From c9b1d0981fcce3d9976d7b7a56e4e0503bc610dd Mon Sep 17 00:00:00 2001 From: Andrew Shewmaker Date: Mon, 29 Apr 2013 15:08:10 -0700 Subject: [PATCH] mm: limit growth of 3% hardcoded other user reserve Add user_reserve_kbytes knob. Limit the growth of the memory reserved for other user processes to min(3% current process size, user_reserve_pages). Only about 8MB is necessary to enable recovery in the default mode, and only a few hundred MB are required even when overcommit is disabled. user_reserve_pages defaults to min(3% free pages, 128MB) I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ... then adding the RSS of each. This only affects OVERCOMMIT_NEVER mode. Background 1. user reserve __vm_enough_memory reserves a hardcoded 3% of the current process size for other applications when overcommit is disabled. This was done so that a user could recover if they launched a memory hogging process. Without the reserve, a user would easily run into a message such as: bash: fork: Cannot allocate memory 2. admin reserve Additionally, a hardcoded 3% of free memory is reserved for root in both overcommit 'guess' and 'never' modes. This was intended to prevent a scenario where root-cant-log-in and perform recovery operations. Note that this reserve shrinks, and doesn't guarantee a useful reserve. Motivation The two hardcoded memory reserves should be updated to account for current memory sizes. Also, the admin reserve would be more useful if it didn't shrink too much. When the current code was originally written, 1GB was considered "enterprise". Now the 3% reserve can grow to multiple GB on large memory systems, and it only needs to be a few hundred MB at most to enable a user or admin to recover a system with an unwanted memory hogging process. I've found that reducing these reserves is especially beneficial for a specific type of application load: * single application system * one or few processes (e.g. one per core) * allocating all available memory * not initializing every page immediately * long running I've run scientific clusters with this sort of load. A long running job sometimes failed many hours (weeks of CPU time) into a calculation. They weren't initializing all of their memory immediately, and they weren't using calloc, so I put systems into overcommit 'never' mode. These clusters run diskless and have no swap. However, with the current reserves, a user wishing to allocate as much memory as possible to one process may be prevented from using, for example, almost 2GB out of 32GB. The effect is less, but still significant when a user starts a job with one process per core. I have repeatedly seen a set of processes requesting the same amount of memory fail because one of them could not allocate the amount of memory a user would expect to be able to allocate. For example, Message Passing Interfce (MPI) processes, one per core. And it is similar for other parallel programming frameworks. Changing this reserve code will make the overcommit never mode more useful by allowing applications to allocate nearly all of the available memory. Also, the new admin_reserve_kbytes will be safer than the current behavior since the hardcoded 3% of available memory reserve can shrink to something useless in the case where applications have grabbed all available memory. Risks * "bash: fork: Cannot allocate memory" The downside of the first patch-- which creates a tunable user reserve that is only used in overcommit 'never' mode--is that an admin can set it so low that a user may not be able to kill their process, even if they already have a shell prompt. Of course, a user can get in the same predicament with the current 3% reserve--they just have to launch processes until 3% becomes negligible. * root-cant-log-in problem The second patch, adding the tunable rootuser_reserve_pages, allows the admin to shoot themselves in the foot by setting it too small. They can easily get the system into a state where root-can't-log-in. However, the new admin_reserve_kbytes will be safer than the current behavior since the hardcoded 3% of available memory reserve can shrink to something useless in the case where applications have grabbed all available memory. Alternatives * Memory cgroups provide a more flexible way to limit application memory. Not everyone wants to set up cgroups or deal with their overhead. * We could create a fourth overcommit mode which provides smaller reserves. The size of useful reserves may be drastically different depending on the whether the system is embedded or enterprise. * Force users to initialize all of their memory or use calloc. Some users don't want/expect the system