From c44690a157719437d09c83eec393211e7fd65076 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 23 Dec 2014 09:47:11 +0200 Subject: [PATCH] wil6210: fix max. MPDU size When configuring Tx/Rx VRING's, driver need to specify max. MPDU size It should take into account all overhead introduced by 802.3->208.11 transformation. Signed-off-by: Vladimir Kondratiev Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/main.c | 2 +- drivers/net/wireless/ath/wil6210/txrx.c | 2 +- drivers/net/wireless/ath/wil6210/txrx.h | 4 ++-- drivers/net/wireless/ath/wil6210/wil6210.h | 12 +++++++++++- drivers/net/wireless/ath/wil6210/wmi.c | 2 +- 5 files changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 18a2eb5..0af51fc 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -41,7 +41,7 @@ MODULE_PARM_DESC(itr_trsh, " Interrupt moderation threshold, usecs."); /* We allow allocation of more than 1 page buffers to support large packets. * It is suboptimal behavior performance wise in case MTU above page size. */ -unsigned int mtu_max = TXRX_BUF_LEN_DEFAULT - ETH_HLEN; +unsigned int mtu_max = TXRX_BUF_LEN_DEFAULT - WIL_MAX_MPDU_OVERHEAD; static int mtu_max_set(const char *val, const struct kernel_param *kp) { int ret; diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index b7ffcfb..f33ea57 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -645,7 +645,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size, .vring_cfg = { .tx_sw_ring = { .max_mpdu_size = - cpu_to_le16(mtu_max + ETH_HLEN), + cpu_to_le16(wil_mtu2macbuf(mtu_max)), .ring_size = cpu_to_le16(size), }, .ringid = id, diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h index 630aeb5..e7db356 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.h +++ b/drivers/net/wireless/ath/wil6210/txrx.h @@ -20,8 +20,8 @@ #define BUF_SW_OWNED (1) #define BUF_HW_OWNED (0) -/* size of max. Tx/Rx buffers, as supported by FW */ -#define TXRX_BUF_LEN_DEFAULT (2242) +/* default size of MAC Tx/Rx buffers */ +#define TXRX_BUF_LEN_DEFAULT (2048) /* how many bytes to reserve for rtap header? */ #define WIL6210_RTAP_SIZE (128) diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 1b4efd2..bedb9ed 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -62,11 +62,21 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1) #define WIL_MAX_AGG_WSIZE (32) /* FW/HW limit */ /* Hardware offload block adds the following: * 26 bytes - 3-address QoS data header + * 8 bytes - IV + EIV (for GCMP) * 8 bytes - SNAP + * 16 bytes - MIC (for GCMP) * 4 bytes - CRC - * 24 bytes - security related (if connection is secure) */ #define WIL_MAX_MPDU_OVERHEAD (62) + +/* Calculate MAC buffer size for the firmware. It includes all overhead, + * as it will go over the air, and need to be 8 byte aligned + */ +static inline u32 wil_mtu2macbuf(u32 mtu) +{ + return ALIGN(mtu + WIL_MAX_MPDU_OVERHEAD, 8); +} + /* Max supported by wil6210 value for interrupt threshold is 5sec. */ #define WIL6210_ITR_TRSH_MAX (5000000) #define WIL6210_ITR_TRSH_DEFAULT (300) /* usec */ diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index af2ca46..70b055c 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -1083,7 +1083,7 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring) struct wmi_cfg_rx_chain_cmd cmd = { .action = WMI_RX_CHAIN_ADD, .rx_sw_ring = { - .max_mpdu_size = cpu_to_le16(mtu_max + ETH_HLEN), + .max_mpdu_size = cpu_to_le16(wil_mtu2macbuf(mtu_max)), .ring_mem_base = cpu_to_le64(vring->pa), .ring_size = cpu_to_le16(vring->size), }, -- 2.7.4