From b4b830a34d8046633231b7fe87f6f2cb6240dc9f Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Tue, 19 Jul 2022 18:35:40 +0300 Subject: [PATCH] platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity Fix error flow: - Clean-up client object in case of probing failure. - Prevent running remove routine in case of probing failure. Probing and removing are invoked by hotplug events raised upon line card insertion and removing. If probing procedure failed all data is cleared and there is nothing to do in remove routine. Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Signed-off-by: Vadim Pasternak Link: https://lore.kernel.org/r/20220719153540.61304-1-vadimp@nvidia.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/mellanox/mlxreg-lc.c | 82 +++++++++++++++++++++++++++-------- 1 file changed, 63 insertions(+), 19 deletions(-) diff --git a/drivers/platform/mellanox/mlxreg-lc.c b/drivers/platform/mellanox/mlxreg-lc.c index c897a2f..55834cc 100644 --- a/drivers/platform/mellanox/mlxreg-lc.c +++ b/drivers/platform/mellanox/mlxreg-lc.c @@ -716,8 +716,12 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap, switch (regval) { case MLXREG_LC_SN4800_C16: err = mlxreg_lc_sn4800_c16_config_init(mlxreg_lc, regmap, data); - if (err) + if (err) { + dev_err(dev, "Failed to config client %s at bus %d at addr 0x%02x\n", + data->hpdev.brdinfo->type, data->hpdev.nr, + data->hpdev.brdinfo->addr); return err; + } break; default: return -ENODEV; @@ -730,8 +734,11 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap, mlxreg_lc->mux = platform_device_register_resndata(dev, "i2c-mux-mlxcpld", data->hpdev.nr, NULL, 0, mlxreg_lc->mux_data, sizeof(*mlxreg_lc->mux_data)); - if (IS_ERR(mlxreg_lc->mux)) + if (IS_ERR(mlxreg_lc->mux)) { + dev_err(dev, "Failed to create mux infra for client %s at bus %d at addr 0x%02x\n", + data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr); return PTR_ERR(mlxreg_lc->mux); + } /* Register IO access driver. */ if (mlxreg_lc->io_data) { @@ -740,6 +747,9 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap, platform_device_register_resndata(dev, "mlxreg-io", data->hpdev.nr, NULL, 0, mlxreg_lc->io_data, sizeof(*mlxreg_lc->io_data)); if (IS_ERR(mlxreg_lc->io_regs)) { + dev_err(dev, "Failed to create regio for client %s at bus %d at addr 0x%02x\n", + data->hpdev.brdinfo->type, data->hpdev.nr, + data->hpdev.brdinfo->addr); err = PTR_ERR(mlxreg_lc->io_regs); goto fail_register_io; } @@ -753,6 +763,9 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap, mlxreg_lc->led_data, sizeof(*mlxreg_lc->led_data)); if (IS_ERR(mlxreg_lc->led)) { + dev_err(dev, "Failed to create LED objects for client %s at bus %d at addr 0x%02x\n", + data->hpdev.brdinfo->type, data->hpdev.nr, + data->hpdev.brdinfo->addr); err = PTR_ERR(mlxreg_lc->led); goto fail_register_led; } @@ -809,7 +822,8 @@ static int mlxreg_lc_probe(struct platform_device *pdev) if (!data->hpdev.adapter) { dev_err(&pdev->dev, "Failed to get adapter for bus %d\n", data->hpdev.nr); - return -EFAULT; + err = -EFAULT; + goto i2c_get_adapter_fail; } /* Create device at the top of line card I2C tree.*/ @@ -818,32 +832,40 @@ static int mlxreg_lc_probe(struct platform_device *pdev) if (IS_ERR(data->hpdev.client)) { dev_err(&pdev->dev, "Failed to create client %s at bus %d at addr 0x%02x\n", data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr); - - i2c_put_adapter(data->hpdev.adapter); - data->hpdev.adapter = NULL; - return PTR_ERR(data->hpdev.client); + err = PTR_ERR(data->hpdev.client); + goto i2c_new_device_fail; } regmap = devm_regmap_init_i2c(data->hpdev.client, &mlxreg_lc_regmap_conf); if (IS_ERR(regmap)) { + dev_err(&pdev->dev, "Failed to create regmap for client %s at bus %d at addr 0x%02x\n", + data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr); err = PTR_ERR(regmap); - goto mlxreg_lc_probe_fail; + goto devm_regmap_init_i2c_fail; } /* Set default registers. */ for (i = 0; i < mlxreg_lc_regmap_conf.num_reg_defaults; i++) { err = regmap_write(regmap, mlxreg_lc_regmap_default[i].reg, mlxreg_lc_regmap_default[i].def); - if (err) - goto mlxreg_lc_probe_fail; + if (err) { + dev_err(&pdev->dev, "Failed to set default regmap %d for client %s at bus %d at addr 0x%02x\n", + i, data->hpdev.brdinfo->type, data->hpdev.nr, + data->hpdev.brdinfo->addr); + goto regmap_write_fail; + } } /* Sync registers with hardware. */ regcache_mark_dirty(regmap); err = regcache_sync(regmap); - if (err) - goto mlxreg_lc_probe_fail; + if (err) { + dev_err(&pdev->dev, "Failed to sync regmap for client %s at bus %d at addr 0x%02x\n", + data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr); + err = PTR_ERR(regmap); + goto regcache_sync_fail; + } par_pdata = data->hpdev.brdinfo->platform_data; mlxreg_lc->par_regmap = par_pdata->regmap; @@ -854,12 +876,27 @@ static int mlxreg_lc_probe(struct platform_device *pdev) /* Configure line card. */ err = mlxreg_lc_config_init(mlxreg_lc, regmap, data); if (err) - goto mlxreg_lc_probe_fail; + goto mlxreg_lc_config_init_fail; return err; -mlxreg_lc_probe_fail: +mlxreg_lc_config_init_fail: +regcache_sync_fail: +regmap_write_fail: +devm_regmap_init_i2c_fail: + if (data->hpdev.client) { + i2c_unregister_device(data->hpdev.client); + data->hpdev.client = NULL; + } +i2c_new_device_fail: i2c_put_adapter(data->hpdev.adapter); + data->hpdev.adapter = NULL; +i2c_get_adapter_fail: + /* Clear event notification callback and handle. */ + if (data->notifier) { + data->notifier->user_handler = NULL; + data->notifier->handle = NULL; + } return err; } @@ -868,11 +905,18 @@ static int mlxreg_lc_remove(struct platform_device *pdev) struct mlxreg_core_data *data = dev_get_platdata(&pdev->dev); struct mlxreg_lc *mlxreg_lc = platform_get_drvdata(pdev); - /* Clear event notification callback. */ - if (data->notifier) { - data->notifier->user_handler = NULL; - data->notifier->handle = NULL; - } + /* + * Probing and removing are invoked by hotplug events raised upon line card insertion and + * removing. If probing procedure fails all data is cleared. However, hotplug event still + * will be raised on line card removing and activate removing procedure. In this case there + * is nothing to remove. + */ + if (!data->notifier || !data->notifier->handle) + return 0; + + /* Clear event notification callback and handle. */ + data->notifier->user_handler = NULL; + data->notifier->handle = NULL; /* Destroy static I2C device feeding by main power. */ mlxreg_lc_destroy_static_devices(mlxreg_lc, mlxreg_lc->main_devs, -- 2.7.4