to overcommit when they malloc. Overcommit 'never' mode is for this scenario, and it should work well. The new user and admin reserve tunables are simple to use, with low overhead compared to cgroups. The patches preserve current behavior where 3% of memory is less than 128MB, except that the admin reserve doesn't shrink to an unusable size under pressure. The code allows admins to tune for embedded and enterprise usage. FAQ * How is the root-cant-login problem addressed? What happens if admin_reserve_pages is set to 0? Root is free to shoot themselves in the foot by setting admin_reserve_kbytes too low. On x86_64, the minimum useful reserve is: 8MB for overcommit 'guess' 128MB for overcommit 'never' admin_reserve_pages defaults to min(3% free memory, 8MB) So, anyone switching to 'never' mode needs to adjust admin_reserve_pages. * How do you calculate a minimum useful reserve? A user or the admin needs enough memory to login and perform recovery operations, which includes, at a minimum: sshd or login + bash (or some other shell) + top (or ps, kill, etc.) For overcommit 'guess', we can sum resident set sizes (RSS) because we only need enough memory to handle what the recovery programs will typically use. On x86_64 this is about 8MB. For overcommit 'never', we can take the max of their virtual sizes (VSZ) and add the sum of their RSS. We use VSZ instead of RSS because mode forces us to ensure we can fulfill all of the requested memory allocations-- even if the programs only use a fraction of what they ask for. On x86_64 this is about 128MB. When swap is enabled, reserves are useful even when they are as small as 10MB, regardless of overcommit mode. When both swap and overcommit are disabled, then the admin should tune the reserves higher to be absolutley safe. Over 230MB each was safest in my testing. * What happens if user_reserve_pages is set to 0? Note, this only affects overcomitt 'never' mode. Then a user will be able to allocate all available memory minus admin_reserve_kbytes. However, they will easily see a message such as: "bash: fork: Cannot allocate memory" And they won't be able to recover/kill their application. The admin should be able to recover the system if admin_reserve_kbytes is set appropriately. * What's the difference between overcommit 'guess' and 'never'? "Guess" allows an allocation if there are enough free + reclaimable pages. It has a hardcoded 3% of free pages reserved for root. "Never" allows an allocation if there is enough swap + a configurable percentage (default is 50) of physical RAM. It has a hardcoded 3% of free pages reserved for root, like "Guess" mode. It also has a hardcoded 3% of the current process size reserved for additional applications. * Why is overcommit 'guess' not suitable even when an app eventually writes to every page? It takes free pages, file pages, available swap pages, reclaimable slab pages into consideration. In other words, these are all pages available, then why isn't overcommit suitable? Because it only looks at the present state of the system. It does not take into account the memory that other applications have malloced, but haven't initialized yet. It overcommits the system. Test Summary There was little change in behavior in the default overcommit 'guess' mode with swap enabled before and after the patch. This was expected. Systems run most predictably (i.e. no oom kills) in overcommit 'never' mode with swap enabled. This also allowed the most memory to be allocated to a user application. Overcommit 'guess' mode without swap is a bad idea. It is easy to crash the system. None of the other tested combinations crashed. This matches my experience on the Roadrunner supercomputer. Without the tunable user reserve, a system in overcommit 'never' mode and without swap does not allow the admin to recover, although the admin can. With the new tunable reserves, a system in overcommit 'never' mode and without swap can be configured to: 1. maximize user-allocatable memory, running close to the edge of recoverability 2. maximize recoverability, sacrificing allocatable memory to ensure that a user cannot take down a system Test Description Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap System is booted into multiuser console mode, with unnecessary services turned off. Caches were dropped before each test. Hogs are user memtester processes that attempt to allocate all free memory as reported by /proc/meminfo In overcommit 'never' mode, memory_ratio=100 Test Results 3.9.0-rc1-mm1 Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery ---------- ---- ---- ------------- ---- ------------- -------------- guess yes 1 5432/5432 no yes yes guess yes 4 5444/5444 1 yes yes guess no 1 5302/5449 no yes yes guess no 4 - crash no no never yes 1 5460/5460 1 yes yes never yes 4 5460/5460 1 yes yes never no 1 5218/5432 no no yes never no 4 5203/5448 no no yes 3.9.0-rc1-mm1-tunablereserves User and Admin Recovery show their respective reserves, if applicable. Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery ---------- ---- ---- ------------- ---- ------------- -------------- guess yes 1 5419/5419 no - yes 8MB yes guess yes 4 5436/5436 1 - yes 8MB yes guess no 1 5440/5440 * - yes 8MB yes guess no 4 - crash - no 8MB no * process would successfully mlock, then the oom killer would pick it never yes 1 5446/5446 no 10MB yes 20MB yes never yes 4 5456/5456 no 10MB yes 20MB yes never no 1 5387/5429 no 128MB no 8MB barely never no 1 5323/5428 no 226MB barely 8MB barely never no 1 5323/5428 no 226MB barely 8MB barely never no 1 5359/5448 no 10MB no 10MB barely never no 1 5323/5428 no 0MB no 10MB barely never no 1 5332/5428 no 0MB no 50MB yes never no 1 5293/5429 no 0MB no 90MB yes never no 1 5001/5427 no 230MB yes 338MB yes never no 4* 4998/5424 no 230MB yes 338MB yes * more memtesters were launched, able to allocate approximately another 100MB Future Work - Test larger memory systems. - Test an embedded image. - Test other architectures. - Time malloc microbenchmarks. - Would it be useful to be able to set overcommit policy for each memory cgroup? - Some lines are slightly above 80 chars. Perhaps define a macro to convert between pages and kb? Other places in the kernel do this. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make init_user_reserve() static] Signed-off-by: Andrew Shewmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/vm.txt | 20 +++++++++++++++++++ Documentation/vm/overcommit-accounting | 8 +++++++- include/linux/mm.h | 2 ++ kernel/sysctl.c | 7 +++++++ mm/mmap.c | 35 +++++++++++++++++++++++++++++----- mm/nommu.c | 35 +++++++++++++++++++++++++++++----- 6 files changed, 96 insertions(+), 11 deletions(-) diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 078701f..f6989573 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -53,6 +53,7 @@ Currently, these files are in /proc/sys/vm: - percpu_pagelist_fraction - stat_interval - swappiness +- user_reserve_kbytes - vfs_cache_pressure - zone_reclaim_mode @@ -542,6 +543,7 @@ memory until it actually runs out. When this flag is 2, the kernel uses a "never overcommit" policy that attempts to prevent any overcommit of memory. +Note that user_reserve_kbytes affects this policy. This feature can be very useful because there are a lot of programs that malloc() huge amounts of memory "just-in-case" @@ -645,6 +647,24 @@ The default value is 60. ============================================================== +- user_reserve_kbytes + +When overcommit_memory is set to 2, "never overommit" mode, reserve +min(3% of current process size, user_reserve_kbytes) of free memory. +This is intended to prevent a user from starting a single memory hogging +process, such that they cannot recover (kill the hog). + +user_reserve_kbytes defaults to min(3% of the current process size, 128MB). + +If this is reduced to zero, then the user will be allowed to allocate +all free memory with a single process, minus admin_reserve_kbytes. +Any subsequent attempts to execute a command will result in +"fork: Cannot allocate memory". + +Changing this takes effect whenever an application requests memory. + +============================================================== + vfs_cache_pressure ------------------ diff --git a/Documentation/vm/overcommit-accounting b/Documentation/vm/overcommit-accounting index 706d7ed..8eaa2fc 100644 --- a/Documentation/vm/overcommit-accounting +++ b/Documentation/vm/overcommit-accounting @@ -8,7 +8,9 @@ The Linux kernel supports the following overcommit handling modes default. 1 - Always overcommit. Appropriate for some scientific - applications. + applications. Classic example is code using sparse arrays + and just relying on the virtual memory consisting almost + entirely of zero pages. 