Document. + +@item +RELICENSING + +``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any +World Wide Web server that publishes copyrightable works and also +provides prominent facilities for anybody to edit those works. A +public wiki that anybody can edit is an example of such a server. A +``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the +site means any set of copyrightable works thus published on the MMC +site. + +``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0 +license published by Creative Commons Corporation, a not-for-profit +corporation with a principal place of business in San Francisco, +California, as well as future copyleft versions of that license +published by that same organization. + +``Incorporate'' means to publish or republish a Document, in whole or +in part, as part of another Document. + +An MMC is ``eligible for relicensing'' if it is licensed under this +License, and if all works that were first published under this License +somewhere other than this MMC, and subsequently incorporated in whole +or in part into the MMC, (1) had no cover texts or invariant sections, +and (2) were thus incorporated prior to November 1, 2008. + +The operator of an MMC Site may republish an MMC contained in the site +under CC-BY-SA on the same site at any time before August 1, 2009, +provided the MMC is eligible for relicensing. + +@end enumerate + +@page +@heading ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + +@smallexample +@group + Copyright (C) @var{year} @var{your name}. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. +@end group +@end smallexample + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the ``with@dots{}Texts.'' line with this: + +@smallexample +@group + with the Invariant Sections being @var{list their titles}, with + the Front-Cover Texts being @var{list}, and with the Back-Cover Texts + being @var{list}. +@end group +@end smallexample + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, +to permit their use in free software. + +@c Local Variables: +@c ispell-local-pdict: "ispell-dict" +@c End: + diff --git a/ed.h b/ed.h new file mode 100644 index 0000000..aaed957 --- /dev/null +++ b/ed.h @@ -0,0 +1,142 @@ +/* Global declarations for the ed editor. */ +/* GNU ed - The GNU line editor. + Copyright (C) 1993, 1994 Andrew Moore, Talke Studio + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +enum Gflags + { + GLB = 0x01, /* global command */ + GLS = 0x02, /* list after command */ + GNP = 0x04, /* enumerate after command */ + GPR = 0x08, /* print after command */ + GSG = 0x10 /* global substitute */ + }; + + +typedef struct line /* Line node */ + { + struct line *q_forw; + struct line *q_back; + long pos; /* position of text in scratch buffer */ + int len; /* length of line */ + } +line_t; + + +typedef struct + { + enum { UADD = 0, UDEL = 1, UMOV = 2, VMOV = 3 } type; + line_t *head; /* head of list */ + line_t *tail; /* tail of list */ + } +undo_t; + +#ifndef max +#define max( a,b ) ( (( a ) > ( b )) ? ( a ) : ( b ) ) +#endif +#ifndef min +#define min( a,b ) ( (( a ) < ( b )) ? ( a ) : ( b ) ) +#endif + + +/* defined in buffer.c */ +char append_lines( const char *ibufp, const int addr, const char isglobal ); +char close_sbuf( void ); +char copy_lines( const int first_addr, const int second_addr, const int addr ); +int current_addr( void ); +int dec_addr( int addr ); +char delete_lines( const int from, const int to, const char isglobal ); +int get_line_node_addr( const line_t *lp ); +char *get_sbuf_line( const line_t *lp ); +int inc_addr( int addr ); +int inc_current_addr( void ); +char init_buffers( void ); +char isbinary( void ); +char join_lines( const int from, const int to, const char isglobal ); +int last_addr( void ); +char modified( void ); +char move_lines( const int first_addr, const int second_addr, const int addr, + const char isglobal ); +char newline_added( void ); +char open_sbuf( void ); +int path_max( const char *filename ); +char put_lines( const int addr ); +const char *put_sbuf_line( const char *cs, const int addr ); +line_t *search_line_node( const int n ); +void set_binary( void ); +void set_current_addr( const int addr ); +void set_modified( const char m ); +void set_newline_added( void ); +char yank_lines( const int from, const int to ); +void clear_undo_stack( void ); +undo_t *push_undo_atom( const int type, const int from, const int to ); +void reset_undo_state( void ); +char undo( const char isglobal ); + +/* defined in global.c */ +void clear_active_list( void ); +const line_t *next_active_node( void ); +char set_active_node( const line_t *lp ); +void unset_active_nodes( const line_t *np, const line_t *mp ); + +/* defined in io.c */ +char display_lines( int from, const int to, const int gflags ); +const char *get_extended_line( const char *ibufp, int *lenp, const char nonl ); +const char *get_tty_line( int *lenp ); +int read_file( const char *filename, const int addr ); +int write_file( const char * const filename, const char * const mode, + const int from, const int to ); + +/* defined in main.c */ +char is_regular_file( int fd ); +char may_access_filename( const char *name ); +char restricted( void ); +char scripted( void ); +void show_strerror( const char *filename, int errcode ); +char traditional( void ); + +/* defined in main_loop.c */ +int main_loop( const char loose ); +void set_def_filename( const char *s ); +void set_error_msg( const char *msg ); +void set_prompt( const char *s ); +void set_verbose( void ); +void unmark_line_node( const line_t *lp ); + +/* defined in regex.c */ +char build_active_list( const char **ibufpp, const int first_addr, + const int second_addr, const char match ); +char extract_subst_tail( const char **ibufpp, int *gflagsp, int *snump, + const char isglobal ); +int get_matching_node_addr( const char **ibufpp, const char forward ); +char new_compiled_pattern( const char **ibufpp ); +char prev_pattern( void ); +char search_and_replace( const int first_addr, const int second_addr, + const int gflags, const int snum, const char isglobal ); + +/* defined in signal.c */ +void disable_interrupts( void ); +void enable_interrupts( void ); +char parse_int( int *i, const char *str, const char **tail ); +char resize_buffer( char **buf, int *size, int min_size ); +char resize_line_buffer( const line_t ***buf, int *size, int min_size ); +char resize_undo_buffer( undo_t **buf, int *size, int min_size ); +void set_signals( void ); +void set_window_lines( const int lines ); +const char *strip_escapes( const char *s ); +int window_columns( void ); +int window_lines( void ); diff --git a/global.c b/global.c new file mode 100644 index 0000000..2a71e58 --- /dev/null +++ b/global.c @@ -0,0 +1,88 @@ +/* global.c: global command routines for the ed line editor */ +/* GNU ed - The GNU line editor. + Copyright (C) 1993, 1994 Andrew Moore, Talke Studio + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include +#include + +#include "ed.h" + + +static const line_t **active_list = 0; /* list of lines active in a global command */ +static int active_size = 0; /* size (in bytes) of active_list */ +static int active_len = 0; /* number of lines in active_list */ +static int active_ptr = 0; /* active_list index ( non-decreasing ) */ +static int active_ndx = 0; /* active_list index ( modulo active_last ) */ + + +/* clear the global-active list */ +void clear_active_list( void ) + { + disable_interrupts(); + if( active_list ) free( active_list ); + active_list = 0; + active_size = active_len = active_ptr = active_ndx = 0; + enable_interrupts(); + } + + +/* return the next global-active line node */ +const line_t *next_active_node( void ) + { + while( active_ptr < active_len && !active_list[active_ptr] ) + ++active_ptr; + return ( active_ptr < active_len ) ? active_list[active_ptr++] : 0; + } + + +/* add a line node to the global-active list */ +char set_active_node( const line_t *lp ) + { + disable_interrupts(); + if( !resize_line_buffer( &active_list, &active_size, + ( active_len + 1 ) * sizeof( line_t ** ) ) ) + { + show_strerror( 0, errno ); set_error_msg( "Memory exhausted" ); + enable_interrupts(); + return 0; + } + enable_interrupts(); + active_list[active_len++] = lp; + return 1; + } + + +/* remove a range of lines from the global-active list */ +void unset_active_nodes( const line_t *np, const line_t *mp ) + { + const line_t *lp = np; + + while( lp != mp ) + { + int i; + for( i = 0; i < active_len; ++i ) + { + if( ++active_ndx >= active_len ) active_ndx = 0; + if( active_list[active_ndx] == lp ) + { active_list[active_ndx] = 0; break; } + } + lp = lp->q_forw; + } + } diff --git a/io.c b/io.c new file mode 100644 index 0000000..cce8155 --- /dev/null +++ b/io.c @@ -0,0 +1,312 @@ +/* io.c: i/o routines for the ed line editor */ +/* GNU ed - The GNU line editor. + Copyright (C) 1993, 1994 Andrew Moore, Talke Studio + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include + +#include "ed.h" + + +/* print text to stdout */ +static char put_tty_line( const char *s, int len, const int gflags ) + { + const char escapes[] = "\a\b\f\n\r\t\v\\"; + const char escchars[] = "abfnrtv\\"; + int col = 0; + + if( gflags & GNP ) { printf( "%d\t", current_addr() ); col = 8; } + while( --len >= 0 ) + { + const unsigned char ch = *s++; + if( !( gflags & GLS ) ) putchar( ch ); + else + { + if( ++col > window_columns() ) { col = 1; fputs( "\\\n", stdout ); } + if( ch >= 32 && ch <= 126 && ch != '\\' ) putchar( ch ); + else + { + char *cp = strchr( escapes, ch ); + ++col; putchar('\\'); + if( cp ) putchar( escchars[cp-escapes] ); + else + { + col += 2; + putchar( ( ( ch >> 6 ) & 7 ) + '0' ); + putchar( ( ( ch >> 3 ) & 7 ) + '0' ); + putchar( ( ch & 7 ) + '0' ); + } + } + } + } + if( !traditional() && ( gflags & GLS ) ) putchar('$'); + putchar('\n'); + return 1; + } + + +/* print a range of lines to stdout */ +char display_lines( int from, const int to, const int gflags ) + { + line_t *ep = search_line_node( inc_addr( to ) ); + line_t *bp = search_line_node( from ); + + if( !from ) { set_error_msg( "Invalid address" ); return 0; } + while( bp != ep ) + { + char *s = get_sbuf_line( bp ); + if( !s ) return 0; + set_current_addr( from++ ); + if( !put_tty_line( s, bp->len, gflags ) ) return 0; + bp = bp->q_forw; + } + return 1; + } + + +/* return the parity of escapes at the end of a string */ +static char trailing_escape( const char * const s, int len ) + { + char parity = 0; + while( --len >= 0 && s[len] == '\\' ) parity = !parity; + return parity; + } + + +/* get an extended line from stdin */ +const char *get_extended_line( const char *ibufp, int *lenp, const char nonl ) + { + static char *buf = 0; + static int bufsz = 0; + int len; + + for( len = 0; ibufp[len++] != '\n'; ) ; + if( len < 2 || !trailing_escape( ibufp, len - 1 ) ) + { if( lenp ) *lenp = len; return ibufp; } + if( !resize_buffer( &buf, &bufsz, len ) ) return 0; + memcpy( buf, ibufp, len ); + --len; buf[len-1] = '\n'; /* strip trailing esc */ + if( nonl ) --len; /* strip newline */ + while( 1 ) + { + int len2; + if( !( ibufp = get_tty_line( &len2 ) ) ) return 0; + if( len2 == 0 || ibufp[len2-1] != '\n' ) + { set_error_msg( "Unexpected end-of-file" ); return 0; } + if( !resize_buffer( &buf, &bufsz, len + len2 ) ) return 0; + memcpy( buf + len, ibufp, len2 ); + len += len2; + if( len2 < 2 || !trailing_escape( buf, len - 1 ) ) break; + --len; buf[len-1] = '\n'; /* strip trailing esc */ + if( nonl ) --len; /* strip newline */ + } + if( !resize_buffer( &buf, &bufsz, len + 1 ) ) return 0; + buf[len] = 0; + if( lenp ) *lenp = len; + return buf; + } + + +/* read a line of text from stdin; return pointer to buffer and line length */ +const char *get_tty_line( int *lenp ) + { + static char *buf = 0; + static int bufsz = 0; + int i = 0, oi = -1; + + while( 1 ) + { + const int c = getchar(); + if( c == EOF ) + { + if( ferror( stdin ) ) + { + show_strerror( "stdin", errno ); set_error_msg( "Cannot read stdin" ); + clearerr( stdin ); if( lenp ) *lenp = 0; + return 0; + } + else + { + clearerr( stdin ); if( i != oi ) { oi = i; continue; } + if( i ) buf[i] = 0; if( lenp ) *lenp = i; + return buf; + } + } + else + { + if( !resize_buffer( &buf, &bufsz, i + 2 ) ) + { if( lenp ) *lenp = 0; return 0; } + buf[i++] = c; if( !c ) set_binary(); if( c != '\n' ) continue; + buf[i] = 0; if( lenp ) *lenp = i; + return buf; + } + } + } + + +/* read a line of text from a stream */ +static const char * read_stream_line( FILE *fp, int *lenp, char *newline_added_now ) + { + static char *buf = 0; + static int bufsz = 0; + int c, i = 0; + + while( 1 ) + { + if( !resize_buffer( &buf, &bufsz, i + 2 ) ) return 0; + c = getc( fp ); if( c == EOF ) break; + buf[i++] = c; + if( !c ) set_binary(); else if( c == '\n' ) break; + } + buf[i] = 0; + if( c == EOF ) + { + if( ferror( fp ) ) + { + show_strerror( 0, errno ); + set_error_msg( "Cannot read input file" ); + return 0; + } + else if( i ) + { + buf[i] = '\n'; buf[i+1] = 0; *newline_added_now = 1; + if( !isbinary() ) ++i; + } + } + *lenp = i; + return buf; + } + + +/* read a stream into the editor buffer; return size of data read */ +static long read_stream( FILE *fp, const int addr ) + { + line_t *lp = search_line_node( addr ); + undo_t *up = 0; + long size = 0; + const char o_isbinary = isbinary(); + const char appended = ( addr == last_addr() ); + char newline_added_now = 0; + + set_current_addr( addr ); + while( 1 ) + { + int len = 0; + const char *buf = read_stream_line( fp, &len, &newline_added_now ); + if( !buf ) return -1; + if( len > 0 ) size += len; else break; + disable_interrupts(); + if( !put_sbuf_line( buf, current_addr() ) ) + { enable_interrupts(); return -1; } + lp = lp->q_forw; + if( up ) up->tail = lp; + else if( !