From b0cc1b846fcb310c0ac2f8cbeb4ed5947dc52912 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Wed, 27 Feb 2019 15:36:44 +0100 Subject: [PATCH] dm: spi: Read default speed and mode values from DT This patch update the behavior introduced by commit 96907c0fe50a ("dm: spi: Read default speed and mode values from DT") In case of DT boot, don't read default speed and mode for SPI from CONFIG_* but instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Remove also use in boards of the value speed=0 (no more supported) for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0. DT values will be always used when available (full DM support of SPI slave with available DT node) even if speed and mode are requested; for example in splash screen support (in splash_sf_read_raw) or in SPL boot (in spl_spi_load_image). The caller of spi_get_bus_and_cs() no more need to force speed=0. But the current behavior don't change if the SPI slave is not present (device with generic driver is created automatically) or if platdata is used (CONFIG_OF_PLATDATA). Signed-off-by: Patrick Delaunay Acked-by: Jagan Teki --- cmd/sf.c | 3 +-- common/spl/spl_spi.c | 2 ++ configs/da850_am18xxevm_defconfig | 4 ---- configs/da850evm_defconfig | 4 ---- configs/mscc_jr2_defconfig | 4 ---- configs/mscc_luton_defconfig | 4 ---- configs/mscc_ocelot_defconfig | 4 ---- configs/mscc_serval_defconfig | 4 ---- configs/mscc_servalt_defconfig | 4 ---- drivers/mtd/spi/Kconfig | 6 ++++++ drivers/spi/spi-uclass.c | 4 +++- include/spi.h | 9 +++++---- 12 files changed, 17 insertions(+), 35 deletions(-) diff --git a/cmd/sf.c b/cmd/sf.c index 738ef0e..6ccf98a 100644 --- a/cmd/sf.c +++ b/cmd/sf.c @@ -81,14 +81,13 @@ static int do_spi_flash_probe(int argc, char * const argv[]) { unsigned int bus = CONFIG_SF_DEFAULT_BUS; unsigned int cs = CONFIG_SF_DEFAULT_CS; + /* In DM mode, defaults speed and mode will be taken from DT */ unsigned int speed = CONFIG_SF_DEFAULT_SPEED; unsigned int mode = CONFIG_SF_DEFAULT_MODE; char *endp; #ifdef CONFIG_DM_SPI_FLASH struct udevice *new, *bus_dev; int ret; - /* In DM mode defaults will be taken from DT */ - speed = 0, mode = 0; #else struct spi_flash *new; #endif diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index 8cd4830..9b74473 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -77,6 +77,8 @@ static int spl_spi_load_image(struct spl_image_info *spl_image, /* * Load U-Boot image from SPI flash into RAM + * In DM mode: defaults speed and mode will be + * taken from DT when available */ flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig index b8c16ba..4192241 100644 --- a/configs/da850_am18xxevm_defconfig +++ b/configs/da850_am18xxevm_defconfig @@ -39,10 +39,6 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="da850-evm" CONFIG_SPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=0 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0 CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_DA8XX_GPIO=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index 3ee7943..41dae05 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -41,10 +41,6 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="da850-evm" CONFIG_SPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=0 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0 CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_DM_GPIO=y diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig index 95562b7..9276df2 100644 --- a/configs/mscc_jr2_defconfig +++ b/configs/mscc_jr2_defconfig @@ -38,10 +38,6 @@ CONFIG_OF_LIST="jr2_pcb110 jr2_pcb111 serval2_pcb112" CONFIG_DTB_RESELECT=y CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=0 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CLK=y CONFIG_DM_GPIO=y diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig index 162a514..0fdd9b8 100644 --- a/configs/mscc_luton_defconfig +++ b/configs/mscc_luton_defconfig @@ -44,10 +44,6 @@ CONFIG_OF_LIST="luton_pcb090 luton_pcb091" CONFIG_DTB_RESELECT=y CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=0 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CLK=y CONFIG_DM_GPIO=y diff --git a/configs/mscc_ocelot_defconfig b/configs/mscc_ocelot_defconfig index b0dcfaf..edc476d 100644 --- a/configs/mscc_ocelot_defconfig +++ b/configs/mscc_ocelot_defconfig @@ -43,10 +43,6 @@ CONFIG_OF_LIST="ocelot_pcb120 ocelot_pcb123" CONFIG_DTB_RESELECT=y CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=0 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CLK=y CONFIG_DM_GPIO=y diff --git a/configs/mscc_serval_defconfig b/configs/mscc_serval_defconfig index f2c9563..146188b 100644 --- a/configs/mscc_serval_defconfig +++ b/configs/mscc_serval_defconfig @@ -35,10 +35,6 @@ CONFIG_OF_LIST="serval_pcb106 serval_pcb105" CONFIG_DTB_RESELECT=y CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=0 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CLK=y CONFIG_DM_GPIO=y diff --git a/configs/mscc_servalt_defconfig b/configs/mscc_servalt_defconfig index 027aaa4..a450f48 100644 --- a/configs/mscc_servalt_defconfig +++ b/configs/mscc_servalt_defconfig @@ -33,10 +33,6 @@ CONFIG_DEFAULT_DEVICE_TREE="servalt_pcb116" CONFIG_DTB_RESELECT=y CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=0 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CLK=y CONFIG_DM_GPIO=y diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 5671bca..d3b007a 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -62,6 +62,9 @@ config SF_DEFAULT_MODE The default mode may be provided by the platform to handle the common case when only a single serial flash is present on the system. + Not used for boot with device tree; the SPI driver reads + speed and mode from platdata values computed from + available node. config SF_DEFAULT_SPEED int "SPI Flash default speed in Hz" @@ -71,6 +74,9 @@ config SF_DEFAULT_SPEED The default speed may be provided by the platform to handle the common case when only a single serial flash is present on the system. + Not used for boot with device tree; the SPI driver reads + speed and mode from platdata values computed from + available node. if SPI_FLASH diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c index 2bc289a..88cb2a1 100644 --- a/drivers/spi/spi-uclass.c +++ b/drivers/spi/spi-uclass.c @@ -328,7 +328,9 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode, } plat = dev_get_parent_platdata(dev); - if (!speed) { + + /* get speed and mode from platdata when available */ + if (plat->max_hz) { speed = plat->max_hz; mode = plat->mode; } diff --git a/include/spi.h b/include/spi.h index 92427e5..3785941 100644 --- a/include/spi.h +++ b/include/spi.h @@ -496,14 +496,15 @@ int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp, * device and slave device. * * If no such slave exists, and drv_name is not NULL, then a new slave device - * is automatically bound on this chip select. + * is automatically bound on this chip select with requested speed and mode. * - * Ths new slave device is probed ready for use with the given speed and mode. + * Ths new slave device is probed ready for use with the speed and mode + * from platdata when available or the requested values. * * @busnum: SPI bus number * @cs: Chip select to look for - * @speed: SPI speed to use for this slave - * @mode: SPI mode to use for this slave + * @speed: SPI speed to use for this slave when not available in platdata + * @mode: SPI mode to use for this slave when not available in platdata * @drv_name: Name of driver to attach to this chip select * @dev_name: Name of the new device thus created * @busp: Returns bus device -- 2.7.4