From be90974c4375cec40a91f389dfba244c20b08ef7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 23 Sep 2015 16:13:10 +0200 Subject: [PATCH] sunxi: mmc: Fix clk-delay settings In recent allwinner kernel sources the mmc/sdio clk-delay settings have been slightly tweaked, and for sun9i they are completely different then what we are using. This commit brings us in sync with what allwinner does, fixing problems accessing sdcards on some A33 devices (and likely others). For pre sun9i hardware this makes the following changes: -At 400Khz change the sample delay from 7 to 0 (first introduced in A31 sdk) -At 50 Mhz change the sample delay from 5 to 4 (first introduced in A23 sdk) -Above 50 MHz change the out delay from 2 to 1 (first introduced in A20 sdk) Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- drivers/mmc/sunxi_mmc.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 25f18ad..e717c44 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -120,17 +120,27 @@ static int mmc_set_mod_clk(struct sunxi_mmc_host *mmchost, unsigned int hz) /* determine delays */ if (hz <= 400000) { oclk_dly = 0; - sclk_dly = 7; + sclk_dly = 0; } else if (hz <= 25000000) { oclk_dly = 0; sclk_dly = 5; +#ifdef CONFIG_MACH_SUN9I } else if (hz <= 50000000) { - oclk_dly = 3; - sclk_dly = 5; + oclk_dly = 5; + sclk_dly = 4; } else { /* hz > 50000000 */ oclk_dly = 2; sclk_dly = 4; +#else + } else if (hz <= 50000000) { + oclk_dly = 3; + sclk_dly = 4; + } else { + /* hz > 50000000 */ + oclk_dly = 1; + sclk_dly = 4; +#endif } writel(CCM_MMC_CTRL_ENABLE | pll | CCM_MMC_CTRL_SCLK_DLY(sclk_dly) | -- 2.7.4