From c3bfcd4c676238e198d5a798b50e5d424bf05497 Mon Sep 17 00:00:00 2001 From: Mark Pearson Date: Mon, 11 Jan 2021 11:22:37 -0500 Subject: [PATCH] platform/x86: thinkpad_acpi: Add platform profile support Add support to thinkpad_acpi for Lenovo platforms that have DYTC version 5 support or newer to use the platform profile feature. This will allow users to determine and control the platform modes between low-power, balanced operation and performance modes. Signed-off-by: Mark Pearson Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20210111162237.3469-1-markpearson@lenovo.com Signed-off-by: Hans de Goede --- drivers/platform/x86/thinkpad_acpi.c | 294 ++++++++++++++++++++++++++++++++++- 1 file changed, 288 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 48575ef..18b3901 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -66,6 +66,7 @@ #include #include #include +#include #include #include #include @@ -9855,16 +9856,27 @@ static bool has_lapsensor; static bool palm_state; static bool lap_state; -static int lapsensor_get(bool *present, bool *state) +static int dytc_command(int command, int *output) { acpi_handle dytc_handle; - int output; - *present = false; - if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle))) + if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle))) { + /* Platform doesn't support DYTC */ return -ENODEV; - if (!acpi_evalf(dytc_handle, &output, NULL, "dd", DYTC_CMD_GET)) + } + if (!acpi_evalf(dytc_handle, output, NULL, "dd", command)) return -EIO; + return 0; +} + +static int lapsensor_get(bool *present, bool *state) +{ + int output, err; + + *present = false; + err = dytc_command(DYTC_CMD_GET, &output); + if (err) + return err; *present = true; /*If we get his far, we have lapmode support*/ *state = output & BIT(DYTC_GET_LAPMODE_BIT) ? true : false; @@ -9983,6 +9995,264 @@ static struct ibm_struct proxsensor_driver_data = { .exit = proxsensor_exit, }; +#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE) + +/************************************************************************* + * DYTC Platform Profile interface + */ + +#define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */ +#define DYTC_CMD_SET 1 /* To enable/disable IC function mode */ +#define DYTC_CMD_RESET 0x1ff /* To reset back to default */ + +#define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */ +#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */ +#define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */ + +#define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */ +#define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */ + +#define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */ +#define DYTC_SET_MODE_BIT 16 /* Bits 16-19 - mode setting */ +#define DYTC_SET_VALID_BIT 20 /* Bit 20 - 1 = on, 0 = off */ + +#define DYTC_FUNCTION_STD 0 /* Function = 0, standard mode */ +#define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */ +#define DYTC_FUNCTION_MMC 11 /* Function = 11, desk mode */ + +#define DYTC_MODE_PERFORM 2 /* High power mode aka performance */ +#define DYTC_MODE_LOWPOWER 3 /* Low power mode */ +#define DYTC_MODE_BALANCE 0xF /* Default mode aka balanced */ + +#define DYTC_SET_COMMAND(function, mode, on) \ + (DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \ + (mode) << DYTC_SET_MODE_BIT | \ + (on) << DYTC_SET_VALID_BIT) + +#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0) + +#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1) + +static bool dytc_profile_available; +static enum platform_profile_option dytc_current_profile; +static atomic_t dytc_ignore_event = ATOMIC_INIT(0); +static DEFINE_MUTEX(dytc_mutex); + +static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile) +{ + switch (dytcmode) { + case DYTC_MODE_LOWPOWER: + *profile = PLATFORM_PROFILE_LOW_POWER; + break; + case DYTC_MODE_BALANCE: + *profile = PLATFORM_PROFILE_BALANCED; + break; + case DYTC_MODE_PERFORM: + *profile = PLATFORM_PROFILE_PERFORMANCE; + break; + default: /* Unknown mode */ + return -EINVAL; + } + return 0; +} + +static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode) +{ + switch (profile) { + case PLATFORM_PROFILE_LOW_POWER: + *perfmode = DYTC_MODE_LOWPOWER; + break; + case PLATFORM_PROFILE_BALANCED: + *perfmode = DYTC_MODE_BALANCE; + break; + case PLATFORM_PROFILE_PERFORMANCE: + *perfmode = DYTC_MODE_PERFORM; + break; + default: /* Unknown profile */ + return -EOPNOTSUPP; + } + return 0; +} + +/* + * dytc_profile_get: Function to register with platform_profile + * handler. Returns current platform profile. + */ +int dytc_profile_get(struct platform_profile_handler *pprof, + enum platform_profile_option *profile) +{ + *profile = dytc_current_profile; + return 0; +} + +/* + * Helper function - check if we are in CQL mode and if we are + * - disable CQL, + * - run the command + * - enable CQL + * If not in CQL mode, just run the command + */ +int dytc_cql_command(int command, int *output) +{ + int err, cmd_err, dummy; + int