From aea4762fb46e048c059ff49565ee33da07c8aeb3 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Sun, 23 Sep 2018 20:31:46 -0500 Subject: [PATCH] ARM: dts: da850-lego-ev3: slow down A/DC as much as possible Due to the electrical design of the A/DC circuits on LEGO MINDSTORMS EV3, if we are reading analog values as fast as possible (i.e. using DMA to service the SPI) the A/DC chip will read incorrect values - as much as 0.1V off when the SPI is running at 10MHz. (This has to do with the capacitor charge time when channels are muxed in the A/DC.) This patch slows down the SPI as much as possible (if CPU is at 456MHz, SPI runs at 1/2 of that, so 228MHz and has a max prescalar of 256, so we could get ~891kHz, but we're just rounding it to 1MHz). We also use the max allowable value for WDELAY to slow things down even more. These changes reduce the error of the analog values to about 5mV, which is tolerable. Commits a3762b13a596 ("spi: spi-davinci: Add support for SPI_CS_WORD") and e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage") introduce changes that allow DMA transfers to be used, so this slow down is needed now. Signed-off-by: David Lechner Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-lego-ev3.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index c4729d0..66fcadf 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -352,7 +352,8 @@ compatible = "ti,ads7957"; reg = <3>; #io-channel-cells = <1>; - spi-max-frequency = <10000000>; + spi-max-frequency = <1000000>; + ti,spi-wdelay = <63>; vref-supply = <&adc_ref>; }; }; -- 2.7.4