From bbeb3f4c55f666df7bcd2655b303dfb8c4d1a119 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 27 Sep 2005 13:51:59 +1000 Subject: [PATCH] powerpc: clean up after powermac build merge Complete moving arch/ppc64/kernel/mpic.h, include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h and include/asm-ppc64/kprobes.h Add arch/powerpc/platforms/Makefile and use it from arch/powerpc/Makefile Introduce OLDARCH temporarily so we can point back to the originating architecture Signed-off-by: Stephen Rothwell --- arch/powerpc/Makefile | 31 +- arch/powerpc/platforms/Makefile | 4 + arch/powerpc/platforms/embedded6xx/Kconfig | 8 - arch/ppc64/kernel/kprobes.c | 1 - arch/ppc64/kernel/maple_setup.c | 3 +- arch/ppc64/kernel/mpic.c | 3 +- arch/ppc64/kernel/mpic.h | 273 ------------------ arch/ppc64/kernel/pSeries_setup.c | 2 +- arch/ppc64/kernel/pSeries_smp.c | 2 +- arch/ppc64/kernel/pmac_setup.c | 2 +- arch/ppc64/kernel/pmac_smp.c | 3 +- arch/ppc64/kernel/rtas_pci.c | 2 +- arch/ppc64/kernel/smp.c | 3 +- arch/ppc64/kernel/traps.c | 4 +- include/asm-powerpc/kdebug.h | 6 +- include/asm-powerpc/kprobes.h | 7 +- include/asm-powerpc/mpic.h | 5 + include/asm-powerpc/reg.h | 6 +- include/asm-powerpc/system.h | 6 +- include/asm-ppc/reg.h | 440 ----------------------------- include/asm-ppc64/kdebug.h | 43 --- include/asm-ppc64/kprobes.h | 67 ----- 22 files changed, 41 insertions(+), 880 deletions(-) create mode 100644 arch/powerpc/platforms/Makefile delete mode 100644 arch/ppc64/kernel/mpic.h delete mode 100644 include/asm-ppc/reg.h delete mode 100644 include/asm-ppc64/kdebug.h delete mode 100644 include/asm-ppc64/kprobes.h diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 8a65e11..d948781 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -18,6 +18,7 @@ KERNELLOAD := $(CONFIG_KERNEL_START) HAS_BIARCH := $(call cc-option-yn, -m32) ifeq ($(CONFIG_PPC64),y) +OLDARCH := ppc64 SZ := 64 # Set default 32 bits cross compilers for vdso and boot wrapper @@ -46,6 +47,7 @@ NM := $(NM) --synthetic endif else +OLDARCH := ppc SZ := 32 endif @@ -61,11 +63,9 @@ LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -e $(KERNELLOAD) CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include AFLAGS += -Iarch/$(ARCH) CFLAGS += -Iarch/$(ARCH) -msoft-float -pipe -ifeq ($(CONFIG_PPC64),y) -CFLAGS += -mminimal-toc -mtraceback=none -mcall-aixdesc -else -CFLAGS += -ffixed-r2 -mmultiple -endif +CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc +CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple +CFLAGS += $(CFLAGS-y) CPP = $(CC) -E $(CFLAGS) # Temporary hack until we have migrated to asm-powerpc LINUXINCLUDE += -Iarch/$(ARCH)/include @@ -126,16 +126,12 @@ head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o endif core-y += arch/powerpc/kernel/ \ + arch/$(OLDARCH)/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ - arch/powerpc/sysdev/ -core-$(CONFIG_PPC32) += arch/ppc/kernel/ \ - arch/ppc/syslib/ -core-$(CONFIG_PPC64) += arch/ppc64/kernel/ -core-$(CONFIG_PPC_PMAC) += arch/powerpc/platforms/powermac/ -core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ -core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ -core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ + arch/powerpc/sysdev/ \ + arch/powerpc/platforms/ +core-$(CONFIG_PPC32) += arch/ppc/syslib/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ @@ -182,17 +178,10 @@ archclean: archprepare: checkbin # Temporary hack until we have migrated to asm-powerpc -ifeq ($(CONFIG_PPC64),y) include/asm: arch/$(ARCH)/include/asm arch/$(ARCH)/include/asm: $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-ppc64 arch/$(ARCH)/include/asm -else -include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: - $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-ppc arch/$(ARCH)/include/asm -endif + $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm # Use the file '.tmp_gas_check' for binutils tests, as gas won't output # to stdout and these checks are run even on install targets. diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile new file mode 100644 index 0000000..dbc0937 --- /dev/null +++ b/arch/powerpc/platforms/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_PPC_PMAC) += powermac/ +obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_83xx) += 83xx/ +obj-$(CONFIG_85xx) += 85xx/ diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 4f35514..2d755b7 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -2,14 +2,6 @@ choice prompt "Machine Type" depends on EMBEDDED6xx -config APUS - bool "Amiga-APUS" - depends on BROKEN - help - Select APUS if configuring for a PowerUP Amiga. - More information is available at: - . - config KATANA bool "Artesyn-Katana" help diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 7e80d49..abb90e6 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -395,7 +395,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, if (post_kprobe_handler(args->regs)) ret = NOTIFY_STOP; break; - case DIE_GPF: case DIE_PAGE_FAULT: if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/ppc64/kernel/maple_setup.c index fc05674..2a7fae0 100644 --- a/arch/ppc64/kernel/maple_setup.c +++ b/arch/ppc64/kernel/maple_setup.c @@ -59,8 +59,7 @@ #include #include #include - -#include "mpic.h" +#include #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c index cc262a0..ec22321 100644 --- a/arch/ppc64/kernel/mpic.c +++ b/arch/ppc64/kernel/mpic.c @@ -31,8 +31,7 @@ #include #include #include - -#include "mpic.h" +#include #ifdef DEBUG #define DBG(fmt...) printk(fmt) diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h deleted file mode 100644 index ca78a7f..0000000 --- a/arch/ppc64/kernel/mpic.h +++ /dev/null @@ -1,273 +0,0 @@ -#include - -/* - * Global registers - */ - -#define MPIC_GREG_BASE 0x01000 - -#define MPIC_GREG_FEATURE_0 0x00000 -#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 -#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 -#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 -#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 -#define MPIC_GREG_FEATURE_VERSION_MASK 0xff -#define MPIC_GREG_FEATURE_1 0x00010 -#define MPIC_GREG_GLOBAL_CONF_0 0x00020 -#define MPIC_GREG_GCONF_RESET 0x80000000 -#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 -#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff -#define MPIC_GREG_GLOBAL_CONF_1 0x00030 -#define MPIC_GREG_VENDOR_0 0x00040 -#define MPIC_GREG_VENDOR_1 0x00050 -#define MPIC_GREG_VENDOR_2 0x00060 -#define MPIC_GREG_VENDOR_3 0x00070 -#define MPIC_GREG_VENDOR_ID 0x00080 -#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 -#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 -#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff -#define MPIC_GREG_PROCESSOR_INIT 0x00090 -#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 -#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 -#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 -#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 -#define MPIC_GREG_SPURIOUS 0x000e0 -#define MPIC_GREG_TIMER_FREQ 0x000f0 - -/* - * - * Timer registers - */ -#define MPIC_TIMER_BASE 0x01100 -#define MPIC_TIMER_STRIDE 0x40 - -#define MPIC_TIMER_CURRENT_CNT 0x00000 -#define MPIC_TIMER_BASE_CNT 0x00010 -#define MPIC_TIMER_VECTOR_PRI 0x00020 -#define MPIC_TIMER_DESTINATION 0x00030 - -/* - * Per-Processor registers - */ - -#define MPIC_CPU_THISBASE 0x00000 -#define MPIC_CPU_BASE 0x20000 -#define MPIC_CPU_STRIDE 0x01000 - -#define MPIC_CPU_IPI_DISPATCH_0 0x00040 -#define MPIC_CPU_IPI_DISPATCH_1 0x00050 -#define MPIC_CPU_IPI_DISPATCH_2 0x00060 -#define MPIC_CPU_IPI_DISPATCH_3 0x00070 -#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 -#define MPIC_CPU_TASKPRI_MASK 0x0000000f -#define MPIC_CPU_WHOAMI 0x00090 -#define MPIC_CPU_WHOAMI_MASK 0x0000001f -#define MPIC_CPU_INTACK 0x000a0 -#define MPIC_CPU_EOI 0x000b0 - -/* - * Per-source registers - */ - -#define MPIC_IRQ_BASE 0x10000 -#define MPIC_IRQ_STRIDE 0x00020 -#define MPIC_IRQ_VECTOR_PRI 0x00000 -#define MPIC_VECPRI_MASK 0x80000000 -#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ -#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 -#define MPIC_VECPRI_PRIORITY_SHIFT 16 -#define MPIC_VECPRI_VECTOR_MASK 0x000007ff -#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 -#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define MPIC_VECPRI_POLARITY_MASK 0x00800000 -#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 -#define MPIC_VECPRI_SENSE_EDGE 0x00000000 -#define MPIC_VECPRI_SENSE_MASK 0x00400000 -#define MPIC_IRQ_DESTINATION 0x00010 - -#define MPIC_MAX_IRQ_SOURCES 2048 -#define MPIC_MAX_CPUS 32 -#define MPIC_MAX_ISU 32 - -/* - * Special vector numbers (internal use only) - */ -#define MPIC_VEC_SPURRIOUS 255 -#define MPIC_VEC_IPI_3 254 -#define MPIC_VEC_IPI_2 253 -#define MPIC_VEC_IPI_1 252 -#define MPIC_VEC_IPI_0 251 - -/* unused */ -#define MPIC_VEC_TIMER_3 250 -#define MPIC_VEC_TIMER_2 249 -#define MPIC_VEC_TIMER_1 248 -#define MPIC_VEC_TIMER_0 247 - -/* Type definition of the cascade handler */ -typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data); - -#ifdef CONFIG_MPIC_BROKEN_U3 -/* Fixup table entry */ -struct mpic_irq_fixup -{ - u8 __iomem *base; - unsigned int irq; -}; -#endif /* CONFIG_MPIC_BROKEN_U3 */ - - -/* The instance data of a given MPIC */ -struct mpic -{ - /* The "linux" controller struct */ - hw_irq_controller hc_irq; -#ifdef CONFIG_SMP - hw_irq_controller hc_ipi; -#endif - const char *name; - /* Flags */ - unsigned int flags; - /* How many irq sources in a given ISU */ - unsigned int isu_size; - unsigned int isu_shift; - unsigned int isu_mask; - /* Offset of irq vector numbers */ - unsigned int irq_offset; - unsigned int irq_count; - /* Offset of ipi vector numbers */ - unsigned int ipi_offset; - /* Number of sources */ - unsigned int num_sources; - /* Number of CPUs */ - unsigned int num_cpus; - /* cascade handler */ - mpic_cascade_t cascade; - void *cascade_data; - unsigned int cascade_vec; - /* senses array */ - unsigned char *senses; - unsigned int senses_count; - -#ifdef CONFIG_MPIC_BROKEN_U3 - /* The fixup table */ - struct mpic_irq_fixup *fixups; - spinlock_t fixup_lock; -#endif - - /* The various ioremap'ed bases */ - volatile u32 __iomem *gregs; - volatile u32 __iomem *tmregs; - volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS]; - volatile