cur_funcmode; + + /* Determine if we are in CQL mode. This alters the commands we do */ + err = dytc_command(DYTC_CMD_GET, output); + if (err) + return err; + + cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF; + /* Check if we're OK to return immediately */ + if ((command == DYTC_CMD_GET) && (cur_funcmode != DYTC_FUNCTION_CQL)) + return 0; + + if (cur_funcmode == DYTC_FUNCTION_CQL) { + atomic_inc(&dytc_ignore_event); + err = dytc_command(DYTC_DISABLE_CQL, &dummy); + if (err) + return err; + } + + cmd_err = dytc_command(command, output); + /* Check return condition after we've restored CQL state */ + + if (cur_funcmode == DYTC_FUNCTION_CQL) { + err = dytc_command(DYTC_ENABLE_CQL, &dummy); + if (err) + return err; + } + + return cmd_err; +} + +/* + * dytc_profile_set: Function to register with platform_profile + * handler. Sets current platform profile. + */ +int dytc_profile_set(struct platform_profile_handler *pprof, + enum platform_profile_option profile) +{ + int output; + int err; + + if (!dytc_profile_available) + return -ENODEV; + + err = mutex_lock_interruptible(&dytc_mutex); + if (err) + return err; + + if (profile == PLATFORM_PROFILE_BALANCED) { + /* To get back to balanced mode we just issue a reset command */ + err = dytc_command(DYTC_CMD_RESET, &output); + if (err) + goto unlock; + } else { + int perfmode; + + err = convert_profile_to_dytc(profile, &perfmode); + if (err) + goto unlock; + + /* Determine if we are in CQL mode. This alters the commands we do */ + err = dytc_cql_command(DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), &output); + if (err) + goto unlock; + } + /* Success - update current profile */ + dytc_current_profile = profile; +unlock: + mutex_unlock(&dytc_mutex); + return err; +} + +static void dytc_profile_refresh(void) +{ + enum platform_profile_option profile; + int output, err; + int perfmode; + + mutex_lock(&dytc_mutex); + err = dytc_cql_command(DYTC_CMD_GET, &output); + mutex_unlock(&dytc_mutex); + if (err) + return; + + perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF; + convert_dytc_to_profile(perfmode, &profile); + if (profile != dytc_current_profile) { + dytc_current_profile = profile; + platform_profile_notify(); + } +} + +static struct platform_profile_handler dytc_profile = { + .profile_get = dytc_profile_get, + .profile_set = dytc_profile_set, +}; + +static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) +{ + int err, output; + + /* Setup supported modes */ + set_bit(PLATFORM_PROFILE_LOW_POWER, dytc_profile.choices); + set_bit(PLATFORM_PROFILE_BALANCED, dytc_profile.choices); + set_bit(PLATFORM_PROFILE_PERFORMANCE, dytc_profile.choices); + + dytc_profile_available = false; + err = dytc_command(DYTC_CMD_QUERY, &output); + /* + * If support isn't available (ENODEV) then don't return an error + * and don't create the sysfs group + */ + if (err == -ENODEV) + return 0; + /* For all other errors we can flag the failure */ + if (err) + return err; + + /* Check DYTC is enabled and supports mode setting */ + if (output & BIT(DYTC_QUERY_ENABLE_BIT)) { + /* Only DYTC v5.0 and later has this feature. */ + int dytc_version; + + dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; + if (dytc_version >= 5) { + dbg_printk(TPACPI_DBG_INIT, + "DYTC version %d: thermal mode available\n", dytc_version); + /* Create platform_profile structure and register */ + err = platform_profile_register(&dytc_profile); + /* + * If for some reason platform_profiles aren't enabled + * don't quit terminally. + */ + if (err) + return 0; + + dytc_profile_available = true; + /* Ensure initial values are correct */ + dytc_profile_refresh(); + } + } + return 0; +} + +static void dytc_profile_exit(void) +{ + if (dytc_profile_available) { + dytc_profile_available = false; + platform_profile_remove(); + } +} + +static struct ibm_struct dytc_profile_driver_data = { + .name = "dytc-profile", + .exit = dytc_profile_exit, +}; +#endif /* CONFIG_ACPI_PLATFORM_PROFILE */ + /************************************************************************* * Keyboard language interface */ @@ -10204,8 +10474,14 @@ static void tpacpi_driver_event(const unsigned int hkey_event) mutex_unlock(&kbdlight_mutex); } - if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) + if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) { lapsensor_refresh(); +#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE) + /* If we are already accessing DYTC then skip dytc update */ + if (!atomic_add_unless(&dytc_ignore_event, -1, 0)) + dytc_profile_refresh(); +#endif + } } static void hotkey_driver_event(const unsigned int scancode) @@ -10648,6 +10924,12 @@ static struct ibm_init_struct ibms_init[] __initdata = { .init = tpacpi_proxsensor_init, .data = &proxsensor_driver_data, }, +#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE) + { + .init = tpacpi_dytc_profile_init, + .data = &dytc_profile_driver_data, + }, +#endif { .init = tpacpi_kbdlang_init, .data = &kbdlang_driver_data, -- 2.7.4