From c5454ff0465cc11974f8f499d697c2fe1ebcfcc1 Mon Sep 17 00:00:00 2001 From: Jakob Stoklund Olesen Date: Tue, 16 Jul 2013 18:26:15 +0000 Subject: [PATCH] Reapply r185393. Original commit message: Remove floating point computations from SpillPlacement.cpp. Patch by Benjamin Kramer! Use the BlockFrequency class instead of floats in the Hopfield network computations. This rescales the node Bias field from a [-2;2] float range to two block frequencies BiasN and BiasP pulling in opposite directions. This construct has a more predictable behavior when block frequencies saturate. The per-node scaling factors are no longer necessary, assuming the block frequencies around a bundle are consistent. This patch can cause the register allocator to make different spilling decisions. The differences should be small. llvm-svn: 186434 --- llvm/lib/CodeGen/SpillPlacement.cpp | 155 +++++++++++++++++------------------- llvm/lib/CodeGen/SpillPlacement.h | 7 +- 2 files changed, 80 insertions(+), 82 deletions(-) diff --git a/llvm/lib/CodeGen/SpillPlacement.cpp b/llvm/lib/CodeGen/SpillPlacement.cpp index 840f05b..10a93b7 100644 --- a/llvm/lib/CodeGen/SpillPlacement.cpp +++ b/llvm/lib/CodeGen/SpillPlacement.cpp @@ -59,6 +59,10 @@ void SpillPlacement::getAnalysisUsage(AnalysisUsage &AU) const { MachineFunctionPass::getAnalysisUsage(AU); } +/// Decision threshold. A node gets the output value 0 if the weighted sum of +/// its inputs falls in the open interval (-Threshold;Threshold). +static const BlockFrequency Threshold = 2; + /// Node - Each edge bundle corresponds to a Hopfield node. /// /// The node contains precomputed frequency data that only depends on the CFG, @@ -69,31 +73,25 @@ void SpillPlacement::getAnalysisUsage(AnalysisUsage &AU) const { /// because all weights are positive. /// struct SpillPlacement::Node { - /// Scale - Inverse block frequency feeding into[0] or out of[1] the bundle. - /// Ideally, these two numbers should be identical, but inaccuracies in the - /// block frequency estimates means that we need to normalize ingoing and - /// outgoing frequencies separately so they are commensurate. - float Scale[2]; - - /// Bias - Normalized contributions from non-transparent blocks. - /// A bundle connected to a MustSpill block has a huge negative bias, - /// otherwise it is a number in the range [-2;2]. - float Bias; + /// BiasN - Sum of blocks that prefer a spill. + BlockFrequency BiasN; + /// BiasP - Sum of blocks that prefer a register. + BlockFrequency BiasP; /// Value - Output value of this node computed from the Bias and links. - /// This is always in the range [-1;1]. A positive number means the variable - /// should go in a register through this bundle. - float Value; + /// This is always on of the values {-1, 0, 1}. A positive number means the + /// variable should go in a register through this bundle. + int Value; - typedef SmallVector, 4> LinkVector; + typedef SmallVector, 4> LinkVector; /// Links - (Weight, BundleNo) for all transparent blocks connecting to other - /// bundles. The weights are all positive and add up to at most 2, weights - /// from ingoing and outgoing nodes separately add up to a most 1. The weight - /// sum can be less than 2 when the variable is not live into / out of some - /// connected basic blocks. + /// bundles. The weights are all positive block frequencies. LinkVector Links; + /// SumLinkWeights - Cached sum of the weights of all links + ThresHold. + BlockFrequency SumLinkWeights; + /// preferReg - Return true when this node prefers to be in a register. bool preferReg() const { // Undecided nodes (Value==0) go on the stack. @@ -102,28 +100,24 @@ struct SpillPlacement::Node { /// mustSpill - Return True if this node is so biased that it must spill. bool mustSpill() const { - // Actually, we must spill if Bias < sum(weights). - // It may be worth it to compute the weight sum here? - return Bias < -2.0f; - } - - /// Node - Create a blank Node. - Node() { - Scale[0] = Scale[1] = 