From ba9137fe2d342d71e61a4e81bd40dff3b4901539 Mon Sep 17 00:00:00 2001 From: John Gilmore Date: Fri, 25 Oct 1991 07:16:56 +0000 Subject: [PATCH] Initial revision --- bfd/coff-rs6000.c | 500 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ bfd/cpu-rs6000.c | 44 +++++ 2 files changed, 544 insertions(+) create mode 100644 bfd/coff-rs6000.c create mode 100644 bfd/cpu-rs6000.c diff --git a/bfd/coff-rs6000.c b/bfd/coff-rs6000.c new file mode 100644 index 0000000..5f76471 --- /dev/null +++ b/bfd/coff-rs6000.c @@ -0,0 +1,500 @@ +/* IBM RS/6000 "XCOFF" back-end for BFD. + Copyright (C) 1990, 1991 Free Software Foundation, Inc. + Written by Metin G. Ozisik, Mimi Phûông-Thåo Võ, and John Gilmore. + Archive support from Damon A. Permezel. + Contributed by IBM Corporation and Cygnus Support. + +This file is part of BFD, the Binary File Descriptor library. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* This port currently only handles reading object files -- no archive + support, no core files, and no writing. FIXME. */ + +/* Internalcoff.h and coffcode.h modify themselves based on this flag. */ +#define RS6000COFF_C 1 + +#include +#include +#include "bfd.h" +#include "libbfd.h" +#include "obstack.h" +#include "internalcoff.h" +#include "rs6000coff.h" +#include "libcoff.h" + +/* The main body of code is in coffcode.h. */ +#include "coffcode.h" + + +#if 0 +/* These are not yet ready for prime time. */ +#define coff_core_file_matches_executable_p \ + rs6000coff_core_file_matches_executable_p +#define coff_get_section_contents rs6000coff_get_section_contents +#define coff_openr_next_archived_file rs6000coff_openr_next_archived_file +#define coff_write_armap rs6000coff_write_armap +#define coff_stat_arch_elt rs6000coff_stat_arch_elt +#define coff_snarf_ar_hdr rs6000coff_snarf_ar_hdr +#define coff_mkarchive rs6000coff_mkarchive + +static bfd_target *rs6000coff_archive_p (); +static bfd_target *rs6000coff_core_p (); +static bfd_target *rs6000coff_object_p (); +static bfd_target *rs6000coff_real_object_p (); +#endif + +bfd_target rs6000coff_vec = +{ + "coff_rs6000", /* name */ + bfd_target_coff_flavour, + true, /* data byte order is big */ + true, /* header byte order is big */ + + (HAS_RELOC | EXEC_P | /* object flags */ + HAS_LINENO | HAS_DEBUG | + HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT), + + (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */ + '/', /* ar_pad_char */ + 15, /* ar_max_namelen??? FIXMEmgo */ + 3, /* default alignment power */ + + _do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* data */ + _do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* hdrs */ + + {_bfd_dummy_target, coff_object_p, /* bfd_check_format */ + bfd_generic_archive_p, _bfd_dummy_target}, + {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */ + bfd_false}, + {bfd_false, coff_write_object_contents, /* bfd_write_contents */ + _bfd_write_archive_contents, bfd_false}, + + JUMP_TABLE(coff), + COFF_SWAP_TABLE + +}; + + +#if 0 /* we don't have include file for this yet */ +/* ------------------------------------------------------------------------ */ +/* Support for archive file stuff.. */ +/* Stolen from Damon A. Parmazel's `bfd' portation. */ +/* ------------------------------------------------------------------------ */ + +#include "/usr/include/ar.h" /* doesn't do it. */ + + +#define arch_hdr(bfd) \ + ((struct ar_hdr *) \ + (((struct areltdata *)((bfd)->arelt_data))->arch_header)) + + +static boolean +rs6000coff_mkarchive (abfd) + bfd *abfd; +{ + bfd_error = invalid_operation; /* write not supported */ +} + + +/* This functions reads an arch header and returns an areltdata pointer, or + NULL on error. + + Presumes the file pointer is already in the right place (ie pointing + to the ar_hdr in the file). Moves the file pointer; on success it + should be pointing to the front of the file contents; on failure it + could have been moved arbitrarily. +*/ + +struct areltdata * +rs6000coff_snarf_ar_hdr (abfd) + bfd *abfd; +{ + extern int errno; + + struct { + struct ar_hdr hdr; + char namebuf[256]; + } h; + int size; + struct areltdata *ared; + unsigned int namelen = 0; + char *allocptr; + + size = sizeof (h.hdr); + if (bfd_read(&h.hdr, 1, size, abfd) != size) { + bfd_error = no_more_archived_files; + return NULL; + } + size = atoi(h.hdr.ar_namlen); /* ar_name[] length */ + size += size & 1; + + if (bfd_read(&h.hdr._ar_name.ar_name[2], 1, size, abfd) != size) { + bfd_error = no_more_archived_files; + return NULL; + } + + if (strncmp(h.hdr._ar_name.ar_fmag + size, AIAFMAG, 2)) { + bfd_error = malformed_archive; + return NULL; + } + + h.hdr._ar_name.ar_name[size] = 0; /* terminate filename */ + + /* + * if the filename is NULL, we're (probably) at the end. + */ + if (size == 0) { + bfd_error = no_more_archived_files; + return NULL; + } + + size += sizeof (h.hdr); + allocptr = bfd_zalloc(abfd, sizeof (*ared) + size); + + if (allocptr == NULL) { + bfd_error = no_memory; + return NULL; + } + + ared = (struct areltdata *) allocptr; + + ared->arch_header = (void *) (allocptr + sizeof (struct areltdata)); + memcpy ((char *) ared->arch_header, &h.hdr, size); + ared->parsed_size = atoi(h.hdr.ar_size); + ared->filename = ((AR_HDR*) ared->arch_header)->_ar_name.ar_name; + + return ared; +} + +/* + * xcoff_openr_next_archived_file - xcoff has nxt/prv seek addrs. + */ +static bfd * +rs6000coff_openr_next_archived_file(archive, last_file) + bfd *archive, *last_file; +{ + file_ptr filestart; + + if (!last_file) + filestart = bfd_ardata(archive)->first_file_filepos; + else + filestart = atol(arch_hdr(last_file)->ar_nxtmem); + + return get_elt_at_filepos (archive, filestart); +} + + +static bfd_target * +rs6000coff_archive_p (abfd) + bfd *abfd; +{ + struct fl_hdr hdr; + register struct artdata *art; + + if (bfd_read (&hdr, 1, sizeof (hdr), abfd) != sizeof (hdr)) { + bfd_error = wrong_format; + return 0; + } + + if (strncmp(hdr.fl_magic, AIAMAG, SAIAMAG)) { + bfd_error = wrong_format; + return 0; + } + + /* + * bfd_ardata() accesses the bfd->tdata field. + */ + abfd->tdata = (void *) bfd_zalloc(abfd, sizeof (*art) + sizeof (hdr)); + if ((art = bfd_ardata (abfd)) == NULL) { + bfd_error = no_memory; + return 0; + } + + art->first_file_filepos = atoi(hdr.fl_fstmoff); + *(struct fl_hdr *) (1 + art) = hdr; + + /* + * slurp in the member table, which I thing is the armap equivalent. + xcoff_slurp_armap(abfd); + */ + + if (abfd->obj_arch == bfd_arch_unknown) /* FIXME!!! */ + abfd->obj_arch = bfd_arch_rs6000; + + return abfd->xvec; +} + + +static int +rs6000coff_stat_arch_elt(abfd, buf) + bfd *abfd; + struct stat *buf; +{ + struct ar_hdr *hdr; + char *aloser; + + if (abfd->arelt_data == NULL) { + bfd_error = invalid_operation; + return -1; + } + + hdr = arch_hdr (abfd); + +#define foo(arelt, stelt, size) \ + buf->stelt = strtol (hdr->arelt, &aloser, size); \ + if (aloser == hdr->arelt) return -1; + + foo (ar_date, st_mtime, 10); + foo (ar_uid, st_uid, 10); + foo (ar_gid, st_gid, 10); + foo (ar_mode, st_mode, 8); + foo (ar_size, st_size, 10); + + return 0; +} + +static boolean +rs6000coff_write_armap (arch, elength, map, orl_count, stridx) + bfd *arch; + unsigned int elength; + struct orl *map; +{ + bfd_error = invalid_operation; + return false; +} + + +#endif /* if 0 */ + +#if 0 /* not sure if this will work on all hosts yet! */ +#ifdef AOUTHDR +#undef AOUTHDR +#endif + +/* ------------------------------------------------------------------------ */ +/* Support for core file stuff.. */ +/* ------------------------------------------------------------------------ */ + +#include +#include +#include + + +/* Number of special purpose registers supported bygdb. This value should match + `tm.h' in gdb directory. Clean this mess up and use the macros in sys/reg.h. + FIXMEmgo. */ + +#define NUM_OF_SPEC_REGS 7 +#define STACK_END_ADDR 0x2ff80000 + +#define core_hdr(bfd) (((Rs6kCorData*)(bfd->tdata))->hdr) +#define core_datasec(bfd) (((Rs6kCorData*)(bfd->tdata))->data_section) +#define core_stacksec(bfd) (((Rs6kCorData*)(bfd->tdata))->stack_section) +#define core_regsec(bfd) (((Rs6kCorData*)(bfd->tdata))->reg_section) +#define core_reg2sec(bfd) (((Rs6kCorData*)(bfd->tdata))->reg2_section) + +/* These are stored in the bfd's tdata */ +typedef struct { + struct core *hdr; /* core file header */ + asection *data_section, + *stack_section, + *reg_section, /* section for GPRs and special registers. */ + *reg2_section; /* section for FPRs. */ +} Rs6kCorData; + + +/* Decide if a given bfd represents a `core' file or not. There really is no + magic number or anything like, in rs6000coff. */ + +static bfd_target * +rs6000coff_core_p (abfd) + bfd *abfd; +{ + int fd; + struct core_dump coredata; + struct stat statbuf; + char *tmpptr; + + /* Use bfd_xxx routines, rather than O/S primitives to read coredata. FIXMEmgo */ + fd = open (abfd->filename, O_RDONLY); + + fstat (fd, &statbuf); + read (fd, &coredata, sizeof (struct core_dump)); + + close (fd); + + if (coredata.c_tab < (sizeof (coredata.c_u) + (int)&coredata.c_u - (int)&coredata.c_signo) || + coredata.c_tab >= statbuf.st_size || + (long)coredata.c_stack <= (long)coredata.c_tab ) { + return NULL; + } + +/* + If it looks like core file, then..... + read core file header..... (maybe you've done it above..) +*/ + + /* maybe you should alloc space for the whole core chunk over here!! FIXMEmgo */ + tmpptr = (char*)bfd_zalloc (abfd, sizeof (Rs6kCorData)); + set_tdata (abfd, tmpptr); + + /* .stack section. */ + if ((core_stacksec (abfd) = (asection*) bfd_zalloc (abfd, sizeof (asection))) + == NULL) { + bfd_error = no_memory; + /* bfd_release (abfd, ???? ) */ + return NULL; + } + core_stacksec (abfd)->name = ".stack"; + core_stacksec (abfd)->flags = SEC_ALLOC + SEC_LOAD; + core_stacksec (abfd)->size = coredata.c_size; + core_stacksec (abfd)->vma = STACK_END_ADDR - coredata.c_size; + core_stacksec (abfd)->filepos = coredata.c_stack; /*???? */ + + /* .reg section for GPRs and special registers. */ + if ((core_regsec (abfd) = (asection*) bfd_zalloc (abfd, sizeof (asection))) + == NULL) { + bfd_error = no_memory; + /* bfd_release (abfd, ???? ) */ + return NULL; + } + core_regsec (abfd)->name = ".reg"; + core_regsec (abfd)->flags = SEC_ALLOC; + core_regsec (abfd)->size = (32 + NUM_OF_SPEC_REGS) * 4; + core_regsec (abfd)->vma = NULL; /* not used?? */ + core_regsec (abfd)->filepos = + (char*)&coredata.c_u.u_save - (char*)&coredata; + + /* .reg2 section for FPRs (floating point registers). */ + if ((core_reg2sec (abfd) = (asection*) bfd_zalloc (abfd, sizeof (asection))) + == NULL) { + bfd_error = no_memory; + /* bfd_release (abfd, ???? ) */ + return NULL; + } + core_reg2sec (abfd)->name = ".reg2"; + core_reg2sec (abfd)->flags = SEC_ALLOC; + core_reg2sec (abfd)->size = 8 * 32; /* 32 FPRs. */ + core_reg2sec (abfd)->vma = NULL; /* not used?? */ + core_reg2sec (abfd)->filepos = + (char*)&coredata.c_u.u_save.fpr[0] - (char*)&coredata; + + /* set up section chain here. */ + abfd->section_count = 3; + abfd->sections = core_stacksec (abfd); + core_stacksec (abfd)->next = core_regsec(abfd); + core_regsec (abfd)->next = core_reg2sec (abfd); + core_reg2sec (abfd)->next = NULL; + + return abfd->xvec; /* this is garbage for now. */ +} + + + +/* return `true' if