u32 __iomem *isus[MPIC_MAX_ISU]; - - /* link */ - struct mpic *next; -}; - -/* This is the primary controller, only that one has IPIs and - * has afinity control. A non-primary MPIC always uses CPU0 - * registers only - */ -#define MPIC_PRIMARY 0x00000001 -/* Set this for a big-endian MPIC */ -#define MPIC_BIG_ENDIAN 0x00000002 -/* Broken U3 MPIC */ -#define MPIC_BROKEN_U3 0x00000004 -/* Broken IPI registers (autodetected) */ -#define MPIC_BROKEN_IPI 0x00000008 -/* MPIC wants a reset */ -#define MPIC_WANTS_RESET 0x00000010 - -/* Allocate the controller structure and setup the linux irq descs - * for the range if interrupts passed in. No HW initialization is - * actually performed. - * - * @phys_addr: physial base address of the MPIC - * @flags: flags, see constants above - * @isu_size: number of interrupts in an ISU. Use 0 to use a - * standard ISU-less setup (aka powermac) - * @irq_offset: first irq number to assign to this mpic - * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 - * to match the number of sources - * @ipi_offset: first irq number to assign to this mpic IPI sources, - * used only on primary mpic - * @senses: array of sense values - * @senses_num: number of entries in the array - * - * Note about the sense array. If none is passed, all interrupts are - * setup to be level negative unless MPIC_BROKEN_U3 is set in which - * case they are edge positive (and the array is ignored anyway). - * The values in the array start at the first source of the MPIC, - * that is senses[0] correspond to linux irq "irq_offset". - */ -extern struct mpic *mpic_alloc(unsigned long phys_addr, - unsigned int flags, - unsigned int isu_size, - unsigned int irq_offset, - unsigned int irq_count, - unsigned int ipi_offset, - unsigned char *senses, - unsigned int senses_num, - const char *name); - -/* Assign ISUs, to call before mpic_init() - * - * @mpic: controller structure as returned by mpic_alloc() - * @isu_num: ISU number - * @phys_addr: physical address of the ISU - */ -extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - unsigned long phys_addr); - -/* Initialize the controller. After this has been called, none of the above - * should be called again for this mpic - */ -extern void mpic_init(struct mpic *mpic); - -/* Setup a cascade. Currently, only one cascade is supported this - * way, though you can always do a normal request_irq() and add - * other cascades this way. You should call this _after_ having - * added all the ISUs - * - * @irq_no: "linux" irq number of the cascade (that is offset'ed vector) - * @handler: cascade handler function - */ -extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder, - void *data); - -/* - * All of the following functions must only be used after the - * ISUs have been assigned and the controller fully initialized - * with mpic_init() - */ - - -/* Change/Read the priority of an interrupt. Default is 8 for irqs and - * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the - * IPI number is then the offset'ed (linux irq number mapped to the IPI) - */ -extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); -extern unsigned int mpic_irq_get_priority(unsigned int irq); - -/* Setup a non-boot CPU */ -extern void mpic_setup_this_cpu(void); - -/* Clean up for kexec (or cpu offline or ...) */ -extern void mpic_teardown_this_cpu(int secondary); - -/* Request IPIs on primary mpic */ -extern void mpic_request_ipis(void); - -/* Send an IPI (non offseted number 0..3) */ -extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); - -/* Fetch interrupt from a given mpic */ -extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); -/* This one gets to the primary mpic */ -extern int mpic_get_irq(struct pt_regs *regs); - -/* global mpic for pSeries */ -extern struct mpic *pSeries_mpic; diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index 3009701..b9bcff2 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -62,9 +62,9 @@ #include #include #include +#include #include "i8259.h" -#include "mpic.h" #include "pci.h" #ifdef DEBUG diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index d2c7e2c..5d1ed85 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -46,8 +46,8 @@ #include #include #include +#include -#include "mpic.h" #include "bpa_iic.h" #ifdef DEBUG diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c index bb0c3bf..497c3cd9 100644 --- a/arch/ppc64/kernel/pmac_setup.c +++ b/arch/ppc64/kernel/pmac_setup.c @@ -72,9 +72,9 @@ #include #include #include +#include #include "pmac.h" -#include "mpic.