From c56ac7a0f468ceb38d24db41f4446d98ab94da2d Mon Sep 17 00:00:00 2001 From: Guillaume Tucker Date: Fri, 6 Nov 2020 09:06:31 +0000 Subject: [PATCH] rtc: hym8563: enable wakeup when applicable Enable wakeup in the hym8563 driver if the IRQ was successfully requested or if wakeup-source is set in the devicetree. As per the description of device_init_wakeup(), it should be enabled for "devices that everyone expects to be wakeup sources". One would expect this to be the case with a real-time clock. Tested on rk3288-rock2-square, which has an IRQ configured for the RTC. As a result, wakeup was enabled during driver initialisation. Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver") Reported-by: kernelci.org bot Signed-off-by: Guillaume Tucker Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/1ea023e2ba50a4dab6e39be93d7de3146af71a60.1604653374.git.guillaume.tucker@collabora.com --- drivers/rtc/rtc-hym8563.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c index 0fb79c4..24e0095 100644 --- a/drivers/rtc/rtc-hym8563.c +++ b/drivers/rtc/rtc-hym8563.c @@ -527,8 +527,6 @@ static int hym8563_probe(struct i2c_client *client, hym8563->client = client; i2c_set_clientdata(client, hym8563); - device_set_wakeup_capable(&client->dev, true); - ret = hym8563_init_device(client); if (ret) { dev_err(&client->dev, "could not init device, %d\n", ret); @@ -547,6 +545,11 @@ static int hym8563_probe(struct i2c_client *client, } } + if (client->irq > 0 || + device_property_read_bool(&client->dev, "wakeup-source")) { + device_init_wakeup(&client->dev, true); + } + /* check state of calendar information */ ret = i2c_smbus_read_byte_data(client, HYM8563_SEC); if (ret < 0) -- 2.7.4