From b02914af4d7020828ce921a572589dd793517c09 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 10 Dec 2009 17:35:01 -0600 Subject: [PATCH] b43: Allow PIO mode to be selected at module load If userencounter the "Fatal DMA Problem" with a BCM43XX device, and still wish to use b43 as the driver, their only option is to rebuild the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and allows PIO mode to be selected with a load-time parameter for the module. Note that the configuration variable CONFIG_B43_PIO is also removed. Once the DMA problem with the BCM4312 devices is solved, this patch will likely be reverted. Signed-off-by: Larry Finger Tested-by: John Daiker Signed-off-by: John W. Linville --- drivers/net/wireless/b43/Kconfig | 17 +---------------- drivers/net/wireless/b43/Makefile | 2 +- drivers/net/wireless/b43/b43.h | 13 ------------- drivers/net/wireless/b43/dma.c | 2 -- drivers/net/wireless/b43/main.c | 9 ++++++--- drivers/net/wireless/b43/pio.h | 40 --------------------------------------- 6 files changed, 8 insertions(+), 75 deletions(-) diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 64c12e1..073be56 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -3,6 +3,7 @@ config B43 depends on SSB_POSSIBLE && MAC80211 && HAS_DMA select SSB select FW_LOADER + select SSB_BLOCKIO ---help--- b43 is a driver for the Broadcom 43xx series wireless devices. @@ -78,14 +79,6 @@ config B43_SDIO If unsure, say N. -# Data transfers to the device via PIO -# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly. -config B43_PIO - bool - depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO) - select SSB_BLOCKIO - default y - config B43_NPHY bool "Pre IEEE 802.11n support (BROKEN)" depends on B43 && EXPERIMENTAL && BROKEN @@ -137,12 +130,4 @@ config B43_DEBUG for production use. Only say Y, if you are debugging a problem in the b43 driver sourcecode. -config B43_FORCE_PIO - bool "Force usage of PIO instead of DMA" - depends on B43 && B43_DEBUG - ---help--- - This will disable DMA and always enable PIO instead. - Say N! - This is only for debugging the PIO engine code. You do - _NOT_ want to enable this. diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile index 84772a2..5e83b6f 100644 --- a/drivers/net/wireless/b43/Makefile +++ b/drivers/net/wireless/b43/Makefile @@ -12,7 +12,7 @@ b43-y += xmit.o b43-y += lo.o b43-y += wa.o b43-y += dma.o -b43-$(CONFIG_B43_PIO) += pio.o +b43-y += pio.o b43-y += rfkill.o b43-$(CONFIG_B43_LEDS) += leds.o b43-$(CONFIG_B43_PCMCIA) += pcmcia.o diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fe3bf94..2f12a75 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -821,11 +821,9 @@ struct b43_wl { /* The device LEDs. */ struct b43_leds leds; -#ifdef CONFIG_B43_PIO /* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */ u8 pio_scratchspace[110] __attribute__((__aligned__(8))); u8 pio_tailspace[4] __attribute__((__aligned__(8))); -#endif /* CONFIG_B43_PIO */ }; static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw) @@ -876,20 +874,9 @@ static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value) static inline bool b43_using_pio_transfers(struct b43_wldev *dev) { -#ifdef CONFIG_B43_PIO return dev->__using_pio_transfers; -#else - return 0; -#endif } -#ifdef CONFIG_B43_FORCE_PIO -# define B43_FORCE_PIO 1 -#else -# define B43_FORCE_PIO 0 -#endif - - /* Message printing */ void b43info(struct b43_wl *wl, const char *fmt, ...) __attribute__ ((format(printf, 2, 3))); diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 027be27..5dd8a21 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1760,7 +1760,6 @@ void b43_dma_tx_resume(struct b43_wldev *dev) b43_power_saving_ctl_bits(dev, 0); } -#ifdef CONFIG_B43_PIO static void direct_fifo_rx(struct b43_wldev *dev, enum b43_dmatype type, u16 mmio_base, bool enable) { @@ -1794,4 +1793,3 @@ void b43_dma_direct_fifo_rx(struct b43_wldev *dev, mmio_base = b43_dmacontroller_base(type, engine_index); direct_fifo_rx(dev, type, mmio_base, enable); } -#endif /* CONFIG_B43_PIO */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 19b4eae..b0b5ce9 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -102,6 +102,9 @@ int b43_modparam_verbose = B43_VERBOSITY_DEFAULT; module_param_named(verbose, b43_modparam_verbose, int, 0644); MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug"); +static int modparam_pio; +module_param_named(pio, modparam_pio, int, 0444); +MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode"); static const struct ssb_device_id b43_ssb_tbl[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5), @@ -1786,8 +1789,8 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev) dma_reason[4], dma_reason[5]); b43err(dev->wl, "This device does not support DMA " "on your system. Please use PIO instead.\n"); - b43err(dev->wl, "CONFIG_B43_FORCE_PIO must be set in " - "your kernel configuration.\n"); + b43err(dev->wl, "Unload the b43 module and reload " + "with 'pio=1'\n"); return; } if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { @@ -4353,7 +4356,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev) if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) || - B43_FORCE_PIO) { + modparam_pio) { dev->__using_pio_transfers = 1; err = b43_pio_init(dev); } else { diff --git a/drivers/net/wireless/b43/pio.h b/drivers/net/wireless/b43/pio.h index 7dd649c9..7b3c42f 100644 --- a/drivers/net/wireless/b43/pio.h +++ b/drivers/net/wireless/b43/pio.h @@ -55,8 +55,6 @@ #define B43_PIO_MAX_NR_TXPACKETS 32 -#ifdef CONFIG_B43_PIO - struct b43_pio_txpacket { /* Pointer to the TX queue we belong to. */ struct b43_pio_txqueue *queue; @@ -169,42 +167,4 @@ void b43_pio_rx(struct b43_pio_rxqueue *q); void b43_pio_tx_suspend(struct b43_wldev *dev); void b43_pio_tx_resume(struct b43_wldev *dev); - -#else /* CONFIG_B43_PIO */ - - -static inline int b43_pio_init(struct b43_wldev *dev) -{ - return 0; -} -static inline void b43_pio_free(struct b43_wldev *dev) -{ -} -static inline void b43_pio_stop(struct b43_wldev *dev) -{ -} -static inline int b43_pio_tx(struct b43_wldev *dev, - struct sk_buff *skb) -{ - return 0; -} -static inline void b43_pio_handle_txstatus(struct b43_wldev *dev, - const struct b43_txstatus *status) -{ -} -static inline void b43_pio_get_tx_stats(struct b43_wldev *dev, - struct ieee80211_tx_queue_stats *stats) -{ -} -static inline void b43_pio_rx(struct b43_pio_rxqueue *q) -{ -} -static inline void b43_pio_tx_suspend(struct b43_wldev *dev) -{ -} -static inline void b43_pio_tx_resume(struct b43_wldev *dev) -{ -} - -#endif /* CONFIG_B43_PIO */ #endif /* B43_PIO_H_ */ -- 2.7.4