( up = push_undo_atom( UADD, -1, -1 ) ) ) + { enable_interrupts(); return -1; } + enable_interrupts(); + } + if( addr && appended && size && o_isbinary && newline_added() ) + fputs( "Newline inserted\n", stderr ); + else if( newline_added_now && appended ) + fputs( "Newline appended\n", stderr ); + if( isbinary() && !o_isbinary && newline_added_now && !appended ) ++size; + if( !size ) newline_added_now = 1; + if( appended && newline_added_now ) set_newline_added(); + return size; + } + + +/* read a named file/pipe into the buffer; return line count */ +int read_file( const char *filename, const int addr ) + { + FILE *fp; + long size; + + if( *filename == '!' ) fp = popen( filename + 1, "r" ); + else fp = fopen( strip_escapes( filename ), "r" ); + if( !fp ) + { + show_strerror( filename, errno ); + set_error_msg( "Cannot open input file" ); + return -1; + } + if( ( size = read_stream( fp, addr ) ) < 0 ) return -1; + if( ( (*filename == '!' ) ? pclose( fp ) : fclose( fp ) ) < 0 ) + { + show_strerror( filename, errno ); + set_error_msg( "Cannot close input file" ); + return -1; + } + if( !scripted() ) fprintf( stderr, "%lu\n", size ); + return current_addr() - addr; + } + + +/* write a range of lines to a stream */ +static long write_stream( FILE *fp, int from, const int to ) + { + line_t *lp = search_line_node( from ); + long size = 0; + + while( from && from <= to ) + { + int len; + char *s = get_sbuf_line( lp ); + if( !s ) return -1; + len = lp->len; + if( from != last_addr() || !isbinary() || !newline_added() ) + s[len++] = '\n'; + size += len; + while( --len >= 0 ) + if( fputc( *s++, fp ) < 0 ) + { + show_strerror( 0, errno ); + set_error_msg( "Cannot write file" ); + return -1; + } + ++from; lp = lp->q_forw; + } + return size; + } + + +/* write a range of lines to a named file/pipe; return line count */ +int write_file( const char * const filename, const char * const mode, + const int from, const int to ) + { + FILE *fp; + long size; + + if( *filename == '!' ) fp = popen( filename + 1, "w" ); + else fp = fopen( strip_escapes( filename ), mode ); + if( !fp ) + { + show_strerror( filename, errno ); + set_error_msg( "Cannot open output file" ); + return -1; + } + if( ( size = write_stream( fp, from, to ) ) < 0 ) return -1; + if( ( (*filename == '!' ) ? pclose( fp ) : fclose( fp ) ) < 0 ) + { + show_strerror( filename, errno ); + set_error_msg( "Cannot close output file" ); + return -1; + } + if( !scripted() ) fprintf( stderr, "%lu\n", size ); + return ( from && from <= to ) ? to - from + 1 : 0; + } diff --git a/main.c b/main.c new file mode 100644 index 0000000..069bce1 --- /dev/null +++ b/main.c @@ -0,0 +1,199 @@ +/* GNU ed - The GNU line editor. + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ +/* + Return values: 0 for a normal exit, 1 for environmental problems + (file not found, invalid flags, I/O errors, etc), 2 to indicate a + corrupt or invalid input file, 3 for an internal consistency error + (eg, bug) which caused ed to panic. +*/ +/* + * CREDITS + * + * This program is based on the editor algorithm described in + * Brian W. Kernighan and P. J. Plauger's book "Software Tools + * in Pascal," Addison-Wesley, 1981. + * + * The buffering algorithm is attributed to Rodney Ruddock of + * the University of Guelph, Guelph, Ontario. + * + */ + +#include +#include +#include +#include +#include + +#include "carg_parser.h" +#include "ed.h" + + +static const char * invocation_name = 0; +static const char * const Program_name = "GNU Ed"; +static const char * const program_name = "ed"; +static const char * const program_year = "2009"; + +static char restricted_ = 0; /* invoked as "red" */ +static char scripted_ = 0; /* if set, suppress diagnostics */ +static char traditional_ = 0; /* if set, be backwards compatible */ + + +char restricted( void ) { return restricted_; } +char scripted( void ) { return scripted_; } +char traditional( void ) { return traditional_; } + + +static void show_help( void ) + { + printf( "%s - The GNU line editor.\n", Program_name ); + printf( "\nUsage: %s [options] [file]\n", invocation_name ); + printf( "\nOptions:\n" ); + printf( " -h, --help display this help and exit\n" ); + printf( " -V, --version output version information and exit\n" ); + printf( " -G, --traditional run in compatibility mode\n" ); + printf( " -l, --loose-exit-status exit with 0 status even if a command fails\n" ); + printf( " -p, --prompt=STRING use STRING as an interactive prompt\n" ); + printf( " -s, --quiet, --silent suppress diagnostics\n" ); + printf( " -v, --verbose be verbose\n" ); + printf( "Start edit by reading in `file' if given. Read output of shell command\n" ); + printf( "if `file' begins with a `!'.\n" ); + printf( "\nReport bugs to .\n" ); + printf( "Ed home page: http://www.gnu.org/software/ed/ed.html\n" ); + printf( "General help using GNU software: http://www.gnu.org/gethelp\n" ); + } + + +static void show_version( void ) + { + printf( "%s %s\n", Program_name, PROGVERSION ); + printf( "Copyright (C) 1994 Andrew L. Moore, %s Antonio Diaz Diaz.\n", program_year ); + printf( "License GPLv3+: GNU GPL version 3 or later \n" ); + printf( "This is free software: you are free to change and redistribute it.\n" ); + printf( "There is NO WARRANTY, to the extent permitted by law.\n" ); + } + + +void show_strerror( const char *filename, int errcode ) + { + if( !scripted_ ) + { + if( filename && filename[0] != 0 ) + fprintf( stderr, "%s: ", filename ); + fprintf( stderr, "%s\n", strerror( errcode ) ); + } + } + + +static void show_error( const char * msg, const int errcode, const char help ) + { + if( msg && msg[0] != 0 ) + { + fprintf( stderr, "%s: %s", program_name, msg ); + if( errcode > 0 ) fprintf( stderr, ": %s", strerror( errcode ) ); + fprintf( stderr, "\n" ); + } + if( help && invocation_name && invocation_name[0] != 0 ) + fprintf( stderr, "Try `%s --help' for more information.\n", invocation_name ); + } + + +/* return true if file descriptor is a regular file */ +char is_regular_file( int fd ) + { + struct stat sb; + return ( fstat( fd, &sb ) < 0 || S_ISREG( sb.st_mode ) ); + } + + +char may_access_filename( const char *name ) + { + if( restricted_ && ( *name == '!' || !strcmp( name, ".." ) || strchr( name, '/' ) ) ) + { + set_error_msg( "Shell access restricted" ); + return 0; + } + return 1; + } + + +int main( const int argc, const char *argv[] ) + { + int n = strlen( argv[0] ); + char loose = 0; + const ap_Option options[] = + { + { 'G', "traditional", ap_no }, + { 'h', "help", ap_no }, + { 'l', "loose-exit-status", ap_no }, + { 'p', "prompt", ap_yes }, + { 's', "quiet", ap_no }, + { 's', "silent", ap_no }, + { 'v', "verbose", ap_no }, + { 'V', "version", ap_no }, + { 0, 0, ap_no } }; + Arg_parser parser; + int argind; + + if( !ap_init( &parser, argc, argv, options, 0 ) ) + { show_error( "Memory exhausted", 0, 0 ); return 1; } + if( ap_error( &parser ) ) /* bad option */ + { show_error( ap_error( &parser ), 0, 1 ); return 1; } + invocation_name = argv[0]; + restricted_ = ( n > 2 && argv[0][n-3] == 'r' ); + + for( argind = 0; argind < ap_arguments( &parser ); ++argind ) + { + const int code = ap_code( &parser, argind ); + const char * arg = ap_argument( &parser, argind ); + if( !code ) break; /* no more options */ + switch( code ) + { + case 'G': traditional_ = 1; break; /* backward compatibility */ + case 'h': show_help(); return 0; + case 'l': loose = 1; break; + case 'p': set_prompt( arg ); break; + case 's': scripted_ = 1; break; + case 'v': set_verbose(); break; + case 'V': show_version(); return 0; + default: show_error( "internal_error: uncaught option", 0, 0 ); return 3; + } + } + setlocale( LC_ALL, "" ); + if( !init_buffers() ) return 1; + + while( argind < ap_arguments( &parser ) ) + { + const char * arg = ap_argument( &parser, argind ); + if( !strcmp( arg, "-" ) ) { scripted_ = 1; ++argind; continue; } + if( may_access_filename( arg ) ) + { + if( read_file( arg, 0 ) < 0 && is_regular_file( 0 ) ) + return 2; + else if( arg[0] != '!' ) set_def_filename( arg ); + } + else + { + fputs( "?\n", stderr ); + if( arg[0] ) set_error_msg( "Invalid filename" ); + if( is_regular_file( 0 ) ) return 2; + } + break; + } + ap_free( &parser ); + + return main_loop( loose ); + } diff --git a/main_loop.c b/main_loop.c new file mode 100644 index 0000000..24603b7 --- /dev/null +++ b/main_loop.c @@ -0,0 +1,730 @@ +/* GNU ed - The GNU line editor. + Copyright (C) 1993, 1994 Andrew Moore, Talke Studio + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include +#include +#include + +#include "ed.h" + + +enum Status { ERR = -2, EMOD = -3, FATAL = -4 }; + +static char def_filename[1024] = ""; /* default filename */ +static char errmsg[80] = ""; /* error message buffer */ +static char prompt_str[80] = "*"; /* command-line prompt */ +static const char *ibufp = 0; /* pointer to ed command-line buffer */ +static char *shcmd = 0; /* shell command buffer */ +static int shcmdsz = 0; /* shell command buffer size */ +static int shcmdlen = 0; /* shell command length */ +static int first_addr = 0, second_addr = 0; +static char verbose = 0; /* if set, print all error messages */ +static char prompt_on = 0; /* if set, show command-line prompt */ + + +void set_def_filename( const char *s ) + { + strncpy( def_filename, s, sizeof( def_filename ) ); + def_filename[sizeof(def_filename)-1] = 0; + } + +void set_prompt( const char *s ) + { + prompt_on = 1; + strncpy( prompt_str, s, sizeof( prompt_str ) ); + prompt_str[sizeof(prompt_str)-1] = 0; + } + +void set_verbose( void ) { verbose = 1; } + + +static const line_t *mark[26]; /* line markers */ +static int markno; /* line marker count */ + +static char mark_line_node( const line_t *lp, int c ) + { + c -= 'a'; + if( c < 0 || c >= 26 ) { set_error_msg( "Invalid mark character" ); return 0; } + if( !mark[c] ) ++markno; + mark[c] = lp; + return 1; + } + + +void unmark_line_node( const line_t *lp ) + { + int i; + for( i = 0; markno && i < 26; ++i ) + if( mark[i] == lp ) + { mark[i] = 0; --markno; } + } + + +/* return address of a marked line */ +static int get_marked_node_addr( int c ) + { + c -= 'a'; + if( c < 0 || c >= 26 ) + { set_error_msg( "Invalid mark character" ); return -1; } + return get_line_node_addr( mark[c]); + } + + +/* read a shell command from stdin; return substitution status ( -1, 0, +1 ) */ +static int get_shell_command( void ) + { + static char *buf = 0; + static int bufsz = 0; + const char *s; /* substitution char pointer */ + int i = 0, len; + + if( restricted() ) { set_error_msg( "Shell access restricted" ); return -1; } + s = ibufp = get_extended_line( ibufp, &len, 1 ); + if( !s ) return -1; + if( !resize_buffer( &buf, &bufsz, len + 1 ) ) return -1; + buf[i++] = '!'; /* prefix command w/ bang */ + while( *ibufp != '\n' ) + { + if( *ibufp == '!' ) + { + if( s != ibufp ) + { + if( !resize_buffer( &buf, &bufsz, i + 1 ) ) return -1; + buf[i++] = *ibufp++; + } + else if( !shcmd || ( traditional() && !