From b82396122b028a07ce2977e3f33123d7ab526d91 Mon Sep 17 00:00:00 2001 From: Simon Trimmer Date: Fri, 14 Apr 2023 14:37:50 +0100 Subject: [PATCH] ASoC: cs35l56: Allow a wider range for reset pulse width There is no reason to have such a tight usleep range of 400us and it is acceptable to allow MIN_US * 2. Also wrap the usleep in an inline function. Signed-off-by: Simon Trimmer Signed-off-by: Richard Fitzgerald Link: https://lore.kernel.org/r/168147949455.26.3401634900657387799@mailman-core.alsa-project.org Signed-off-by: Mark Brown --- sound/soc/codecs/cs35l56.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 5ea7f41..d600951 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -835,6 +835,12 @@ static int cs35l56_wait_for_firmware_boot(struct cs35l56_private *cs35l56) return 0; } +static inline void cs35l56_wait_min_reset_pulse(void) +{ + /* Satisfy minimum reset pulse width spec */ + usleep_range(CS35L56_RESET_PULSE_MIN_US, 2 * CS35L56_RESET_PULSE_MIN_US); +} + static const struct reg_sequence cs35l56_system_reset_seq[] = { REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_SYSTEM_RESET), }; @@ -1236,7 +1242,7 @@ int cs35l56_system_suspend_late(struct device *dev) */ if (cs35l56->reset_gpio) { gpiod_set_value_cansleep(cs35l56->reset_gpio, 0); - usleep_range(CS35L56_RESET_PULSE_MIN_US, CS35L56_RESET_PULSE_MIN_US + 400); + cs35l56_wait_min_reset_pulse(); } regulator_bulk_disable(ARRAY_SIZE(cs35l56->supplies), cs35l56->supplies); @@ -1289,7 +1295,7 @@ int cs35l56_system_resume_early(struct device *dev) /* Ensure a spec-compliant RESET pulse. */ if (cs35l56->reset_gpio) { gpiod_set_value_cansleep(cs35l56->reset_gpio, 0); - usleep_range(CS35L56_RESET_PULSE_MIN_US, CS35L56_RESET_PULSE_MIN_US + 400); + cs35l56_wait_min_reset_pulse(); } /* Enable supplies before releasing RESET. */ @@ -1440,9 +1446,7 @@ int cs35l56_common_probe(struct cs35l56_private *cs35l56) return dev_err_probe(cs35l56->dev, ret, "Failed to enable supplies\n"); if (cs35l56->reset_gpio) { - /* satisfy minimum reset pulse width spec */ - usleep_range(CS35L56_RESET_PULSE_MIN_US, - CS35L56_RESET_PULSE_MIN_US + 400); + cs35l56_wait_min_reset_pulse(); gpiod_set_value_cansleep(cs35l56->reset_gpio, 1); } -- 2.7.4