From c7d059cae31f328bbe2be6ab737226d338f22486 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 6 Oct 2012 09:12:44 +0100 Subject: [PATCH] SERIAL: omap: always set TCR We always setup the TCR register in the software flow control path, and when hardware flow control is enabled. Remove this redundant setup, and place it before we setup any hardware flow control. Signed-off-by: Russell King --- drivers/tty/serial/omap-serial.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index fbce4c2..7180ffc 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -898,31 +898,30 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, else serial_out(up, UART_OMAP_MDR1, up->mdr1); - /* Hardware Flow Control Configuration */ + /* Enable access to TCR/TLR */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable access to TCR/TLR */ - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + /* Hardware Flow Control Configuration */ + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { /* Enable AUTORTS and AUTOCTS */ up->efr |= UART_EFR_CTS | UART_EFR_RTS; /* Ensure MCR RTS is asserted */ up->mcr |= UART_MCR_RTS; - - /* Disable access to TCR/TLR */ - serial_out(up, UART_MCR, up->mcr); } else { /* Disable AUTORTS and AUTOCTS */ up->efr &= ~(UART_EFR_CTS | UART_EFR_RTS); } if (up->port.flags & UPF_SOFT_FLOW) { + /* Disable access to TCR/TLR */ + serial_out(up, UART_MCR, up->mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, up->efr); @@ -961,14 +960,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->mcr |= UART_MCR_XONANY; else up->mcr &= ~UART_MCR_XONANY; - - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr); } + serial_out(up, UART_MCR, up->mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, up->lcr); -- 2.7.4