From bb5cba40dc7f079ea7ee3ae760b7c388b6eb5fc3 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 14 Jan 2014 21:31:35 +0100 Subject: [PATCH] mmc: block: Fixup busy detection while invoking stop cmd at recovery When sending a stop command at the recovery path, use a R1B response when the failing data request are a WRITE. Thus we also care about the busy detection completion in this case. For a failing READ request, we use a R1 response for the stop command, since we don't need to care about busy detection in this case. To align behavior between hosts supporting MMC_CAP_WAIT_WHILE_BUSY and those who are not, we add a CMD13 polling method for the card's status. We also respect whether the host has specified the max_busy_timeout, which means we may fallback to CMD13 polling if the timeout is greater than what the host are able to support. Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 83 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 28 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 813ec83..452782b 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -721,19 +721,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) return result; } -static int send_stop(struct mmc_card *card, u32 *status) -{ - struct mmc_command cmd = {0}; - int err; - - cmd.opcode = MMC_STOP_TRANSMISSION; - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, 5); - if (err == 0) - *status = cmd.resp[0]; - return err; -} - static int get_card_status(struct mmc_card *card, u32 *status, int retries) { struct mmc_command cmd = {0}; @@ -797,6 +784,51 @@ static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, return err; } +static int send_stop(struct mmc_card *card, unsigned int timeout_ms, + struct request *req, int *gen_err, u32 *stop_status) +{ + struct mmc_host *host = card->host; + struct mmc_command cmd = {0}; + int err; + bool use_r1b_resp = rq_data_dir(req) == WRITE; + + /* + * Normally we use R1B responses for WRITE, but in cases where the host + * has specified a max_busy_timeout we need to validate it. A failure + * means we need to prevent the host from doing hw busy detection, which + * is done by converting to a R1 response instead. + */ + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) + use_r1b_resp = false; + + cmd.opcode = MMC_STOP_TRANSMISSION; + if (use_r1b_resp) { + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = timeout_ms; + } else { + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } + + err = mmc_wait_for_cmd(host, &cmd, 5); + if (err) + return err; + + *stop_status = cmd.resp[0]; + + /* No need to check card status in case of READ. */ + if (rq_data_dir(req) == READ) + return 0; + + if (!mmc_host_is_spi(host) && + (*stop_status & R1_ERROR)) { + pr_err("%s: %s: general error sending stop command, resp %#x\n", + req->rq_disk->disk_name, __func__, *stop_status); + *gen_err = 1; + } + + return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err); +} + #define ERR_NOMEDIUM 3 #define ERR_RETRY 2 #define ERR_ABORT 1 @@ -913,26 +945,21 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, */ if (R1_CURRENT_STATE(status) == R1_STATE_DATA || R1_CURRENT_STATE(status) == R1_STATE_RCV) { - err = send_stop(card, &stop_status); - if (err) + err = send_stop(card, + DIV_ROUND_UP(brq->data.timeout_ns, 1000000), + req, gen_err, &stop_status); + if (err) { pr_err("%s: error %d sending stop command\n", req->rq_disk->disk_name, err); - - /* - * If the stop cmd also timed out, the card is probably - * not present, so abort. Other errors are bad news too. - */ - if (err) + /* + * If the stop cmd also timed out, the card is probably + * not present, so abort. Other errors are bad news too. + */ return ERR_ABORT; + } + if (stop_status & R1_CARD_ECC_FAILED) *ecc_err = 1; - if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) - if (stop_status & R1_ERROR) { - pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n", - req->rq_disk->disk_name, __func__, - stop_status); - *gen_err = 1; - } } /* Check for set block count errors */ -- 2.7.4