From c00a0991d14dce8d714becc49ec8ae5db9c8ac98 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 1 May 2012 17:12:54 -0700 Subject: [PATCH] mtd: nand: remove autoincrement 'sndcmd' code The NAND_NO_AUTOINCR option is always set, so we will kill the option and make "no autoincrement" the default behavior for nand_base.c. Thus, we should remove the code which decides whether or not to send the NAND_CMD_READ0 command. Instead, we unconditionally send the command. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 43 ++++++------------------------------------- 1 file changed, 6 insertions(+), 37 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 640f1f8..6246b0f 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1477,8 +1477,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, int chipnr, page, realpage, col, bytes, aligned; struct nand_chip *chip = mtd->priv; struct mtd_ecc_stats stats; - int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; - int sndcmd = 1; int ret = 0; uint32_t readlen = ops->len; uint32_t oobreadlen = ops->ooblen; @@ -1509,10 +1507,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, if (realpage != chip->pagebuf || oob) { bufpoi = aligned ? buf : chip->buffers->databuf; - if (likely(sndcmd)) { - chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); - sndcmd = 0; - } + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); /* * Now read the page into the buffer. Absent an error, @@ -1564,13 +1559,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, } if (!(chip->options & NAND_NO_READRDY)) { - /* - * Apply delay or wait for ready/busy pin. Do - * this before the AUTOINCR check, so no - * problems arise if a chip which does auto - * increment is marked as NOAUTOINCR by the - * board driver. - */ + /* Apply delay or wait for ready/busy pin */ if (!chip->dev_ready) udelay(chip->chip_delay); else @@ -1600,13 +1589,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); } - - /* - * Check, if the chip supports auto page increment or if we - * have hit a block boundary. - */ - if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) - sndcmd = 1; } ops->retlen = ops->len - (size_t) readlen; @@ -1800,10 +1782,9 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd, static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { - int page, realpage, chipnr, sndcmd = 1; + int page, realpage, chipnr; struct nand_chip *chip = mtd->priv; struct mtd_ecc_stats stats; - int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; int readlen = ops->ooblen; int len; uint8_t *buf = ops->oobbuf; @@ -1842,20 +1823,15 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, while (1) { if (ops->mode == MTD_OPS_RAW) - sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd); + chip->ecc.read_oob_raw(mtd, chip, page, 1); else - sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd); + chip->ecc.read_oob(mtd, chip, page, 1); len = min(len, readlen); buf = nand_transfer_oob(chip, buf, ops, len); if (!(chip->options & NAND_NO_READRDY)) { - /* - * Apply delay or wait for ready/busy pin. Do this - * before the AUTOINCR check, so no problems arise if a - * chip which does auto increment is marked as - * NOAUTOINCR by the board driver. - */ + /* Apply delay or wait for ready/busy pin */ if (!chip->dev_ready) udelay(chip->chip_delay); else @@ -1876,13 +1852,6 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); } - - /* - * Check, if the chip supports auto page increment or if we - * have hit a block boundary. - */ - if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) - sndcmd = 1; } ops->oobretlen = ops->ooblen; -- 2.7.4