From bbcd6d543de335bf81e96477f46a60a8bf51039c Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 25 Jul 2008 01:46:14 -0700 Subject: [PATCH] gpio: max732x driver This adds a driver supporting a family of I2C port expanders from Maxim, which includes the MAX7319 and MAX7320-7327 chips. [dbrownell@users.sourceforge.net: minor fixes] Signed-off-by: Jack Ren Signed-off-by: Eric Miao Acked-by: Jean Delvare Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/Kconfig | 19 +++ drivers/gpio/Makefile | 1 + drivers/gpio/max732x.c | 385 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/i2c/max732x.h | 19 +++ 4 files changed, 424 insertions(+) create mode 100644 drivers/gpio/max732x.c create mode 100644 include/linux/i2c/max732x.h diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 5a355f8..dbd42d6 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -67,6 +67,25 @@ config GPIO_SYSFS comment "I2C GPIO expanders:" +config GPIO_MAX732X + tristate "MAX7319, MAX7320-7327 I2C Port Expanders" + depends on I2C + help + Say yes here to support the MAX7319, MAX7320-7327 series of I2C + Port Expanders. Each IO port on these chips has a fixed role of + Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain + Input and Output (designed by 'P'). The combinations are listed + below: + + 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), + max7322 (4I4O), max7323 (4P4O) + + 16 bits: max7324 (8I8O), max7325 (8P8O), + max7326 (4I12O), max7327 (4P12O) + + Board setup code must specify the model to use, and the start + number for these GPIOs. + config GPIO_PCA953X tristate "PCA953x, PCA955x, and MAX7310 I/O ports" depends on I2C diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 8c45948..01b4bbd 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG obj-$(CONFIG_GPIOLIB) += gpiolib.o obj-$(CONFIG_GPIO_MAX7301) += max7301.o +obj-$(CONFIG_GPIO_MAX732X) += max732x.o obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c new file mode 100644 index 0000000..b51c813 --- /dev/null +++ b/drivers/gpio/max732x.c @@ -0,0 +1,385 @@ +/* + * max732x.c - I2C Port Expander with 8/16 I/O + * + * Copyright (C) 2007 Marvell International Ltd. + * Copyright (C) 2008 Jack Ren + * Copyright (C) 2008 Eric Miao + * + * Derived from drivers/gpio/pca953x.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include +#include +#include +#include + +#include +#include + + +/* + * Each port of MAX732x (including MAX7319) falls into one of the + * following three types: + * + * - Push Pull Output + * - Input + * - Open Drain I/O + * + * designated by 'O', 'I' and 'P' individually according to MAXIM's + * datasheets. + * + * There are two groups of I/O ports, each group usually includes + * up to 8 I/O ports, and is accessed by a specific I2C address: + * + * - Group A : by I2C address 0b'110xxxx + * - Group B : by I2C address 0b'101xxxx + * + * where 'xxxx' is decided by the connections of pin AD2/AD0. The + * address used also affects the initial state of output signals. + * + * Within each group of ports, there are five known combinations of + * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for + * the detailed organization of these ports. + * + * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16', + * and GPIOs from GROUP_A are numbered before those from GROUP_B + * (if there are two groups). + * + * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so + * they are not supported by this driver. + */ + +#define PORT_NONE 0x0 /* '/' No Port */ +#define PORT_OUTPUT 0x1 /* 'O' Push-Pull, Output Only */ +#define PORT_INPUT 0x2 /* 'I' Input Only */ +#define PORT_OPENDRAIN 0x3 /* 'P' Open-Drain, I/O */ + +#define IO_4I4O 0x5AA5 /* O7 O6 I5 I4 I3 I2 O1 O0 */ +#define IO_4P4O 0x5FF5 /* O7 O6 P5 P4 P3 P2 O1 O0 */ +#define IO_8I 0xAAAA /* I7 I6 I5 I4 I3 I2 I1 I0 */ +#define IO_8P 0xFFFF /* P7 P6 P5 P4 P3 P2 P1 P0 */ +#define IO_8O 0x5555 /* O7 O6 O5 O4 O3 O2 O1 O0 */ + +#define