From b96952f498db61cdce60f3161a445442d1cc08bc Mon Sep 17 00:00:00 2001 From: Artur Rojek Date: Sun, 19 Jul 2020 22:53:07 +0200 Subject: [PATCH] IIO: Ingenic JZ47xx: Add touchscreen mode. The SADC component in JZ47xx SoCs provides support for touchscreen operations (pen position and pen down pressure) in single-ended and differential modes. The touchscreen component of SADC takes a significant time to stabilize after first receiving the clock and a delay of 50ms has been empirically proven to be a safe value before data sampling can begin. Of the known hardware to use this controller, GCW Zero and Anbernic RG-350 utilize the touchscreen mode by having their joystick(s) attached to the X/Y positive/negative input pins. JZ4770 and later SoCs introduce a low-level command feature. With it, up to 32 commands can be programmed, each one corresponding to a sampling job. It allows to change the low-voltage reference, the high-voltage reference, have them connected to VCC, GND, or one of the X-/X+ or Y-/Y+ pins. This patch introduces support for 6 stream-capable channels: - channel #0 samples X+/GND - channel #1 samples Y+/GND - channel #2 samples X-/GND - channel #3 samples Y-/GND - channel #4 samples X+/X- - channel #5 samples Y+/Y- Being able to sample X-/GND and Y-/GND is useful on some devices, where one joystick is connected to the X+/Y+ pins, and a second joystick is connected to the X-/Y- pins. All the boards which probe this driver have the interrupt provided from Device Tree, with no need to handle a case where the IRQ was not provided. Co-developed-by: Paul Cercueil Signed-off-by: Paul Cercueil Signed-off-by: Artur Rojek Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 1 + drivers/iio/adc/ingenic-adc.c | 250 +++++++++++++++++++++++++++++++++++++++++- 2 files changed, 249 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 12bb8b7..c331413 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -465,6 +465,7 @@ config INA2XX_ADC config INGENIC_ADC tristate "Ingenic JZ47xx SoCs ADC driver" depends on MIPS || COMPILE_TEST + select IIO_BUFFER help Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit. diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c index 16fc097..c5b0176 100644 --- a/drivers/iio/adc/ingenic-adc.c +++ b/drivers/iio/adc/ingenic-adc.c @@ -8,7 +8,9 @@ #include #include +#include #include +#include #include #include #include @@ -20,19 +22,46 @@ #define JZ_ADC_REG_CFG 0x04 #define JZ_ADC_REG_CTRL 0x08 #define JZ_ADC_REG_STATUS 0x0c +#define JZ_ADC_REG_ADSAME 0x10 +#define JZ_ADC_REG_ADWAIT 0x14 #define JZ_ADC_REG_ADTCH 0x18 #define JZ_ADC_REG_ADBDAT 0x1c #define JZ_ADC_REG_ADSDAT 0x20 +#define JZ_ADC_REG_ADCMD 0x24 #define JZ_ADC_REG_ADCLK 0x28 #define JZ_ADC_REG_ENABLE_PD BIT(7) #define JZ_ADC_REG_CFG_AUX_MD (BIT(0) | BIT(1)) #define JZ_ADC_REG_CFG_BAT_MD BIT(4) +#define JZ_ADC_REG_CFG_SAMPLE_NUM(n) ((n) << 10) +#define JZ_ADC_REG_CFG_PULL_UP(n) ((n) << 16) +#define JZ_ADC_REG_CFG_CMD_SEL BIT(22) +#define JZ_ADC_REG_CFG_TOUCH_OPS_MASK (BIT(31) | GENMASK(23, 10)) #define JZ_ADC_REG_ADCLK_CLKDIV_LSB 0 #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB 16 #define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB 8 #define JZ4770_ADC_REG_ADCLK_CLKDIVMS_LSB 16 +#define JZ_ADC_REG_ADCMD_YNADC BIT(7) +#define JZ_ADC_REG_ADCMD_YPADC BIT(8) +#define JZ_ADC_REG_ADCMD_XNADC BIT(9) +#define JZ_ADC_REG_ADCMD_XPADC BIT(10) +#define JZ_ADC_REG_ADCMD_VREFPYP BIT(11) +#define