From c23ddf8f22fc2c871ce476ff917d1208bbe4f3de Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 3 Sep 2009 06:16:25 +0000 Subject: [PATCH] sky2: only enable Vaux if capable of wakeup While perusing vendor driver, I saw that it did not enable the Vaux power unless device was able to wake from lan for D3cold. This might help for Rene's power issue. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d1f3b46..bab591b4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -272,8 +272,9 @@ static void sky2_power_aux(struct sky2_hw *hw) Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); - /* switch power to VAUX */ - if (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) + /* switch power to VAUX if supported and PME from D3cold */ + if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) && + pci_pme_capable(hw->pdev, PCI_D3cold)) sky2_write8(hw, B0_POWER_CTRL, (PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF)); -- 2.7.4