GROUP_A(x) ((x) & 0xffff) /* I2C Addr: 0b'110xxxx */ +#define GROUP_B(x) ((x) << 16) /* I2C Addr: 0b'101xxxx */ + +static const struct i2c_device_id max732x_id[] = { + { "max7319", GROUP_A(IO_8I) }, + { "max7320", GROUP_B(IO_8O) }, + { "max7321", GROUP_A(IO_8P) }, + { "max7322", GROUP_A(IO_4I4O) }, + { "max7323", GROUP_A(IO_4P4O) }, + { "max7324", GROUP_A(IO_8I) | GROUP_B(IO_8O) }, + { "max7325", GROUP_A(IO_8P) | GROUP_B(IO_8O) }, + { "max7326", GROUP_A(IO_4I4O) | GROUP_B(IO_8O) }, + { "max7327", GROUP_A(IO_4P4O) | GROUP_B(IO_8O) }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, max732x_id); + +struct max732x_chip { + struct gpio_chip gpio_chip; + + struct i2c_client *client; /* "main" client */ + struct i2c_client *client_dummy; + struct i2c_client *client_group_a; + struct i2c_client *client_group_b; + + unsigned int mask_group_a; + unsigned int dir_input; + unsigned int dir_output; + + struct mutex lock; + uint8_t reg_out[2]; +}; + +static int max732x_write(struct max732x_chip *chip, int group_a, uint8_t val) +{ + struct i2c_client *client; + int ret; + + client = group_a ? chip->client_group_a : chip->client_group_b; + ret = i2c_smbus_write_byte(client, val); + if (ret < 0) { + dev_err(&client->dev, "failed writing\n"); + return ret; + } + + return 0; +} + +static int max732x_read(struct max732x_chip *chip, int group_a, uint8_t *val) +{ + struct i2c_client *client; + int ret; + + client = group_a ? chip->client_group_a : chip->client_group_b; + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, "failed reading\n"); + return ret; + } + + *val = (uint8_t)ret; + return 0; +} + +static inline int is_group_a(struct max732x_chip *chip, unsigned off) +{ + return (1u << off) & chip->mask_group_a; +} + +static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off) +{ + struct max732x_chip *chip; + uint8_t reg_val; + int ret; + + chip = container_of(gc, struct max732x_chip, gpio_chip); + + ret = max732x_read(chip, is_group_a(chip, off), ®_val); + if (ret < 0) + return 0; + + return reg_val & (1u << (off & 0x7)); +} + +static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) +{ + struct max732x_chip *chip; + uint8_t reg_out, mask = 1u << (off & 0x7); + int ret; + + chip = container_of(gc, struct max732x_chip, gpio_chip); + + mutex_lock(&chip->lock); + + reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0]; + reg_out = (val) ? reg_out | mask : reg_out & ~mask; + + ret = max732x_write(chip, is_group_a(chip, off), reg_out); + if (ret < 0) + goto out; + + /* update the shadow register then */ + if (off > 7) + chip->reg_out[1] = reg_out; + else + chip->reg_out[0] = reg_out; +out: + mutex_unlock(&chip->lock); +} + +static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off) +{ + struct max732x_chip *chip; + unsigned int mask = 1u << off; + + chip = container_of(gc, struct max732x_chip, gpio_chip); + + if ((mask & chip->dir_input) == 0) { + dev_dbg(&chip->client->dev, "%s port %d is output only\n", + chip->client->name, off); + return -EACCES; + } + + return 0; +} + +static int max732x_gpio_direction_output(struct gpio_chip *gc, + unsigned off, int val) +{ + struct max732x_chip *chip; + unsigned int mask = 1u << off; + + chip = container_of(gc, struct max732x_chip, gpio_chip); + + if ((mask & chip->dir_output) == 0) { + dev_dbg(&chip->client->dev, "%s port %d is input only\n", + chip->client->name, off); + return -EACCES; + } + + max732x_gpio_set_value(gc, off, val); + return 0; +} + +static int __devinit max732x_setup_gpio(struct max732x_chip *chip, + const struct i2c_device_id *id, + unsigned gpio_start) +{ + struct gpio_chip *gc = &chip->gpio_chip; + uint32_t id_data = id->driver_data; + int i, port = 0; + + for (i = 0; i < 16; i++, id_data >>= 2) { + unsigned int mask = 1 << port; + + switch (id_data & 0x3) { + case PORT_OUTPUT: + chip->dir_output |= mask; + break; + case PORT_INPUT: + chip->dir_input |= mask; + break; + case