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c index 9fd23ea..3a1683f 100644 --- a/arch/ppc64/kernel/pmac_smp.c +++ b/arch/ppc64/kernel/pmac_smp.c @@ -51,8 +51,7 @@ #include #include #include - -#include "mpic.h" +#include #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c index 4a9719b..4d920dd 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/ppc64/kernel/rtas_pci.c @@ -38,8 +38,8 @@ #include #include #include +#include -#include "mpic.h" #include "pci.h" /* RTAS tokens */ diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 793b562..6f4f3da 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -45,8 +45,7 @@ #include #include #include - -#include "mpic.h" +#include #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c index 5c4647b..a728c9f 100644 --- a/arch/ppc64/kernel/traps.c +++ b/arch/ppc64/kernel/traps.c @@ -62,7 +62,7 @@ EXPORT_SYMBOL(__debugger_dabr_match); EXPORT_SYMBOL(__debugger_fault_handler); #endif -struct notifier_block *ppc64_die_chain; +struct notifier_block *powerpc_die_chain; static DEFINE_SPINLOCK(die_notifier_lock); int register_die_notifier(struct notifier_block *nb) @@ -71,7 +71,7 @@ int register_die_notifier(struct notifier_block *nb) unsigned long flags; spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&ppc64_die_chain, nb); + err = notifier_chain_register(&powerpc_die_chain, nb); spin_unlock_irqrestore(&die_notifier_lock, flags); return err; } diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h index 7c55abf..9dcbac67 100644 --- a/include/asm-powerpc/kdebug.h +++ b/include/asm-powerpc/kdebug.h @@ -1,5 +1,5 @@ -#ifndef _POWERPC_KDEBUG_H -#define _POWERPC_KDEBUG_H 1 +#ifndef _ASM_POWERPC_KDEBUG_H +#define _ASM_POWERPC_KDEBUG_H /* nearly identical to x86_64/i386 code */ @@ -39,4 +39,4 @@ static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,lon return notifier_call_chain(&powerpc_die_chain, val, &args); } -#endif +#endif /* _ASM_POWERPC_KDEBUG_H */ diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h index d9129d2..b2f09f1 100644 --- a/include/asm-powerpc/kprobes.h +++ b/include/asm-powerpc/kprobes.h @@ -1,8 +1,7 @@ -#ifndef _ASM_KPROBES_H -#define _ASM_KPROBES_H +#ifndef _ASM_POWERPC_KPROBES_H +#define _ASM_POWERPC_KPROBES_H /* * Kernel Probes (KProbes) - * include/asm-ppc64/kprobes.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -64,4 +63,4 @@ static inline int kprobe_exceptions_notify(struct notifier_block *self, return 0; } #endif -#endif /* _ASM_KPROBES_H */ +#endif /* _ASM_POWERPC_KPROBES_H */ diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index f1e24f4..6b558ae 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -1,3 +1,6 @@ +#ifndef _ASM_POWERPC_MPIC_H +#define _ASM_POWERPC_MPIC_H + #include /* @@ -277,3 +280,5 @@ extern int mpic_get_irq(struct pt_regs *regs); /* global mpic for pSeries */ extern struct mpic *pSeries_mpic; + +#endif /* _ASM_POWERPC_MPIC_H */ diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index f97a5f1..1402a2d 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -6,9 +6,9 @@ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. */ +#ifndef _ASM_POWERPC_REGS_H +#define _ASM_POWERPC_REGS_H #ifdef __KERNEL__ -#ifndef __ASM_PPC_REGS_H__ -#define __ASM_PPC_REGS_H__ #include @@ -442,5 +442,5 @@ #define proc_trap() asm volatile("trap") #endif /* __ASSEMBLY__ */ -#endif /* __ASM_PPC_REGS_H__ */ #endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_REGS_H */ diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index be542ef..1b64879 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -1,8 +1,8 @@ /* * Copyright (C) 1999 Cort Dougan */ -#ifndef __PPC_SYSTEM_H -#define __PPC_SYSTEM_H +#ifndef _ASM_POWERPC_SYSTEM_H +#define _ASM_POWERPC_SYSTEM_H #include #include @@ -347,4 +347,4 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, #define arch_align_stack(x) (x) #endif /* __KERNEL__ */ -#endif /* __PPC_SYSTEM_H */ +#endif /* _ASM_POWERPC_SYSTEM_H */ diff --git a/include/asm-ppc/reg.h b/include/asm-ppc/reg.h deleted file mode 100644 index 73c33e3..0000000 --- a/include/asm-ppc/reg.h +++ /dev/null @@ -1,440 +0,0 @@ -/* - * Contains the definition of registers common to all PowerPC variants. - * If a register definition has been changed in a different PowerPC - * variant, we will case it in #ifndef XXX ... #endif, and have the - * number used in the Programming Environments Manual For 32-Bit - * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_PPC_REGS_H__ -#define __ASM_PPC_REGS_H__ - -#include - -/* Pickup Book E specific registers. */ -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) -#include -#endif - -/* Machine State Register (MSR) Fields */ -#define MSR_SF (1<<63) -#define MSR_ISF (1<<61) -#define MSR_VEC (1<<25) /* Enable AltiVec */ -#define MSR_POW (1<<18) /* Enable Power Management */ -#define MSR_WE (1<<18) /* Wait State Enable */ -#define MSR_TGPR (1<<17) /* TLB Update registers in use */ -#define MSR_CE (1<<17) /* Critical Interrupt Enable */ -#define MSR_ILE (1<<16) /* Interrupt Little Endian */ -#define MSR_EE (1<<15) /* External Interrupt Enable */ -#define MSR_PR (1<<14) /* Problem State / Privilege Level */ -#define MSR_FP (1<<13) /* Floating Point enable */ -#define MSR_ME (1<<12) /* Machine Check Enable */ -#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */ -#define MSR_SE (1<<10) /* Single Step */ -#define MSR_BE (1<<9) /* Branch Trace */ -#define MSR_DE (1<<9) /* Debug Exception Enable */ -#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */ -#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */ -#define MSR_IR (1<<5) /* Instruction Relocate */ -#define MSR_DR (1<<4) /* Data Relocate */ -#define MSR_PE (1<<3) /* Protection Enable */ -#define MSR_PX (1<<2) /* Protection Exclusive Mode */ -#define MSR_RI (1<<1) /* Recoverable