*( shcmd + 1 ) ) ) + { set_error_msg( "No previous command" ); return -1; } + else + { + if( !resize_buffer( &buf, &bufsz, i + shcmdlen ) ) return -1; + for( s = shcmd + 1; s < shcmd + shcmdlen; ) buf[i++] = *s++; + s = ibufp++; + } + } + else if( *ibufp == '%' ) + { + if( !def_filename[0] ) + { set_error_msg( "No current filename" ); return -1; } + len = strlen( s = strip_escapes( def_filename ) ); + if( !resize_buffer( &buf, &bufsz, i + len ) ) return -1; + while( len-- ) buf[i++] = *s++; + s = ibufp++; + } + else + { + if( !resize_buffer( &buf, &bufsz, i + 2 ) ) return -1; + buf[i++] = *ibufp; + if( *ibufp++ == '\\' ) buf[i++] = *ibufp++; + } + } + if( !resize_buffer( &shcmd, &shcmdsz, i + 1 ) ) return -1; + memcpy( shcmd, buf, i ); + shcmdlen = i; shcmd[i] = 0; + return ( *s == '!' || *s == '%' ); + } + + +static const char *skip_blanks( const char *s ) + { + while( isspace( (unsigned char)*s ) && *s != '\n' ) ++s; + return s; + } + + +/* return pointer to copy of filename in the command buffer */ +static const char *get_filename( void ) + { + static char *buf = 0; + static int bufsz = 0; + int size, n; + + ibufp = skip_blanks( ibufp ); + if( *ibufp != '\n' ) + { + ibufp = get_extended_line( ibufp, &size, 1 ); + if( !ibufp ) return 0; + if( *ibufp == '!' ) + { + ++ibufp; + n = get_shell_command(); + if( n < 0 ) return 0; + if( n ) printf( "%s\n", shcmd + 1 ); + return shcmd; + } + else if( size > path_max( 0 ) ) + { set_error_msg( "Filename too long" ); return 0; } + } + else if( !traditional() && !def_filename[0] ) + { set_error_msg( "No current filename" ); return 0; } + if( !resize_buffer( &buf, &bufsz, path_max( 0 ) + 1 ) ) return 0; + for( n = 0; *ibufp != '\n'; ) buf[n++] = *ibufp++; + buf[n] = 0; + return ( may_access_filename( buf ) ? buf : 0 ); + } + + +static void invalid_address( void ) { set_error_msg( "Invalid address" ); } + + +/* return the next line address in the command buffer */ +static int next_addr( int *addr_cnt ) + { + const char *hd = ibufp = skip_blanks( ibufp ); + int addr = current_addr(); + int first = 1; + + while( 1 ) + { + int n; + const unsigned char ch = *ibufp; + if( isdigit( ch ) ) + { + if( !first ) { invalid_address(); return -2; }; + if( !parse_int( &addr, ibufp, &ibufp ) ) return -2; + } + else switch( ch ) + { + case '+': + case '\t': + case ' ': + case '-': ibufp = skip_blanks( ++ibufp ); + if( isdigit( (unsigned char)*ibufp ) ) + { + if( !parse_int( &n, ibufp, &ibufp ) ) return -2; + addr += ( ( ch == '-' ) ? -n : n ); + } + else if( ch == '+' ) ++addr; + else if( ch == '-' ) --addr; + break; + case '.': + case '$': if( !first ) { invalid_address(); return -2; }; + ++ibufp; addr = ( ( ch == '.' ) ? current_addr() : last_addr() ); + break; + case '/': + case '?': if( !first ) { invalid_address(); return -2; }; + addr = get_matching_node_addr( &ibufp, ch == '/' ); + if( addr < 0 ) return -2; + if( ch == *ibufp ) ++ibufp; + break; + case '\'':if( !first ) { invalid_address(); return -2; }; + ++ibufp; addr = get_marked_node_addr( *ibufp++ ); + if( addr < 0 ) return -2; + break; + case '%': + case ',': + case ';': if( first ) + { + ++ibufp; ++*addr_cnt; + second_addr = ( ( ch == ';' ) ? current_addr() : 1 ); + addr = last_addr(); + break; + } /* FALL THROUGH */ + default: if( ibufp == hd ) return -1; /* EOF */ + if( addr < 0 || addr > last_addr() ) + { invalid_address(); return -2; } + ++*addr_cnt; return addr; + } + first = 0; + } + } + + +/* get line addresses from the command buffer until an invalid address + is seen. Return number of addresses read */ +static int extract_addr_range( void ) + { + int addr; + int addr_cnt = 0; + + first_addr = second_addr = current_addr(); + while( ( addr = next_addr( &addr_cnt ) ) >= 0 ) + { + first_addr = second_addr; second_addr = addr; + if( *ibufp != ',' && *ibufp != ';' ) break; + if( *ibufp++ == ';' ) set_current_addr( addr ); + } + if( addr_cnt == 1 || second_addr != addr ) first_addr = second_addr; + return ( ( addr != -2 ) ? addr_cnt : -1 ); + } + + +/* get a valid address from the command buffer */ +static char get_third_addr( int *addr ) + { + int ol1 = first_addr; + int ol2 = second_addr; + + int addr_cnt = extract_addr_range(); if( addr_cnt < 0 ) return 0; + if( traditional() && addr_cnt == 0 ) + { set_error_msg( "Destination expected" ); return 0; } + if( second_addr < 0 || second_addr > last_addr() ) + { invalid_address(); return 0; } + *addr = second_addr; + first_addr = ol1; second_addr = ol2; + return 1; + } + + +/* return true if address range is valid */ +static char check_addr_range( const int n, const int m, const int addr_cnt ) + { + if( addr_cnt == 0 ) + { + first_addr = ( ( n >= 0 ) ? n : current_addr() ); + second_addr = ( ( m >= 0 ) ? m : current_addr() ); + } + if( first_addr < 1 || first_addr > second_addr || second_addr > last_addr() ) + { invalid_address(); return 0; } + return 1; + } + + +/* verify the command suffix in the command buffer */ +static char get_command_suffix( int *gflagsp ) + { + while( 1 ) + { + const char ch = *ibufp; + if( ch == 'l' ) *gflagsp |= GLS; + else if( ch == 'n' ) *gflagsp |= GNP; + else if( ch == 'p' ) *gflagsp |= GPR; + else break; + ++ibufp; + } + if( *ibufp++ != '\n' ) + { set_error_msg( "Invalid command suffix" ); return 0; } + return 1; + } + + +static char unexpected_address( const int addr_cnt ) + { + if( addr_cnt > 0 ) { set_error_msg( "Unexpected address" ); return 1; } + return 0; + } + +static char unexpected_command_suffix( const unsigned char ch ) + { + if( !isspace( ch ) ) + { set_error_msg( "Unexpected command suffix" ); return 1; } + return 0; + } + + +static char command_s( int *gflagsp, const int addr_cnt, const char isglobal ) + { + static int gflags = 0; + static int snum = 0; + enum Sflags { + SGG = 0x01, /* complement previous global substitute suffix */ + SGP = 0x02, /* complement previous print suffix */ + SGR = 0x04, /* use last regex instead of last pat */ + SGF = 0x08 /* repeat last substitution */ + } sflags = 0; + + do { + if( isdigit( (unsigned char)*ibufp ) ) + { + if( !parse_int( &snum, ibufp, &ibufp ) ) return 0; + sflags |= SGF; gflags &= ~GSG; /* override GSG */ + } + else switch( *ibufp ) + { + case '\n':sflags |= SGF; break; + case 'g': sflags |= SGG; ++ibufp; break; + case 'p': sflags |= SGP; ++ibufp; break; + case 'r': sflags |= SGR; ++ibufp; break; + default: if( sflags ) + { set_error_msg( "Invalid command suffix" ); return 0; } + } + } + while( sflags && *ibufp != '\n' ); + if( sflags && !prev_pattern() ) + { set_error_msg( "No previous substitution" ); return 0; } + if( sflags & SGG ) snum = 0; /* override numeric arg */ + if( *ibufp != '\n' && ibufp[1] == '\n' ) + { set_error_msg( "Invalid pattern delimiter" ); return 0; } + if( ( !sflags || ( sflags & SGR ) ) && !new_compiled_pattern( &ibufp ) ) + return 0; + if( !sflags && !extract_subst_tail( &ibufp, &gflags, &snum, isglobal ) ) + return 0; + if( isglobal ) gflags |= GLB; + else gflags &= ~GLB; + if( sflags & SGG ) gflags ^= GSG; + if( sflags & SGP ) { gflags ^= GPR; gflags &= ~( GLS | GNP ); } + switch( *ibufp ) + { + case 'l': gflags |= GLS; ++ibufp; break; + case 'n': gflags |= GNP; ++ibufp; break; + case 'p': gflags |= GPR; ++ibufp; break; + } + if( !check_addr_range( -1, -1, addr_cnt ) ) return 0; + if( !get_command_suffix( gflagsp ) ) return 0; + if( !isglobal ) clear_undo_stack(); + if( !search_and_replace( first_addr, second_addr, gflags, snum, isglobal ) ) + return 0; + if( ( gflags & ( GPR | GLS | GNP ) ) && + !display_lines( current_addr(), current_addr(), gflags ) ) + return 0; + return 1; + } + + +static char exec_global( const char *ibufp2, int gflags, const char interact ); +/* execute the next command in command buffer; return error status */ +static int exec_command( const char isglobal ) + { + const char *fnp; + int gflags = 0; + int addr, c, n; + + const int addr_cnt = extract_addr_range(); if( addr_cnt < 0 ) return ERR; + ibufp = skip_blanks( ibufp ); + c = *ibufp++; + switch( c ) + { + case 'a': if( !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !append_lines( ibufp, second_addr, isglobal ) ) return ERR; + ibufp = ""; + break; + case 'c': if( first_addr == 0 ) first_addr = 1; + if( second_addr == 0 ) second_addr = 1; + if( !check_addr_range( -1, -1, addr_cnt ) || + !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !delete_lines( first_addr, second_addr, isglobal ) || + !append_lines( ibufp, current_addr(), isglobal ) ) return ERR; + ibufp = ""; + break; + case 'd': if( !check_addr_range( -1, -1, addr_cnt ) || + !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !delete_lines( first_addr, second_addr, isglobal ) ) return ERR; + inc_current_addr(); + break; + case 'e': if( modified() && !scripted() ) return EMOD; /* fall through */ + case 'E': if( unexpected_address( addr_cnt ) || + unexpected_command_suffix( *ibufp ) ) return ERR; + fnp = get_filename(); + if( !fnp || !get_command_suffix( &gflags ) || + !delete_lines( 1, last_addr(), isglobal ) ) return ERR; + if( !close_sbuf() ) return ERR; + if( !open_sbuf() ) return FATAL; + if( fnp[0] && fnp[0] != '!' ) set_def_filename( fnp ); + if( traditional() && !fnp[0] && !def_filename[0] ) + { set_error_msg( "No current filename" ); return ERR; } + if( read_file( fnp[0] ? fnp : def_filename, 0 ) < 0 ) + return ERR; + reset_undo_state(); set_modified( 0 ); + break; + case 'f': if( unexpected_address( addr_cnt ) || + unexpected_command_suffix( *ibufp ) ) return ERR; + fnp = get_filename(); + if( !fnp ) return ERR; + if( fnp[0] == '!' ) + { set_error_msg( "Invalid redirection" ); return ERR; } + if( !get_command_suffix( &gflags ) ) return ERR; + if( fnp[0] ) set_def_filename( fnp ); + printf( "%s\n", strip_escapes( def_filename ) ); + break; + case 'g': + case 'v': + case 'G': + case 'V': if( isglobal ) + { set_error_msg( "Cannot nest global commands" ); return ERR; } + n = ( c == 'g' || c == 'G' ); /* mark matching lines */ + if( !check_addr_range( 1, last_addr(), addr_cnt ) || + !build_active_list( &ibufp, first_addr, second_addr, n ) ) + return ERR; + n = ( c == 'G' || c == 'V' ); /* interact */ + if( ( n && !get_command_suffix( &gflags ) ) || + !exec_global( ibufp, gflags, n ) ) + return ERR; + break; + case 'h': + case 'H': if( unexpected_address( addr_cnt ) || + !get_command_suffix( &gflags ) ) return ERR; + if( c == 'H' ) verbose = !verbose; + if( ( c == 'h' || verbose ) && errmsg[0] ) + fprintf( stderr, "%s\n", errmsg ); + break; + case 'i': if( second_addr == 0 ) second_addr = 1; + if( !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !append_lines( ibufp, second_addr - 1, isglobal ) ) return ERR; + ibufp = ""; + break; + case 'j': if( !check_addr_range( -1, current_addr() + 1, addr_cnt ) || + !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( first_addr != second_addr && + !join_lines( first_addr, second_addr, isglobal ) ) return ERR; + break; + case 'k': n = *ibufp++; + if( second_addr == 0 ) { invalid_address(); return ERR; } + if( !get_command_suffix( &gflags ) || + !mark_line_node( search_line_node( second_addr ), n ) ) + return ERR; + break; + case 'l': + case 'n': + case 'p': if( c == 'l' ) n = GLS; else if( c == 'n' ) n = GNP; else n = GPR; + if( !check_addr_range( -1, -1, addr_cnt ) || + !get_command_suffix( &gflags ) || + !display_lines( first_addr, second_addr, gflags | n ) ) + return ERR; + gflags = 0; + break; + case 'm': if( !check_addr_range( -1, -1, addr_cnt ) || + !get_third_addr( &addr ) ) return ERR; + if( addr >= first_addr && addr < second_addr ) + { set_error_msg( "Invalid destination" ); return ERR; } + if( !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !move_lines( first_addr, second_addr, addr, isglobal ) ) + return ERR; + break; + case 'P': + case 'q': + case 'Q': if( unexpected_address( addr_cnt ) || + !get_command_suffix( &gflags ) ) return ERR; + if( c == 'P' ) prompt_on = !prompt_on; + else return ( ( modified() && !scripted() && c == 'q' ) ? EMOD : -1 ); + break; + case 'r': if( unexpected_command_suffix( *ibufp ) ) return ERR; + if( addr_cnt == 0 ) second_addr = last_addr(); + fnp = get_filename(); + if( !fnp || !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !def_filename[0] && fnp[0] != '!' ) set_def_filename( fnp ); + if( traditional() && !fnp[0] && !def_filename[0] ) + { set_error_msg( "No current filename" ); return ERR; } + addr = read_file( fnp[0] ? fnp : def_filename, second_addr ); + if( addr < 0 ) return ERR; + if( addr && addr != last_addr() ) set_modified( 1 ); + break; + case 's': if( !command_s( &gflags, addr_cnt, isglobal ) ) return ERR; + break; + case 't': if( !check_addr_range( -1, -1, addr_cnt ) || + !get_third_addr( &addr ) || + !