given core is from the given executable.. */ +static boolean +rs6000coff_core_file_matches_executable_p (core_bfd, exec_bfd) + bfd *core_bfd; + bfd *exec_bfd; +{ + FILE *fd; + struct core_dump coredata; + struct ld_info ldinfo; + char pathname [1024]; + char *str1, *str2; + + /* Use bfd_xxx routines, rather than O/S primitives, do error checking!! + FIXMEmgo */ + fd = fopen (core_bfd->filename, "r"); + + fread (&coredata, sizeof (struct core_dump), 1, fd); + fseek (fd, (long)coredata.c_tab, 0); + fread (&ldinfo, (char*)&ldinfo.ldinfo_filename[0] - (char*)&ldinfo.ldinfo_next, + 1, fd); + fscanf (fd, "%s", pathname); + printf ("path: %s\n", pathname); + + str1 = strrchr (pathname, '/'); + str2 = strrchr (exec_bfd->filename, '/'); + + /* step over character '/' */ + str1 = str1 ? str1+1 : &pathname[0]; + str2 = str2 ? str2+1 : exec_bfd->filename; + + fclose (fd); + return strcmp (str1, str2); +} + + +static boolean +rs6000coff_get_section_contents (abfd, section, location, offset, count) + bfd *abfd; + sec_ptr section; + PTR location; + file_ptr offset; + int count; +{ + if (count == 0) + return true; + + /* Reading a core file's sections will be slightly different. For the + rest of them we can use bfd_generic_get_section_contents () I suppose. */ + /* Make sure this routine works for any bfd and any section. FIXMEmgo. */ + + if (abfd->format == bfd_core && strcmp (section->name, ".reg") == 0) { + + struct mstsave mstatus; + int regoffset = (char*)&mstatus.gpr[0] - (char*)&mstatus; + + /* Assert that the only way this code will be executed is reading the + whole section. */ + if (offset || count != (sizeof(mstatus.gpr) + (4 * NUM_OF_SPEC_REGS))) + printf ("ERROR! in rs6000coff_get_section_contents()\n"); + + /* for `.reg' section, `filepos' is a pointer to the `mstsave' structure + in the core file. */ + + /* read GPR's into the location. */ + if ( bfd_seek(abfd, section->filepos + regoffset, SEEK_SET) == -1 + || bfd_read(location, 1, sizeof (mstatus.gpr), abfd) != sizeof (mstatus.gpr)) + return (false); /* on error */ + + /* increment location to the beginning of special registers in the section, + reset register offset value to the beginning of first special register + in mstsave structure, and read special registers. */ + + location = (PTR) ((char*)location + sizeof (mstatus.gpr)); + regoffset = (char*)&mstatus.iar - (char*)&mstatus; + + if ( bfd_seek(abfd, section->filepos + regoffset, SEEK_SET) == -1 + || bfd_read(location, 1, 4 * NUM_OF_SPEC_REGS, abfd) != + 4 * NUM_OF_SPEC_REGS) + return (false); /* on error */ + + /* increment location address, and read the special registers.. */ + /* FIXMEmgo */ + return (true); + } + + /* else, use default bfd section content transfer. */ + else + return bfd_generic_get_section_contents + (abfd, section, location, offset, count); +} + +#endif /* if 0 - for CORE */ + diff --git a/bfd/cpu-rs6000.c b/bfd/cpu-rs6000.c new file mode 100644 index 0000000..fe466a3 --- /dev/null +++ b/bfd/cpu-rs6000.c @@ -0,0 +1,44 @@ +/* BFD back-end for rs6000 support + Copyright (C) 1990-1991 Free Software Foundation, Inc. + Written by Mimi Phûông-Thåo Võ of IBM and John Gilmore of Cygnus Support. + +This file is part of BFD, the Binary File Descriptor library. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include "bfd.h" +#include "sysdep.h" +#include "libbfd.h" + +static bfd_arch_info_type arch_info_struct = + { + 32, /* 32 bits in a word */ + 32, /* 32 bits in an address */ + 8, /* 8 bits in a byte */ + bfd_arch_rs6000, + 6000, /* only 1 machine */ + "rs6000", + "rs6000:6000", + true, /* the one and only */ + bfd_default_compatible, + bfd_default_scan , + 0, + 0, + }; + +void DEFUN_VOID(bfd_rs6000_arch) +{ + bfd_arch_linkin(&arch_info_struct); +} -- 2.7.4