From bd1a665a01b4d65fd8dc6fece4b376fa5c8c55bb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 28 Sep 2022 18:15:55 -0700 Subject: [PATCH] arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 According to s3fwrn5 driver code the "enable" GPIO line is driven "high" when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low" when chip is in use. s3fwrn5_phy_power_ctrl(): ... gpio_set_value(phy->gpio_en, 1); ... if (mode != S3FWRN5_MODE_COLD) { msleep(S3FWRN5_EN_WAIT_TIME); gpio_set_value(phy->gpio_en, 0); msleep(S3FWRN5_EN_WAIT_TIME); } Therefore the line described by "en-gpios" property should be annotated as "active low". The wakeup gpio appears to have correct polarity (active high). Signed-off-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20220929011557.4165216-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 91c9bd1..bde6a6bb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -795,7 +795,7 @@ reg = <0x27>; interrupt-parent = <&gpa1>; interrupts = <3 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>; wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; }; }; -- 2.7.4