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !copy_lines( first_addr, second_addr, addr ) ) return ERR; + break; + case 'u': if( unexpected_address( addr_cnt ) || + !get_command_suffix( &gflags ) || + !undo( isglobal ) ) return ERR; + break; + case 'w': + case 'W': n = *ibufp; + if( n == 'q' || n == 'Q' ) ++ibufp; + if( unexpected_command_suffix( *ibufp ) ) return ERR; + fnp = get_filename(); + if( !fnp ) return ERR; + if( addr_cnt == 0 && !last_addr() ) first_addr = second_addr = 0; + else if( !check_addr_range( 1, last_addr(), addr_cnt ) ) return ERR; + if( !get_command_suffix( &gflags ) ) return ERR; + if( !def_filename[0] && fnp[0] != '!' ) set_def_filename( fnp ); + if( traditional() && !fnp[0] && !def_filename[0] ) + { set_error_msg( "No current filename" ); return ERR; } + addr = write_file( fnp[0] ? fnp : def_filename, + ( c == 'W' ) ? "a" : "w", first_addr, second_addr ); + if( addr < 0 ) return ERR; + if( addr == last_addr() ) set_modified( 0 ); + else if( modified() && !scripted() && n == 'q' ) return EMOD; + if( n == 'q' || n == 'Q' ) return -1; + break; + case 'x': if( second_addr < 0 || last_addr() < second_addr ) + { invalid_address(); return ERR; } + if( !get_command_suffix( &gflags ) ) return ERR; + if( !isglobal ) clear_undo_stack(); + if( !put_lines( second_addr ) ) return ERR; + break; + case 'y': if( !check_addr_range( -1, -1, addr_cnt ) || + !get_command_suffix( &gflags ) || + !yank_lines( first_addr, second_addr ) ) return ERR; + break; + case 'z': first_addr = 1; + if( !check_addr_range( first_addr, current_addr() + + ( traditional() || !isglobal ), addr_cnt ) ) + return ERR; + if( *ibufp > '0' && *ibufp <= '9' ) + { if( parse_int( &n, ibufp, &ibufp ) ) set_window_lines( n ); + else return ERR; } + if( !get_command_suffix( &gflags ) || + !display_lines( second_addr, min( last_addr(), second_addr + window_lines() ), + gflags ) ) + return ERR; + gflags = 0; + break; + case '=': if( !get_command_suffix( &gflags ) ) return ERR; + printf( "%d\n", addr_cnt ? second_addr : last_addr() ); + break; + case '!': if( unexpected_address( addr_cnt ) ) return ERR; + n = get_shell_command(); + if( n < 0 || !get_command_suffix( &gflags ) ) return ERR; + if( n ) printf( "%s\n", shcmd + 1 ); + system( shcmd + 1 ); + if( !scripted() ) printf( "!\n" ); + break; + case '\n': first_addr = 1; + if( !check_addr_range( first_addr, current_addr() + + ( traditional() || !isglobal ), addr_cnt ) || + !display_lines( second_addr, second_addr, 0 ) ) + return ERR; + break; + case '#': while( *ibufp++ != '\n' ) ; + break; + default: set_error_msg( "Unknown command" ); return ERR; + } + if( gflags && !display_lines( current_addr(), current_addr(), gflags ) ) + return ERR; + return 0; + } + + +/* apply command list in the command buffer to the active lines in a + range; return false if error */ +static char exec_global( const char *ibufp2, int gflags, const char interact ) + { + static char *buf = 0; + static int bufsz = 0; + const line_t *lp = 0; + const char *cmd = 0; + + if( !interact ) + { + if( traditional() && !strcmp( ibufp2, "\n" ) ) + cmd = "p\n"; /* null cmd-list == `p' */ + else if( !( cmd = get_extended_line( ibufp2, 0, 0 ) ) ) + return 0; + } + clear_undo_stack(); + while( ( lp = next_active_node() ) ) + { + set_current_addr( get_line_node_addr( lp ) ); + if( current_addr() < 0 ) return 0; + if( interact ) + { + /* print current_addr; get a command in global syntax */ + int len; + if( !display_lines( current_addr(), current_addr(), gflags ) ) + return 0; + do { ibufp2 = get_tty_line( &len ); } + while( ibufp2 && len > 0 && ibufp2[len-1] != '\n' ); + if( !ibufp2 ) return 0; + if( len == 0 ) { set_error_msg( "Unexpected end-of-file" ); return 0; } + if( len == 1 && !strcmp( ibufp2, "\n" ) ) continue; + if( len == 2 && !strcmp( ibufp2, "&\n" ) ) + { if( !cmd ) { set_error_msg( "No previous command" ); return 0; } } + else if( !( cmd = get_extended_line( ibufp2, &len, 0 ) ) ) return 0; + else + { + if( !resize_buffer( &buf, &bufsz, len + 1 ) ) return 0; + memcpy( buf, cmd, len + 1 ); + cmd = buf; + } + } + ibufp = cmd; + while( *ibufp ) if( exec_command( 1 ) < 0 ) return 0; + } + return 1; + } + + +int main_loop( const char loose ) + { + extern jmp_buf jmp_state; + volatile int err_status = 0; /* program exit status */ + volatile int linenum = 0; /* script line number */ + int len, status, old_status; + + disable_interrupts(); + set_signals(); + status = setjmp( jmp_state ); + if( !status ) enable_interrupts(); + else { status = -1; fputs( "\n?\n", stderr ); set_error_msg( "Interrupt" ); } + + while( 1 ) + { + if( status < 0 && verbose ) fprintf( stderr, "%s\n", errmsg ); + if( prompt_on ) { printf( "%s", prompt_str ); fflush( stdout ); } + ibufp = get_tty_line( &len ); + if( !ibufp ) return err_status; + if( !len ) + { + if( !modified() || scripted() ) return err_status; + fputs( "?\n", stderr ); set_error_msg( "Warning: file modified" ); + if( is_regular_file( 0 ) ) + { + if( verbose ) fprintf( stderr, "script, line %d: %s\n", linenum, errmsg ); + return 2; + } + set_modified( 0 ); status = EMOD; continue; + } + else if( ibufp[len-1] != '\n' ) /* discard line */ + { set_error_msg( "Unexpected end-of-file" ); status = ERR; continue; } + else ++linenum; + old_status = status; + status = exec_command( 0 ); + if( status == 0 ) continue; + if( status == -1 ) return err_status; + if( status == EMOD ) + { + if( old_status == EMOD ) return err_status; + fputs( "?\n", stderr ); /* give warning */ + set_error_msg( "Warning: file modified" ); + if( is_regular_file( 0 ) ) + { + if( verbose ) fprintf( stderr, "script, line %d: %s\n", linenum, errmsg ); + return 1; + } + } + else if( status == FATAL ) + { + if( verbose ) + { + if( is_regular_file( 0 ) ) + fprintf( stderr, "script, line %d: %s\n", linenum, errmsg ); + else fprintf( stderr, "%s\n", errmsg ); + } + return 1; + } + else + { + fputs( "?\n", stderr ); /* give warning */ + if( is_regular_file( 0 ) ) + { + if( verbose ) fprintf( stderr, "script, line %d: %s\n", linenum, errmsg ); + return 1; + } + } + if( !loose ) err_status = 1; + } + } + + +void set_error_msg( const char *msg ) + { + if( !msg ) msg = ""; + strncpy( errmsg, msg, sizeof( errmsg ) ); + errmsg[sizeof(errmsg)-1] = 0; + } diff --git a/packaging/ed.changes b/packaging/ed.changes new file mode 100644 index 0000000..4c67bd7 --- /dev/null +++ b/packaging/ed.changes @@ -0,0 +1,165 @@ +* Mon Feb 01 2010 Yi Yang - 1.4 +- Update to 1.4 + +* Fri Feb 13 2009 Anas Nashif 1.2 +- Update to 1.2 + +* Thur Jan 22 2009 Passion Zhao 1.1-1 +- update to 1.1, fixes CVE-2008-3916 + +* Fri Sep 12 2008 vivian zhang 0.8 +- add check for the info file before installing it in post/preun +- add %doc to man/info in spec file + +* Tue Feb 19 2008 Fedora Release Engineering - 0.8-2 +- Autorebuild for GCC 4.3 + +* Wed Aug 22 2007 Karsten Hopp 0.8-1 +- update to 0.8 + +* Wed Aug 22 2007 Karsten Hopp 0.7-2 +- update license tags + +* Mon Jul 23 2007 Karsten Hopp 0.7-1 +- update to 0.7 to fix an endless loop (#234689) +- add disttag + +* Mon Jul 02 2007 Karsten Hopp 0.6-1 +- update to 0.6 + +* Wed Mar 14 2007 Karsten Hopp 0.5-1 +- version 0.5, fixes #228329 + +* Mon Feb 05 2007 Karsten Hopp 0.4-3 +- clean up spec file for merge review (#225717) + +* Wed Jan 31 2007 Karsten Hopp 0.4-2 +- use RPM_OPT_FLAGS, this fixes debuginfo + +* Tue Jan 23 2007 Karsten Hopp 0.4-1 +- new upstream version + +* Thu Jan 18 2007 Karsten Hopp 0.3-3 +- don't abort (un)install scriptlets when _excludedocs is set (Ville Skyttä) + +* Thu Jan 18 2007 Karsten Hopp 0.3-2 +- fix man page permissions (#222581) + +* Mon Nov 13 2006 Karsten Hopp 0.3-1 +- update to ed-0.3 + +* Wed Jul 12 2006 Jesse Keating - 0.2-38.2.2 +- rebuild + +* Fri Feb 10 2006 Jesse Keating - 0.2-38.2.1 +- bump again for double-long bug on ppc(64) + +* Tue Feb 07 2006 Jesse Keating - 0.2-38.2 +- rebuilt for new gcc4.1 snapshot and glibc changes + +* Fri Dec 09 2005 Jesse Keating +- rebuilt + +* Wed Mar 02 2005 Karsten Hopp 0.2-38 +- build with gcc-4 + +* Mon Jan 03 2005 Karsten Hopp 0.2-37 +- spec file fix from Marcin Garski (#143723) + +* Tue Jun 15 2004 Elliot Lee +- rebuilt + +* Fri Feb 13 2004 Elliot Lee +- rebuilt + +* Tue Jun 17 2003 Karsten Hopp 0.2-34 +- rebuild + +* Tue Jun 17 2003 Karsten Hopp 0.2-33 +- rebuild to fix crt*.o problems + +* Wed Jun 04 2003 Elliot Lee +- rebuilt + +* Wed Jan 22 2003 Tim Powers +- rebuilt + +* Tue Dec 17 2002 Karsten Hopp č +- remove regex, use glibc's regex (#79132) + +* Thu Dec 12 2002 Tim Powers 0.2-29 +- rebuild on all arches + +* Fri Jun 21 2002 Tim Powers +- automated rebuild + +* Thu May 23 2002 Tim Powers +- automated rebuild + +* Mon May 6 2002 Bernhard Rosenkraenzer 0.2-26 +- Fix build with current toolchain + +* Wed Apr 03 2002 Karsten Hopp +- don't use gcc -s + +* Fri Feb 22 2002 Karsten Hopp +- bump version + +* Wed Jan 09 2002 Tim Powers +- automated rebuild + +* Mon Oct 15 2001 Karsten Hopp +- add home page (#54602) + +* Sat Jul 07 2001 Karsten Hopp +- Copyright -> License +- fix URL + +* Sun Jun 24 2001 Elliot Lee +- Bump release + rebuild. + +* Mon Dec 04 2000 Karsten Hopp +- back out fixes for compiler warnings + +* Wed Nov 29 2000 Karsten Hopp +- Security bugfix (mkstemp instead of mktemp) Bugzilla #21470 + +* Wed Jul 12 2000 Prospector +- automatic rebuild + +* Sun Jun 18 2000 Than Ngo +- fix typo + +* Sat Jun 17 2000 Than Ngo +- add %%defattr +- clean up specfile + +* Sat May 20 2000 Ngo Than +- rebuild for 7.0 +- put man pages and infos in right place + +* Thu Feb 03 2000 Preston Brown +- rebuild to gzip man pages. + +* Tue Mar 23 1999 Jeff Johnson +- fix %%post syntax error (#1689). + +* Sun Mar 21 1999 Cristian Gafton +- auto rebuild in the new build environment (release 11) + +* Wed Feb 24 1999 Preston Brown +- Injected new description and group. + +* Fri Dec 18 1998 Preston Brown +- bumped spec number for initial rh 6.0 build + +* Mon Apr 27 1998 Prospector System +- translations modified for de, fr, tr + +* Fri Oct 17 1997 Donnie Barnes +- added install-info support +- added BuildRoot +- correct URL in Source line + +* Mon Jun 02 1997 Erik Troan +- built against glibc diff --git a/packaging/ed.spec b/packaging/ed.spec new file mode 100644 index 0000000..5094ecf --- /dev/null +++ b/packaging/ed.spec @@ -0,0 +1,59 @@ +#specfile originally created for Fedora, modified for Moblin Linux +Summary: The GNU line editor +Name: ed +Version: 1.4 +Release: 1 +License: GPLv3+ +Group: Applications/Text +Source: ftp://ftp.gnu.org/gnu/ed/%{name}-%{version}.tar.gz +URL: http://www.gnu.org/software/ed/ +Requires(post): /sbin/install-info +Requires(preun): /sbin/install-info +Buildroot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) + +%description +Ed is a line-oriented text editor, used to create, display, and modify +text files (both interactively and via shell scripts). For most +purposes, ed has been replaced in normal usage by full-screen editors +(emacs and vi, for example). + +Ed was the original UNIX editor, and may be used by some programs. In +general, however, you probably don't need to install it and you probably +won't use it. + +%prep +%setup -q +rm -f stamp-h.in + +%build +%configure --exec-prefix=/ +make %{?_smp_mflags} CFLAGS="$RPM_OPT_FLAGS" + +%install +rm -rf $RPM_BUILD_ROOT +mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1 +make install DESTDIR=$RPM_BUILD_ROOT \ + bindir=/bin mandir=%{_mandir}/man1 + +rm -f $RPM_BUILD_ROOT%{_infodir}/dir* +gzip -9qnf $RPM_BUILD_ROOT%{_infodir}/* +install -p -m0644 doc/ed.1 $RPM_BUILD_ROOT%{_mandir}/man1 + +%post +[ -e %{_infodir}/ed.info.gz ] && /sbin/install-info %{_infodir}/ed.info.gz %{_infodir}/dir --entry="* ed: (ed). The GNU Line Editor." || : + +%preun +if [ $1 = 0 ] ; then + [ -e %{_infodir}/ed.info.gz ] && /sbin/install-info --delete %{_infodir}/ed.info.gz %{_infodir}/dir --entry="* ed: (ed). The GNU Line Editor." || : +fi + +%clean +rm -rf $RPM_BUILD_ROOT + +%files +%defattr(-,root,root) +%doc ChangeLog NEWS README TODO AUTHORS COPYING +/bin/* +%doc %{_infodir}/ed.info.gz +%doc %{_mandir}/*/* + diff --git a/regex.c b/regex.c new file mode 100644 index 0000000..7d6f272 --- /dev/null +++ b/regex.c @@ -0,0 +1,392 @@ +/* regex.c: regular expression interface routines for the ed line editor. */ +/* GNU ed - The GNU line editor. + Copyright (C) 1993, 1994 Andrew Moore, Talke Studio + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "ed.h" + + +static regex_t *global_pat = 0; +static char patlock = 0; /* if set, pattern not freed by get_compiled_pattern */ + +static char *stbuf = 0; /* substitution template buffer */ +static int stbufsz = 0; /* substitution template buffer size */ +static int stlen = 0; /* substitution template length */ + +static char *rbuf = 0; /* replace_matching_text buffer */ +static int rbufsz = 0; /* replace_matching_text buffer size */ + + +char prev_pattern( void ) { return global_pat != 0; } + + +/* translate characters in a string */ +static void translit_text( char *s, int len, char from, char to ) + { + char *p = s; + + while( --len > 0 ) + { + if( *p == from ) *p = to; + ++p; + } + } + + +/* overwrite newlines with ASCII NULs */ +static void newline_to_nul( char *s, int len ) + { translit_text( s, len, '\n', '\0' ); } + +/* overwrite ASCII NULs with newlines */ +static void nul_to_newline( char *s, int len ) + { translit_text( s, len, '\0', '\n' ); } + + +/* expand a POSIX character class */ +static const char *parse_char_class( const char *s ) + { + char c, d; + + if( *s == '^' ) ++s; + if( *s == ']' ) ++s; + for( ; *s != ']' && *s != '\n'; ++s ) + if( *s == '[' && ( ( d = s[1] ) == '.' || d == ':' || d == '=' ) ) + for( ++s, c = *++s; *s != ']' || c != d; ++s ) + if( ( c = *s ) == '\n' ) + return 0; + return ( ( *s == ']' ) ? s : 0 ); + } + + +/* copy a pattern string from the command buffer; return pointer to the copy */ +static char *extract_pattern( const char **ibufpp, const int delimiter ) + { + static char *buf = 0; + static int bufsz = 0; + const char *nd = *ibufpp; + int len; + + while( *nd != delimiter && *nd != '\n' ) + { + if( *nd == '[' ) + { + nd = parse_char_class( ++nd ); + if( !nd ) { set_error_msg( "Unbalanced brackets ([])" ); return 0; } + } + else if( *nd == '\\' && *++nd == '\n' ) + { set_error_msg( "Trailing backslash (\\)" ); return 0; } + ++nd; + } + len = nd - *ibufpp; + if( !resize_buffer( &buf, &bufsz, len + 1 ) ) return 0; + memcpy( buf, *ibufpp, len ); + buf[len] = 0; + *ibufpp = nd; + if( isbinary() ) nul_to_newline( buf, len ); + return buf; + } + + +/* return pointer to compiled pattern from command buffer */ +static regex_t *get_compiled_pattern( const char **ibufpp ) + { + static regex_t *exp = 0; + char *exps; + const char delimiter = **ibufpp; + int n; + + if( delimiter == ' ' ) + { set_error_msg( "Invalid pattern delimiter" ); return 0; } + if( delimiter == '\n' || *++(*ibufpp) == '\n' || **ibufpp == delimiter ) + { + if( !exp ) set_error_msg( "No previous pattern" ); + return exp; + } + if( !