From ae4c86a024f634d5523e048a68635ae62765fcc4 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 20 Mar 2021 19:19:58 -0700 Subject: [PATCH] dt-bindings: input: atmel_mxt_ts: Document atmel,wakeup-method and WAKE line GPIO Some Atmel touchscreen controllers have a WAKE line that needs to be asserted low in order to wake up controller from a deep sleep. Document the wakeup methods and the new GPIO properties. Reviewed-by: Rob Herring Reviewed-by: Linus Walleij Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210302102158.10533-2-digetx@gmail.com Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/atmel,maxtouch.yaml | 29 ++++++++++++++++++++++ include/dt-bindings/input/atmel-maxtouch.h | 10 ++++++++ 2 files changed, 39 insertions(+) create mode 100644 include/dt-bindings/input/atmel-maxtouch.h diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index 8c6418f..e6b03a1 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -39,6 +39,13 @@ properties: (active low). The line must be flagged with GPIO_ACTIVE_LOW. + wake-gpios: + maxItems: 1 + description: + Optional GPIO specifier for the touchscreen's wake pin + (active low). The line must be flagged with + GPIO_ACTIVE_LOW. + linux,gpio-keymap: $ref: /schemas/types.yaml#/definitions/uint32-array description: | @@ -53,6 +60,26 @@ properties: or experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. + atmel,wakeup-method: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The WAKE line is an active-low input that is used to wake up the touch + controller from deep-sleep mode before communication with the controller + could be started. This optional feature used to minimize current + consumption when the controller is in deep sleep mode. This feature is + relevant only to some controller families, like mXT1386 controller for + example. + + The WAKE pin can be connected in one of the following ways: + 1) left permanently low + 2) connected to the I2C-compatible SCL pin + 3) connected to a GPIO pin on the host + enum: + - 0 # ATMEL_MXT_WAKEUP_NONE + - 1 # ATMEL_MXT_WAKEUP_I2C_SCL + - 2 # ATMEL_MXT_WAKEUP_GPIO + default: 0 + required: - compatible - reg @@ -63,6 +90,7 @@ additionalProperties: false examples: - | #include + #include #include i2c { #address-cells = <1>; @@ -75,6 +103,7 @@ examples: reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; vdda-supply = <&ab8500_ldo_aux2_reg>; vdd-supply = <&ab8500_ldo_aux5_reg>; + atmel,wakeup-method = ; }; }; diff --git a/include/dt-bindings/input/atmel-maxtouch.h b/include/dt-bindings/input/atmel-maxtouch.h new file mode 100644 index 0000000..7345ab3 --- /dev/null +++ b/include/dt-bindings/input/atmel-maxtouch.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _DT_BINDINGS_ATMEL_MAXTOUCH_H +#define _DT_BINDINGS_ATMEL_MAXTOUCH_H + +#define ATMEL_MXT_WAKEUP_NONE 0 +#define ATMEL_MXT_WAKEUP_I2C_SCL 1 +#define ATMEL_MXT_WAKEUP_GPIO 2 + +#endif /* _DT_BINDINGS_ATMEL_MAXTOUCH_H */ -- 2.7.4