From bf9c71417f721abf6853d0ae56be8cf228f92888 Mon Sep 17 00:00:00 2001 From: Catherine Sullivan Date: Wed, 4 Jun 2014 08:45:28 +0000 Subject: [PATCH] i40e: Implement set_settings for ethtool Implement set_settings for ethtool in i40e. Change-ID: Ie3c3fe18e8ff86c3f25b842844b3d9aabc9bba57 Signed-off-by: Catherine Sullivan Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 158 +++++++++++++++++++++++++ 1 file changed, 158 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index fc86761..3abd3cb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -412,6 +412,163 @@ no_valid_phy_type: return 0; } +/** + * i40e_set_settings - Set Speed and Duplex + * @netdev: network interface device structure + * @ecmd: ethtool command + * + * Set speed/duplex per media_types advertised/forced + **/ +static int i40e_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_aq_get_phy_abilities_resp abilities; + struct i40e_aq_set_phy_config config; + struct i40e_pf *pf = np->vsi->back; + struct i40e_vsi *vsi = np->vsi; + struct i40e_hw *hw = &pf->hw; + struct ethtool_cmd safe_ecmd; + i40e_status status = 0; + bool change = false; + int err = 0; + u8 autoneg; + u32 advertise; + + if (vsi != pf->vsi[pf->lan_vsi]) + return -EOPNOTSUPP; + + if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET && + hw->phy.media_type != I40E_MEDIA_TYPE_FIBER && + hw->phy.media_type != I40E_MEDIA_TYPE_BACKPLANE) + return -EOPNOTSUPP; + + /* get our own copy of the bits to check against */ + memset(&safe_ecmd, 0, sizeof(struct ethtool_cmd)); + i40e_get_settings(netdev, &safe_ecmd); + + /* save autoneg and speed out of ecmd */ + autoneg = ecmd->autoneg; + advertise = ecmd->advertising; + + /* set autoneg and speed back to what they currently are */ + ecmd->autoneg = safe_ecmd.autoneg; + ecmd->advertising = safe_ecmd.advertising; + + ecmd->cmd = safe_ecmd.cmd; + /* If ecmd and safe_ecmd are not the same now, then they are + * trying to set something that we do not support + */ + if (memcmp(ecmd, &safe_ecmd, sizeof(struct ethtool_cmd))) + return -EOPNOTSUPP; + + while (test_bit(__I40E_CONFIG_BUSY, &vsi->state)) + usleep_range(1000, 2000); + + /* Get the current phy config */ + status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, + NULL); + if (status) + return -EAGAIN; + + /* Copy link_speed and abilities to config in case they are not + * set below + */ + memset(&config, 0, sizeof(struct i40e_aq_set_phy_config)); + config.link_speed = abilities.link_speed; + config.abilities = abilities.abilities; + + /* Check autoneg */ + if (autoneg == AUTONEG_ENABLE) { + /* If autoneg is not supported, return error */ + if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) { + netdev_info(netdev, "Autoneg not supported on this phy\n"); + return -EINVAL; + } + /* If autoneg was not already enabled */ + if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) { + config.abilities = abilities.abilities | + I40E_AQ_PHY_ENABLE_AN; + change = true; + } + } else { + /* If autoneg is supported 10GBASE_T is the only phy that + * can disable it, so otherwise return error + */ + if (safe_ecmd.supported & SUPPORTED_Autoneg && + hw->phy.link_info.phy_type != I40E_PHY_TYPE_10GBASE_T) { + netdev_info(netdev, "Autoneg cannot be disabled on this phy\n"); + return -EINVAL; + } + /* If autoneg is currently enabled */ + if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) { + config.abilities = abilities.abilities | + ~I40E_AQ_PHY_ENABLE_AN; + change = true; + } + } + + if (advertise & ~safe_ecmd.supported) + return -EINVAL; + + if (advertise & ADVERTISED_100baseT_Full) + if (!(abilities.link_speed & I40E_LINK_SPEED_100MB)) { + config.link_speed |= I40E_LINK_SPEED_100MB; + change = true; + } + if (advertise & ADVERTISED_1000baseT_Full || + advertise & ADVERTISED_1000baseKX_Full) + if (!(abilities.link_speed & I40E_LINK_SPEED_1GB)) { + config.link_speed |= I40E_LINK_SPEED_1GB; + change = true; + } + if (advertise & ADVERTISED_10000baseT_Full || + advertise & ADVERTISED_10000baseKX4_Full || + advertise & ADVERTISED_10000baseKR_Full) + if (!(abilities.link_speed & I40E_LINK_SPEED_10GB)) { + config.link_speed |= I40E_LINK_SPEED_10GB; + change = true; + } + if (advertise & ADVERTISED_40000baseKR4_Full || + advertise & ADVERTISED_40000baseCR4_Full || + advertise & ADVERTISED_40000baseSR4_Full || + advertise & ADVERTISED_40000baseLR4_Full) + if (!(abilities.link_speed & I40E_LINK_SPEED_40GB)) { + config.link_speed |= I40E_LINK_SPEED_40GB; + change = true; + } + + if (change) { + /* copy over the rest of the abilities */ + config.phy_type = abilities.phy_type; + config.eee_capability = abilities.eee_capability; + config.eeer = abilities.eeer_val; + config.low_power_ctrl = abilities.d3_lpan; + + /* If link is up set link and an so changes take effect */ + if (hw->phy.link_info.link_info & I40E_AQ_LINK_UP) + config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK; + + /* make the aq call */ + status = i40e_aq_set_phy_config(hw, &config, NULL); + if (status) { + netdev_info(netdev, "Set phy config failed with error %d.\n", + status); + return -EAGAIN; + } + + status = i40e_update_link_info(hw, true); + if (status) + netdev_info(netdev, "Updating link info failed with error %d\n", + status); + + } else { + netdev_info(netdev, "Nothing changed, exiting without setting anything.\n"); + } + + return err; +} + static int i40e_nway_reset(struct net_device *netdev) { /* restart autonegotiation */ @@ -1929,6 +2086,7 @@ static int i40e_set_channels(struct net_device *dev, static const struct ethtool_ops i40e_ethtool_ops = { .get_settings = i40e_get_settings, + .set_settings = i40e_set_settings, .get_drvinfo = i40e_get_drvinfo, .get_regs_len = i40e_get_regs_len, .get_regs = i40e_get_regs, -- 2.7.4