From b6e80e24857a273e6c5c89e74f5d6a918dd2563f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 29 Mar 2012 02:22:50 +0000 Subject: [PATCH] mx6qsabrelite: Add boot switch setting information into the README Add boot switch setting information into the README Signed-off-by: Fabio Estevam --- doc/README.mx6qsabrelite | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/doc/README.mx6qsabrelite b/doc/README.mx6qsabrelite index 0498cba..6f2f534 100644 --- a/doc/README.mx6qsabrelite +++ b/doc/README.mx6qsabrelite @@ -31,7 +31,8 @@ Note: Replace sXx with the device representing the SD card in your system. Note: This writes SD card loader at address 0 2. Put this SD card into the slot for the large SD card (SD3 on the bottom of -the board) +the board). Make sure SW1 switch is at position "00", so that it can boot +from the fuses. 3. Power-up the SabreLite, press 'space' to enter command mode in the U-Boot (the default one the board is shipped with, starting from the SPI NOR) and -- 2.7.4