From c0adba572108677c23d6aa58173f9869ea3a5819 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 7 Jan 2020 09:02:52 +0100
Subject: [PATCH] arm64: zynqmp: Add support for debug uart also for U-Boot
 proper

board_early_init_f() is the right location where debug uart can be
configurated (after MIO initialization).
The patch is taking this call from SPL to also make it available for U-Boot
proper.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynqmp/spl.c   |  6 ------
 board/xilinx/zynqmp/zynqmp.c | 15 ++++++++++++---
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c
index b383018..c53945e 100644
--- a/arch/arm/mach-zynqmp/spl.c
+++ b/arch/arm/mach-zynqmp/spl.c
@@ -6,7 +6,6 @@
  */
 
 #include <common.h>
-#include <debug_uart.h>
 #include <init.h>
 #include <spl.h>
 
@@ -21,11 +20,6 @@ void board_init_f(ulong dummy)
 	board_early_init_f();
 	board_early_init_r();
 
-#ifdef CONFIG_DEBUG_UART
-	/* Uart debug for sure */
-	debug_uart_init();
-	puts("Debug uart enabled\n"); /* or printch() */
-#endif
 	/* Delay is required for clocks to be propagated */
 	udelay(1000000);
 }
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index c6c55ca..04fd3bd 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <cpu_func.h>
+#include <debug_uart.h>
 #include <env.h>
 #include <init.h>
 #include <sata.h>
@@ -319,13 +320,21 @@ static char *zynqmp_get_silicon_idcode_name(void)
 
 int board_early_init_f(void)
 {
-	int ret = 0;
-
 #if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
+	int ret;
+
 	ret = psu_init();
+	if (ret)
+		return ret;
 #endif
 
-	return ret;
+#ifdef CONFIG_DEBUG_UART
+	/* Uart debug for sure */
+	debug_uart_init();
+	puts("Debug uart enabled\n"); /* or printch() */
+#endif
+
+	return 0;
 }
 
 static int multi_boot(void)
-- 
2.7.4