From c6a258d20d539ac88f931da6ac4d10e45f4a86e0 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 23 May 2013 13:28:09 +0200 Subject: [PATCH] brcmfmac: Add generic platform support This patch adds basic support for generic platforms that do not require special platform data. Signed-off-by: Tomasz Figa --- .../bindings/net/wireless/brcm,bcm43xx-fmac.txt | 41 ++++++++++++ .../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 78 ++++++++++++++++++++++ 2 files changed, 119 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt new file mode 100644 index 0000000..57ca99c --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -0,0 +1,41 @@ +Broadcom BCM43xx-series FullMAC WLAN network adapter + +Required properties: +- compatible: should be one of following: + - "brcm,bcm43143" - for BCM43134 chip, + - "brcm,bcm4324" - for BCM4324 chip, + - "brcm,bcm4329" - for BCM4329 chip, + - "brcm,bcm4330" - for BCM4330 chip, + - "brcm,bcm4334" - for BCM4334 chip, + - "brcm,bcm4335" - for BCM4335 chip. +- wlan-supply: regulator used to control power of WLAN block of the chip. + +Optional properties: +- interrupt-parent: interrupt controller to which the out-of-bound interrupt + signal of the chip (usually WL_HOST_WAKE pin) is connected. +- interrupts: interrupt specifier of the out-of-bound interrupt in format + specific to interrupt controller specifiedy by interrupt-parent property. +- clock-names: Should contain one clock entry - "32khz", which is the external + 32768 Hz clock used by the chip. +- clocks: Clock specifiers given in the same order as specified in clock-names + property. + +Example: + + wlan_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "WL_REG_ON"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpj0 0 0>; + enable-active-high; + }; + + wlan { + compatible = "brcm,bcm4334"; + wlan-supply = <&wlan_reg>; + interrupt-parent = <&gpx2>; + interrupts = <5 4>; + clocks = <&max77686 2>; + clock-names = "32khz"; + }; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 0f6eb2b..61c6e67 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -16,17 +16,20 @@ #include #include +#include #include #include #include #include #include +#include #include #include #include /* request_irq() */ #include #include #include +#include #include #include @@ -573,11 +576,73 @@ static struct sdio_driver brcmf_sdmmc_driver = { #endif /* CONFIG_PM_SLEEP */ }; +static struct regulator *brcmf_regulator; +static struct clk *brcmf_clock; + +static void brcmf_generic_power_on(void) +{ + if (regulator_enable(brcmf_regulator) < 0) + pr_warn("%s: failed to enable regulator\n", __func__); + if (!IS_ERR(brcmf_clock)) + clk_prepare_enable(brcmf_clock); +} + +static void brcmf_generic_power_off(void) +{ + if (!IS_ERR(brcmf_clock)) + clk_disable_unprepare(brcmf_clock); + regulator_disable(brcmf_regulator); +} + +static void brcmf_generic_reset(void) +{ + brcmf_generic_power_off(); + msleep(10); + brcmf_generic_power_on(); +} + +static struct brcmfmac_sdio_platform_data *brcmf_generic_pdata( + struct platform_device *pdev) +{ + struct brcmfmac_sdio_platform_data *pdata; + struct resource *res; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return pdata; + + brcmf_regulator = devm_regulator_get(&pdev->dev, "wlan"); + if (IS_ERR(brcmf_regulator)) + return NULL; + + brcmf_clock = devm_clk_get(&pdev->dev, "32khz"); + if (IS_ERR(brcmf_clock)) + dev_warn(&pdev->dev, "no 32khz clock provided, assuming always on\n"); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) { + pdata->oob_irq_supported = true; + pdata->oob_irq_nr = res->start; + pdata->oob_irq_flags = res->flags; + } + + pdata->power_on = brcmf_generic_power_on; + pdata->power_off = brcmf_generic_power_off; + pdata->reset = brcmf_generic_reset; + + return pdata; +} + static int brcmf_sdio_pd_probe(struct platform_device *pdev) { brcmf_dbg(SDIO, "Enter\n"); brcmfmac_sdio_pdata = pdev->dev.platform_data; + if (!brcmfmac_sdio_pdata) + brcmfmac_sdio_pdata = brcmf_generic_pdata(pdev); + + if (!brcmfmac_sdio_pdata) + return -EINVAL; if (brcmfmac_sdio_pdata->power_on) brcmfmac_sdio_pdata->power_on(); @@ -597,9 +662,22 @@ static int brcmf_sdio_pd_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static struct of_device_id brcmf_sdio_pd_of_match[] = { + { .compatible = "brcm,bcm43143", }, + { .compatible = "brcm,bcm4324", }, + { .compatible = "brcm,bcm4329", }, + { .compatible = "brcm,bcm4330", }, + { .compatible = "brcm,bcm4334", }, + { .compatible = "brcm,bcm4335", }, + { /* sentinel */ } +}; +#endif + static struct platform_driver brcmf_sdio_pd = { .remove = brcmf_sdio_pd_remove, .driver = { + .of_match_table = of_match_ptr(brcmf_sdio_pd_of_match), .name = BRCMFMAC_SDIO_PDATA_NAME } }; -- 2.7.4