From be8d53f08c1fa1a2918a43ca418d307dddcc95ae Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 16 Apr 2014 11:34:41 +0200 Subject: [PATCH] watchdog: ath79_wdt: avoid spurious restarts on AR934x commit 23afeb613ec0e10aecfae7838a14d485db62ac52 upstream. On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by: Gabor Juhos Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman --- drivers/watchdog/ath79_wdt.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c index 37cb09b..c97a47c 100644 --- a/drivers/watchdog/ath79_wdt.c +++ b/drivers/watchdog/ath79_wdt.c @@ -20,6 +20,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +#include #include #include #include @@ -91,6 +92,15 @@ static inline void ath79_wdt_keepalive(void) static inline void ath79_wdt_enable(void) { ath79_wdt_keepalive(); + + /* + * Updating the TIMER register requires a few microseconds + * on the AR934x SoCs at least. Use a small delay to ensure + * that the TIMER register is updated within the hardware + * before enabling the watchdog. + */ + udelay(2); + ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_FCR); /* flush write */ ath79_wdt_rr(WDOG_REG_CTRL); -- 2.7.4