Exception */ -#define MSR_LE (1<<0) /* Little Endian */ - -/* Default MSR for kernel mode. */ -#ifdef CONFIG_APUS_FAST_EXCEPT -#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR) -#endif - -#ifndef MSR_KERNEL -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) -#endif - -#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) - -/* Floating Point Status and Control Register (FPSCR) Fields */ -#define FPSCR_FX 0x80000000 /* FPU exception summary */ -#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */ -#define FPSCR_VX 0x20000000 /* Invalid operation summary */ -#define FPSCR_OX 0x10000000 /* Overflow exception summary */ -#define FPSCR_UX 0x08000000 /* Underflow exception summary */ -#define FPSCR_ZX 0x04000000 /* Zero-devide exception summary */ -#define FPSCR_XX 0x02000000 /* Inexact exception summary */ -#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */ -#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */ -#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */ -#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */ -#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */ -#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */ -#define FPSCR_FR 0x00040000 /* Fraction rounded */ -#define FPSCR_FI 0x00020000 /* Fraction inexact */ -#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */ -#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */ -#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */ -#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */ -#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */ -#define FPSCR_VE 0x00000080 /* Invalid op exception enable */ -#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */ -#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */ -#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */ -#define FPSCR_XE 0x00000008 /* FP inexact exception enable */ -#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ -#define FPSCR_RN 0x00000003 /* FPU rounding control */ - -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_CTR 0x009 /* Count Register */ -#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ -#define SPRN_DAR 0x013 /* Data Address Register */ -#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ -#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ -#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ -#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ -#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ -#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ -#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ -#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ -#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */ -#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */ -#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */ -#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */ -#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */ -#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */ -#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */ -#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */ -#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */ -#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */ -#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ -#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ -#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ - -#define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_DER 0x095 /* Debug Enable Regsiter */ -#define DER_RSTE 0x40000000 /* Reset Interrupt */ -#define DER_CHSTPE 0x20000000 /* Check Stop */ -#define DER_MCIE 0x10000000 /* Machine Check Interrupt */ -#define DER_EXTIE 0x02000000 /* External Interrupt */ -#define DER_ALIE 0x01000000 /* Alignment Interrupt */ -#define DER_PRIE 0x00800000 /* Program Interrupt */ -#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */ -#define DER_DECIE 0x00200000 /* Decrementer Interrupt */ -#define DER_SYSIE 0x00040000 /* System Call Interrupt */ -#define DER_TRE 0x00020000 /* Trace Interrupt */ -#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */ -#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */ -#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */ -#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */ -#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */ -#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */ -#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */ -#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */ -#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */ -#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ -#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ -#define SPRN_EAR 0x11A /* External Address Register */ -#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ -#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ -#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ -#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ -#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ -#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ -#define HID0_SBCLK (1<<27) -#define HID0_EICE (1<<26) -#define HID0_TBEN (1<<26) /* Timebase enable - 745x */ -#define