From b34e96bdcf2908086a5993827bce1114576a2e75 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 17 Mar 2015 17:15:48 +0100 Subject: [PATCH] USB: atmel: update DT bindings documentation Add documentation for the missing clocks, clock-names, reg and interrupts properties. Signed-off-by: Boris Brezillon Signed-off-by: Nicolas Ferre --- .../devicetree/bindings/usb/atmel-usb.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index e180d56..1be8d7a 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -5,6 +5,13 @@ OHCI Required properties: - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers used in host mode. + - reg: Address and length of the register set for the device + - interrupts: Should contain ehci interrupt + - clocks: Should reference the peripheral, host and system clocks + - clock-names: Should contains two strings + "ohci_clk" for the peripheral clock + "hclk" for the host clock + "uhpck" for the system clock - num-ports: Number of ports. - atmel,vbus-gpio: If present, specifies a gpio that needs to be activated for the bus to be powered. @@ -14,6 +21,8 @@ Required properties: usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; interrupts = <20 4>; num-ports = <2>; }; @@ -23,11 +32,19 @@ EHCI Required properties: - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers used in host mode. + - reg: Address and length of the register set for the device + - interrupts: Should contain ehci interrupt + - clocks: Should reference the peripheral and the UTMI clocks + - clock-names: Should contains two strings + "ehci_clk" for the peripheral clock + "usb_clk" for the UTMI clock usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 4>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; }; AT91 USB device controller @@ -53,6 +70,8 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 4>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; atmel,vbus-gpio = <&pioC 5 0>; }; @@ -65,6 +84,10 @@ Required properties: "sama5d3-udc" - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt + - clocks: Should reference the peripheral and host clocks + - clock-names: Should contains two strings + "pclk" for the peripheral clock + "hclk" for the host clock - ep childnode: To specify the number of endpoints and their properties. Optional properties: @@ -86,6 +109,8 @@ usb2: gadget@fff78000 { reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 4 0>; + clocks = <&utmi>, <&udphs_clk>; + clock-names = "hclk", "pclk"; atmel,vbus-gpio = <&pioB 19 0>; ep0 { -- 2.7.4