From c7941422cff96874fc76c9b127eaf0be5dc7d7af Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 5 Apr 2020 03:47:03 +0300 Subject: [PATCH] dt-bindings: display: bridge: Remove deprecated dw_hdmi.txt dw_hdmi.txt has been replaced with synopsys,dw-hdmi.yaml, and all references to the old file have been converted. Remove it. Signed-off-by: Laurent Pinchart Acked-by: Rob Herring --- .../devicetree/bindings/display/bridge/dw_hdmi.txt | 33 ---------------------- 1 file changed, 33 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt deleted file mode 100644 index 33bf981..0000000 --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt +++ /dev/null @@ -1,33 +0,0 @@ -Synopsys DesignWare HDMI TX Encoder -=================================== - -This document defines device tree properties for the Synopsys DesignWare HDMI -TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding -specification by itself but is meant to be referenced by platform-specific -device tree bindings. - -When referenced from platform device tree bindings the properties defined in -this document are defined as follows. The platform device tree bindings are -responsible for defining whether each property is required or optional. - -- reg: Memory mapped base address and length of the DWC HDMI TX registers. - -- reg-io-width: Width of the registers specified by the reg property. The - value is expressed in bytes and must be equal to 1 or 4 if specified. The - register width defaults to 1 if the property is not present. - -- interrupts: Reference to the DWC HDMI TX interrupt. - -- clocks: References to all the clocks specified in the clock-names property - as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. - -- clock-names: The DWC HDMI TX uses the following clocks. - - - "iahb" is the bus clock for either AHB and APB (mandatory). - - "isfr" is the internal register configuration clock (mandatory). - - "cec" is the HDMI CEC controller main clock (optional). - -- ports: The connectivity of the DWC HDMI TX with the rest of the system is - expressed in using ports as specified in the device graph bindings defined - in Documentation/devicetree/bindings/graph.txt. The numbering of the ports - is platform-specific. -- 2.7.4