( exps = extract_pattern( ibufpp, delimiter ) ) ) return 0; + /* buffer alloc'd && not reserved */ + if( exp && !patlock ) regfree( exp ); + else if( !( exp = ( regex_t *) malloc( sizeof( regex_t ) ) ) ) + { + show_strerror( 0, errno ); + set_error_msg( "Memory exhausted" ); + return 0; + } + patlock = 0; + n = regcomp( exp, exps, 0 ); + if( n ) + { + char buf[80]; + regerror( n, exp, buf, sizeof( buf ) ); + set_error_msg( buf ); + free( exp ); + exp = 0; + } + return exp; + } + + +/* add line matching a pattern to the global-active list */ +char build_active_list( const char **ibufpp, const int first_addr, + const int second_addr, const char match ) + { + regex_t *pat; + line_t *lp; + int addr; + const char delimiter = **ibufpp; + + if( delimiter == ' ' || delimiter == '\n' ) + { set_error_msg( "Invalid pattern delimiter" ); return 0; } + if( !( pat = get_compiled_pattern( ibufpp ) ) ) return 0; + if( **ibufpp == delimiter ) ++(*ibufpp); + clear_active_list(); + lp = search_line_node( first_addr ); + for( addr = first_addr; addr <= second_addr; ++addr, lp = lp->q_forw ) + { + char *s = get_sbuf_line( lp ); + if( !s ) return 0; + if( isbinary() ) nul_to_newline( s, lp->len ); + if( !regexec( pat, s, 0, 0, 0 ) == match && !set_active_node( lp ) ) + return 0; + } + return 1; + } + + +/* return pointer to copy of substitution template in the command buffer */ +static char *extract_subst_template( const char **ibufpp, const char isglobal ) + { + int i = 0, n = 0; + char c; + const char delimiter = **ibufpp; + + ++(*ibufpp); + if( **ibufpp == '%' && (*ibufpp)[1] == delimiter ) + { + ++(*ibufpp); + if( !stbuf ) set_error_msg( "No previous substitution" ); + return stbuf; + } + while( **ibufpp != delimiter ) + { + if( !resize_buffer( &stbuf, &stbufsz, i + 2 ) ) return 0; + c = stbuf[i++] = *(*ibufpp)++; + if( c == '\n' && **ibufpp == 0 ) { --i, --(*ibufpp); break; } + if( c == '\\' && ( stbuf[i++] = *(*ibufpp)++ ) == '\n' && !isglobal ) + { + while( ( *ibufpp = get_tty_line( &n ) ) && + ( n == 0 || ( n > 0 && (*ibufpp)[n-1] != '\n' ) ) ) + clearerr( stdin ); + if( !(*ibufpp) ) return 0; + } + } + if( !resize_buffer( &stbuf, &stbufsz, i + 1 ) ) return 0; + stbuf[stlen = i] = 0; + return stbuf; + } + + +/* extract substitution tail from the command buffer */ +char extract_subst_tail( const char **ibufpp, int *gflagsp, int *snump, + const char isglobal ) + { + const char delimiter = **ibufpp; + + *gflagsp = *snump = 0; + if( delimiter == '\n' ) { stlen = 0; *gflagsp = GPR; return 1; } + if( !extract_subst_template( ibufpp, isglobal ) ) return 0; + if( **ibufpp == '\n' ) { *gflagsp = GPR; return 1; } + if( **ibufpp == delimiter ) ++(*ibufpp); + if( **ibufpp >= '1' && **ibufpp <= '9' ) return parse_int( snump, *ibufpp, ibufpp ); + if( **ibufpp == 'g' ) { ++(*ibufpp); *gflagsp = GSG; return 1; } + return 1; + } + + +/* return the address of the next line matching a pattern in a given + direction. wrap around begin/end of editor buffer if necessary */ +int get_matching_node_addr( const char **ibufpp, const char forward ) + { + regex_t *pat = get_compiled_pattern( ibufpp ); + int addr = current_addr(); + + if( !pat ) return -1; + do { + addr = ( forward ? inc_addr( addr ) : dec_addr( addr ) ); + if( addr ) + { + line_t *lp = search_line_node( addr ); + char *s = get_sbuf_line( lp ); + if( !s ) return -1; + if( isbinary() ) nul_to_newline( s, lp->len ); + if( !regexec( pat, s, 0, 0, 0 ) ) return addr; + } + } + while( addr != current_addr() ); + set_error_msg( "No match" ); + return -1; + } + + +char new_compiled_pattern( const char **ibufpp ) + { + regex_t *tpat = global_pat; + + disable_interrupts(); + tpat = get_compiled_pattern( ibufpp ); + if( !tpat ) { enable_interrupts(); return 0; } + if( tpat != global_pat ) + { + if( global_pat ) { regfree( global_pat ); free( global_pat ); } + global_pat = tpat; + patlock = 1; /* reserve pattern */ + } + enable_interrupts(); + return 1; + } + + +/* modify text according to a substitution template; return offset to + end of modified text */ +static int apply_subst_template( const char *boln, const regmatch_t *rm, int off, + const int re_nsub ) + { + const char *sub = stbuf; + + for( ; sub - stbuf < stlen; ++sub ) + { + int n; + if( *sub == '&' ) + { + int j = rm[0].rm_so; int k = rm[0].rm_eo; + if( !resize_buffer( &rbuf, &rbufsz, off + k - j ) ) return -1; + while( j < k ) rbuf[off++] = boln[j++]; + } + else if( *sub == '\\' && *++sub >= '1' && *sub <= '9' && + ( n = *sub - '0' ) <= re_nsub ) + { + int j = rm[n].rm_so; int k = rm[n].rm_eo; + if( !resize_buffer( &rbuf, &rbufsz, off + k - j ) ) return -1; + while( j < k ) rbuf[off++] = boln[j++]; + } + else + { + if( !resize_buffer( &rbuf, &rbufsz, off + 1 ) ) return -1; + rbuf[off++] = *sub; + } + } + if( !resize_buffer( &rbuf, &rbufsz, off + 1 ) ) return -1; + rbuf[off] = 0; + return off; + } + + +/* replace text matched by a pattern according to a substitution + template; return pointer to the modified text */ +static int replace_matching_text( const line_t *lp, const int gflags, + const int snum ) + { + const int se_max = 30; /* max subexpressions in a regular expression */ + regmatch_t rm[se_max]; + char *txt = get_sbuf_line( lp ); + char *eot; + int i = 0, off = 0; + char changed = 0; + + if( !txt ) return -1; + if( isbinary() ) nul_to_newline( txt, lp->len ); + eot = txt + lp->len; + if( !regexec( global_pat, txt, se_max, rm, 0 ) ) + { + int matchno = 0; + do { + if( !snum || snum == ++matchno ) + { + changed = 1; i = rm[0].rm_so; + if( !resize_buffer( &rbuf, &rbufsz, off + i ) ) return -1; + if( isbinary() ) newline_to_nul( txt, rm[0].rm_eo ); + memcpy( rbuf + off, txt, i ); off += i; + off = apply_subst_template( txt, rm, off, global_pat->re_nsub ); + if( off < 0 ) return -1; + } + else + { + i = rm[0].rm_eo; + if( !resize_buffer( &rbuf, &rbufsz, off + i ) ) return -1; + if( isbinary() ) newline_to_nul( txt, i ); + memcpy( rbuf + off, txt, i ); off += i; + } + txt += rm[0].rm_eo; + } + while( *txt && ( !changed || ( ( gflags & GSG ) && rm[0].rm_eo ) ) && + !regexec( global_pat, txt, se_max, rm, REG_NOTBOL ) ); + i = eot - txt; + if( !resize_buffer( &rbuf, &rbufsz, off + i + 2 ) ) return -1; + if( i > 0 && !rm[0].rm_eo && ( gflags & GSG ) ) + { set_error_msg( "Infinite substitution loop" ); return -1; } + if( isbinary() ) newline_to_nul( txt, i ); + memcpy( rbuf + off, txt, i ); + memcpy( rbuf + off + i, "\n", 2 ); + } + return ( changed ? off + i + 1 : 0 ); + } + + +/* for each line in a range, change text matching a pattern according to + a substitution template; return false if error */ +char search_and_replace( const int first_addr, const int second_addr, + const int gflags, const int snum, const char isglobal ) + { + int lc; + char match_found = 0; + + set_current_addr( first_addr - 1 ); + for( lc = 0; lc <= second_addr - first_addr; ++lc ) + { + line_t *lp = search_line_node( inc_current_addr() ); + int len = replace_matching_text( lp, gflags, snum ); + if( len < 0 ) return 0; + if( len ) + { + const char *txt = rbuf; + const char *eot = rbuf + len; + undo_t *up = 0; + disable_interrupts(); + if( !delete_lines( current_addr(), current_addr(), isglobal ) ) return 0; + do { + txt = put_sbuf_line( txt, current_addr() ); + if( !txt ) { enable_interrupts(); return 0; } + if( up ) up->tail = search_line_node( current_addr() ); + else if( !( up = push_undo_atom( UADD, -1, -1 ) ) ) + { enable_interrupts(); return 0; } + } + while( txt != eot ); + enable_interrupts(); + match_found = 1; + } + } + if( !match_found && !( gflags & GLB ) ) + { set_error_msg( "No match" ); return 0; } + return 1; + } diff --git a/signal.c b/signal.c new file mode 100644 index 0000000..c047124 --- /dev/null +++ b/signal.c @@ -0,0 +1,259 @@ +/* signal.c: signal and miscellaneous routines for the ed line editor. */ +/* GNU ed - The GNU line editor. + Copyright (C) 1993, 1994 Andrew Moore, Talke Studio + Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ed.h" + + +jmp_buf jmp_state; +static int mutex = 0; /* If set, signals stay pending */ +static int window_lines_ = 22; /* scroll length: ws_row - 2 */ +static int window_columns_ = 72; +static char sighup_pending = 0; +static char sigint_pending = 0; + + +static void sighup_handler( int signum ) + { + signum = 0; /* keep compiler happy */ + if( mutex ) sighup_pending = 1; + else + { + char hb[] = "ed.hup"; + sighup_pending = 0; + if( last_addr() && modified() && + write_file( hb, "w", 1, last_addr() ) < 0 ) + { + char *s = getenv( "HOME" ); + int n = ( s ? strlen( s ) : 0 ); + int m = ( ( !n || *( s + n - 1 ) != '/' ) ? 1 : 0 ); + char *hup = ( ( n + m + (int)sizeof( hb ) < path_max( 0 ) ) ? + ( char *) malloc( n + m + sizeof( hb ) ) : 0 ); + if( n && hup ) /* hup filename */ + { + memcpy( hup, s, n ); + if( m ) memcpy( hup + n, "/", 1 ); + memcpy( hup + n + m, hb, sizeof( hb ) ); + if( write_file( hup, "w", 1, last_addr() ) >= 0 ) exit( 0 ); + } + exit( 1 ); /* hup file write failed */ + } + exit( 0 ); + } + } + + +static void sigint_handler( int signum ) + { + if( mutex ) sigint_pending = 1; + else + { + sigset_t set; + sigint_pending = 0; + sigemptyset( &set ); + sigaddset( &set, signum ); + sigprocmask( SIG_UNBLOCK, &set, 0 ); + longjmp( jmp_state, -1 ); + } + } + + +static void sigwinch_handler( int signum ) + { +#ifdef TIOCGWINSZ + struct winsize ws; /* window size structure */ + + if( ioctl( 0, TIOCGWINSZ, (char *) &ws ) >= 0 ) + { + /* Sanity check values of environment vars */ + if( ws.ws_row > 2 && ws.ws_row < 600 ) window_lines_ = ws.ws_row - 2; + if( ws.ws_col > 8 && ws.ws_col < 1800 ) window_columns_ = ws.ws_col - 8; + } +#endif + signum = 0; /* keep compiler happy */ + } + + +static int set_signal( int signum, void (*handler )( int ) ) + { + struct sigaction new_action; + + new_action.sa_handler = handler; + sigemptyset( &new_action.sa_mask ); +#ifdef SA_RESTART + new_action.sa_flags = SA_RESTART; +#else + new_action.sa_flags = 0; +#endif + return sigaction( signum, &new_action, 0 ); + } + + +void enable_interrupts( void ) + { + if( --mutex <= 0 ) + { + mutex = 0; + if( sighup_pending ) sighup_handler( SIGHUP ); + if( sigint_pending ) sigint_handler( SIGINT ); + } + } + + +void disable_interrupts( void ) { ++mutex; } + + +void set_signals( void ) + { +#ifdef SIGWINCH + sigwinch_handler( SIGWINCH ); + if( isatty( 0 ) ) set_signal( SIGWINCH, sigwinch_handler ); +#endif + set_signal( SIGHUP, sighup_handler ); + set_signal( SIGQUIT, SIG_IGN ); + set_signal( SIGINT, sigint_handler ); + } + + +void set_window_lines( const int lines ) { window_lines_ = lines; } +int window_columns( void ) { return window_columns_; } +int window_lines( void ) { return window_lines_; } + + +/* convert a string to int with out_of_range detection */ +char parse_int( int *i, const char *str, const char **tail ) + { + char *tmp; + errno = 0; + *i = strtol( str, &tmp, 10 ); + if( tail ) *tail = tmp; + if( tmp == str ) + { + set_error_msg( "Bad numerical result" ); + *i = 0; + return 0; + } + if( errno == ERANGE ) + { + set_error_msg( "Numerical result out of range" ); + *i = 0; + return 0; + } + return 1; + } + + +/* assure at least a minimum size for buffer `buf' */ +char resize_buffer( char **buf, int *size, int min_size ) + { + if( *size < min_size ) + { + const int new_size = ( min_size < 512 ? 