0; + // We must spill if Bias < -sum(weights) or the MustSpill flag was set. + // BiasN is saturated when MustSpill is set, make sure this still returns + // true when the RHS saturates. Note that SumLinkWeights includes Threshold. + return BiasN >= BiasP + SumLinkWeights; } /// clear - Reset per-query data, but preserve frequencies that only depend on // the CFG. void clear() { - Bias = Value = 0; + BiasN = BiasP = Value = 0; + SumLinkWeights = Threshold; Links.clear(); } /// addLink - Add a link to bundle b with weight w. - /// out=0 for an ingoing link, and 1 for an outgoing link. - void addLink(unsigned b, float w, bool out) { - // Normalize w relative to all connected blocks from that direction. - w *= Scale[out]; + void addLink(unsigned b, BlockFrequency w) { + // Update cached sum. + SumLinkWeights += w; // There can be multiple links to the same bundle, add them up. for (LinkVector::iterator I = Links.begin(), E = Links.end(); I != E; ++I) @@ -135,33 +129,48 @@ struct SpillPlacement::Node { Links.push_back(std::make_pair(w, b)); } - /// addBias - Bias this node from an ingoing[0] or outgoing[1] link. - /// Return the change to the total number of positive biases. - void addBias(float w, bool out) { - // Normalize w relative to all connected blocks from that direction. - w *= Scale[out]; - Bias += w; + /// addBias - Bias this node. + void addBias(BlockFrequency freq, BorderConstraint direction) { + switch (direction) { + default: + break; + case PrefReg: + BiasP += freq; + break; + case PrefSpill: + BiasN += freq; + break; + case MustSpill: + BiasN = BlockFrequency::getMaxFrequency(); + break; + } } /// update - Recompute Value from Bias and Links. Return true when node /// preference changes. bool update(const Node nodes[]) { // Compute the weighted sum of inputs. - float Sum = Bias; - for (LinkVector::iterator I = Links.begin(), E = Links.end(); I != E; ++I) - Sum += I->first * nodes[I->second].Value; + BlockFrequency SumN = BiasN; + BlockFrequency SumP = BiasP; + for (LinkVector::iterator I = Links.begin(), E = Links.end(); I != E; ++I) { + if (nodes[I->second].Value == -1) + SumN += I->first; + else if (nodes[I->second].Value == 1) + SumP += I->first; + } - // The weighted sum is going to be in the range [-2;2]. Ideally, we should - // simply set Value = sign(Sum), but we will add a dead zone around 0 for - // two reasons: + // Each weighted sum is going to be less than the total frequency of the + // bundle. Ideally, we should simply set Value = sign(SumP - SumN), but we + // will add a dead zone around 0 for two reasons: + // // 1. It avoids arbitrary bias when all links are 0 as is possible during // initial iterations. // 2. It helps tame rounding errors when the links nominally sum to 0. - const float Thres = 1e-4f; + // bool Before = preferReg(); - if (Sum < -Thres) + if (SumN >= SumP + Threshold) Value = -1; - else if (Sum > Thres) + else if (SumP >= SumN + Threshold) Value = 1; else Value = 0; @@ -178,23 +187,13 @@ bool SpillPlacement::runOnMachineFunction(MachineFunction &mf) { nodes = new Node[bundles->getNumBundles()]; // Compute total ingoing and outgoing block frequencies for all bundles. - BlockFrequency.resize(mf.getNumBlockIDs()); + BlockFrequencies.resize(mf.getNumBlockIDs()); MachineBlockFrequencyInfo &MBFI = getAnalysis(); - float EntryFreq = BlockFrequency::getEntryFrequency(); for (MachineFunction::iterator I = mf.begin(), E = mf.end(); I != E; ++I) { - float Freq = MBFI.getBlockFreq(I).getFrequency() / EntryFreq; unsigned Num = I->getNumber(); - BlockFrequency[Num] = Freq; - nodes[bundles->getBundle(Num, 1)].Scale[0] += Freq; - nodes[bundles->getBundle(Num, 0)].Scale[1] += Freq; + BlockFrequencies[Num] = MBFI.getBlockFreq(I); } - // Scales are reciprocal frequencies. - for (unsigned i = 0, e = bundles->getNumBundles(); i != e; ++i) - for (unsigned d = 0; d != 2; ++d) - if (nodes[i].Scale[d] > 0) - nodes[i].Scale[d] = 1 / nodes[i].Scale[d]; - // We never