From bc23aa949aeba0b7a1341f24a1841eb175e01919 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Wed, 29 Jan 2020 16:30:07 +0200 Subject: [PATCH] igc: Add pcie error handler support Add pcie error detection, slot reset and resume capability Signed-off-by: Sasha Neftin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igc/igc_main.c | 103 ++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index b805323e..e982b5f 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -5076,6 +5076,108 @@ static void igc_shutdown(struct pci_dev *pdev) } } +/** + * igc_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current PCI connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + **/ +static pci_ers_result_t igc_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igc_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + igc_down(adapter); + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * igc_io_slot_reset - called after the PCI bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the igc_resume routine. + **/ +static pci_ers_result_t igc_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igc_adapter *adapter = netdev_priv(netdev); + struct igc_hw *hw = &adapter->hw; + pci_ers_result_t result; + + if (pci_enable_device_mem(pdev)) { + dev_err(&pdev->dev, + "Could not re-enable PCI device after reset.\n"); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + /* In case of PCI error, adapter loses its HW address + * so we should re-assign it here. + */ + hw->hw_addr = adapter->io_addr; + + igc_reset(adapter); + wr32(IGC_WUS, ~0); + result = PCI_ERS_RESULT_RECOVERED; + } + + return result; +} + +/** + * igc_io_resume - called when traffic can start to flow again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the igc_resume routine. + */ +static void igc_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igc_adapter *adapter = netdev_priv(netdev); + + rtnl_lock(); + if (netif_running(netdev)) { + if (igc_open(netdev)) { + dev_err(&pdev->dev, "igc_open failed after reset\n"); + return; + } + } + + netif_device_attach(netdev); + + /* let the f/w know that the h/w is now under the control of the + * driver. + */ + igc_get_hw_control(adapter); + rtnl_unlock(); +} + +static const struct pci_error_handlers igc_err_handler = { + .error_detected = igc_io_error_detected, + .slot_reset = igc_io_slot_reset, + .resume = igc_io_resume, +}; + #ifdef CONFIG_PM static const struct dev_pm_ops igc_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(igc_suspend, igc_resume) @@ -5093,6 +5195,7 @@ static struct pci_driver igc_driver = { .driver.pm = &igc_pm_ops, #endif .shutdown = igc_shutdown, + .err_handler = &igc_err_handler, }; /** -- 2.7.4