512 : ( min_size / 512 ) * 1024 ); + void *new_buf = 0; + disable_interrupts(); + if( *buf ) new_buf = realloc( *buf, new_size ); + else new_buf = malloc( new_size ); + if( !new_buf ) + { + show_strerror( 0, errno ); + set_error_msg( "Memory exhausted" ); + enable_interrupts(); + return 0; + } + *size = new_size; + *buf = (char *)new_buf; + enable_interrupts(); + } + return 1; + } + + +/* assure at least a minimum size for buffer `buf' */ +char resize_line_buffer( const line_t ***buf, int *size, int min_size ) + { + if( *size < min_size ) + { + const int new_size = ( min_size < 512 ? 512 : ( min_size / 512 ) * 1024 ); + void *new_buf = 0; + disable_interrupts(); + if( *buf ) new_buf = realloc( *buf, new_size ); + else new_buf = malloc( new_size ); + if( !new_buf ) + { + show_strerror( 0, errno ); + set_error_msg( "Memory exhausted" ); + enable_interrupts(); + return 0; + } + *size = new_size; + *buf = (const line_t **)new_buf; + enable_interrupts(); + } + return 1; + } + + +/* assure at least a minimum size for buffer `buf' */ +char resize_undo_buffer( undo_t **buf, int *size, int min_size ) + { + if( *size < min_size ) + { + const int new_size = ( min_size < 512 ? 512 : ( min_size / 512 ) * 1024 ); + void *new_buf = 0; + disable_interrupts(); + if( *buf ) new_buf = realloc( *buf, new_size ); + else new_buf = malloc( new_size ); + if( !new_buf ) + { + show_strerror( 0, errno ); + set_error_msg( "Memory exhausted" ); + enable_interrupts(); + return 0; + } + *size = new_size; + *buf = (undo_t *)new_buf; + enable_interrupts(); + } + return 1; + } + + +/* return unescaped copy of escaped string */ +const char *strip_escapes( const char *s ) + { + static char *buf = 0; + static int bufsz = 0; + const int len = strlen( s ); + + int i = 0; + + if( !resize_buffer( &buf, &bufsz, len + 1 ) ) return 0; + /* assert: no trailing escape */ + while( ( buf[i++] = ( (*s == '\\' ) ? *++s : *s ) ) ) + s++; + return buf; + } diff --git a/testsuite/=.err.posix b/testsuite/=.err.posix new file mode 100644 index 0000000..6a60559 --- /dev/null +++ b/testsuite/=.err.posix @@ -0,0 +1 @@ +1,$= diff --git a/testsuite/a.d b/testsuite/a.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/a.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/a.r b/testsuite/a.r new file mode 100644 index 0000000..26257bd --- /dev/null +++ b/testsuite/a.r @@ -0,0 +1,8 @@ +hello world +line 1 +hello world! +line 2 +line 3 +line 4 +line5 +hello world!! diff --git a/testsuite/a.t b/testsuite/a.t new file mode 100644 index 0000000..ac98c40 --- /dev/null +++ b/testsuite/a.t @@ -0,0 +1,9 @@ +0a +hello world +. +2a +hello world! +. +$a +hello world!! +. diff --git a/testsuite/a1.err.posix b/testsuite/a1.err.posix new file mode 100644 index 0000000..e80815f --- /dev/null +++ b/testsuite/a1.err.posix @@ -0,0 +1,3 @@ +1,$a +hello world +. diff --git a/testsuite/a2.err b/testsuite/a2.err new file mode 100644 index 0000000..ec4b00b --- /dev/null +++ b/testsuite/a2.err @@ -0,0 +1,3 @@ +aa +hello world +. diff --git a/testsuite/a2.pr b/testsuite/a2.pr new file mode 100644 index 0000000..ec4b00b --- /dev/null +++ b/testsuite/a2.pr @@ -0,0 +1,3 @@ +aa +hello world +. diff --git a/testsuite/addr.d b/testsuite/addr.d new file mode 100644 index 0000000..8f7ba1b --- /dev/null +++ b/testsuite/addr.d @@ -0,0 +1,9 @@ +line 1 +line 2 +line 3 +line 4 +line5 +1ine6 +line7 +line8 +line9 diff --git a/testsuite/addr.r b/testsuite/addr.r new file mode 100644 index 0000000..04caf17 --- /dev/null +++ b/testsuite/addr.r @@ -0,0 +1,2 @@ +line 2 +line9 diff --git a/testsuite/addr.t b/testsuite/addr.t new file mode 100644 index 0000000..750b224 --- /dev/null +++ b/testsuite/addr.t @@ -0,0 +1,5 @@ +1 d +1 1 d +1,2,d +1;+ + ,d +1,2;., + 2d diff --git a/testsuite/addr1.err b/testsuite/addr1.err new file mode 100644 index 0000000..29d6383 --- /dev/null +++ b/testsuite/addr1.err @@ -0,0 +1 @@ +100 diff --git a/testsuite/addr1.pr b/testsuite/addr1.pr new file mode 100644 index 0000000..29d6383 --- /dev/null +++ b/testsuite/addr1.pr @@ -0,0 +1 @@ +100 diff --git a/testsuite/addr2.err b/testsuite/addr2.err new file mode 100644 index 0000000..e96acb9 --- /dev/null +++ b/testsuite/addr2.err @@ -0,0 +1 @@ +-100 diff --git a/testsuite/addr2.pr b/testsuite/addr2.pr new file mode 100644 index 0000000..e96acb9 --- /dev/null +++ b/testsuite/addr2.pr @@ -0,0 +1 @@ +-100 diff --git a/testsuite/ascii.d b/testsuite/ascii.d new file mode 100644 index 0000000000000000000000000000000000000000..c86626638e0bc8cf47ca49bb1525b40e9737ee64 GIT binary patch literal 256 zcmV+b0ssC00RjUA1qKHQ2?`4g4Gs?w5fT#=6&4p585$cL9UdPbAtECrB_<~*DJm;0 zEiNxGF)}kWH8wXmIXXK$Jw87`K|(`BMMg(RNlHshO-@fxQBqS>RaRG6Sz23MU0z>c zVPa!sWoBn+X=-b1ZEkOHadLBXb#`}nd3t+%eSUv{fr5jCg@%WSiHeJijgF6yk&=^? zm6n&7nVOrNot~edp`xRtrKYE-sj922t*)=Iv9hzYwYImoxw^Z&y}rM|!NSAD#m2|T z$;!*j&Cbuz(bCh@)z;V8+1lIO-QM5e;o{@u<>u$;>FVq3?e6dJ@$&QZ_4fDp`TG0( G{r>;0_J4r@ literal 0 HcmV?d00001 diff --git a/testsuite/ascii.r b/testsuite/ascii.r new file mode 100644 index 0000000000000000000000000000000000000000..c86626638e0bc8cf47ca49bb1525b40e9737ee64 GIT binary patch literal 256 zcmV+b0ssC00RjUA1qKHQ2?`4g4Gs?w5fT#=6&4p585$cL9UdPbAtECrB_<~*DJm;0 zEiNxGF)}kWH8wXmIXXK$Jw87`K|(`BMMg(RNlHshO-@fxQBqS>RaRG6Sz23MU0z>c zVPa!sWoBn+X=-b1ZEkOHadLBXb#`}nd3t+%eSUv{fr5jCg@%WSiHeJijgF6yk&=^? zm6n&7nVOrNot~edp`xRtrKYE-sj922t*)=Iv9hzYwYImoxw^Z&y}rM|!NSAD#m2|T z$;!*j&Cbuz(bCh@)z;V8+1lIO-QM5e;o{@u<>u$;>FVq3?e6dJ@$&QZ_4fDp`TG0( G{r>;0_J4r@ literal 0 HcmV?d00001 diff --git a/testsuite/ascii.t b/testsuite/ascii.t new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/bang1.d b/testsuite/bang1.d new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/bang1.err b/testsuite/bang1.err new file mode 100644 index 0000000..630af90 --- /dev/null +++ b/testsuite/bang1.err @@ -0,0 +1 @@ +.!date diff --git a/testsuite/bang1.pr b/testsuite/bang1.pr new file mode 100644 index 0000000..630af90 --- /dev/null +++ b/testsuite/bang1.pr @@ -0,0 +1 @@ +.!date diff --git a/testsuite/bang1.r b/testsuite/bang1.r new file mode 100644 index 0000000..dcf02b2 --- /dev/null +++ b/testsuite/bang1.r @@ -0,0 +1 @@ +okay diff --git a/testsuite/bang1.t b/testsuite/bang1.t new file mode 100644 index 0000000..d7b1fea --- /dev/null +++ b/testsuite/bang1.t @@ -0,0 +1,5 @@ +!read one +hello, world +a +okay +. diff --git a/testsuite/bang2.err b/testsuite/bang2.err new file mode 100644 index 0000000..79d8956 --- /dev/null +++ b/testsuite/bang2.err @@ -0,0 +1 @@ +!! diff --git a/testsuite/bang2.pr b/testsuite/bang2.pr new file mode 100644 index 0000000..79d8956 --- /dev/null +++ b/testsuite/bang2.pr @@ -0,0 +1 @@ +!! diff --git a/testsuite/c.d b/testsuite/c.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/c.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/c.r b/testsuite/c.r new file mode 100644 index 0000000..0fb3e4f --- /dev/null +++ b/testsuite/c.r @@ -0,0 +1,4 @@ +at the top +between top/middle +in the middle +at the bottom diff --git a/testsuite/c.t b/testsuite/c.t new file mode 100644 index 0000000..5fba319 --- /dev/null +++ b/testsuite/c.t @@ -0,0 +1,12 @@ +0c +at the top +. +4c +in the middle +. +$c +at the bottom +. +2,3c +between top/middle +. diff --git a/testsuite/c1.err b/testsuite/c1.err new file mode 100644 index 0000000..658ec38 --- /dev/null +++ b/testsuite/c1.err @@ -0,0 +1,3 @@ +cc +hello world +. diff --git a/testsuite/c1.pr b/testsuite/c1.pr new file mode 100644 index 0000000..658ec38 --- /dev/null +++ b/testsuite/c1.pr @@ -0,0 +1,3 @@ +cc +hello world +. diff --git a/testsuite/check.sh b/testsuite/check.sh new file mode 100755 index 0000000..85b606b --- /dev/null +++ b/testsuite/check.sh @@ -0,0 +1,104 @@ +#! /bin/sh +# check script for GNU ed - The GNU line editor +# Copyright (C) 2006, 2007, 2008, 2009 Antonio Diaz Diaz. +# +# This script is free software; you have unlimited permission +# to copy, distribute and modify it. + +objdir=`pwd` +testdir=`cd "$1" ; pwd` +ED="${objdir}"/ed + +if [ ! -x "${ED}" ] ; then + echo "${ED}: cannot execute" + exit 1 +fi + +if [ -d tmp ] ; then rm -r tmp ; fi +mkdir tmp + +# Generate ed test scripts, with extensions .ed and .red, from +# .t and .err files, respectively. +echo "building test scripts for ed..." +cd "${testdir}" + +for i in *.t ; do + base=`echo "$i" | sed 's/\.t$//'` + ( + echo "#! /bin/sh" + echo "${ED} -s <<'EOT'" + echo H + echo "r ${testdir}/${base}.d" + cat "$i" + echo "w ${base}.o" + echo EOT + ) > "${objdir}/tmp/${base}.ed" + chmod u+x "${objdir}/tmp/${base}.ed" +done + +for i in *.err ; do + base=`echo "$i" | sed 's/\.err$//'` + ( + echo "#! /bin/sh -" + echo "${ED} -s <<'EOT'" + echo H + echo "r ${testdir}/${base}.err" + cat "$i" + echo "w ${base}.ro" + echo EOT + ) > "${objdir}/tmp/${base}.red" + chmod u+x "${objdir}/tmp/${base}.red" +done + + +# Run the .ed and .red scripts just generated +# and compare their output against the .r files, which contain +# the correct output. +echo "testing ed..." +cd "${objdir}"/tmp + +# Run the *.red scripts first, since these don't generate output; +# they exit with non-zero status +for i in *.red ; do + echo "$i" + if ./"$i" ; then + echo "*** The script $i exited abnormally ***" + fi +done > errs.ck 2>&1 + +# Run error scripts again as pipes - these should generate output and +# exit with error (>0) status. +for i in *.red ; do + base=`echo "$i" | sed 's/\.red$//'` + if cat ${base}.red | "${ED}" -s ; then + echo "*** The piped script $i exited abnormally ***" + else + if cmp -s ${base}.ro "${testdir}"/${base}.pr ; then + true + else + echo "*** Output ${base}.ro of piped script $i is incorrect ***" + fi + fi +done > pipes.ck 2>&1 + +# Run the remainding scripts; they exit with zero status +for i in *.ed ; do + base=`echo "$i" | sed 's/\.ed$//'` + if ./${base}.ed ; then + if cmp -s ${base}.o "${testdir}"/${base}.r ; then + true + else + echo "*** Output ${base}.o of script $i is incorrect ***" + fi + else + echo "*** The script $i exited abnormally ***" + fi +done > scripts.ck 2>&1 + +grep '\*\*\*' *.ck | sed 's/^[^*]*//' +if grep '\*\*\*' *.ck > /dev/null ; then + exit 127 +else + echo "tests completed successfully." + if cd "${objdir}" ; then rm -r tmp ; fi +fi diff --git a/testsuite/comment.d b/testsuite/comment.d new file mode 100644 index 0000000..ec1e35a --- /dev/null +++ b/testsuite/comment.d @@ -0,0 +1,6 @@ +hello +world +this is a simple +line of text +for testing the comment +command in global lists diff --git a/testsuite/comment.r b/testsuite/comment.r new file mode 100644 index 0000000..ae60d9d --- /dev/null +++ b/testsuite/comment.r @@ -0,0 +1,6 @@ +heylo +woryd +this is a simpye +yine of text +for testing the comment +command in gyobal lists diff --git a/testsuite/comment.t b/testsuite/comment.t new file mode 100644 index 0000000..ab873f8 --- /dev/null +++ b/testsuite/comment.t @@ -0,0 +1,5 @@ +# lines beginning with a `#' should be ignored +g/./# including in global commands \ +s/l/x/\ +# and in the command list \ +s/x/y/ diff --git a/testsuite/d.d b/testsuite/d.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/d.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/d.err b/testsuite/d.err new file mode 100644 index 0000000..f03f694 --- /dev/null +++ b/testsuite/d.err @@ -0,0 +1 @@ +dd diff --git a/testsuite/d.pr b/testsuite/d.pr new file mode 100644 index 0000000..f03f694 --- /dev/null +++ b/testsuite/d.pr @@ -0,0 +1 @@ +dd diff --git a/testsuite/d.r b/testsuite/d.r new file mode 100644 index 0000000..b7e242c --- /dev/null +++ b/testsuite/d.r @@ -0,0 +1 @@ +line 2 diff --git a/testsuite/d.t b/testsuite/d.t new file mode 100644 index 0000000..c7c473f --- /dev/null +++ b/testsuite/d.t @@ -0,0 +1,3 @@ +1d +2;+1d +$d diff --git a/testsuite/e1.d b/testsuite/e1.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/e1.