From c2f58d2457fb08ed045923fc6114c8d1c46f1884 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 7 Apr 2021 12:39:07 +0200 Subject: [PATCH] USB: serial: io_ti: fix TIOCGSERIAL implementation TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing close_delay, but let's report back the default value actually used (0.5 seconds). Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/io_ti.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index e800547..f5aab57 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2437,21 +2437,17 @@ static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned cwait; - cwait = edge_port->port->port.closing_wait; + cwait = port->port.closing_wait; if (cwait != ASYNC_CLOSING_WAIT_NONE) cwait = jiffies_to_msecs(cwait) / 10; ss->type = PORT_16550A; - ss->line = edge_port->port->minor; - ss->port = edge_port->port->port_number; - ss->irq = 0; - ss->xmit_fifo_size = edge_port->port->bulk_out_size; - ss->baud_base = 9600; - ss->close_delay = 5*HZ; + ss->line = port->minor; + ss->close_delay = 50; ss->closing_wait = cwait; + return 0; } -- 2.7.4