From c6461f5c5970833cf28c5096cdfc7a095eb3bbb5 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 25 Feb 2011 15:49:53 -0700 Subject: [PATCH] OMAP2+: clock: disable autoidle on all clocks during clock init Disable autoidle on all clocks during clock framework initialization. (If CONFIG_PM is set, autoidle is re-enabled for all clocks later in the boot process.) The principle behind this patch, and some similar patches, is that the kernel should start with all power management features disabled. Later in the boot process, the PM code, if compiled in with CONFIG_PM, enables or re-enables power management features. Signed-off-by: Paul Walmsley Tested-by: Rajendra Nayak Reviewed-by: Kevin Hilman --- arch/arm/mach-omap2/clock2420_data.c | 3 +++ arch/arm/mach-omap2/clock2430_data.c | 3 +++ arch/arm/mach-omap2/clock3xxx.c | 3 --- arch/arm/mach-omap2/clock3xxx_data.c | 6 +++++- arch/arm/mach-omap2/clock44xx_data.c | 3 +++ 5 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 0a992bc..ee73e14 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1913,6 +1913,9 @@ int __init omap2420_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + /* Check the MPU rate set by bootloader */ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); for (prcm = rate_table; prcm->mpu_speed; prcm++) { diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index c047dcd..a1298e5 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -2028,6 +2028,9 @@ int __init omap2430_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + /* Check the MPU rate set by bootloader */ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); for (prcm = rate_table; prcm->mpu_speed; prcm++) { diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index e9f66b6..952c3e0 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -65,9 +65,6 @@ void __init omap3_clk_lock_dpll5(void) clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); clk_enable(dpll5_clk); - /* Enable autoidle to allow it to enter low power bypass */ - omap3_dpll_allow_idle(dpll5_clk); - /* Program dpll5_m2_clk divider for no division */ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); clk_enable(dpll5_m2_clk); diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 78ea799..65b79e6 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3538,6 +3538,9 @@ int __init omap3xxx_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + recalculate_root_clocks(); pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n", @@ -3551,7 +3554,8 @@ int __init omap3xxx_clk_init(void) clk_enable_init_clocks(); /* - * Lock DPLL5 and put it in autoidle. + * Lock DPLL5 -- here only until other device init code can + * handle this */ if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0)) omap3_clk_lock_dpll5(); diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index dcbe105..2795342 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3309,6 +3309,9 @@ int __init omap4xxx_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + recalculate_root_clocks(); /* -- 2.7.4