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/e1.err b/testsuite/e1.err new file mode 100644 index 0000000..827cc29 --- /dev/null +++ b/testsuite/e1.err @@ -0,0 +1 @@ +ee e1.err diff --git a/testsuite/e1.pr b/testsuite/e1.pr new file mode 100644 index 0000000..827cc29 --- /dev/null +++ b/testsuite/e1.pr @@ -0,0 +1 @@ +ee e1.err diff --git a/testsuite/e1.r b/testsuite/e1.r new file mode 100644 index 0000000..298e1f4 --- /dev/null +++ b/testsuite/e1.r @@ -0,0 +1,4 @@ +E e1.ed +1;/H/+d +w e1.o +EOT diff --git a/testsuite/e1.t b/testsuite/e1.t new file mode 100644 index 0000000..a45f9d2 --- /dev/null +++ b/testsuite/e1.t @@ -0,0 +1,2 @@ +E e1.ed +1;/H/+d diff --git a/testsuite/e2.d b/testsuite/e2.d new file mode 100644 index 0000000..aa44630 --- /dev/null +++ b/testsuite/e2.d @@ -0,0 +1 @@ +E !echo hello world- diff --git a/testsuite/e2.err b/testsuite/e2.err new file mode 100644 index 0000000..779a64b --- /dev/null +++ b/testsuite/e2.err @@ -0,0 +1 @@ +.e e2.err diff --git a/testsuite/e2.pr b/testsuite/e2.pr new file mode 100644 index 0000000..779a64b --- /dev/null +++ b/testsuite/e2.pr @@ -0,0 +1 @@ +.e e2.err diff --git a/testsuite/e2.r b/testsuite/e2.r new file mode 100644 index 0000000..59ebf11 --- /dev/null +++ b/testsuite/e2.r @@ -0,0 +1 @@ +hello world- diff --git a/testsuite/e2.t b/testsuite/e2.t new file mode 100644 index 0000000..aa44630 --- /dev/null +++ b/testsuite/e2.t @@ -0,0 +1 @@ +E !echo hello world- diff --git a/testsuite/e3.d b/testsuite/e3.d new file mode 100644 index 0000000..aa44630 --- /dev/null +++ b/testsuite/e3.d @@ -0,0 +1 @@ +E !echo hello world- diff --git a/testsuite/e3.err b/testsuite/e3.err new file mode 100644 index 0000000..80a7fdc --- /dev/null +++ b/testsuite/e3.err @@ -0,0 +1 @@ +ee.err diff --git a/testsuite/e3.pr b/testsuite/e3.pr new file mode 100644 index 0000000..80a7fdc --- /dev/null +++ b/testsuite/e3.pr @@ -0,0 +1 @@ +ee.err diff --git a/testsuite/e3.r b/testsuite/e3.r new file mode 100644 index 0000000..aa44630 --- /dev/null +++ b/testsuite/e3.r @@ -0,0 +1 @@ +E !echo hello world- diff --git a/testsuite/e3.t b/testsuite/e3.t new file mode 100644 index 0000000..1c50726 --- /dev/null +++ b/testsuite/e3.t @@ -0,0 +1 @@ +E diff --git a/testsuite/e4.d b/testsuite/e4.d new file mode 100644 index 0000000..aa44630 --- /dev/null +++ b/testsuite/e4.d @@ -0,0 +1 @@ +E !echo hello world- diff --git a/testsuite/e4.r b/testsuite/e4.r new file mode 100644 index 0000000..aa44630 --- /dev/null +++ b/testsuite/e4.r @@ -0,0 +1 @@ +E !echo hello world- diff --git a/testsuite/e4.t b/testsuite/e4.t new file mode 100644 index 0000000..d905d9d --- /dev/null +++ b/testsuite/e4.t @@ -0,0 +1 @@ +e diff --git a/testsuite/f1.err b/testsuite/f1.err new file mode 100644 index 0000000..e60975a --- /dev/null +++ b/testsuite/f1.err @@ -0,0 +1 @@ +.f f1.err diff --git a/testsuite/f1.pr b/testsuite/f1.pr new file mode 100644 index 0000000..e60975a --- /dev/null +++ b/testsuite/f1.pr @@ -0,0 +1 @@ +.f f1.err diff --git a/testsuite/f2.err b/testsuite/f2.err new file mode 100644 index 0000000..26d1c5e --- /dev/null +++ b/testsuite/f2.err @@ -0,0 +1 @@ +ff1.err diff --git a/testsuite/f2.pr b/testsuite/f2.pr new file mode 100644 index 0000000..26d1c5e --- /dev/null +++ b/testsuite/f2.pr @@ -0,0 +1 @@ +ff1.err diff --git a/testsuite/g1.d b/testsuite/g1.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/g1.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/g1.err b/testsuite/g1.err new file mode 100644 index 0000000..f95ea22 --- /dev/null +++ b/testsuite/g1.err @@ -0,0 +1 @@ +g/./s //x/ diff --git a/testsuite/g1.pr b/testsuite/g1.pr new file mode 100644 index 0000000..f95ea22 --- /dev/null +++ b/testsuite/g1.pr @@ -0,0 +1 @@ +g/./s //x/ diff --git a/testsuite/g1.r b/testsuite/g1.r new file mode 100644 index 0000000..578a44b --- /dev/null +++ b/testsuite/g1.r @@ -0,0 +1,15 @@ +line5 +help! world +order +line 4 +help! world +order +line 3 +help! world +order +line 2 +help! world +order +line 1 +help! world +order diff --git a/testsuite/g1.t b/testsuite/g1.t new file mode 100644 index 0000000..2d0b54f --- /dev/null +++ b/testsuite/g1.t @@ -0,0 +1,6 @@ +g/./m0 +g/./s/$/\ +hello world +g/hello /s/lo/p!/\ +a\ +order diff --git a/testsuite/g2.d b/testsuite/g2.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/g2.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/g2.err b/testsuite/g2.err new file mode 100644 index 0000000..0ff6a5a --- /dev/null +++ b/testsuite/g2.err @@ -0,0 +1 @@ +g//s/./x/ diff --git a/testsuite/g2.pr b/testsuite/g2.pr new file mode 100644 index 0000000..0ff6a5a --- /dev/null +++ b/testsuite/g2.pr @@ -0,0 +1 @@ +g//s/./x/ diff --git a/testsuite/g2.r b/testsuite/g2.r new file mode 100644 index 0000000..3b18e51 --- /dev/null +++ b/testsuite/g2.r @@ -0,0 +1 @@ +hello world diff --git a/testsuite/g2.t b/testsuite/g2.t new file mode 100644 index 0000000..831ee83 --- /dev/null +++ b/testsuite/g2.t @@ -0,0 +1,2 @@ +g/[2-4]/-1,+1c\ +hello world diff --git a/testsuite/g3.d b/testsuite/g3.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/g3.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/g3.err b/testsuite/g3.err new file mode 100644 index 0000000..01058d8 --- /dev/null +++ b/testsuite/g3.err @@ -0,0 +1 @@ +g diff --git a/testsuite/g3.pr b/testsuite/g3.pr new file mode 100644 index 0000000..01058d8 --- /dev/null +++ b/testsuite/g3.pr @@ -0,0 +1 @@ +g diff --git a/testsuite/g3.r b/testsuite/g3.r new file mode 100644 index 0000000..cc6fbdd --- /dev/null +++ b/testsuite/g3.r @@ -0,0 +1,5 @@ +linc 3 +xine 1 +xine 2 +xinc 4 +xinc5 diff --git a/testsuite/g3.t b/testsuite/g3.t new file mode 100644 index 0000000..2d052a6 --- /dev/null +++ b/testsuite/g3.t @@ -0,0 +1,4 @@ +g/./s//x/\ +3m0 +g/./s/e/c/\ +2,3m1 diff --git a/testsuite/g4.d b/testsuite/g4.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/g4.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/g4.r b/testsuite/g4.r new file mode 100644 index 0000000..350882d --- /dev/null +++ b/testsuite/g4.r @@ -0,0 +1,7 @@ +hello +zine 1 +line 2 +line 3 +line 4 +line5 +world diff --git a/testsuite/g4.t b/testsuite/g4.t new file mode 100644 index 0000000..ec61816 --- /dev/null +++ b/testsuite/g4.t @@ -0,0 +1,13 @@ +g/./s/./x/\ +u\ +s/./y/\ +u\ +s/./z/\ +u +u +0a +hello +. +$a +world +. diff --git a/testsuite/g5.d b/testsuite/g5.d new file mode 100644 index 0000000..a92d664 --- /dev/null +++ b/testsuite/g5.d @@ -0,0 +1,3 @@ +line 1 +line 2 +line 3 diff --git a/testsuite/g5.r b/testsuite/g5.r new file mode 100644 index 0000000..15a2675 --- /dev/null +++ b/testsuite/g5.r @@ -0,0 +1,9 @@ +line 1 +line 2 +line 3 +line 2 +line 3 +line 1 +line 3 +line 1 +line 2 diff --git a/testsuite/g5.t b/testsuite/g5.t new file mode 100644 index 0000000..e213481 --- /dev/null +++ b/testsuite/g5.t @@ -0,0 +1,2 @@ +g/./1,3t$\ +1d diff --git a/testsuite/h.err b/testsuite/h.err new file mode 100644 index 0000000..a71e506 --- /dev/null +++ b/testsuite/h.err @@ -0,0 +1 @@ +.h diff --git a/testsuite/h.pr b/testsuite/h.pr new file mode 100644 index 0000000..a71e506 --- /dev/null +++ b/testsuite/h.pr @@ -0,0 +1 @@ +.h diff --git a/testsuite/i.d b/testsuite/i.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/i.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/i.r b/testsuite/i.r new file mode 100644 index 0000000..5f27af0 --- /dev/null +++ b/testsuite/i.r @@ -0,0 +1,8 @@ +hello world +hello world! +line 1 +line 2 +line 3 +line 4 +hello world!! +line5 diff --git a/testsuite/i.t b/testsuite/i.t new file mode 100644 index 0000000..6de2233 --- /dev/null +++ b/testsuite/i.t @@ -0,0 +1,9 @@ +0i +hello world +. +2i +hello world! +. +$i +hello world!! +. diff --git a/testsuite/i1.err.posix b/testsuite/i1.err.posix new file mode 100644 index 0000000..aaddede --- /dev/null +++ b/testsuite/i1.err.posix @@ -0,0 +1,3 @@ +1,$i +hello world +. diff --git a/testsuite/i2.err b/testsuite/i2.err new file mode 100644 index 0000000..b63f5ac --- /dev/null +++ b/testsuite/i2.err @@ -0,0 +1,3 @@ +ii +hello world +. diff --git a/testsuite/i2.pr b/testsuite/i2.pr new file mode 100644 index 0000000..b63f5ac --- /dev/null +++ b/testsuite/i2.pr @@ -0,0 +1,3 @@ +ii +hello world +. diff --git a/testsuite/j.d b/testsuite/j.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/j.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/j.r b/testsuite/j.r new file mode 100644 index 0000000..66f36a8 --- /dev/null +++ b/testsuite/j.r @@ -0,0 +1,4 @@ +line 1 +line 2line 3 +line 4 +line5 diff --git a/testsuite/j.t b/testsuite/j.t new file mode 100644 index 0000000..9b5d28d --- /dev/null +++ b/testsuite/j.t @@ -0,0 +1,2 @@ +1,1j +2,3j diff --git a/testsuite/k.d b/testsuite/k.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/k.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/k.r b/testsuite/k.r new file mode 100644 index 0000000..eeb38db --- /dev/null +++ b/testsuite/k.r @@ -0,0 +1,5 @@ +line 3 +hello world +line 4 +line5 +line 2 diff --git a/testsuite/k.t b/testsuite/k.t new file mode 100644 index 0000000..53d588d --- /dev/null +++ b/testsuite/k.t @@ -0,0 +1,10 @@ +2ka +1d +'am$ +1ka +0a +hello world +. +'ad +u +'am0 diff --git a/testsuite/k1.err.posix b/testsuite/k1.err.posix new file mode 100644 index 0000000..eba1f3d --- /dev/null +++ b/testsuite/k1.err.posix @@ -0,0 +1 @@ +1,$ka diff --git a/testsuite/k2.err b/testsuite/k2.err new file mode 100644 index 0000000..b34a18d --- /dev/null +++ b/testsuite/k2.err @@ -0,0 +1 @@ +kA diff --git a/testsuite/k2.pr b/testsuite/k2.pr new file mode 100644 index 0000000..b34a18d --- /dev/null +++ b/testsuite/k2.pr @@ -0,0 +1 @@ +kA diff --git a/testsuite/k3.err b/testsuite/k3.err new file mode 100644 index 0000000..70190c4 --- /dev/null +++ b/testsuite/k3.err @@ -0,0 +1 @@ +0ka diff --git a/testsuite/k3.pr b/testsuite/k3.pr new file mode 100644 index 0000000..70190c4 --- /dev/null +++ b/testsuite/k3.pr @@ -0,0 +1 @@ +0ka diff --git a/testsuite/k4.err b/testsuite/k4.err new file mode 100644 index 0000000..3457642 --- /dev/null +++ b/testsuite/k4.err @@ -0,0 +1,6 @@ +a +hello +. +.ka +'ad +'ap diff --git a/testsuite/k4.pr b/testsuite/k4.pr new file mode 100644 index 0000000..3457642 --- /dev/null +++ b/testsuite/k4.pr @@ -0,0 +1,6 @@ +a +hello +. +.ka +'ad +'ap diff --git a/testsuite/l.d b/testsuite/l.d new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/l.r b/testsuite/l.r new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/l.t b/testsuite/l.t new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/m.d b/testsuite/m.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/m.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/m.err b/testsuite/m.err new file mode 100644 index 0000000..3aec4c3 --- /dev/null +++ b/testsuite/m.err @@ -0,0 +1,4 @@ +a +hello world +. +1,$m1 diff --git a/testsuite/m.pr b/testsuite/m.pr new file mode 100644 index 0000000..edbb96f --- /dev/null +++ b/testsuite/m.pr @@ -0,0 +1,5 @@ +a +hello world +. +1,$m1 +hello world diff --git a/testsuite/m.r b/testsuite/m.r new file mode 100644 index 0000000..186cf54 --- /dev/null +++ b/testsuite/m.r @@ -0,0 +1,5 @@ +line5 +line 1 +line 2 +line 3 +line 4 diff --git a/testsuite/m.t b/testsuite/m.t new file mode 100644 index 0000000..c39c088 --- /dev/null +++ b/testsuite/m.t @@ -0,0 +1,7 @@ +1,2m$ +1,2m$ +1,2m$ +$m0 +$m0 +2,3m1 +2,3m3 diff --git a/testsuite/n.d b/testsuite/n.d new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/n.r b/testsuite/n.r new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/n.t b/testsuite/n.t new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/nl.err b/testsuite/nl.err new file mode 100644 index 0000000..8949a85 --- /dev/null +++ b/testsuite/nl.err @@ -0,0 +1 @@ +,1 diff --git a/testsuite/nl.pr b/testsuite/nl.pr new file mode 100644 index 0000000..8949a85 --- /dev/null +++ b/testsuite/nl.pr @@ -0,0 +1 @@ +,1 diff --git a/testsuite/nl1.d b/testsuite/nl1.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/nl1.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/nl1.r b/testsuite/nl1.r new file mode 100644 index 0000000..9d8854c --- /dev/null +++ b/testsuite/nl1.r @@ -0,0 +1,8 @@ + + +hello world +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/nl1.t b/testsuite/nl1.t new file mode 100644 index 0000000..ea192e9 --- /dev/null +++ b/testsuite/nl1.t @@ -0,0 +1,8 @@ +1 + + +0a + + +hello world +. diff --git a/testsuite/nl2.d b/testsuite/nl2.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/nl2.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/nl2.r b/testsuite/nl2.r new file mode 100644 index 0000000..fe99e41 --- /dev/null +++ b/testsuite/nl2.r @@ -0,0 +1,6 @@ +line 1 +line 2 +line 3 +line 4 +line5 +hello world diff --git a/testsuite/nl2.t b/testsuite/nl2.t new file mode 100644 index 0000000..73fd27b --- /dev/null +++ b/testsuite/nl2.t @@ -0,0 +1,4 @@ +a +hello world +. +0;/./ diff --git a/testsuite/p.d b/testsuite/p.d new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/p.r b/testsuite/p.r new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/p.t b/testsuite/p.t new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/q.d b/testsuite/q.d new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/q.r b/testsuite/q.r new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/q.t b/testsuite/q.t new file mode 100644 index 0000000..123a2c8 --- /dev/null +++ b/testsuite/q.t @@ -0,0 +1,5 @@ +w q.o +a +hello +. +q diff --git a/testsuite/q1.err b/testsuite/q1.err new file mode 100644 index 0000000..0a7e178 --- /dev/null +++ b/testsuite/q1.err @@ -0,0 +1 @@ +.q diff --git a/testsuite/q1.pr b/testsuite/q1.pr new file mode 100644 index 0000000..0a7e178 --- /dev/null +++ b/testsuite/q1.pr @@ -0,0 +1 @@ +.q diff --git a/testsuite/r1.d b/testsuite/r1.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/r1.