From ca82a6e7e37693a84de542d06f3700037cc56525 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 11 Sep 2012 16:39:44 -0700 Subject: [PATCH] staging: comedi: adl_pci9118: remove PCI9118_EXTDEBUG and DPRINTK These macros enable a bunch of function trace messages. These should not be in the final driver. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/adl_pci9118.c | 117 --------------------------- 1 file changed, 117 deletions(-) diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c index b9d33d8..cfef739 100644 --- a/drivers/staging/comedi/drivers/adl_pci9118.c +++ b/drivers/staging/comedi/drivers/adl_pci9118.c @@ -81,18 +81,6 @@ Configuration options: * correct channel number on every 12 bit sample */ -#undef PCI9118_EXTDEBUG /* - * if defined then driver prints - * a lot of messages - */ - -#undef DPRINTK -#ifdef PCI9118_EXTDEBUG -#define DPRINTK(fmt, args...) printk(fmt, ## args) -#else -#define DPRINTK(fmt, args...) -#endif - #define IORANGE_9118 64 /* I hope */ #define PCI9118_CHANLEN 255 /* * len of chanlist, some source say 256, @@ -721,7 +709,6 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev, samplesinbuf = devpriv->dmabuf_use_size[devpriv->dma_actbuf] >> 1; /* number of received real samples */ -/* DPRINTK("dma_actbuf=%d\n",devpriv->dma_actbuf); */ if (devpriv->dma_doublebuf) { /* * switch DMA buffers if is used @@ -743,17 +730,12 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev, * how many samples is to * end of buffer */ -/* - * DPRINTK("samps=%d m=%d %d %d\n", - * samplesinbuf,m,s->async->buf_int_count,s->async->buf_int_ptr); - */ sampls = m; move_block_from_dma(dev, s, devpriv->dmabuf_virt[devpriv->dma_actbuf], samplesinbuf); m = m - sampls; /* m= how many samples was transferred */ } -/* DPRINTK("YYY\n"); */ if (!devpriv->ai_neverending) if (devpriv->ai_act_scan >= devpriv->ai_scans) { @@ -793,14 +775,6 @@ static irqreturn_t interrupt_pci9118(int irq, void *d) int_amcc = inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR); /* get INT register from AMCC chip */ -/* - * DPRINTK("INT daq=0x%01x amcc=0x%08x MWAR=0x%08x - * MWTC=0x%08x ADSTAT=0x%02x ai_do=%d\n", - * int_daq, int_amcc, inl(devpriv->iobase_a+AMCC_OP_REG_MWAR), - * inl(devpriv->iobase_a+AMCC_OP_REG_MWTC), - * inw(dev->iobase+PCI9118_ADSTAT)&0x1ff,devpriv->ai_do); - */ - if ((!int_daq) && (!(int_amcc & ANY_S593X_INT))) return IRQ_NONE; /* interrupt from other source */ @@ -1152,11 +1126,8 @@ static int Compute_and_setup_dma(struct comedi_device *dev) struct pci9118_private *devpriv = dev->private; unsigned int dmalen0, dmalen1, i; - DPRINTK("adl_pci9118 EDBG: BGN: Compute_and_setup_dma()\n"); dmalen0 = devpriv->dmabuf_size[0]; dmalen1 = devpriv->dmabuf_size[1]; - DPRINTK("1 dmalen0=%d dmalen1=%d ai_data_len=%d\n", dmalen0, dmalen1, - devpriv->ai_data_len); /* isn't output buff smaller that our DMA buff? */ if (dmalen0 > (devpriv->ai_data_len)) { dmalen0 = devpriv->ai_data_len & ~3L; /* @@ -1168,7 +1139,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev) * align to 32bit down */ } - DPRINTK("2 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1); /* we want wake up every scan? */ if (devpriv->ai_flags & TRIG_WAKE_EOS) { @@ -1183,11 +1153,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev) } else { /* short first DMA buffer to one scan */ dmalen0 = devpriv->ai_n_realscanlen << 1; - DPRINTK - ("21 dmalen0=%d ai_n_realscanlen=%d " - "useeoshandle=%d\n", - dmalen0, devpriv->ai_n_realscanlen, - devpriv->useeoshandle); if (devpriv->useeoshandle) dmalen0 += 2; if (dmalen0 < 4) { @@ -1211,11 +1176,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev) } else { /* short second DMA buffer to one scan */ dmalen1 = devpriv->ai_n_realscanlen << 1; - DPRINTK - ("22 dmalen1=%d ai_n_realscanlen=%d " - "useeoshandle=%d\n", - dmalen1, devpriv->ai_n_realscanlen, - devpriv->useeoshandle); if (devpriv->useeoshandle) dmalen1 -= 2; if (dmalen1 < 4) { @@ -1228,7 +1188,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev) } } - DPRINTK("3 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1); /* transfer without TRIG_WAKE_EOS */ if (!