From ca3ccad827175fa47f4b20ea4c7072e1ddc33128 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 15 Jan 2012 11:03:08 -0800 Subject: [PATCH] hwmon: (w83l786ng) Fix checkpatch issues Fixed: ERROR: code indent should use tabs where possible ERROR: do not use assignment in if condition ERROR: space required after that ',' (ctx:VxV) WARNING: braces {} are not necessary for single statement blocks WARNING: please, no space before tabs WARNING: please, no spaces at the start of a line WARNING: simple_strtol is obsolete, use kstrtol instead WARNING: simple_strtoul is obsolete, use kstrtoul instead WARNING: space prohibited between function name and open parenthesis '(' Not fixed (false positive): ERROR: Macros with complex values should be enclosed in parenthesis Signed-off-by: Guenter Roeck --- drivers/hwmon/w83l786ng.c | 103 +++++++++++++++++++++++++++++++--------------- 1 file changed, 70 insertions(+), 33 deletions(-) diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index deac4b6..a6310b8 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -52,7 +52,7 @@ MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); #define W83L786NG_REG_CONFIG 0x40 #define W83L786NG_REG_ALARM1 0x41 -#define W83L786NG_REG_ALARM2 0x42 +#define W83L786NG_REG_ALARM2 0x42 #define W83L786NG_REG_GPIO_EN 0x47 #define W83L786NG_REG_MAN_ID2 0x4C #define W83L786NG_REG_MAN_ID1 0x4D @@ -89,19 +89,21 @@ FAN_TO_REG(long rpm, int div) return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); } -#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ +#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \ ((val) == 255 ? 0 : \ 1350000 / ((val) * (div)))) /* for temp */ -#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ - : (val)) / 1000, 0, 0xff)) -#define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) +#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? \ + (val) + 0x100 * 1000 \ + : (val)) / 1000, 0, 0xff)) +#define TEMP_FROM_REG(val) (((val) & 0x80 ? \ + (val) - 0x100 : (val)) * 1000) /* The analog voltage inputs have 8mV LSB. Since the sysfs output is in mV as would be measured on the chip input pin, need to just multiply/divide by 8 to translate from/to register values. */ -#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 4) / 8), 0, 255)) +#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 4) / 8), 0, 255)) #define IN_FROM_REG(val) ((val) * 8) #define DIV_FROM_REG(val) (1 << (val)) @@ -186,11 +188,11 @@ w83l786ng_write_value(struct i2c_client *client, u8 reg, u8 value) #define show_in_reg(reg) \ static ssize_t \ show_##reg(struct device *dev, struct device_attribute *attr, \ - char *buf) \ + char *buf) \ { \ int nr = to_sensor_dev_attr(attr)->index; \ struct w83l786ng_data *data = w83l786ng_update_device(dev); \ - return sprintf(buf,"%d\n", IN_FROM_REG(data->reg[nr])); \ + return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \ } show_in_reg(in) @@ -199,13 +201,16 @@ show_in_reg(in_max) #define store_in_reg(REG, reg) \ static ssize_t \ -store_in_##reg (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ +store_in_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ { \ int nr = to_sensor_dev_attr(attr)->index; \ struct i2c_client *client = to_i2c_client(dev); \ struct w83l786ng_data *data = i2c_get_clientdata(client); \ - unsigned long val = simple_strtoul(buf, NULL, 10); \ + unsigned long val; \ + int err = kstrtoul(buf, 10, &val); \ + if (err) \ + return err; \ mutex_lock(&data->update_lock); \ data->in_##reg[nr] = IN_TO_REG(val); \ w83l786ng_write_value(client, W83L786NG_REG_IN_##REG(nr), \ @@ -241,8 +246,8 @@ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ { \ int nr = to_sensor_dev_attr(attr)->index; \ struct w83l786ng_data *data = w83l786ng_update_device(dev); \ - return sprintf(buf,"%d\n", \ - FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]))); \ + return sprintf(buf, "%d\n", \ + FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]))); \ } show_fan_reg(fan); @@ -255,9 +260,13 @@ store_fan_min(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); - u32 val; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; - val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); w83l786ng_write_value(client, W83L786NG_REG_FAN_MIN(nr), @@ -294,11 +303,18 @@ store_fan_div(struct device *dev, struct device_attribute *attr, u8 keep_mask = 0; u8 new_shift = 0; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + /* Save fan_min */ mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); - data->fan_div[nr] = DIV_TO_REG(simple_strtoul(buf, NULL, 10)); + data->fan_div[nr] = DIV_TO_REG(val); switch (nr) { case 0: @@ -371,16 +387,20 @@ store_temp(struct device *dev, struct device_attribute *attr, int index = sensor_attr->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); - s32 val; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; - val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp[nr][index] = TEMP_TO_REG(val); w83l786ng_write_value(client, W83L786NG_REG_TEMP[nr][index], data->temp[nr][index]); mutex_unlock(&data->update_lock); - return count; + return count; } static struct sensor_device_attribute_2 sda_temp_input[] = { @@ -403,8 +423,8 @@ static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { }; #define show_pwm_reg(reg) \ -static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ - char *buf) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct w83l786ng_data *data = w83l786ng_update_device(dev); \ int nr = to_sensor_dev_attr(attr)->index; \ @@ -422,8 +442,13 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); - u32 val = simple_strtoul(buf, NULL, 10); u8 reg; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; if (val > 1) return -EINVAL; @@ -445,7 +470,13 @@ store_pwm(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); - u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); data->pwm[nr] = val; @@ -461,11 +492,15 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); - u32 val = simple_strtoul(buf, NULL, 10); - u8 reg; + unsigned long val; + int err; - if (!val || (val > 2)) /* only modes 1 and 2 are supported */ + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + if (!val || val > 2) /* only modes 1 and 2 are supported */ return -EINVAL; mutex_lock(&data->update_lock); @@ -513,10 +548,13 @@ store_tolerance(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); - u32 val; u8 tol_tmp, tol_mask; + unsigned long val; + int err; - val = simple_strtoul(buf, NULL, 10); + err = kstrtoul(buf, 10, &val); + if (err) + return err; mutex_lock(&data->update_lock); tol_mask = w83l786ng_read_value(client, @@ -524,9 +562,8 @@ store_tolerance(struct device *dev, struct device_attribute *attr, tol_tmp = SENSORS_LIMIT(val, 0, 15); tol_tmp &= 0x0f; data->tolerance[nr] = tol_tmp; - if (nr == 1) { + if (nr == 1) tol_tmp <<= 4; - } w83l786ng_write_value(client, W83L786NG_REG_TOLERANCE, tol_mask | tol_tmp); @@ -591,9 +628,8 @@ w83l786ng_detect(struct i2c_client *client, struct i2c_board_info *info) u16 man_id; u8 chip_id; - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - } /* Detection */ if ((w83l786ng_read_value(client, W83L786NG_REG_CONFIG) & 0x80)) { @@ -652,7 +688,8 @@ w83l786ng_probe(struct i2c_client *client, const struct i2c_device_id *id) data->fan_div[1] = (reg_tmp >> 4) & 0x07; /* Register sysfs hooks */ - if ((err = sysfs_create_group(&client->dev.kobj, &w83l786ng_group))) + err = sysfs_create_group(&client->dev.kobj, &w83l786ng_group); + if (err) goto exit_remove; data->hwmon_dev = hwmon_device_register(dev); -- 2.7.4