JZ_ADC_REG_ADCMD_VREFPXP BIT(12) +#define JZ_ADC_REG_ADCMD_VREFPXN BIT(13) +#define JZ_ADC_REG_ADCMD_VREFPAUX BIT(14) +#define JZ_ADC_REG_ADCMD_VREFPVDD33 BIT(15) +#define JZ_ADC_REG_ADCMD_VREFNYN BIT(16) +#define JZ_ADC_REG_ADCMD_VREFNXP BIT(17) +#define JZ_ADC_REG_ADCMD_VREFNXN BIT(18) +#define JZ_ADC_REG_ADCMD_VREFAUX BIT(19) +#define JZ_ADC_REG_ADCMD_YNGRU BIT(20) +#define JZ_ADC_REG_ADCMD_XNGRU BIT(21) +#define JZ_ADC_REG_ADCMD_XPGRU BIT(22) +#define JZ_ADC_REG_ADCMD_YPSUP BIT(23) +#define JZ_ADC_REG_ADCMD_XNSUP BIT(24) +#define JZ_ADC_REG_ADCMD_XPSUP BIT(25) + #define JZ_ADC_AUX_VREF 3300 #define JZ_ADC_AUX_VREF_BITS 12 #define JZ_ADC_BATTERY_LOW_VREF 2500 @@ -44,6 +73,14 @@ #define JZ4770_ADC_BATTERY_VREF 6600 #define JZ4770_ADC_BATTERY_VREF_BITS 12 +#define JZ_ADC_IRQ_AUX BIT(0) +#define JZ_ADC_IRQ_BATTERY BIT(1) +#define JZ_ADC_IRQ_TOUCH BIT(2) +#define JZ_ADC_IRQ_PEN_DOWN BIT(3) +#define JZ_ADC_IRQ_PEN_UP BIT(4) +#define JZ_ADC_IRQ_PEN_DOWN_SLEEP BIT(5) +#define JZ_ADC_IRQ_SLEEP BIT(7) + struct ingenic_adc; struct ingenic_adc_soc_data { @@ -69,6 +106,61 @@ struct ingenic_adc { bool low_vref_mode; }; +static void ingenic_adc_set_adcmd(struct iio_dev *iio_dev, unsigned long mask) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + + mutex_lock(&adc->lock); + + /* Init ADCMD */ + readl(adc->base + JZ_ADC_REG_ADCMD); + + if (mask & 0x3) { + /* Second channel (INGENIC_ADC_TOUCH_YP): sample YP vs. GND */ + writel(JZ_ADC_REG_ADCMD_XNGRU + | JZ_ADC_REG_ADCMD_VREFNXN | JZ_ADC_REG_ADCMD_VREFPVDD33 + | JZ_ADC_REG_ADCMD_YPADC, + adc->base + JZ_ADC_REG_ADCMD); + + /* First channel (INGENIC_ADC_TOUCH_XP): sample XP vs. GND */ + writel(JZ_ADC_REG_ADCMD_YNGRU + | JZ_ADC_REG_ADCMD_VREFNYN | JZ_ADC_REG_ADCMD_VREFPVDD33 + | JZ_ADC_REG_ADCMD_XPADC, + adc->base + JZ_ADC_REG_ADCMD); + } + + if (mask & 0xc) { + /* Fourth channel (INGENIC_ADC_TOUCH_YN): sample YN vs. GND */ + writel(JZ_ADC_REG_ADCMD_XNGRU + | JZ_ADC_REG_ADCMD_VREFNXN | JZ_ADC_REG_ADCMD_VREFPVDD33 + | JZ_ADC_REG_ADCMD_YNADC, + adc->base + JZ_ADC_REG_ADCMD); + + /* Third channel (INGENIC_ADC_TOUCH_XN): sample XN vs. GND */ + writel(JZ_ADC_REG_ADCMD_YNGRU + | JZ_ADC_REG_ADCMD_VREFNYN | JZ_ADC_REG_ADCMD_VREFPVDD33 + | JZ_ADC_REG_ADCMD_XNADC, + adc->base + JZ_ADC_REG_ADCMD); + } + + if (mask & 0x30) { + /* Sixth channel (INGENIC_ADC_TOUCH_YD): sample YP vs. YN */ + writel(JZ_ADC_REG_ADCMD_VREFNYN | JZ_ADC_REG_ADCMD_VREFPVDD33 + | JZ_ADC_REG_ADCMD_YPADC, + adc->base + JZ_ADC_REG_ADCMD); + + /* Fifth channel (INGENIC_ADC_TOUCH_XD): sample XP vs. XN */ + writel(JZ_ADC_REG_ADCMD_VREFNXN | JZ_ADC_REG_ADCMD_VREFPVDD33 + | JZ_ADC_REG_ADCMD_XPADC, + adc->base + JZ_ADC_REG_ADCMD); + } + + /* We're done */ + writel(0, adc->base + JZ_ADC_REG_ADCMD); + + mutex_unlock(&adc->lock); +} + static void ingenic_adc_set_config(struct ingenic_adc *adc, uint32_t mask, uint32_t val) @@ -289,6 +381,72 @@ static const struct iio_chan_spec jz4740_channels[] = { static const struct iio_chan_spec jz4770_channels[] = { { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = INGENIC_ADC_TOUCH_XP, + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = INGENIC_ADC_TOUCH_YP, + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = INGENIC_ADC_TOUCH_XN, + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = INGENIC_ADC_TOUCH_YN, + .scan_index = 3, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = INGENIC_ADC_TOUCH_XD, + .scan_index = 4, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = INGENIC_ADC_TOUCH_YD, + .scan_index = 5, + .scan_type = { + .sign = 'u', + .realbits = 12, + .storagebits = 16, + }, + }, + { .extend_name = "aux", .type = IIO_VOLTAGE, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | @@ -491,13 +649,89 @@ static const struct iio_info ingenic_adc_info = { .of_xlate = ingenic_adc_of_xlate, }; +static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + int ret; + + ret = clk_enable(adc->clk); + if (ret) { + dev_err(iio_dev->dev.parent, "Failed to enable clock: %d\n", + ret); + return ret; + } + + /* It takes significant time for the touchscreen hw to stabilize. */ + msleep(50); + ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, + JZ_ADC_REG_CFG_SAMPLE_NUM(4) | + JZ_ADC_REG_CFG_PULL_UP(4)); + + writew(80, adc->base + JZ_ADC_REG_ADWAIT); + writew(2, adc->base + JZ_ADC_REG_ADSAME); + writeb((u8)~JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_CTRL); + writel(0, adc->base + JZ_ADC_REG_ADTCH); + + ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_CMD_SEL, + JZ_ADC_REG_CFG_CMD_SEL); + ingenic_adc_set_adcmd(iio_dev, iio_dev->active_scan_mask[0]); + + ingenic_adc_enable(adc, 2, true); + + return 0; +} + +static int ingenic_adc_buffer_disable(struct iio_dev *iio_dev) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + + ingenic_adc_enable(adc, 2, false); + + ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_CMD_SEL, 0); + + writeb(0xff, adc->base + JZ_ADC_REG_CTRL); + writeb(0xff, adc->base + JZ_ADC_REG_STATUS); + ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, 0); + writew(0, adc->base + JZ_ADC_REG_ADSAME); + writew(0, adc->base + JZ_ADC_REG_ADWAIT); + clk_disable(adc->clk); + + return 0; +} + +static const struct iio_buffer_setup_ops ingenic_buffer_setup_ops = { + .postenable = &ingenic_adc_buffer_enable, + .predisable = &ingenic_adc_buffer_disable +}; + +static irqreturn_t ingenic_adc_irq(int irq, void *data) +{ + struct iio_dev *iio_dev = data; + struct ingenic_adc *adc = iio_priv(iio_dev); + unsigned long mask = iio_dev->active_scan_mask[0]; + unsigned int i; + u32 tdat[3]; + + for (i = 0; i < ARRAY_SIZE(tdat); mask >>= 2, i++) { + if (mask & 0x3) + tdat[i] = readl(adc->base + JZ_ADC_REG_ADTCH); + else + tdat[i] = 0; + } + + iio_push_to_buffers(iio_dev, tdat); + writeb(JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_STATUS); + + return IRQ_HANDLED; +} + static int ingenic_adc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct iio_dev *iio_dev; struct ingenic_adc *adc; const struct ingenic_adc_soc_data *soc_data; - int ret; + int irq, ret; soc_data = device_get_match_data(dev); if (!soc_data) @@ -512,6 +746,17 @@ static int ingenic_adc_probe(struct platform_device *pdev) mutex_init(&adc->aux_lock); adc->soc_data = soc_data; + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = devm_request_irq(dev, irq, ingenic_adc_irq, 0, + dev_name(dev), iio_dev); + if (ret < 0) { + dev_err(dev, "Failed to request irq: %d\n", ret); + return ret; + } + adc->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(adc->base)) return PTR_ERR(adc->base); @@ -551,7 +796,8 @@ static int ingenic_adc_probe(struct platform_device *pdev) iio_dev->dev.parent = dev; iio_dev->name = "jz-adc"; - iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + iio_dev->setup_ops = &ingenic_buffer_setup_ops; iio_dev->channels = soc_data->channels; iio_dev->num_channels = soc_data->num_channels; iio_dev->info = &ingenic_adc_info; -- 2.7.4