change the function. return false; } @@ -215,12 +214,15 @@ void SpillPlacement::activate(unsigned n) { // landing pads, or loops with many 'continue' statements. It is difficult to // allocate registers when so many different blocks are involved. // - // Give a small negative bias to large bundles such that 1/32 of the - // connected blocks need to be interested before we consider expanding the - // region through the bundle. This helps compile time by limiting the number - // of blocks visited and the number of links in the Hopfield network. - if (bundles->getBlocks(n).size() > 100) - nodes[n].Bias = -0.0625f; + // Give a small negative bias to large bundles such that a substantial + // fraction of the connected blocks need to be interested before we consider + // expanding the region through the bundle. This helps compile time by + // limiting the number of blocks visited and the number of links in the + // Hopfield network. + if (bundles->getBlocks(n).size() > 100) { + nodes[n].BiasP = 0; + nodes[n].BiasN = (BlockFrequency::getEntryFrequency() / 16); + } } @@ -229,27 +231,20 @@ void SpillPlacement::activate(unsigned n) { void SpillPlacement::addConstraints(ArrayRef LiveBlocks) { for (ArrayRef::iterator I = LiveBlocks.begin(), E = LiveBlocks.end(); I != E; ++I) { - float Freq = getBlockFrequency(I->Number); - const float Bias[] = { - 0, // DontCare, - 1, // PrefReg, - -1, // PrefSpill - 0, // PrefBoth - -HUGE_VALF // MustSpill - }; + BlockFrequency Freq = BlockFrequencies[I->Number]; // Live-in to block? if (I->Entry != DontCare) { unsigned ib = bundles->getBundle(I->Number, 0); activate(ib); - nodes[ib].addBias(Freq * Bias[I->Entry], 1); + nodes[ib].addBias(Freq, I->Entry); } // Live-out from block? if (I->Exit != DontCare) { unsigned ob = bundles->getBundle(I->Number, 1); activate(ob); - nodes[ob].addBias(Freq * Bias[I->Exit], 0); + nodes[ob].addBias(Freq, I->Exit); } } } @@ -258,15 +253,15 @@ void SpillPlacement::addConstraints(ArrayRef LiveBlocks) { void SpillPlacement::addPrefSpill(ArrayRef Blocks, bool Strong) { for (ArrayRef::iterator I = Blocks.begin(), E = Blocks.end(); I != E; ++I) { - float Freq = getBlockFrequency(*I); + BlockFrequency Freq = BlockFrequencies[*I]; if (Strong) Freq += Freq; unsigned ib = bundles->getBundle(*I, 0); unsigned ob = bundles->getBundle(*I, 1); activate(ib); activate(ob); - nodes[ib].addBias(-Freq, 1); - nodes[ob].addBias(-Freq, 0); + nodes[ib].addBias(Freq, PrefSpill); + nodes[ob].addBias(Freq, PrefSpill); } } @@ -286,9 +281,9 @@ void SpillPlacement::addLinks(ArrayRef Links) { Linked.push_back(ib); if (nodes[ob].Links.empty() && !nodes[ob].mustSpill()) Linked.push_back(ob); - float Freq = getBlockFrequency(Number); - nodes[ib].addLink(ob, Freq, 1); - nodes[ob].addLink(ib, Freq, 0); + BlockFrequency Freq = BlockFrequencies[Number]; + nodes[ib].addLink(ob, Freq); + nodes[ob].addLink(ib, Freq); } } diff --git a/llvm/lib/CodeGen/SpillPlacement.h b/llvm/lib/CodeGen/SpillPlacement.h index fc412f8..a0480d5 100644 --- a/llvm/lib/CodeGen/SpillPlacement.h +++ b/llvm/lib/CodeGen/SpillPlacement.h @@ -30,6 +30,7 @@ #include "llvm/ADT/ArrayRef.h" #include "llvm/ADT/SmallVector.h" #include "llvm/CodeGen/MachineFunctionPass.h" +#include "llvm/Support/BlockFrequency.h" namespace llvm { @@ -57,7 +58,7 @@ class SpillPlacement : public MachineFunctionPass { SmallVector RecentPositive; // Block frequencies are computed once. Indexed by block number. - SmallVector BlockFrequency; + SmallVector BlockFrequencies; public: static char ID; // Pass identification, replacement for typeid. @@ -140,7 +141,9 @@ public: /// getBlockFrequency - Return the estimated block execution frequency per /// function invocation. float getBlockFrequency(unsigned Number) const { - return BlockFrequency[Number]; + // FIXME: Return the BlockFrequency directly. + const float Scale = 1.0f / BlockFrequency::getEntryFrequency(); + return BlockFrequencies[Number].getFrequency() * Scale; } private: -- 2.7.4