From b9d233ea21f192702f8bbf3f5f640e2dde308b25 Mon Sep 17 00:00:00 2001 From: Gatis Peisenieks Date: Thu, 8 Jul 2021 12:49:04 +0300 Subject: [PATCH] atl1c: fix Mikrotik 10/25G NIC detection Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable, on rare occasions it can happen that some physical functions of the NIC do not get initialized due to timeouted early MDIO op. This changes the atl1c probe on Mikrotik 10/25G NIC not to depend on MDIO op emulation. Signed-off-by: Gatis Peisenieks Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c index 7dff203..f19370c 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c @@ -594,6 +594,11 @@ int atl1c_phy_init(struct atl1c_hw *hw) int ret_val; u16 mii_bmcr_data = BMCR_RESET; + if (hw->nic_type == athr_mt) { + hw->phy_configured = true; + return 0; + } + if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) || (atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) { dev_err(&pdev->dev, "Error get phy ID\n"); -- 2.7.4