(devpriv->ai_flags & TRIG_WAKE_EOS)) { /* if it's possible then align DMA buffers to length of scan */ @@ -1255,15 +1214,9 @@ static int Compute_and_setup_dma(struct comedi_device *dev) if (dmalen0 > ((devpriv->ai_n_realscanlen << 1) * devpriv->ai_scans)) { - DPRINTK - ("3.0 ai_n_realscanlen=%d ai_scans=%d\n", - devpriv->ai_n_realscanlen, - devpriv->ai_scans); dmalen0 = (devpriv->ai_n_realscanlen << 1) * devpriv->ai_scans; - DPRINTK("3.1 dmalen0=%d dmalen1=%d\n", dmalen0, - dmalen1); dmalen0 &= ~3L; } else { /* * fits whole measure into @@ -1275,21 +1228,16 @@ static int Compute_and_setup_dma(struct comedi_device *dev) dmalen1 = (devpriv->ai_n_realscanlen << 1) * devpriv->ai_scans - dmalen0; - DPRINTK("3.2 dmalen0=%d dmalen1=%d\n", dmalen0, - dmalen1); dmalen1 &= ~3L; } } } - DPRINTK("4 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1); - /* these DMA buffer size will be used */ devpriv->dma_actbuf = 0; devpriv->dmabuf_use_size[0] = dmalen0; devpriv->dmabuf_use_size[1] = dmalen1; - DPRINTK("5 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1); #if 0 if (devpriv->ai_n_scanlen < this_board->half_fifo_size) { devpriv->dmabuf_panic_size[0] = @@ -1322,7 +1270,6 @@ static int Compute_and_setup_dma(struct comedi_device *dev) devpriv->iobase_a + AMCC_OP_REG_INTCSR); /* allow bus mastering */ - DPRINTK("adl_pci9118 EDBG: END: Compute_and_setup_dma()\n"); return 0; } @@ -1334,8 +1281,6 @@ static int pci9118_ai_docmd_sampl(struct comedi_device *dev, { struct pci9118_private *devpriv = dev->private; - DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_sampl(%d,) [%d]\n", - dev->minor, devpriv->ai_do); switch (devpriv->ai_do) { case 1: devpriv->AdControlReg |= AdControl_TmrTr; @@ -1382,7 +1327,6 @@ static int pci9118_ai_docmd_sampl(struct comedi_device *dev, outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL); } - DPRINTK("adl_pci9118 EDBG: END: pci9118_ai_docmd_sampl()\n"); return 0; } @@ -1394,8 +1338,6 @@ static int pci9118_ai_docmd_dma(struct comedi_device *dev, { struct pci9118_private *devpriv = dev->private; - DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_dma(%d,) [%d,%d]\n", - dev->minor, devpriv->ai_do, devpriv->usedma); Compute_and_setup_dma(dev); switch (devpriv->ai_do) { @@ -1458,7 +1400,6 @@ static int pci9118_ai_docmd_dma(struct comedi_device *dev, outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL); } - DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_dma()\n"); return 0; } @@ -1473,7 +1414,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) unsigned int addchans = 0; int ret = 0; - DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_cmd(%d,)\n", dev->minor); devpriv->ai12_startstop = 0; devpriv->ai_flags = cmd->flags; devpriv->ai_n_chan = cmd->chanlist_len; @@ -1522,10 +1462,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->usessh = 0; /* no */ - DPRINTK("1 neverending=%d scans=%u usessh=%d ai_startstop=0x%2x\n", - devpriv->ai_neverending, devpriv->ai_scans, devpriv->usessh, - devpriv->ai12_startstop); - /* * use additional sample at end of every scan * to satisty DMA 32 bit transfer? @@ -1606,12 +1542,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->ai_add_back) * (devpriv->ai_n_scanlen / devpriv->ai_n_chan); - DPRINTK("2 usedma=%d realscan=%d af=%u n_chan=%d ab=%d n_scanlen=%d\n", - devpriv->usedma, - devpriv->ai_n_realscanlen, devpriv->ai_add_front, - devpriv->ai_n_chan, devpriv->ai_add_back, - devpriv->ai_n_scanlen); - /* check and setup channel list */ if (!check_channel_list(dev, s, devpriv->ai_n_chan, devpriv->ai_chanlist, devpriv->ai_add_front, @@ -1708,7 +1638,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) else ret = pci9118_ai_docmd_sampl(dev, s); - DPRINTK("adl_pci9118 EDBG: END: pci9118_ai_cmd()\n"); return ret; } @@ -1780,11 +1709,6 @@ static int setup_channel_list(struct comedi_device *dev, unsigned int i, differencial = 0, bipolar = 0; unsigned int scanquad, gain, ssh = 0x00; - DPRINTK - ("adl_pci9118 EDBG: BGN: setup_channel_list" - "(%d,.,%d,.,%d,%d,%d,%d)\n", - dev->minor, n_chan, rot, frontadd, backadd, usedma); - if (usedma == 1) { rot = 8; usedma = 0; @@ -1829,7 +1753,6 @@ static int setup_channel_list(struct comedi_device *dev, if (frontadd) { /* insert channels for S&H */ ssh = devpriv->softsshsample; - DPRINTK("FA: %04x: ", ssh); for (i = 0; i < frontadd; i++) { /* store range list to card */ scanquad = CR_CHAN(chanlist[0]); @@ -1838,13 +1761,10 @@ static int setup_channel_list(struct comedi_device *dev, /* get gain number */ scanquad |= ((gain & 0x03) << 8); outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); - DPRINTK("%02x ", scanquad | ssh); ssh = devpriv->softsshhold; } - DPRINTK("\n "); } - DPRINTK("SL: ", ssh); for (i = 0; i < n_chan; i++) { /* store range list to card */ scanquad = CR_CHAN(chanlist[i]); /* get channel number */ #ifdef PCI9118_PARANOIDCHECK @@ -1853,21 +1773,16 @@ static int setup_channel_list(struct comedi_device *dev, gain = CR_RANGE(chanlist[i]); /* get gain number */ scanquad |= ((gain & 0x03) << 8); outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); - DPRINTK("%02x ", scanquad | ssh); } - DPRINTK("\n "); if (backadd) { /* insert channels for fit onto 32bit DMA */ - DPRINTK("BA: %04x: ", ssh); for (i = 0; i < backadd; i++) { /* store range list to card */ scanquad = CR_CHAN(chanlist[0]); /* get channel number */ gain = CR_RANGE(chanlist[0]); /* get gain number */ scanquad |= ((gain & 0x03) << 8); outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); - DPRINTK("%02x ", scanquad | ssh); } - DPRINTK("\n "); } #ifdef PCI9118_PARANOIDCHECK devpriv->chanlist[n_chan ^ usedma] = devpriv->chanlist[0 ^ usedma]; @@ -1884,18 +1799,10 @@ static int setup_channel_list(struct comedi_device *dev, } else { useeos = 1; } -#ifdef PCI9118_EXTDEBUG - DPRINTK("CHL: "); - for (i = 0; i <= (useeos * n_chan); i++) - DPRINTK("%04x ", devpriv->chanlist[i]); - - DPRINTK("\n "); -#endif #endif outl(0, dev->iobase + PCI9118_SCANMOD); /* close scan queue */ /* udelay(100); important delay, or first sample will be crippled */ - DPRINTK("adl_pci9118 EDBG: END: setup_channel_list()\n"); return 1; /* we can serve this with scan logic */ } @@ -1913,10 +1820,6 @@ static void pci9118_calc_divisors(char mode, struct comedi_device *dev, const struct boardtype *this_board = comedi_board(dev); struct pci9118_private *devpriv = dev->private; - DPRINTK - ("adl_pci9118 EDBG: BGN: pci9118_calc_divisors" - "(%d,%d,.,%u,%u,%u,%d,.,.,,%u,%u)\n", - mode, dev->minor, *tim1, *tim2, flags, chans, usessh, chnsshfront); switch (mode) { case 1: case 4: @@ -1924,32 +1827,18 @@ static void pci9118_calc_divisors(char mode, struct comedi_device *dev, *tim2 = this_board->ai_ns_min; i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, div1, div2, tim2, flags & TRIG_ROUND_NEAREST); - DPRINTK("OSC base=%u div1=%u div2=%u timer1=%u\n", - devpriv->i8254_osc_base, *div1, *div2, *tim1); break; case 2: if (*tim2 < this_board->ai_ns_min) *tim2 = this_board->ai_ns_min; - DPRINTK("1 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2, - *tim1, *tim2); *div1 = *tim2 / devpriv->i8254_osc_base; /* convert timer (burst) */ - DPRINTK("2 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2, - *tim1, *tim2); if (*div1 < this_board->ai_pacer_min) *div1 = this_board->ai_pacer_min; - DPRINTK("3 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2, - *tim1, *tim2); *div2 = *tim1 / devpriv->i8254_osc_base; /* scan timer */ - DPRINTK("4 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2, - *tim1, *tim2); *div2 = *div2 / *div1; /* major timer is c1*c2 */ - DPRINTK("5 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2, - *tim1, *tim2); if (*div2 < chans) *div2 = chans; - DPRINTK("6 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2, - *tim1, *tim2); *tim2 = *div1 * devpriv->i8254_osc_base; /* real convert timer */ @@ -1958,15 +1847,9 @@ static void pci9118_calc_divisors(char mode, struct comedi_device *dev, if (*div2 < (chans + 2)) *div2 = chans + 2; - DPRINTK("7 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2, - *tim1, *tim2); *tim1 = *div1 * *div2 * devpriv->i8254_osc_base; - DPRINTK("OSC base=%u div1=%u div2=%u timer1=%u timer2=%u\n", - devpriv->i8254_osc_base, *div1, *div2, *tim1, *tim2); break; } - DPRINTK("adl_pci9118 EDBG: END: pci9118_calc_divisors(%u,%u)\n", - *div1, *div2); } /* -- 2.7.4