PORT_OPENDRAIN: + chip->dir_output |= mask; + chip->dir_input |= mask; + break; + default: + continue; + } + + if (i < 8) + chip->mask_group_a |= mask; + port++; + } + + if (chip->dir_input) + gc->direction_input = max732x_gpio_direction_input; + if (chip->dir_output) { + gc->direction_output = max732x_gpio_direction_output; + gc->set = max732x_gpio_set_value; + } + gc->get = max732x_gpio_get_value; + gc->can_sleep = 1; + + gc->base = gpio_start; + gc->ngpio = port; + gc->label = chip->client->name; + gc->owner = THIS_MODULE; + + return port; +} + +static int __devinit max732x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max732x_platform_data *pdata; + struct max732x_chip *chip; + struct i2c_client *c; + uint16_t addr_a, addr_b; + int ret, nr_port; + + pdata = client->dev.platform_data; + if (pdata == NULL) + return -ENODEV; + + chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + chip->client = client; + + nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base); + + addr_a = (client->addr & 0x0f) | 0x60; + addr_b = (client->addr & 0x0f) | 0x50; + + switch (client->addr & 0x70) { + case 0x60: + chip->client_group_a = client; + if (nr_port > 7) { + c = i2c_new_dummy(client->adapter, addr_b); + chip->client_group_b = chip->client_dummy = c; + } + break; + case 0x50: + chip->client_group_b = client; + if (nr_port > 7) { + c = i2c_new_dummy(client->adapter, addr_a); + chip->client_group_a = chip->client_dummy = c; + } + break; + default: + dev_err(&client->dev, "invalid I2C address specified %02x\n", + client->addr); + ret = -EINVAL; + goto out_failed; + } + + mutex_init(&chip->lock); + + max732x_read(chip, is_group_a(chip, 0), &chip->reg_out[0]); + if (nr_port > 7) + max732x_read(chip, is_group_a(chip, 8), &chip->reg_out[1]); + + ret = gpiochip_add(&chip->gpio_chip); + if (ret) + goto out_failed; + + if (pdata->setup) { + ret = pdata->setup(client, chip->gpio_chip.base, + chip->gpio_chip.ngpio, pdata->context); + if (ret < 0) + dev_warn(&client->dev, "setup failed, %d\n", ret); + } + + i2c_set_clientdata(client, chip); + return 0; + +out_failed: + kfree(chip); + return ret; +} + +static int __devexit max732x_remove(struct i2c_client *client) +{ + struct max732x_platform_data *pdata = client->dev.platform_data; + struct max732x_chip *chip = i2c_get_clientdata(client); + int ret; + + if (pdata->teardown) { + ret = pdata->teardown(client, chip->gpio_chip.base, + chip->gpio_chip.ngpio, pdata->context); + if (ret < 0) { + dev_err(&client->dev, "%s failed, %d\n", + "teardown", ret); + return ret; + } + } + + ret = gpiochip_remove(&chip->gpio_chip); + if (ret) { + dev_err(&client->dev, "%s failed, %d\n", + "gpiochip_remove()", ret); + return ret; + } + + /* unregister any dummy i2c_client */ + if (chip->client_dummy) + i2c_unregister_device(chip->client_dummy); + + kfree(chip); + return 0; +} + +static struct i2c_driver max732x_driver = { + .driver = { + .name = "max732x", + .owner = THIS_MODULE, + }, + .probe = max732x_probe, + .remove = __devexit_p(max732x_remove), + .id_table = max732x_id, +}; + +static int __init max732x_init(void) +{ + return i2c_add_driver(&max732x_driver); +} +module_init(max732x_init); + +static void __exit max732x_exit(void) +{ + i2c_del_driver(&max732x_driver); +} +module_exit(max732x_exit); + +MODULE_AUTHOR("Eric Miao "); +MODULE_DESCRIPTION("GPIO expander driver for MAX732X"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h new file mode 100644 index 0000000..e103366 --- /dev/null +++ b/include/linux/i2c/max732x.h @@ -0,0 +1,19 @@ +#ifndef __LINUX_I2C_MAX732X_H +#define __LINUX_I2C_MAX732X_H + +/* platform data for the MAX732x 8/16-bit I/O expander driver */ + +struct max732x_platform_data { + /* number of the first GPIO */ + unsigned gpio_base; + + void *context; /* param to setup/teardown */ + + int (*setup)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); +}; +#endif /* __LINUX_I2C_MAX732X_H */ -- 2.7.4