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/r1.err.posix b/testsuite/r1.err.posix new file mode 100644 index 0000000..269aa7c --- /dev/null +++ b/testsuite/r1.err.posix @@ -0,0 +1 @@ +1,$r r1.err diff --git a/testsuite/r1.r b/testsuite/r1.r new file mode 100644 index 0000000..a3ff506 --- /dev/null +++ b/testsuite/r1.r @@ -0,0 +1,7 @@ +line 1 +hello world +line 2 +line 3 +line 4 +line5 +hello world diff --git a/testsuite/r1.t b/testsuite/r1.t new file mode 100644 index 0000000..d787a92 --- /dev/null +++ b/testsuite/r1.t @@ -0,0 +1,3 @@ +1;r !echo hello world +1 +r !echo hello world diff --git a/testsuite/r2.d b/testsuite/r2.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/r2.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/r2.err b/testsuite/r2.err new file mode 100644 index 0000000..1c44fa3 --- /dev/null +++ b/testsuite/r2.err @@ -0,0 +1 @@ +r a-good-book diff --git a/testsuite/r2.pr b/testsuite/r2.pr new file mode 100644 index 0000000..1c44fa3 --- /dev/null +++ b/testsuite/r2.pr @@ -0,0 +1 @@ +r a-good-book diff --git a/testsuite/r2.r b/testsuite/r2.r new file mode 100644 index 0000000..ac152ba --- /dev/null +++ b/testsuite/r2.r @@ -0,0 +1,10 @@ +line 1 +line 2 +line 3 +line 4 +line5 +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/r2.t b/testsuite/r2.t new file mode 100644 index 0000000..4286f42 --- /dev/null +++ b/testsuite/r2.t @@ -0,0 +1 @@ +r diff --git a/testsuite/r3.d b/testsuite/r3.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/r3.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/r3.r b/testsuite/r3.r new file mode 100644 index 0000000..d925d88 --- /dev/null +++ b/testsuite/r3.r @@ -0,0 +1,4 @@ +r r3.ed +1;/H/+d +w r3.o +EOT diff --git a/testsuite/r3.t b/testsuite/r3.t new file mode 100644 index 0000000..cdc206d --- /dev/null +++ b/testsuite/r3.t @@ -0,0 +1,2 @@ +r r3.ed +1;/H/+d diff --git a/testsuite/s1.d b/testsuite/s1.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/s1.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/s1.err b/testsuite/s1.err new file mode 100644 index 0000000..d7ca0cf --- /dev/null +++ b/testsuite/s1.err @@ -0,0 +1 @@ +s . x diff --git a/testsuite/s1.pr b/testsuite/s1.pr new file mode 100644 index 0000000..d7ca0cf --- /dev/null +++ b/testsuite/s1.pr @@ -0,0 +1 @@ +s . x diff --git a/testsuite/s1.r b/testsuite/s1.r new file mode 100644 index 0000000..4eb0980 --- /dev/null +++ b/testsuite/s1.r @@ -0,0 +1,5 @@ +liene 1 +(liene) (2) +(liene) (3) +liene (4) +(()liene5) diff --git a/testsuite/s1.t b/testsuite/s1.t new file mode 100644 index 0000000..cca3dcc --- /dev/null +++ b/testsuite/s1.t @@ -0,0 +1,6 @@ +s/\([^ ][^ ]*\)/(\1)/g +2s +/3/s +/\(4\)/sr +/\(.\)/srg +,s/i/&e/ diff --git a/testsuite/s10.err b/testsuite/s10.err new file mode 100644 index 0000000..0d8d83d --- /dev/null +++ b/testsuite/s10.err @@ -0,0 +1,4 @@ +a +hello +. +s/[h[.]/x/ diff --git a/testsuite/s10.pr b/testsuite/s10.pr new file mode 100644 index 0000000..1304de1 --- /dev/null +++ b/testsuite/s10.pr @@ -0,0 +1,5 @@ +a +hello +. +s/[h[.]/x/ +hello diff --git a/testsuite/s2.d b/testsuite/s2.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/s2.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/s2.err b/testsuite/s2.err new file mode 100644 index 0000000..b5c851d --- /dev/null +++ b/testsuite/s2.err @@ -0,0 +1,4 @@ +a +a +. +s/x*/a/g diff --git a/testsuite/s2.pr b/testsuite/s2.pr new file mode 100644 index 0000000..949ac99 --- /dev/null +++ b/testsuite/s2.pr @@ -0,0 +1,5 @@ +a +a +. +s/x*/a/g +a diff --git a/testsuite/s2.r b/testsuite/s2.r new file mode 100644 index 0000000..ca305c8 --- /dev/null +++ b/testsuite/s2.r @@ -0,0 +1,5 @@ +li(n)e 1 +i(n)e 200 +li(n)e 3 +li(n)e 4 +li(n)e500 diff --git a/testsuite/s2.t b/testsuite/s2.t new file mode 100644 index 0000000..f365849 --- /dev/null +++ b/testsuite/s2.t @@ -0,0 +1,4 @@ +,s/./(&)/3 +s/$/00 +2s//%/g +s/^l diff --git a/testsuite/s3.d b/testsuite/s3.d new file mode 100644 index 0000000..e69de29 diff --git a/testsuite/s3.err b/testsuite/s3.err new file mode 100644 index 0000000..d68c7d0 --- /dev/null +++ b/testsuite/s3.err @@ -0,0 +1 @@ +s/[xyx/a/ diff --git a/testsuite/s3.pr b/testsuite/s3.pr new file mode 100644 index 0000000..d68c7d0 --- /dev/null +++ b/testsuite/s3.pr @@ -0,0 +1 @@ +s/[xyx/a/ diff --git a/testsuite/s3.r b/testsuite/s3.r new file mode 100644 index 0000000..d6cada2 --- /dev/null +++ b/testsuite/s3.r @@ -0,0 +1 @@ +hello world diff --git a/testsuite/s3.t b/testsuite/s3.t new file mode 100644 index 0000000..fbf8803 --- /dev/null +++ b/testsuite/s3.t @@ -0,0 +1,6 @@ +a +hello/[]world +. +s/[/]/ / +s/[[:digit:][]/ / +s/[]]/ / diff --git a/testsuite/s4.err b/testsuite/s4.err new file mode 100644 index 0000000..35b609f --- /dev/null +++ b/testsuite/s4.err @@ -0,0 +1 @@ +s/\a\b\c/xyz/ diff --git a/testsuite/s4.pr b/testsuite/s4.pr new file mode 100644 index 0000000..35b609f --- /dev/null +++ b/testsuite/s4.pr @@ -0,0 +1 @@ +s/\a\b\c/xyz/ diff --git a/testsuite/s5.err b/testsuite/s5.err new file mode 100644 index 0000000..89104c5 --- /dev/null +++ b/testsuite/s5.err @@ -0,0 +1 @@ +s//xyz/ diff --git a/testsuite/s5.pr b/testsuite/s5.pr new file mode 100644 index 0000000..89104c5 --- /dev/null +++ b/testsuite/s5.pr @@ -0,0 +1 @@ +s//xyz/ diff --git a/testsuite/s6.err b/testsuite/s6.err new file mode 100644 index 0000000..b478595 --- /dev/null +++ b/testsuite/s6.err @@ -0,0 +1 @@ +s diff --git a/testsuite/s6.pr b/testsuite/s6.pr new file mode 100644 index 0000000..b478595 --- /dev/null +++ b/testsuite/s6.pr @@ -0,0 +1 @@ +s diff --git a/testsuite/s7.err b/testsuite/s7.err new file mode 100644 index 0000000..30ba4fd --- /dev/null +++ b/testsuite/s7.err @@ -0,0 +1,5 @@ +a +hello world +. +/./ +sr diff --git a/testsuite/s7.pr b/testsuite/s7.pr new file mode 100644 index 0000000..47a94c3 --- /dev/null +++ b/testsuite/s7.pr @@ -0,0 +1,6 @@ +a +hello world +. +/./ +sr +hello world diff --git a/testsuite/s8.err b/testsuite/s8.err new file mode 100644 index 0000000..5665767 --- /dev/null +++ b/testsuite/s8.err @@ -0,0 +1,4 @@ +a +hello +. +s/[h[=]/x/ diff --git a/testsuite/s8.pr b/testsuite/s8.pr new file mode 100644 index 0000000..ec6a965 --- /dev/null +++ b/testsuite/s8.pr @@ -0,0 +1,5 @@ +a +hello +. +s/[h[=]/x/ +hello diff --git a/testsuite/s9.err b/testsuite/s9.err new file mode 100644 index 0000000..1ff16dd --- /dev/null +++ b/testsuite/s9.err @@ -0,0 +1,4 @@ +a +hello +. +s/[h[:]/x/ diff --git a/testsuite/s9.pr b/testsuite/s9.pr new file mode 100644 index 0000000..f22b3b3 --- /dev/null +++ b/testsuite/s9.pr @@ -0,0 +1,5 @@ +a +hello +. +s/[h[:]/x/ +hello diff --git a/testsuite/t.d b/testsuite/t.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/t.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/t.r b/testsuite/t.r new file mode 100644 index 0000000..2b28547 --- /dev/null +++ b/testsuite/t.r @@ -0,0 +1,16 @@ +line 1 +line 1 +line 1 +line 2 +line 2 +line 3 +line 4 +line5 +line 1 +line 1 +line 1 +line 2 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/t1.d b/testsuite/t1.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/t1.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/t1.err b/testsuite/t1.err new file mode 100644 index 0000000..c49c556 --- /dev/null +++ b/testsuite/t1.err @@ -0,0 +1 @@ +tt diff --git a/testsuite/t1.pr b/testsuite/t1.pr new file mode 100644 index 0000000..c49c556 --- /dev/null +++ b/testsuite/t1.pr @@ -0,0 +1 @@ +tt diff --git a/testsuite/t1.r b/testsuite/t1.r new file mode 100644 index 0000000..2b28547 --- /dev/null +++ b/testsuite/t1.r @@ -0,0 +1,16 @@ +line 1 +line 1 +line 1 +line 2 +line 2 +line 3 +line 4 +line5 +line 1 +line 1 +line 1 +line 2 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/t1.t b/testsuite/t1.t new file mode 100644 index 0000000..6b66163 --- /dev/null +++ b/testsuite/t1.t @@ -0,0 +1,3 @@ +1t0 +2,3t2 +,t$ diff --git a/testsuite/t2.d b/testsuite/t2.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/t2.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/t2.err b/testsuite/t2.err new file mode 100644 index 0000000..c202051 --- /dev/null +++ b/testsuite/t2.err @@ -0,0 +1 @@ +t0;-1 diff --git a/testsuite/t2.pr b/testsuite/t2.pr new file mode 100644 index 0000000..c202051 --- /dev/null +++ b/testsuite/t2.pr @@ -0,0 +1 @@ +t0;-1 diff --git a/testsuite/t2.r b/testsuite/t2.r new file mode 100644 index 0000000..0c75ff5 --- /dev/null +++ b/testsuite/t2.r @@ -0,0 +1,6 @@ +line 1 +line5 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/t2.t b/testsuite/t2.t new file mode 100644 index 0000000..5175abd --- /dev/null +++ b/testsuite/t2.t @@ -0,0 +1 @@ +t0;/./ diff --git a/testsuite/u.d b/testsuite/u.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/u.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/u.err b/testsuite/u.err new file mode 100644 index 0000000..caa1ba1 --- /dev/null +++ b/testsuite/u.err @@ -0,0 +1 @@ +.u diff --git a/testsuite/u.pr b/testsuite/u.pr new file mode 100644 index 0000000..caa1ba1 --- /dev/null +++ b/testsuite/u.pr @@ -0,0 +1 @@ +.u diff --git a/testsuite/u.r b/testsuite/u.r new file mode 100644 index 0000000..ad558d8 --- /dev/null +++ b/testsuite/u.r @@ -0,0 +1,9 @@ +line 1 +hello +hello world!! +line 2 +line 3 +line 4 +line5 +hello +hello world!! diff --git a/testsuite/u.t b/testsuite/u.t new file mode 100644 index 0000000..1b9eb15 --- /dev/null +++ b/testsuite/u.t @@ -0,0 +1,31 @@ +1;r ascii.o +u +a +hello +world +. +g/./s//x/\ +a\ +hello\ +world +u +u +u +a +hello world! +. +u +1,$d +u +2,3d +u +c +hello world!! +. +u +u +-1;.,+1j +u +u +u +.,+1t$ diff --git a/testsuite/v.d b/testsuite/v.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/v.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/v.r b/testsuite/v.r new file mode 100644 index 0000000..714db63 --- /dev/null +++ b/testsuite/v.r @@ -0,0 +1,11 @@ +line5 +order +hello world +line 1 +order +line 2 +order +line 3 +order +line 4 +order diff --git a/testsuite/v.t b/testsuite/v.t new file mode 100644 index 0000000..608a77f --- /dev/null +++ b/testsuite/v.t @@ -0,0 +1,6 @@ +v/[ ]/m0 +v/[ ]/s/$/\ +hello world +v/hello /s/lo/p!/\ +a\ +order diff --git a/testsuite/w.d b/testsuite/w.d new file mode 100644 index 0000000..92f337e --- /dev/null +++ b/testsuite/w.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/w.r b/testsuite/w.r new file mode 100644 index 0000000..ac152ba --- /dev/null +++ b/testsuite/w.r @@ -0,0 +1,10 @@ +line 1 +line 2 +line 3 +line 4 +line5 +line 1 +line 2 +line 3 +line 4 +line5 diff --git a/testsuite/w.t b/testsuite/w.t new file mode 100644 index 0000000..c2e18bd --- /dev/null +++ b/testsuite/w.t @@ -0,0 +1,2 @@ +w !cat >\!.z +r \!.z diff --git a/testsuite/w1.err b/testsuite/w1.err new file mode 100644 index 0000000..e2c8a60 --- /dev/null +++ b/testsuite/w1.err @@ -0,0 +1 @@ +w /to/some/far-away/place diff --git a/testsuite/w1.pr b/testsuite/w1.pr new file mode 100644 index 0000000..e2c8a60 --- /dev/null +++ b/testsuite/w1.pr @@ -0,0 +1 @@ +w /to/some/far-away/place diff --git a/testsuite/w2.err b/testsuite/w2.err new file mode 100644 index 0000000..9daf89c --- /dev/null +++ b/testsuite/w2.err @@ -0,0 +1 @@ +ww.o diff --git a/testsuite/w2.pr b/testsuite/w2.pr new file mode 100644 index 0000000..9daf89c --- /dev/null +++ b/testsuite/w2.pr @@ -0,0 +1 @@ +ww.o diff --git a/testsuite/w3.err b/testsuite/w3.err new file mode 100644 index 0000000..39bbf4c --- /dev/null +++ b/testsuite/w3.err @@ -0,0 +1 @@ +wqp w.o diff --git a/testsuite/w3.pr b/testsuite/w3.pr new file mode 100644 index 0000000..39bbf4c --- /dev/null +++ b/testsuite/w3.pr @@ -0,0 +1 @@ +wqp w.o diff --git a/testsuite/x.d b/testsuite/x.d new file mode 100644 index 0000000..94c99a3 --- /dev/null +++ b/testsuite/x.d @@ -0,0 +1,5 @@ +line 1 +line 2 +line 3 +line 4 +line 5 diff --git a/testsuite/x.err b/testsuite/x.err new file mode 100644 index 0000000..898398e --- /dev/null +++ b/testsuite/x.err @@ -0,0 +1,10 @@ +2,3y +$x +0x +,y +$x +2 +y +x +E addr1.ro +x diff --git a/testsuite/x.pr b/testsuite/x.pr new file mode 100644 index 0000000..29d6383 --- /dev/null +++ b/testsuite/x.pr @@ -0,0 +1 @@ +100 diff --git a/testsuite/x.r b/testsuite/x.r new file mode 100644 index 0000000..7b8b7c0 --- /dev/null +++ b/testsuite/x.r @@ -0,0 +1,19 @@ +line 2 +line 3 +line 3 +line 1 +line 2 +line 3 +line 4 +line 5 +line 2 +line 3 +line 2 +line 3 +line 1 +line 2 +line 3 +line 4 +line 5 +line 2 +line 3 diff --git a/testsuite/x.t b/testsuite/x.t new file mode 100644 index 0000000..0e868b8 --- /dev/null +++ b/testsuite/x.t @@ -0,0 +1,8 @@ +2,3y +$x +0x +,y +$x +2 +y +x diff --git a/testsuite/z.err b/testsuite/z.err new file mode 100644 index 0000000..6a51a2d --- /dev/null +++ b/testsuite/z.err @@ -0,0 +1,2 @@ +z +z diff --git a/testsuite/z.pr b/testsuite/z.pr new file mode 100644 index 0000000..6a51a2d --- /dev/null +++ b/testsuite/z.pr @@ -0,0 +1,2 @@ +z +z -- 2.7.4