From b35bbd3d71872d35df17c40b4e4423855d8c5e6f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 29 Jun 2018 13:51:06 +1000 Subject: [PATCH] ARM: dts: aspeed: Enable vhub on port A of AST2500 EVB This is an eval board, it makes sense to enable many functions by default. This changes the device-tree to set port A to be a USB device and leave port B as a host, along with a little comment explaining how to change it. (the vhub device can only exist on port A on this SoC) Signed-off-by: Benjamin Herrenschmidt Acked-by: Andrew Jeffery Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-ast2500-evb.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 2bff1b2..2375449 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -80,7 +80,13 @@ }; }; -&ehci0 { +/* + * Enable port A as device (via the virtual hub) and port B as + * host by default on the eval board. This can be easily changed + * by replacing the override below with &ehci0 { ... } to enable + * host on both ports. + */ +&vhub { status = "okay"; }; -- 2.7.4