HID0_ECLK (1<<25) -#define HID0_PAR (1<<24) -#define HID0_STEN (1<<24) /* Software table search enable - 745x */ -#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */ -#define HID0_DOZE (1<<23) -#define HID0_NAP (1<<22) -#define HID0_SLEEP (1<<21) -#define HID0_DPM (1<<20) -#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */ -#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */ -#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/ -#define HID0_ICE (1<<15) /* Instruction Cache Enable */ -#define HID0_DCE (1<<14) /* Data Cache Enable */ -#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ -#define HID0_DLOCK (1<<12) /* Data Cache Lock */ -#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ -#define HID0_DCI (1<<10) /* Data Cache Invalidate */ -#define HID0_SPD (1<<9) /* Speculative disable */ -#define HID0_DAPUEN (1<<8) /* Debug APU enable */ -#define HID0_SGE (1<<7) /* Store Gathering Enable */ -#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ -#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */ -#define HID0_LRSTK (1<<4) /* Link register stack - 745x */ -#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ -#define HID0_ABE (1<<3) /* Address Broadcast Enable */ -#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */ -#define HID0_BHTE (1<<2) /* Branch History Table Enable */ -#define HID0_BTCD (1<<1) /* Branch target cache disable */ -#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ -#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ - -#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ -#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ -#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ -#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ -#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */ -#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */ -#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ -#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ -#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ -#define HID1_PS (1<<16) /* 750FX PLL selection */ -#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ -#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ -#define SPRN_HID4 0x3F4 /* 970 HID4 */ -#define SPRN_HID5 0x3F6 /* 970 HID5 */ -#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) -#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ -#endif -#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ -#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ -#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ -#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */ -#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */ -#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */ -#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */ -#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */ -#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */ -#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */ -#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */ -#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */ -#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */ -#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */ -#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */ -#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ -#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ -#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ -#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ -#define ICTRL_EICE 0x08000000 /* enable icache parity errs */ -#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ -#define ICTRL_EICP 0x00000100 /* enable icache par. check */ -#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ -#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ -#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ -#define SPRN_L2CR2 0x3f8 -#define L2CR_L2E 0x80000000 /* L2 enable */ -#define L2CR_L2PE 0x40000000 /* L2 parity enable */ -#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */ -#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */ -#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */ -#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */ -#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */ -#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */ -#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */ -#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */ -#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */ -#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */ -#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */ -#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */ -#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */ -#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */ -#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */ -#define L2CR_L2DO 0x00400000 /* L2 data only */ -#define L2CR_L2I 0x00200000 /* L2 global invalidate */ -#define L2CR_L2CTL 0x00100000 /* L2 RAM control */ -#define L2CR_L2WT 0x00080000 /* L2 write-through */ -#define L2CR_L2TS 0x00040000 /* L2 test support */ -#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */ -#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */ -#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */ -#define L2CR_L2SL 0x00008000 /* L2 DLL slow */ -#define L2CR_L2DF 0x00004000 /* L2 differential clock */ -#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */ -#define L2CR_L2IP 0x00000001 /* L2 GI in progress */ -#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */ -#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ -#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ -#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ -#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */ -#define L3CR_L3E 0x80000000 /* L3 enable */ -#define L3CR_L3PE 0x40000000 /* L3 data parity enable */ -#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ -#define L3CR_L3SIZ 0x10000000 /* L3 size */ -#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */ -#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */ -#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */ -#define L3CR_L3IO 0x00400000 /* L3 instruction only */ -#define L3CR_L3SPO 0x00040000 /* L3 sample point override */ -#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */ -#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */ -#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */ -#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */ -#define L3CR_L3I 0x00000400 /* L3 global invalidate */ -#define L3CR_L3RT 0x00000300 /* L3 SRAM type */ -#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */ -#define L3CR_L3DO 0x00000040 /* L3 data only mode */ -#define L3CR_PMEN 0x00000004 /* L3 private memory enable */ -#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */ -#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */ -#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */ -#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */ -#define SPRN_LDSTDB 0x3f4 /* */ -#define SPRN_LR 0x008 /* Link Register */ -#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */ -#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */ -#ifndef SPRN_PIR -#define SPRN_PIR 0x3FF /* Processor Identification Register */ -#endif -#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */ -#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */ -#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */ -#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */ -#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ -#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ -#define SPRN_PVR 0x11F /* Processor Version Register */ -#define SPRN_RPA 0x3D6 /* Required Physical Address Register */ -#define SPRN_SDA 0x3BF /* Sampled Data Address Register */ -#define SPRN_SDR1 0x019 /* MMU Hash Base Register */ -#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ -#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ -#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ -#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ -#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ -#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ -#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ -#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ -#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ -#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ -#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ -#ifndef SPRN_SVR -#define SPRN_SVR 0x11E /* System Version Register */ -#endif -#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ -/* these bits were defined in inverted endian sense originally, ugh, confusing */ -#define THRM1_TIN (1 << 31) -#define THRM1_TIV (1 << 30) -#define THRM1_THRES(x) ((x&0x7f)<<23) -#define THRM3_SITV(x) ((x&0x3fff)<<1) -#define THRM1_TID (1<<2) -#define THRM1_TIE (1<<1) -#define THRM1_V (1<<0) -#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ -#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ -#define THRM3_E (1<<0) -#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ -#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ -#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ -#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */ -#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */ -#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */ -#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */ -#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ -#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ -#define SPRN_XER 0x001 /* Fixed Point Exception Register */ - -/* Bit definitions for MMCR0 and PMC1 / PMC2. */ -#define MMCR0_PMC1_CYCLES (1 << 7) -#define MMCR0_PMC1_ICACHEMISS (5 << 7) -#define MMCR0_PMC1_DTLB (6 << 7) -#define MMCR0_PMC2_DCACHEMISS 0x6 -#define MMCR0_PMC2_CYCLES 0x1 -#define MMCR0_PMC2_ITLB 0x7 -#define MMCR0_PMC2_LOADMISSTIME 0x5 -#define MMCR0_PMXE (1 << 26) - -/* Processor Version Register */ - -/* Processor Version Register (PVR) field extraction */ - -#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */ -#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */ - -/* - * IBM has further subdivided the standard PowerPC 16-bit version and - * revision subfields of the PVR for the PowerPC 403s into the following: - */ - -#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */ -#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */ -#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */ -#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */ -#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ -#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ - -/* Processor Version Numbers */ - -#define PVR_403GA 0x00200000 -#define PVR_403GB 0x00200100 -#define PVR_403GC 0x00200200 -#define PVR_403GCX 0x00201400 -#define PVR_405GP 0x40110000 -#define PVR_STB03XXX 0x40310000 -#define PVR_NP405H 0x41410000 -#define PVR_NP405L 0x41610000 -#define PVR_601 0x00010000 -#define PVR_602 0x00050000 -#define PVR_603 0x00030000 -#define PVR_603e 0x00060000 -#define PVR_603ev 0x00070000 -#define PVR_603r 0x00071000 -#define PVR_604 0x00040000 -#define PVR_604e 0x00090000 -#define PVR_604r 0x000A0000 -#define PVR_620 0x00140000 -#define PVR_740 0x00080000 -#define PVR_750 PVR_740 -#define PVR_740P 0x10080000 -#define PVR_750P PVR_740P -#define PVR_7400 0x000C0000 -#define PVR_7410 0x800C0000 -#define PVR_7450 0x80000000 -#define PVR_8540 0x80200000 -#define PVR_8560 0x80200000 -/* - * For the 8xx processors, all of them report the same PVR family for - * the PowerPC core. The various versions of these processors must be - * differentiated by the version number in the Communication Processor - * Module (CPM). - */ -#define PVR_821 0x00500000 -#define PVR_823 PVR_821 -#define PVR_850 PVR_821 -#define PVR_860 PVR_821 -#define PVR_8240 0x00810100 -#define PVR_8245 0x80811014 -#define PVR_8260 PVR_8240 - -#if 0 -/* Segment Registers */ -#define SR0 0 -#define SR1 1 -#define SR2 2 -#define SR3 3 -#define SR4 4 -#define SR5 5 -#define SR6 6 -#define SR7 7 -#define SR8 8 -#define SR9 9 -#define SR10 10 -#define SR11 11 -#define SR12 12 -#define SR13 13 -#define SR14 14 -#define SR15 15 -#endif - -/* Macros for setting and retrieving special purpose registers */ -#ifndef __ASSEMBLY__ -#define mfmsr() ({unsigned int rval; \ - asm volatile("mfmsr %0" : "=r" (rval)); rval;}) -#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v)) - -#define mfspr(rn) ({unsigned int rval; \ - asm volatile("mfspr %0," __stringify(rn) \ - : "=r" (rval)); rval;}) -#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) - -#define mfsrin(v) ({unsigned int rval; \ - asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \ - rval;}) - -#define proc_trap() asm volatile("trap") -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_PPC_REGS_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc64/kdebug.h b/include/asm-ppc64/kdebug.h deleted file mode 100644 index d383d16..0000000 --- a/include/asm-ppc64/kdebug.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _PPC64_KDEBUG_H -#define _PPC64_KDEBUG_H 1 - -/* nearly identical to x86_64/i386 code */ - -#include - -struct pt_regs; - -struct die_args { - struct pt_regs *regs; - const char *str; - long err; - int trapnr; - int signr; -}; - -/* - Note - you should never unregister because that can race with NMIs. - If you really want to do it first unregister - then synchronize_sched - - then free. - */ -int register_die_notifier(struct notifier_block *nb); -extern struct notifier_block *ppc64_die_chain; - -/* Grossly misnamed. */ -enum die_val { - DIE_OOPS = 1, - DIE_IABR_MATCH, - DIE_DABR_MATCH, - DIE_BPT, - DIE_SSTEP, - DIE_GPF, - DIE_PAGE_FAULT, -}; - -static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig) -{ - struct die_args args = { .regs=regs, .str=str, .err=err, .trapnr=trap,.signr=sig }; - return notifier_call_chain(&ppc64_die_chain, val, &args); -} - -#endif diff --git a/include/asm-ppc64/kprobes.h b/include/asm-ppc64/kprobes.h deleted file mode 100644 index d9129d2..0000000 --- a/include/asm-ppc64/kprobes.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef _ASM_KPROBES_H -#define _ASM_KPROBES_H -/* - * Kernel Probes (KProbes) - * include/asm-ppc64/kprobes.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * - * 2002-Oct Created by Vamsi Krishna S Kernel - * Probes initial implementation ( includes suggestions from - * Rusty Russell). - * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli - * - */ -#include -#include - -struct pt_regs; - -typedef unsigned int kprobe_opcode_t; -#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */ -#define MAX_INSN_SIZE 1 - -#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008) -#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088) -#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) -#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) - -#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)((func_descr_t *)pentry) - -#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ - IS_TWI(instr) || IS_TDI(instr)) - -#define ARCH_SUPPORTS_KRETPROBES -void kretprobe_trampoline(void); - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - /* copy of original instruction */ - kprobe_opcode_t *insn; -}; - -#ifdef CONFIG_KPROBES -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); -#else /* !CONFIG_KPROBES */ -static inline int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) -{ - return 0; -} -#endif -#endif /* _ASM_KPROBES_H */ -- 2.7.4