From c3ec8bcceb07ab81e4ff017b4ebbacc137a5a15e Mon Sep 17 00:00:00 2001 From: Ganesh Goudar Date: Fri, 14 Sep 2018 17:35:55 +0530 Subject: [PATCH] cxgb4: update supported DCB version - In CXGB4_DCB_STATE_FW_INCOMPLETE state check if the dcb version is changed and update the dcb supported version. - Also, fill the priority code point value for priority based flow control. Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 27 ++++++++++++++++++++++++++ drivers/net/ethernet/chelsio/cxgb4/l2t.c | 6 ++++-- 2 files changed, 31 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c index b34f0f0..6ba3104 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c @@ -114,6 +114,24 @@ void cxgb4_dcb_reset(struct net_device *dev) cxgb4_dcb_state_init(dev); } +/* update the dcb port support, if version is IEEE then set it to + * FW_PORT_DCB_VER_IEEE and if DCB_CAP_DCBX_VER_CEE is already set then + * clear that. and if it is set to CEE then set dcb supported to + * DCB_CAP_DCBX_VER_CEE & if DCB_CAP_DCBX_VER_IEEE is set, clear it + */ +static inline void cxgb4_dcb_update_support(struct port_dcb_info *dcb) +{ + if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE) { + if (dcb->supported & DCB_CAP_DCBX_VER_CEE) + dcb->supported &= ~DCB_CAP_DCBX_VER_CEE; + dcb->supported |= DCB_CAP_DCBX_VER_IEEE; + } else if (dcb->dcb_version == FW_PORT_DCB_VER_CEE1D01) { + if (dcb->supported & DCB_CAP_DCBX_VER_IEEE) + dcb->supported &= ~DCB_CAP_DCBX_VER_IEEE; + dcb->supported |= DCB_CAP_DCBX_VER_CEE; + } +} + /* Finite State machine for Data Center Bridging. */ void cxgb4_dcb_state_fsm(struct net_device *dev, @@ -165,6 +183,15 @@ void cxgb4_dcb_state_fsm(struct net_device *dev, } case CXGB4_DCB_STATE_FW_INCOMPLETE: { + if (transition_to != CXGB4_DCB_INPUT_FW_DISABLED) { + /* during this CXGB4_DCB_STATE_FW_INCOMPLETE state, + * check if the dcb version is changed (there can be + * mismatch in default config & the negotiated switch + * configuration at FW, so update the dcb support + * accordingly. + */ + cxgb4_dcb_update_support(dcb); + } switch (transition_to) { case CXGB4_DCB_INPUT_FW_ENABLED: { /* we're alreaady in firmware DCB mode */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c index 301c4df..99022c0 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c +++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c @@ -433,10 +433,12 @@ struct l2t_entry *cxgb4_l2t_get(struct l2t_data *d, struct neighbour *neigh, else lport = netdev2pinfo(physdev)->lport; - if (is_vlan_dev(neigh->dev)) + if (is_vlan_dev(neigh->dev)) { vlan = vlan_dev_vlan_id(neigh->dev); - else + vlan |= vlan_dev_get_egress_qos_mask(neigh->dev, priority); + } else { vlan = VLAN_NONE; + } write_lock_bh(&d->lock); for (e = d->l2tab[hash].first; e; e = e->next) -- 2.7.4