From b725abad348d1f4fea8771eb23452eec2b7fe65f Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Fri, 18 Jun 2010 09:23:19 +0200 Subject: [PATCH] pca100: clean up GPIO pin multiplexing cleaned up some duplicated mxc_gpio_mode calls and move the correpsonding pin multiplexing either into the initial pin config table or ifdef blocks. Signed-off-by: Luotao Fu Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/mach-pca100.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c index a943436639..2164b7f 100644 --- a/arch/arm/mach-mx2/mach-pca100.c +++ b/arch/arm/mach-mx2/mach-pca100.c @@ -55,6 +55,9 @@ #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) +#define SPI1_SS0 (GPIO_PORTD + 28) +#define SPI1_SS1 (GPIO_PORTD + 27) +#define SD2_CD (GPIO_PORTC + 29) static int pca100_pins[] = { /* UART1 */ @@ -69,6 +72,7 @@ static int pca100_pins[] = { PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, + SD2_CD | GPIO_GPIO | GPIO_IN, /* FEC */ PD0_AIN_FEC_TXD0, PD1_AIN_FEC_TXD1, @@ -156,6 +160,10 @@ static int pca100_pins[] = { PA28_PF_HSYNC, PA29_PF_VSYNC, PA31_PF_OE_ACD, + /* free GPIO */ + GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */ + GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */ + GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */ }; static struct imxuart_platform_data uart_pdata = { @@ -214,7 +222,7 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = { }, }; -static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27}; +static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1}; static struct spi_imx_master pca100_spi_0_data = { .chipselect = pca100_spi_cs, @@ -388,7 +396,6 @@ static void __init pca100_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); mxc_register_device(&imx27_nand_device, &pca100_nand_board_info); @@ -399,17 +406,9 @@ static void __init pca100_init(void) mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data); - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT); - - /* GPIO0_IRQ */ - mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN); - /* GPIO1_IRQ */ - mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN); - /* GPIO2_IRQ */ - mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN); - #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); + mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data); -- 2.7.4