From aebf7e62708ba706ee7bf484c9023b15c214e92a Mon Sep 17 00:00:00 2001 From: Andrew Halaney Date: Wed, 18 Jan 2023 10:56:38 -0600 Subject: [PATCH] net: stmmac: enable all safety features by default [ Upstream commit fdfc76a116b5e9d3e98e6c96fe83b42d011d21d4 ] In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features. Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai Signed-off-by: Andrew Halaney Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c index 9c2d40f..413f660 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c @@ -186,11 +186,25 @@ static void dwmac5_handle_dma_err(struct net_device *ndev, int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp, struct stmmac_safety_feature_cfg *safety_feat_cfg) { + struct stmmac_safety_feature_cfg all_safety_feats = { + .tsoee = 1, + .mrxpee = 1, + .mestee = 1, + .mrxee = 1, + .mtxee = 1, + .epsi = 1, + .edpp = 1, + .prtyen = 1, + .tmouten = 1, + }; u32 value; if (!asp) return -EINVAL; + if (!safety_feat_cfg) + safety_feat_cfg = &all_safety_feats; + /* 1. Enable Safety Features */ value = readl(ioaddr + MTL_ECC_CONTROL); value |= MEEAO; /* MTL ECC Error Addr Status Override */ -- 2.7.4