From beee8072c39cee74d4ff6e3b4ca8942f9966ed2e Mon Sep 17 00:00:00 2001 From: Yanir Lubetkin Date: Wed, 10 Jun 2015 01:15:51 +0300 Subject: [PATCH] e1000e: synchronization of MAC-PHY interface only on non- ME systems On power up, the MAC - PHY interface needs to be set to PCIe, even if cable is disconnected. In ME systems, the ME handles this on exit from Sx state. In non-ME, the driver handles it. Added a check for non-ME system to the driver code that handles that. Signed-off-by: Yanir Lubetkin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index b074b9a..c742a4f 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -237,17 +237,19 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) if (ret_val) return false; out: - if ((hw->mac.type == e1000_pch_lpt) || - (hw->mac.type == e1000_pch_spt)) { - /* Unforce SMBus mode in PHY */ - e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); - phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; - e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); + if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { + /* Only unforce SMBus if ME is not active */ + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + /* Unforce SMBus mode in PHY */ + e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); - /* Unforce SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } } return true; -- 2.7.4