2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap + a @@ -18,6 +20,10 @@ The Linux kernel supports the following overcommit handling modes pages but will receive errors on memory allocation as appropriate. + Useful for applications that want to guarantee their + memory allocations will be available in the future + without having to initialize every page. + The overcommit policy is set via the sysctl `vm.overcommit_memory'. The overcommit percentage is set via `vm.overcommit_ratio'. diff --git a/include/linux/mm.h b/include/linux/mm.h index 7aa11a6..43cfaab 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -44,6 +44,8 @@ extern int sysctl_legacy_va_layout; #include #include +extern unsigned long sysctl_user_reserve_kbytes; + #define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n)) /* to align the pointer to the (next) page boundary */ diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 3dadde5..6daabb7 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1429,6 +1429,13 @@ static struct ctl_table vm_table[] = { .extra2 = &one, }, #endif + { + .procname = "user_reserve_kbytes", + .data = &sysctl_user_reserve_kbytes, + .maxlen = sizeof(sysctl_user_reserve_kbytes), + .mode = 0644, + .proc_handler = proc_doulongvec_minmax, + }, { } }; diff --git a/mm/mmap.c b/mm/mmap.c index 081e6da..80a965f 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -84,6 +84,7 @@ EXPORT_SYMBOL(vm_get_page_prot); int sysctl_overcommit_memory __read_mostly = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio __read_mostly = 50; /* default is 50% */ int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT; +unsigned long sysctl_user_reserve_kbytes __read_mostly = 1UL << 17; /* 128MB */ /* * Make sure vm_committed_as in one cacheline and not cacheline shared with * other variables. It can be updated by several CPUs frequently. @@ -122,7 +123,7 @@ EXPORT_SYMBOL_GPL(vm_memory_committed); */ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) { - unsigned long free, allowed; + unsigned long free, allowed, reserve; vm_acct_memory(pages); @@ -183,10 +184,13 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) allowed -= allowed / 32; allowed += total_swap_pages; - /* Don't let a single process grow too big: - leave 3% of the size of this process for other processes */ - if (mm) - allowed -= mm->total_vm / 32; + /* + * Don't let a single process grow so big a user can't recover + */ + if (mm) { + reserve = sysctl_user_reserve_kbytes >> (PAGE_SHIFT - 10); + allowed -= min(mm->total_vm / 32, reserve); + } if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; @@ -3094,3 +3098,24 @@ void __init mmap_init(void) ret = percpu_counter_init(&vm_committed_as, 0); VM_BUG_ON(ret); } + +/* + * Initialise sysctl_user_reserve_kbytes. + * + * This is intended to prevent a user from starting a single memory hogging + * process, such that they cannot recover (kill the hog) in OVERCOMMIT_NEVER + * mode. + * + * The default value is min(3% of free memory, 128MB) + * 128MB is enough to recover with sshd/login, bash, and top/kill. + */ +static int __meminit init_user_reserve(void) +{ + unsigned long free_kbytes; + + free_kbytes = global_page_state(NR_FREE_PAGES) << (PAGE_SHIFT - 10); + + sysctl_user_reserve_kbytes = min(free_kbytes / 32, 1UL << 17); + return 0; +} +module_init(init_user_reserve) diff --git a/mm/nommu.c b/mm/nommu.c index 2f1c75e..58e4a0a 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -63,6 +63,7 @@ int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT; int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS; +unsigned long sysctl_user_reserve_kbytes __read_mostly = 1UL << 17; /* 128MB */ int heap_stack_gap = 0; atomic_long_t mmap_pages_allocated; @@ -1897,7 +1898,7 @@ EXPORT_SYMBOL(unmap_mapping_range); */ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) { - unsigned long free, allowed; + unsigned long free, allowed, reserve; vm_acct_memory(pages); @@ -1957,10 +1958,13 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) allowed -= allowed / 32; allowed += total_swap_pages; - /* Don't let a single process grow too big: - leave 3% of the size of this process for other processes */ - if (mm) - allowed -= mm->total_vm / 32; + /* + * Don't let a single process grow so big a user can't recover + */ + if (mm) { + reserve = sysctl_user_reserve_kbytes >> (PAGE_SHIFT - 10); + allowed -= min(mm->total_vm / 32, reserve); + } if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; @@ -2122,3 +2126,24 @@ int nommu_shrink_inode_mappings(struct inode *inode, size_t size, up_write(&nommu_region_sem); return 0; } + +/* + * Initialise sysctl_user_reserve_kbytes. + * + * This is intended to prevent a user from starting a single memory hogging + * process, such that they cannot recover (kill the hog) in OVERCOMMIT_NEVER + * mode. + * + * The default value is min(3% of free memory, 128MB) + * 128MB is enough to recover with sshd/login, bash, and top/kill. + */ +static int __meminit init_user_reserve(void) +{ + unsigned long free_kbytes; + + free_kbytes = global_page_state(NR_FREE_PAGES) << (PAGE_SHIFT - 10); + + sysctl_user_reserve_kbytes = min(free_kbytes / 32, 1UL << 17); + return 0; +} +module_init(init_user_reserve) -- 2.7.4